1. 02 Jan, 2014 14 commits
    • Linus Torvalds's avatar
      Merge branch 'akpm' (incoming from Andrew) · 06f055f3
      Linus Torvalds authored
      Merge patches from Andrew Morton:
       "Ten fixes"
      
      * emailed patches from Andrew Morton <akpm@linux-foundation.org>:
        epoll: do not take the nested ep->mtx on EPOLL_CTL_DEL
        sh: add EXPORT_SYMBOL(min_low_pfn) and EXPORT_SYMBOL(max_low_pfn) to sh_ksyms_32.c
        drivers/dma/ioat/dma.c: check DMA mapping error in ioat_dma_self_test()
        mm/memory-failure.c: transfer page count from head page to tail page after split thp
        MAINTAINERS: set up proper record for Xilinx Zynq
        mm: remove bogus warning in copy_huge_pmd()
        memcg: fix memcg_size() calculation
        mm: fix use-after-free in sys_remap_file_pages
        mm: munlock: fix deadlock in __munlock_pagevec()
        mm: munlock: fix a bug where THP tail page is encountered
      06f055f3
    • Jason Baron's avatar
      epoll: do not take the nested ep->mtx on EPOLL_CTL_DEL · 4ff36ee9
      Jason Baron authored
      The EPOLL_CTL_DEL path of epoll contains a classic, ab-ba deadlock.
      That is, epoll_ctl(a, EPOLL_CTL_DEL, b, x), will deadlock with
      epoll_ctl(b, EPOLL_CTL_DEL, a, x).  The deadlock was introduced with
      commmit 67347fe4 ("epoll: do not take global 'epmutex' for simple
      topologies").
      
      The acquistion of the ep->mtx for the destination 'ep' was added such
      that a concurrent EPOLL_CTL_ADD operation would see the correct state of
      the ep (Specifically, the check for '!list_empty(&f.file->f_ep_links')
      
      However, by simply not acquiring the lock, we do not serialize behind
      the ep->mtx from the add path, and thus may perform a full path check
      when if we had waited a little longer it may not have been necessary.
      However, this is a transient state, and performing the full loop
      checking in this case is not harmful.
      
      The important point is that we wouldn't miss doing the full loop
      checking when required, since EPOLL_CTL_ADD always locks any 'ep's that
      its operating upon.  The reason we don't need to do lock ordering in the
      add path, is that we are already are holding the global 'epmutex'
      whenever we do the double lock.  Further, the original posting of this
      patch, which was tested for the intended performance gains, did not
      perform this additional locking.
      Signed-off-by: default avatarJason Baron <jbaron@akamai.com>
      Cc: Nathan Zimmer <nzimmer@sgi.com>
      Cc: Eric Wong <normalperson@yhbt.net>
      Cc: Nelson Elhage <nelhage@nelhage.com>
      Cc: Al Viro <viro@zeniv.linux.org.uk>
      Cc: Davide Libenzi <davidel@xmailserver.org>
      Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      4ff36ee9
    • Nobuhiro Iwamatsu's avatar
      sh: add EXPORT_SYMBOL(min_low_pfn) and EXPORT_SYMBOL(max_low_pfn) to sh_ksyms_32.c · ad70b029
      Nobuhiro Iwamatsu authored
      Min_low_pfn and max_low_pfn were used in pfn_valid macro if defined
      CONFIG_FLATMEM.  When the functions that use the pfn_valid is used in
      driver module, max_low_pfn and min_low_pfn is to undefined, and fail to
      build.
      
        ERROR: "min_low_pfn" [drivers/block/aoe/aoe.ko] undefined!
        ERROR: "max_low_pfn" [drivers/block/aoe/aoe.ko] undefined!
        make[2]: *** [__modpost] Error 1
        make[1]: *** [modules] Error 2
      
      This patch fix this problem.
      Signed-off-by: default avatarNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
      Cc: Kuninori Morimoto <kuninori.morimoto.gx@gmail.com>
      Cc: Paul Mundt <lethal@linux-sh.org>
      Cc: Geert Uytterhoeven <geert@linux-m68k.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      ad70b029
    • Jiang Liu's avatar
      drivers/dma/ioat/dma.c: check DMA mapping error in ioat_dma_self_test() · 3532e566
      Jiang Liu authored
      Check DMA mapping return values in function ioat_dma_self_test() to get
      rid of following warning message.
      
        ------------[ cut here ]------------
        WARNING: CPU: 0 PID: 1203 at lib/dma-debug.c:937 check_unmap+0x4c0/0x9a0()
        ioatdma 0000:00:04.0: DMA-API: device driver failed to check map error[device address=0x000000085191b000] [size=2000 bytes] [mapped as single]
        Modules linked in: ioatdma(+) mac_hid wmi acpi_pad lp parport hidd_generic usbhid hid ixgbe isci dca libsas ahci ptp libahci scsi_transport_sas meegaraid_sas pps_core mdio
        CPU: 0 PID: 1203 Comm: systemd-udevd Not tainted 3.13.0-rc4+ #8
        Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRIVTIIN1.86B.0044.L09.1311181644 11/18/2013
        Call Trace:
          dump_stack+0x4d/0x66
          warn_slowpath_common+0x7d/0xa0
          warn_slowpath_fmt+0x4c/0x50
          check_unmap+0x4c0/0x9a0
          debug_dma_unmap_page+0x81/0x90
          ioat_dma_self_test+0x3d2/0x680 [ioatdma]
          ioat3_dma_self_test+0x12/0x30 [ioatdma]
          ioat_probe+0xf4/0x110 [ioatdma]
          ioat3_dma_probe+0x268/0x410 [ioatdma]
          ioat_pci_probe+0x122/0x1b0 [ioatdma]
          local_pci_probe+0x45/0xa0
          pci_device_probe+0xd9/0x130
          driver_probe_device+0x171/0x490
          __driver_attach+0x93/0xa0
          bus_for_each_dev+0x6b/0xb0
          driver_attach+0x1e/0x20
          bus_add_driver+0x1f8/0x2b0
          driver_register+0x81/0x110
          __pci_register_driver+0x60/0x70
          ioat_init_module+0x89/0x1000 [ioatdma]
          do_one_initcall+0xe2/0x250
          load_module+0x2313/0x2a00
          SyS_init_module+0xd9/0x130
          system_call_fastpath+0x1a/0x1f
        ---[ end trace 990c591681d27c31 ]---
        Mapped at:
          debug_dma_map_page+0xbe/0x180
          ioat_dma_self_test+0x1ab/0x680 [ioatdma]
          ioat3_dma_self_test+0x12/0x30 [ioatdma]
          ioat_probe+0xf4/0x110 [ioatdma]
          ioat3_dma_probe+0x268/0x410 [ioatdma]
      Signed-off-by: default avatarJiang Liu <jiang.liu@linux.intel.com>
      Cc: Vinod Koul <vinod.koul@intel.com>
      Cc: Dan Williams <dan.j.williams@intel.com>
      Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
      Cc: Kyungmin Park <kyungmin.park@samsung.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      3532e566
    • Naoya Horiguchi's avatar
      mm/memory-failure.c: transfer page count from head page to tail page after split thp · a3e0f9e4
      Naoya Horiguchi authored
      Memory failures on thp tail pages cause kernel panic like below:
      
         mce: [Hardware Error]: Machine check events logged
         MCE exception done on CPU 7
         BUG: unable to handle kernel NULL pointer dereference at 0000000000000058
         IP: [<ffffffff811b7cd1>] dequeue_hwpoisoned_huge_page+0x131/0x1e0
         PGD bae42067 PUD ba47d067 PMD 0
         Oops: 0000 [#1] SMP
        ...
         CPU: 7 PID: 128 Comm: kworker/7:2 Tainted: G   M       O 3.13.0-rc4-131217-1558-00003-g83b7df08e462 #25
        ...
         Call Trace:
           me_huge_page+0x3e/0x50
           memory_failure+0x4bb/0xc20
           mce_process_work+0x3e/0x70
           process_one_work+0x171/0x420
           worker_thread+0x11b/0x3a0
           ? manage_workers.isra.25+0x2b0/0x2b0
           kthread+0xe4/0x100
           ? kthread_create_on_node+0x190/0x190
           ret_from_fork+0x7c/0xb0
           ? kthread_create_on_node+0x190/0x190
        ...
         RIP   dequeue_hwpoisoned_huge_page+0x131/0x1e0
         CR2: 0000000000000058
      
      The reasoning of this problem is shown below:
       - when we have a memory error on a thp tail page, the memory error
         handler grabs a refcount of the head page to keep the thp under us.
       - Before unmapping the error page from processes, we split the thp,
         where page refcounts of both of head/tail pages don't change.
       - Then we call try_to_unmap() over the error page (which was a tail
         page before). We didn't pin the error page to handle the memory error,
         this error page is freed and removed from LRU list.
       - We never have the error page on LRU list, so the first page state
         check returns "unknown page," then we move to the second check
         with the saved page flag.
       - The saved page flag have PG_tail set, so the second page state check
         returns "hugepage."
       - We call me_huge_page() for freed error page, then we hit the above panic.
      
      The root cause is that we didn't move refcount from the head page to the
      tail page after split thp.  So this patch suggests to do this.
      
      This panic was introduced by commit 524fca1e ("HWPOISON: fix
      misjudgement of page_action() for errors on mlocked pages").  Note that we
      did have the same refcount problem before this commit, but it was just
      ignored because we had only first page state check which returned "unknown
      page." The commit changed the refcount problem from "doesn't work" to
      "kernel panic."
      Signed-off-by: default avatarNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
      Reviewed-by: default avatarWanpeng Li <liwanp@linux.vnet.ibm.com>
      Cc: Andi Kleen <andi@firstfloor.org>
      Cc: <stable@vger.kernel.org>	[3.9+]
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      a3e0f9e4
    • Michal Simek's avatar
      MAINTAINERS: set up proper record for Xilinx Zynq · c2fd4e38
      Michal Simek authored
      Setup correct zynq entry.
       - Add missing cadence_ttc_timer maintainership
       - Add zynq wildcard
       - Add xilinx wildcard
      Signed-off-by: default avatarMichal Simek <michal.simek@xilinx.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      c2fd4e38
    • Mel Gorman's avatar
      mm: remove bogus warning in copy_huge_pmd() · d0319bd5
      Mel Gorman authored
      Sasha Levin reported the following warning being triggered
      
        WARNING: CPU: 28 PID: 35287 at mm/huge_memory.c:887 copy_huge_pmd+0x145/ 0x3a0()
        Call Trace:
          copy_huge_pmd+0x145/0x3a0
          copy_page_range+0x3f2/0x560
          dup_mmap+0x2c9/0x3d0
          dup_mm+0xad/0x150
          copy_process+0xa68/0x12e0
          do_fork+0x96/0x270
          SyS_clone+0x16/0x20
          stub_clone+0x69/0x90
      
      This warning was introduced by "mm: numa: Avoid unnecessary disruption
      of NUMA hinting during migration" for paranoia reasons but the warning
      is bogus.  I was thinking of parallel races between NUMA hinting faults
      and forks but this warning would also be triggered by a parallel reclaim
      splitting a THP during a fork.  Remote the bogus warning.
      Signed-off-by: default avatarMel Gorman <mgorman@suse.de>
      Reported-by: default avatarSasha Levin <sasha.levin@oracle.com>
      Cc: Alex Thorlton <athorlton@sgi.com>
      Cc: Rik van Riel <riel@redhat.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      d0319bd5
    • Vladimir Davydov's avatar
      memcg: fix memcg_size() calculation · 695c6083
      Vladimir Davydov authored
      The mem_cgroup structure contains nr_node_ids pointers to
      mem_cgroup_per_node objects, not the objects themselves.
      Signed-off-by: default avatarVladimir Davydov <vdavydov@parallels.com>
      Acked-by: default avatarMichal Hocko <mhocko@suse.cz>
      Cc: Glauber Costa <glommer@openvz.org>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Cc: Balbir Singh <bsingharora@gmail.com>
      Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      695c6083
    • Rik van Riel's avatar
      mm: fix use-after-free in sys_remap_file_pages · 4eb91982
      Rik van Riel authored
      remap_file_pages calls mmap_region, which may merge the VMA with other
      existing VMAs, and free "vma".  This can lead to a use-after-free bug.
      Avoid the bug by remembering vm_flags before calling mmap_region, and
      not trying to dereference vma later.
      Signed-off-by: default avatarRik van Riel <riel@redhat.com>
      Reported-by: default avatarDmitry Vyukov <dvyukov@google.com>
      Cc: PaX Team <pageexec@freemail.hu>
      Cc: Kees Cook <keescook@chromium.org>
      Cc: Michel Lespinasse <walken@google.com>
      Cc: Cyrill Gorcunov <gorcunov@openvz.org>
      Cc: Hugh Dickins <hughd@google.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      4eb91982
    • Vlastimil Babka's avatar
      mm: munlock: fix deadlock in __munlock_pagevec() · 3b25df93
      Vlastimil Babka authored
      Commit 7225522b ("mm: munlock: batch non-THP page isolation and
      munlock+putback using pagevec" introduced __munlock_pagevec() to speed
      up munlock by holding lru_lock over multiple isolated pages.  Pages that
      fail to be isolated are put_page()d immediately, also within the lock.
      
      This can lead to deadlock when __munlock_pagevec() becomes the holder of
      the last page pin and put_page() leads to __page_cache_release() which
      also locks lru_lock.  The deadlock has been observed by Sasha Levin
      using trinity.
      
      This patch avoids the deadlock by deferring put_page() operations until
      lru_lock is released.  Another pagevec (which is also used by later
      phases of the function is reused to gather the pages for put_page()
      operation.
      Signed-off-by: default avatarVlastimil Babka <vbabka@suse.cz>
      Reported-by: default avatarSasha Levin <sasha.levin@oracle.com>
      Cc: Michel Lespinasse <walken@google.com>
      Cc: Andrea Arcangeli <aarcange@redhat.com>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Hugh Dickins <hughd@google.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      3b25df93
    • Vlastimil Babka's avatar
      mm: munlock: fix a bug where THP tail page is encountered · c424be1c
      Vlastimil Babka authored
      Since commit ff6a6da6 ("mm: accelerate munlock() treatment of THP
      pages") munlock skips tail pages of a munlocked THP page.  However, when
      the head page already has PageMlocked unset, it will not skip the tail
      pages.
      
      Commit 7225522b ("mm: munlock: batch non-THP page isolation and
      munlock+putback using pagevec") has added a PageTransHuge() check which
      contains VM_BUG_ON(PageTail(page)).  Sasha Levin found this triggered
      using trinity, on the first tail page of a THP page without PageMlocked
      flag.
      
      This patch fixes the issue by skipping tail pages also in the case when
      PageMlocked flag is unset.  There is still a possibility of race with
      THP page split between clearing PageMlocked and determining how many
      pages to skip.  The race might result in former tail pages not being
      skipped, which is however no longer a bug, as during the skip the
      PageTail flags are cleared.
      
      However this race also affects correctness of NR_MLOCK accounting, which
      is to be fixed in a separate patch.
      Signed-off-by: default avatarVlastimil Babka <vbabka@suse.cz>
      Reported-by: default avatarSasha Levin <sasha.levin@oracle.com>
      Cc: Michel Lespinasse <walken@google.com>
      Cc: Andrea Arcangeli <aarcange@redhat.com>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Hugh Dickins <hughd@google.com>
      Cc: Bob Liu <bob.liu@oracle.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      c424be1c
    • Linus Torvalds's avatar
      Merge tag 'gfs2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes · 152b734a
      Linus Torvalds authored
      Pull GFS2 fixes from Steven Whitehouse:
       "Here is a set of small fixes for GFS2.  There is a fix to drop
        s_umount which is copied in from the core vfs, two patches relate to a
        hard to hit "use after free" and memory leak.  Two patches related to
        using DIO and buffered I/O on the same file to ensure correct
        operation in relation to glock state changes.  The final patch adds an
        RCU read lock to ensure correct locking on an error path"
      
      * tag 'gfs2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes:
        GFS2: Fix unsafe dereference in dump_holder()
        GFS2: Wait for async DIO in glock state changes
        GFS2: Fix incorrect invalidation for DIO/buffered I/O
        GFS2: Fix slab memory leak in gfs2_bufdata
        GFS2: Fix use-after-free race when calling gfs2_remove_from_ail
        GFS2: don't hold s_umount over blkdev_put
      152b734a
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux · b4796679
      Linus Torvalds authored
      Pull s390 fixes from Martin Schwidefsky:
       "Two small bug fixes and a follow-up to the CONFIG_NR_CPUS change.
      
        A kernel compiled with CONFIG_NR_CPUS=256 will waste quite a bit of
        memory for the per-cpu arrays.  Under z/VM the maximum number of CPUs
        is 64, the code now limits the possible cpu mask to 64 if running
        under z/VM"
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
        s390/pci: obtain function handle in hotplug notifier
        s390/3270: fix allocation of tty3270_screen structure
        s390/smp: improve setup of possible cpu mask
      b4796679
    • Tetsuo Handa's avatar
      GFS2: Fix unsafe dereference in dump_holder() · 0b3a2c99
      Tetsuo Handa authored
      GLOCK_BUG_ON() might call this function without RCU read lock. Make sure that
      RCU read lock is held when using task_struct returned from pid_task().
      Signed-off-by: default avatarTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
      Signed-off-by: default avatarSteven Whitehouse <swhiteho@redhat.com>
      0b3a2c99
  2. 01 Jan, 2014 4 commits
  3. 31 Dec, 2013 3 commits
  4. 30 Dec, 2013 19 commits
    • Linus Torvalds's avatar
      Merge tag 'dt-fixes-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux · 71ce176e
      Linus Torvalds authored
      Pull devicetree fixes from Rob Herring:
       - Fix 2 regressions found on PPC
       - Allow NULL ptr in unflatten_and_copy_device_tree
       - Update my email address
      
      * tag 'dt-fixes-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
        MAINTAINERS: Update Rob Herring's email address
        of/irq: Fix device_node refcount in of_irq_parse_raw()
        of/Kconfig: Spelling s/one/once/
        Revert "of/address: Handle #address-cells > 2 specially"
        of: Fix NULL dereference in unflatten_and_copy()
      71ce176e
    • Linus Torvalds's avatar
      Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc · 6e4c6196
      Linus Torvalds authored
      Pull powerpc fixes from Ben Herrenschmidt:
       "A bit more endian problems found during testing of 3.13 and a few
        other simple fixes and regressions fixes"
      
      * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
        powerpc: Fix alignment of secondary cpu spin vars
        powerpc: Align p_end
        powernv/eeh: Add buffer for P7IOC hub error data
        powernv/eeh: Fix possible buffer overrun in ioda_eeh_phb_diag()
        powerpc: Make 64-bit non-VMX __copy_tofrom_user bi-endian
        powerpc: Make unaligned accesses endian-safe for powerpc
        powerpc: Fix bad stack check in exception entry
        powerpc/512x: dts: disable MPC5125 usb module
        powerpc/512x: dts: remove misplaced IRQ spec from 'soc' node (5125)
      6e4c6196
    • Rob Herring's avatar
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · 67e0c1b0
      Linus Torvalds authored
      Pull networking fixes from David Miller:
       "Some holiday bug fixes for 3.13...  There is still one bug I'd like to
        get fixed before 3.13-final.
      
        The vlan code erroneously assignes the header ops of the underlying
        real device to the VLAN device above it when the real device can
        hardware offload VLAN handling.  That's completely bogus because
        header ops are tied to the device type, so they only expect to see a
        'dev' argument compatible with their ops.
      
        The fix is the have the VLAN code use a special set of header ops that
        does the pass-thru correctly, by calling the underlying real device's
        header ops but _also_ passing in the real device instead of the VLAN
        device.
      
        That fix is currently waiting some testing.
      
        Anyways, of note here:
      
         1) Fix bitmap edge case in radiotap, from Johannes Berg.
      
         2) Fix oops on driver unload in rtlwifi, from Larry Finger.
      
         3) Bonding doesn't do locking correctly during speed/duplex/link
            changes, from Ding Tianhong.
      
         4) Fix header parsing in GRE code, this bug has been around for a few
            releases.  From Timo Teräs.
      
         5) SIT tunnel driver MTU check needs to take GSO into account, from
            Eric Dumazet.
      
         6) Minor info leak in inet_diag, from Daniel Borkmann.
      
         7) Info leak in YAM hamradio driver, from Salva Peiró.
      
         8) Fix route expiration state handling in ipv6 routing code, from Li
            RongQing.
      
         9) DCCP probe module does not check request_module()'s return value,
            from Wang Weidong.
      
        10) cpsw driver passes NULL device names to request_irq(), from
            Mugunthan V N.
      
        11) Prevent a NULL splat in RDS binding code, from Sasha Levin.
      
        12) Fix 4G overflow test in tg3 driver, from Nithin Sujir.
      
        13) Cure use after free in arc_emac and fec driver's software
            timestamp handling, from Eric Dumazet.
      
        14) SIT driver can fail to release the route when
            iptunnel_handle_offloads() throws an error.  From Li RongQing.
      
        15) Several batman-adv fixes from Simon Wunderlich and Antonio
            Quartulli.
      
        16) Fix deadlock during TIPC socket release, from Ying Xue.
      
        17) Fix regression in ROSE protocol recvmsg() msg_name handling, from
            Florian Westphal.
      
        18) stmmac PTP support releases wrong spinlock, from Vince Bridgers"
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (73 commits)
        stmmac: Fix incorrect spinlock release and PTP cap detection.
        phy: IRQ cannot be shared
        net: rose: restore old recvmsg behavior
        xen-netback: fix guest-receive-side array sizes
        fec: Do not assume that PHY reset is active low
        tipc: fix deadlock during socket release
        netfilter: nf_tables: fix wrong datatype in nft_validate_data_load()
        batman-adv: fix vlan header access
        batman-adv: clean nf state when removing protocol header
        batman-adv: fix alignment for batadv_tvlv_tt_change
        batman-adv: fix size of batadv_bla_claim_dst
        batman-adv: fix size of batadv_icmp_header
        batman-adv: fix header alignment by unrolling batadv_header
        batman-adv: fix alignment for batadv_coded_packet
        netfilter: nf_tables: fix oops when updating table with user chains
        netfilter: nf_tables: fix dumping with large number of sets
        ipv6: release dst properly in ipip6_tunnel_xmit
        netxen: Correct off-by-one errors in bounds checks
        net: Add some clarification to skb_tx_timestamp() comment.
        arc_emac: fix potential use after free
        ...
      67e0c1b0
    • Rob Herring's avatar
      MAINTAINERS: Update Rob Herring's email address · 5d3ad8a6
      Rob Herring authored
      My Calxeda email address is going away.
      Signed-off-by: default avatarRob Herring <rob.herring@calxeda.com>
      Signed-off-by: default avatarRob Herring <robh@kernel.org>
      5d3ad8a6
    • Cédric Le Goater's avatar
      of/irq: Fix device_node refcount in of_irq_parse_raw() · 2f53a713
      Cédric Le Goater authored
      Commit 23616132, "of/irq: Refactor interrupt-map parsing" changed
      the refcount on the device_node causing an error in of_node_put():
      
      ERROR: Bad of_node_put() on /pci@800000020000000
      CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.13.0-rc3-dirty #2
      Call Trace:
      [c00000003e403500] [c0000000000144fc] .show_stack+0x7c/0x1f0 (unreliable)
      [c00000003e4035d0] [c00000000070f250] .dump_stack+0x88/0xb4
      [c00000003e403650] [c0000000005e8768] .of_node_release+0xd8/0xf0
      [c00000003e4036e0] [c0000000005eeafc] .of_irq_parse_one+0x10c/0x280
      [c00000003e4037a0] [c0000000005efd4c] .of_irq_parse_pci+0x3c/0x1d0
      [c00000003e403840] [c000000000038240] .pcibios_setup_device+0xa0/0x2e0
      [c00000003e403910] [c0000000000398f0] .pcibios_setup_bus_devices+0x60/0xd0
      [c00000003e403990] [c00000000003b3a4] .__of_scan_bus+0x1a4/0x2b0
      [c00000003e403a80] [c00000000003a62c] .pcibios_scan_phb+0x30c/0x410
      [c00000003e403b60] [c0000000009fe430] .pcibios_init+0x7c/0xd4
      
      This patch adjusts the refcount in the walk of the interrupt tree.
      When a match is found, there is no need to increase the refcount
      on 'out_irq->np' as 'newpar' is already holding a ref. The refcount
      balance between 'ipar' and 'newpar' is maintained in the skiplevel:
      goto label.
      
      This patch also removes the usage of the device_node variable 'old'
      which seems useless after the latest changes.
      Signed-off-by: default avatarCédric Le Goater <clg@fr.ibm.com>
      Signed-off-by: default avatarRob Herring <robh@kernel.org>
      2f53a713
    • Geert Uytterhoeven's avatar
      5d927086
    • Rob Herring's avatar
      Revert "of/address: Handle #address-cells > 2 specially" · 13fcca8f
      Rob Herring authored
      This reverts commit e38c0a1f.
      
      Nikita Yushchenko reports:
      While trying to make freescale p2020ds and  mpc8572ds boards working
      with mainline kernel, I faced that commit e38c0a1f (Handle
      
      Both these boards have uli1575 chip.
      Corresponding part in device tree is something like
      
                      uli1575@0 {
                              reg = <0x0 0x0 0x0 0x0 0x0>;
                              #size-cells = <2>;
                              #address-cells = <3>;
                              ranges = <0x2000000 0x0 0x80000000
                                        0x2000000 0x0 0x80000000
                                        0x0 0x20000000
      
                                        0x1000000 0x0 0x0
                                        0x1000000 0x0 0x0
                                        0x0 0x10000>;
                              isa@1e {
      ...
      
      I.e. it has #address-cells = <3>
      
      With commit e38c0a1f reverted, devices under uli1575 are registered
      correctly, e.g. for rtc
      
      OF: ** translation for device /pcie@ffe09000/pcie@0/uli1575@0/isa@1e/rtc@70 **
      OF: bus is isa (na=2, ns=1) on /pcie@ffe09000/pcie@0/uli1575@0/isa@1e
      OF: translating address: 00000001 00000070
      OF: parent bus is default (na=3, ns=2) on /pcie@ffe09000/pcie@0/uli1575@0
      OF: walking ranges...
      OF: ISA map, cp=0, s=1000, da=70
      OF: parent translation for: 01000000 00000000 00000000
      OF: with offset: 70
      OF: one level translation: 00000000 00000000 00000070
      OF: parent bus is pci (na=3, ns=2) on /pcie@ffe09000/pcie@0
      OF: walking ranges...
      OF: default map, cp=a0000000, s=20000000, da=70
      OF: default map, cp=0, s=10000, da=70
      OF: parent translation for: 01000000 00000000 00000000
      OF: with offset: 70
      OF: one level translation: 01000000 00000000 00000070
      OF: parent bus is pci (na=3, ns=2) on /pcie@ffe09000
      OF: walking ranges...
      OF: PCI map, cp=0, s=10000, da=70
      OF: parent translation for: 01000000 00000000 00000000
      OF: with offset: 70
      OF: one level translation: 01000000 00000000 00000070
      OF: parent bus is default (na=2, ns=2) on /
      OF: walking ranges...
      OF: PCI map, cp=0, s=10000, da=70
      OF: parent translation for: 00000000 ffc10000
      OF: with offset: 70
      OF: one level translation: 00000000 ffc10070
      OF: reached root node
      
      With commit e38c0a1f in place, address translation fails:
      
      OF: ** translation for device /pcie@ffe09000/pcie@0/uli1575@0/isa@1e/rtc@70 **
      OF: bus is isa (na=2, ns=1) on /pcie@ffe09000/pcie@0/uli1575@0/isa@1e
      OF: translating address: 00000001 00000070
      OF: parent bus is default (na=3, ns=2) on /pcie@ffe09000/pcie@0/uli1575@0
      OF: walking ranges...
      OF: ISA map, cp=0, s=1000, da=70
      OF: parent translation for: 01000000 00000000 00000000
      OF: with offset: 70
      OF: one level translation: 00000000 00000000 00000070
      OF: parent bus is pci (na=3, ns=2) on /pcie@ffe09000/pcie@0
      OF: walking ranges...
      OF: default map, cp=a0000000, s=20000000, da=70
      OF: default map, cp=0, s=10000, da=70
      OF: not found !
      
      Thierry Reding confirmed this commit was not needed after all:
      "We ended up merging a different address representation for Tegra PCIe
      and I've confirmed that reverting this commit doesn't cause any obvious
      regressions. I think all other drivers in drivers/pci/host ended up
      copying what we did on Tegra, so I wouldn't expect any other breakage
      either."
      
      There doesn't appear to be a simple way to support both behaviours, so
      reverting this as nothing should be depending on the new behaviour.
      
      Cc: stable@vger.kernel.org # v3.7+
      Signed-off-by: default avatarRob Herring <robh@kernel.org>
      13fcca8f
    • Sebastian Ott's avatar
      s390/pci: obtain function handle in hotplug notifier · fcf2f402
      Sebastian Ott authored
      When using the CLP interface to enable or disable a pci device a
      valid function handle needs to be delivered. So far our assumption
      was that we always have an up-to-date version of the function handle
      (since it doesn't change when the device is in use). This assumption
      is incorrect if the pci device is enabled or disabled outside of our
      control. When we are notified about such a change we already receive
      the new function handle. Just use it.
      Reviewed-by: default avatarGerald Schaefer <gerald.schaefer@de.ibm.com>
      Signed-off-by: default avatarSebastian Ott <sebott@linux.vnet.ibm.com>
      Signed-off-by: default avatarMartin Schwidefsky <schwidefsky@de.ibm.com>
      fcf2f402
    • Benjamin Herrenschmidt's avatar
      Merge remote-tracking branch 'agust/merge' into merge · f991db1c
      Benjamin Herrenschmidt authored
      Anatolij writes:
      
      Please pull two DTS fixes for MPC5125 tower board. Without
      them the v3.13-rcX kernels do not boot.
      f991db1c
    • Vince Bridgers's avatar
      stmmac: Fix incorrect spinlock release and PTP cap detection. · 7cd01399
      Vince Bridgers authored
      This patch corrects a problem in stmmac_ptp.c, functions
      stmmac_adjust_time and stmmac_adjust_freq where the incorrect spinlocks
      were released. This patch also addresses a problem in stmmac_main,
      function stmmac_init_ptp where the capability detection for
      advanced timestamping was masked by message masking.
      
      This patch was touch tested using linuxptp, and runs without the previously
      observed instabilities. More extensive testing is ongoing.
      
      Vince
      Signed-off-by: default avatarVince Bridgers <vbridgers2013@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7cd01399
    • Sergei Shtylyov's avatar
      phy: IRQ cannot be shared · 33c133cc
      Sergei Shtylyov authored
      With the way PHY IRQ handler is implemented (all real handling being pushed to
      the workqueue and returning IRQ_HANDLED all the time PHY is active), we cannot
      really claim that PHY IRQ can be shared when calling request_irq().
      Signed-off-by: default avatarSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
      Acked-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      33c133cc
    • Florian Westphal's avatar
      net: rose: restore old recvmsg behavior · f81152e3
      Florian Westphal authored
      recvmsg handler in net/rose/af_rose.c performs size-check ->msg_namelen.
      
      After commit f3d33426
      (net: rework recvmsg handler msg_name and msg_namelen logic), we now
      always take the else branch due to namelen being initialized to 0.
      
      Digging in netdev-vger-cvs git repo shows that msg_namelen was
      initialized with a fixed-size since at least 1995, so the else branch
      was never taken.
      
      Compile tested only.
      Signed-off-by: default avatarFlorian Westphal <fw@strlen.de>
      Acked-by: default avatarHannes Frederic Sowa <hannes@stressinduktion.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f81152e3
    • Paul Durrant's avatar
      xen-netback: fix guest-receive-side array sizes · ac3d5ac2
      Paul Durrant authored
      The sizes chosen for the metadata and grant_copy_op arrays on the guest
      receive size are wrong;
      
      - The meta array is needlessly twice the ring size, when we only ever
        consume a single array element per RX ring slot
      - The grant_copy_op array is way too small. It's sized based on a bogus
        assumption: that at most two copy ops will be used per ring slot. This
        may have been true at some point in the past but it's clear from looking
        at start_new_rx_buffer() that a new ring slot is only consumed if a frag
        would overflow the current slot (plus some other conditions) so the actual
        limit is MAX_SKB_FRAGS grant_copy_ops per ring slot.
      
      This patch fixes those two sizing issues and, because grant_copy_ops grows
      so much, it pulls it out into a separate chunk of vmalloc()ed memory.
      Signed-off-by: default avatarPaul Durrant <paul.durrant@citrix.com>
      Acked-by: default avatarWei Liu <wei.liu2@citrix.com>
      Cc: Ian Campbell <ian.campbell@citrix.com>
      Cc: David Vrabel <david.vrabel@citrix.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ac3d5ac2
    • Fabio Estevam's avatar
      fec: Do not assume that PHY reset is active low · 7a399e3a
      Fabio Estevam authored
      We should not assume that the PHY reset is always active low.
      
      Retrieve this information from the device tree instead, so that the PHY reset
      can work on both cases.
      Reported-by: default avatarPhilipp Zabel <p.zabel@pengutronix.de>
      Signed-off-by: default avatarFabio Estevam <fabio.estevam@freescale.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7a399e3a
    • Ying Xue's avatar
      tipc: fix deadlock during socket release · 84602761
      Ying Xue authored
      A deadlock might occur if name table is withdrawn in socket release
      routine, and while packets are still being received from bearer.
      
             CPU0                       CPU1
      T0:   recv_msg()               release()
      T1:   tipc_recv_msg()          tipc_withdraw()
      T2:   [grab node lock]         [grab port lock]
      T3:   tipc_link_wakeup_ports() tipc_nametbl_withdraw()
      T4:   [grab port lock]*        named_cluster_distribute()
      T5:   wakeupdispatch()         tipc_link_send()
      T6:                            [grab node lock]*
      
      The opposite order of holding port lock and node lock on above two
      different paths may result in a deadlock. If socket lock instead of
      port lock is used to protect port instance in tipc_withdraw(), the
      reverse order of holding port lock and node lock will be eliminated,
      as a result, the deadlock is killed as well.
      Reported-by: default avatarLars Everbrand <lars.everbrand@ericsson.com>
      Reviewed-by: default avatarErik Hugne <erik.hugne@ericsson.com>
      Signed-off-by: default avatarYing Xue <ying.xue@windriver.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      84602761
    • Olof Johansson's avatar
      powerpc: Fix alignment of secondary cpu spin vars · 7d4151b5
      Olof Johansson authored
      Commit 5c0484e2 ('powerpc: Endian safe trampoline') resulted in
      losing proper alignment of the spinlock variables used when booting
      secondary CPUs, causing some quite odd issues with failing to boot on
      PA Semi-based systems.
      
      This showed itself on ppc64_defconfig, but not on pasemi_defconfig,
      so it had gone unnoticed when I initially tested the LE patch set.
      
      Fix is to add explicit alignment instead of relying on good luck. :)
      
      [ It appears that there is a different issue with PA Semi systems
        however this fix is definitely correct so applying anyway -- BenH
      ]
      
      Fixes: 5c0484e2 ('powerpc: Endian safe trampoline')
      Reported-by: default avatarChristian Zigotzky <chzigotzky@xenosoft.de>
      Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=67811Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
      Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      7d4151b5
    • Anton Blanchard's avatar
      powerpc: Align p_end · 286e4f90
      Anton Blanchard authored
      p_end is an 8 byte value embedded in the text section. This means it
      is only 4 byte aligned when it should be 8 byte aligned. Fix this
      by adding an explicit alignment.
      
      This fixes an issue where POWER7 little endian builds with
      CONFIG_RELOCATABLE=y fail to boot.
      Signed-off-by: default avatarAnton Blanchard <anton@samba.org>
      Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      286e4f90
    • Brian W Hart's avatar
      powernv/eeh: Add buffer for P7IOC hub error data · ca1de5de
      Brian W Hart authored
      Prevent ioda_eeh_hub_diag() from clobbering itself when called by supplying
      a per-PHB buffer for P7IOC hub diagnostic data.  Take care to inform OPAL of
      the correct size for the buffer.
      
      [Small style change to the use of sizeof -- BenH]
      Signed-off-by: default avatarBrian W Hart <hartb@linux.vnet.ibm.com>
      Acked-by: default avatarGavin Shan <shangw@linux.vnet.ibm.com>
      Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      ca1de5de