- 17 Dec, 2018 11 commits
-
-
Nikolay Borisov authored
This will be used in future patches that remove the optional extent_io_ops callbacks. Signed-off-by:
Nikolay Borisov <nborisov@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Qu Wenruo authored
Add extra dev extent end check against device boundary. Signed-off-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
-
Qu Wenruo authored
Enhance btrfs_verify_dev_extents() to remember previous checked dev extents, so it can verify no dev extents can overlap. Analysis from Hans: "Imagine allocating a DATA|DUP chunk. In the chunk allocator, we first set... max_stripe_size = SZ_1G; max_chunk_size = BTRFS_MAX_DATA_CHUNK_SIZE ... which is 10GiB. Then... /* we don't want a chunk larger than 10% of writeable space */ max_chunk_size = min(div_factor(fs_devices->total_rw_bytes, 1), max_chunk_size); Imagine we only have one 7880MiB block device in this filesystem. Now max_chunk_size is down to 788MiB. The next step in the code is to search for max_stripe_size * dev_stripes amount of free space on the device, which is in our example 1GiB * 2 = 2GiB. Imagine the device has exactly 1578MiB free in one contiguous piece. This amount of bytes will be put in devices_info[ndevs - 1].max_avail Next we recalculate the stripe_size (which is actually the device extent length), based on the actual maximum amount of available raw disk space: stripe_size = div_u64(devices_info[ndevs - 1].max_avail, dev_stripes); stripe_size is now 789MiB Next we do... data_stripes = num_stripes / ncopies ...where data_stripes ends up as 1, because num_stripes is 2 (the amount of device extents we're going to have), and DUP has ncopies 2. Next there's a check... if (stripe_size * data_stripes > max_chunk_size) ...which matches because 789MiB * 1 > 788MiB. We go into the if code, and next is... stripe_size = div_u64(max_chunk_size, data_stripes); ...which resets stripe_size to max_chunk_size: 788MiB Next is a fun one... /* bump the answer up to a 16MB boundary */ stripe_size = round_up(stripe_size, SZ_16M); ...which changes stripe_size from 788MiB to 800MiB. We're not done changing stripe_size yet... /* But don't go higher than the limits we found while searching * for free extents */ stripe_size = min(devices_info[ndevs - 1].max_avail, stripe_size); This is bad. max_avail is twice the stripe_size (we need to fit 2 device extents on the same device for DUP). The result here is that 800MiB < 1578MiB, so it's unchanged. However, the resulting DUP chunk will need 1600MiB disk space, which isn't there, and the second dev_extent might extend into the next thing (next dev_extent? end of device?) for 22MiB. The last shown line of code relies on a situation where there's twice the value of stripe_size present as value for the variable stripe_size when it's DUP. This was actually the case before commit 92e222df "btrfs: alloc_chunk: fix DUP stripe size handling", from which I quote: "[...] in the meantime there's a check to see if the stripe_size does not exceed max_chunk_size. Since during this check stripe_size is twice the amount as intended, the check will reduce the stripe_size to max_chunk_size if the actual correct to be used stripe_size is more than half the amount of max_chunk_size." In the previous version of the code, the 16MiB alignment (why is this done, by the way?) would result in a 50% chance that it would actually do an 8MiB alignment for the individual dev_extents, since it was operating on double the size. Does this matter? Does it matter that stripe_size can be set to anything which is not 16MiB aligned because of the amount of remaining available disk space which is just taken? What is the main purpose of this round_up? The most straightforward thing to do seems something like... stripe_size = min( div_u64(devices_info[ndevs - 1].max_avail, dev_stripes), stripe_size ) ..just putting half of the max_avail into stripe_size." Link: https://lore.kernel.org/linux-btrfs/b3461a38-e5f8-f41d-c67c-2efac8129054@mendix.com/Reported-by:Hans van Kranenburg <hans.van.kranenburg@mendix.com> Signed-off-by:
-
Qu Wenruo authored
We have a complex loop design for find_free_extent(), that has different behavior for each loop, some even includes new chunk allocation. Instead of putting such a long code into find_free_extent() and makes it harder to read, just extract them into find_free_extent_update_loop(). With all the cleanups, the main find_free_extent() should be pretty barebone: find_free_extent() |- Iterate through all block groups | |- Get a valid block group | |- Try to do clustered allocation in that block group | |- Try to do unclustered allocation in that block group | |- Check if the result is valid | | |- If valid, then exit | |- Jump to next block group | |- Push harder to find free extents |- If not found, re-iterate all block groups Signed-off-by:
Su Yue <suy.fnst@cn.fujitsu.com> [ copy callchain from changelog to function comment ] Signed-off-by:
-
Qu Wenruo authored
This patch will extract unclsutered extent allocation code into find_free_extent_unclustered(). And this helper function will use return value to indicate what to do next. This should make find_free_extent() a little easier to read. Signed-off-by:
Josef Bacik <josef@toxicpanda.com> [Update merge conflict with fb5c39d7 ("btrfs: don't use ctl->free_space for max_extent_size")] Reviewed-by:
-
Qu Wenruo authored
We have two main methods to find free extents inside a block group: 1) clustered allocation 2) unclustered allocation This patch will extract the clustered allocation into find_free_extent_clustered() to make it a little easier to read. Instead of jumping between different labels in find_free_extent(), the helper function will use return value to indicate different behavior. Signed-off-by:
-
Qu Wenruo authored
Instead of tons of different local variables in find_free_extent(), extract them into find_free_extent_ctl structure, and add better explanation for them. Some modification may looks redundant, but will later greatly simplify function parameter list during find_free_extent() refactor. Also add two comments to co-operate with fb5c39d7 ("btrfs: don't use ctl->free_space for max_extent_size"), to make ffe_ctl->max_extent_size update more reader-friendly. Signed-off-by:
-
Lu Fengqi authored
Introduce a new wrapper update_bytes_pinned to replace open coded bytes_pinned modifiers. Now the underflows of space_info::bytes_pinned get detected and reported. Reviewed-by:
Lu Fengqi <lufq.fnst@cn.fujitsu.com> Signed-off-by:
-
Qu Wenruo authored
Although we have space_info::bytes_may_use underflow detection in btrfs_free_reserved_data_space_noquota(), we have more callers who are subtracting number from space_info::bytes_may_use. So instead of doing underflow detection for every caller, introduce a new wrapper update_bytes_may_use() to replace open coded bytes_may_use modifiers. This also introduce a macro to declare more wrappers, but currently space_info::bytes_may_use is the mostly interesting one. Reviewed-by:
-
Filipe Manana authored
Tracking pending ordered extents per transaction was introduced in commit 50d9aa99 ("Btrfs: make sure logged extents complete in the current transaction V3") and later updated in commit 161c3549 ("Btrfs: change how we wait for pending ordered extents"). However now that on fsync we always wait for ordered extents to complete before logging, done in commit 5636cf7d ("btrfs: remove the logged extents infrastructure"), we no longer need the stuff to track for pending ordered extents, which was not completely removed in the mentioned commit. So remove the remaining of the pending ordered extents infrastructure. Reviewed-by:
Liu Bo <bo.liu@linux.alibaba.com> Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
-
Filipe Manana authored
The logged_start and logged_end variables, at btrfs_log_changed_extents, were added in commit 8c6c5928 ("btrfs: log csums for all modified extents"). However since the recent simplification for fsync, which makes us wait for all ordered extents to complete before logging extents, we no longer need those variables. Commit a2120a47 ("btrfs: clean up the left over logged_list usage") forgot to remove them. Reviewed-by:
-
- 16 Dec, 2018 1 commit
-
-
Linus Torvalds authored
-
- 14 Dec, 2018 20 commits
-
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "11 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: scripts/spdxcheck.py: always open files in binary mode checkstack.pl: fix for aarch64 userfaultfd: check VM_MAYWRITE was set after verifying the uffd is registered fs/iomap.c: get/put the page in iomap_page_create/release() hugetlbfs: call VM_BUG_ON_PAGE earlier in free_huge_page() memblock: annotate memblock_is_reserved() with __init_memblock psi: fix reference to kernel commandline enable arch/sh/include/asm/io.h: provide prototypes for PCI I/O mapping in asm/io.h mm/sparse: add common helper to mark all memblocks present mm: introduce common STRUCT_PAGE_MAX_SHIFT define alpha: fix hang caused by the bootmem removal
-
Thierry Reding authored
The spdxcheck script currently falls over when confronted with a binary file (such as Documentation/logo.gif). To avoid that, always open files in binary mode and decode line-by-line, ignoring encoding errors. One tricky case is when piping data into the script and reading it from standard input. By default, standard input will be opened in text mode, so we need to reopen it in binary mode. The breakage only happens with python3 and results in a UnicodeDecodeError (according to Uwe). Link: http://lkml.kernel.org/r/20181212131210.28024-1-thierry.reding@gmail.com Fixes: 6f4d29df ("scripts/spdxcheck.py: make python3 compliant") Signed-off-by:
Thierry Reding <treding@nvidia.com> Reviewed-by:
Jeremy Cline <jcline@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Joe Perches <joe@perches.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Qian Cai authored
There is actually a space after "sp," like this, ffff2000080813c8: a9bb7bfd stp x29, x30, [sp, #-80]! Right now, checkstack.pl isn't able to print anything on aarch64, because it won't be able to match the stating objdump line of a function due to this missing space. Hence, it displays every stack as zero-size. After this patch, checkpatch.pl is able to match the start of a function's objdump, and is then able to calculate each function's stack correctly. Link: http://lkml.kernel.org/r/20181207195843.38528-1-cai@lca.pwSigned-off-by:Qian Cai <cai@lca.pw> Signed-off-by:
-
Andrea Arcangeli authored
Calling UFFDIO_UNREGISTER on virtual ranges not yet registered in uffd could trigger an harmless false positive WARN_ON. Check the vma is already registered before checking VM_MAYWRITE to shut off the false positive warning. Link: http://lkml.kernel.org/r/20181206212028.18726-2-aarcange@redhat.com Cc: <stable@vger.kernel.org> Fixes: 29ec9066 ("userfaultfd: shmem/hugetlbfs: only allow to register VM_MAYWRITE vmas") Signed-off-by:
Andrea Arcangeli <aarcange@redhat.com> Reported-by: syzbot+06c7092e7d71218a2c16@syzkaller.appspotmail.com Acked-by:
Mike Rapoport <rppt@linux.ibm.com> Acked-by:
Hugh Dickins <hughd@google.com> Acked-by:
Peter Xu <peterx@redhat.com> Signed-off-by:
-
Piotr Jaroszynski authored
migrate_page_move_mapping() expects pages with private data set to have a page_count elevated by 1. This is what used to happen for xfs through the buffer_heads code before the switch to iomap in commit 82cb1417 ("xfs: add support for sub-pagesize writeback without buffer_heads"). Not having the count elevated causes move_pages() to fail on memory mapped files coming from xfs. Make iomap compatible with the migrate_page_move_mapping() assumption by elevating the page count as part of iomap_page_create() and lowering it in iomap_page_release(). It causes the move_pages() syscall to misbehave on memory mapped files from xfs. It does not not move any pages, which I suppose is "just" a perf issue, but it also ends up returning a positive number which is out of spec for the syscall. Talking to Michal Hocko, it sounds like returning positive numbers might be a necessary update to move_pages() anyway though (https://lkml.kernel.org/r/20181116114955.GJ14706@dhcp22.suse.cz). I only hit this in tests that verify that move_pages() actually moved the pages. The test also got confused by the positive return from move_pages() (it got treated as a success as positive numbers were not expected and not handled) making it a bit harder to track down what's going on. Link: http://lkml.kernel.org/r/20181115184140.1388751-1-pjaroszynski@nvidia.com Fixes: 82cb1417 ("xfs: add support for sub-pagesize writeback without buffer_heads") Signed-off-by:
Piotr Jaroszynski <pjaroszynski@nvidia.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Cc: William Kucharski <william.kucharski@oracle.com> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: Brian Foster <bfoster@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Yongkai Wu authored
A stack trace was triggered by VM_BUG_ON_PAGE(page_mapcount(page), page) in free_huge_page(). Unfortunately, the page->mapping field was set to NULL before this test. This made it more difficult to determine the root cause of the problem. Move the VM_BUG_ON_PAGE tests earlier in the function so that if they do trigger more information is present in the page struct. Link: http://lkml.kernel.org/r/1543491843-23438-1-git-send-email-nic_w@163.comSigned-off-by:
Yongkai Wu <nic_w@163.com> Acked-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by:
William Kucharski <william.kucharski@oracle.com> Signed-off-by:
-
Yueyi Li authored
Found warning: WARNING: EXPORT symbol "gsi_write_channel_scratch" [vmlinux] version generation failed, symbol will not be versioned. WARNING: vmlinux.o(.text+0x1e0a0): Section mismatch in reference from the function valid_phys_addr_range() to the function .init.text:memblock_is_reserved() The function valid_phys_addr_range() references the function __init memblock_is_reserved(). This is often because valid_phys_addr_range lacks a __init annotation or the annotation of memblock_is_reserved is wrong. Use __init_memblock instead of __init. Link: http://lkml.kernel.org/r/BLUPR13MB02893411BF12EACB61888E80DFAE0@BLUPR13MB0289.namprd13.prod.outlook.comSigned-off-by:
Yueyi Li <liyueyi@live.com> Acked-by:
David Hildenbrand <david@redhat.com> Acked-by:
-
Baruch Siach authored
The kernel commandline parameter named in CONFIG_PSI_DEFAULT_DISABLED help text contradicts the documentation in kernel-parameters.txt, and the code. Fix that. Link: http://lkml.kernel.org/r/20181203213416.GA12627@cmpxchg.org Fixes: e0c27447 ("psi: make disabling/enabling easier for vendor kernels") Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
-
Mark Brown authored
Most architectures provide prototypes for the PCI I/O mapping operations when asm/io.h is included but SH doesn't currently do that, leading to for example warnings in sound/pci/hda/patch_ca0132.c when pci_iomap() is used on current -next. Make SH more consistent with other architectures by including asm-generic/pci_iomap.h in asm/io.h. Link: http://lkml.kernel.org/r/20181106175142.27988-1-broonie@kernel.orgSigned-off-by:
Mark Brown <broonie@kernel.org> Reported-by:
kbuild test robot <lkp@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Logan Gunthorpe authored
Presently the arches arm64, arm and sh have a function which loops through each memblock and calls memory present. riscv will require a similar function. Introduce a common memblocks_present() function that can be used by all the arches. Subsequent patches will cleanup the arches that make use of this. Link: http://lkml.kernel.org/r/20181107205433.3875-3-logang@deltatee.comSigned-off-by:
Logan Gunthorpe <logang@deltatee.com> Acked-by:
-
Logan Gunthorpe authored
This define is used by arm64 to calculate the size of the vmemmap region. It is defined as the log2 of the upper bound on the size of a struct page. We move it into mm_types.h so it can be defined properly instead of set and checked with a build bug. This also allows us to use the same define for riscv. Link: http://lkml.kernel.org/r/20181107205433.3875-2-logang@deltatee.comSigned-off-by:
Will Deacon <will.deacon@arm.com> Acked-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Mike Rapoport authored
The conversion of alpha to memblock as the early memory manager caused boot to hang as described at [1]. The issue is caused because for CONFIG_DISCTONTIGMEM=y case, memblock_add() is called using memory start PFN that had been rounded down to the nearest 8Mb and it caused memblock to see more memory that is actually present in the system. Besides, memblock allocates memory from high addresses while bootmem was using low memory, which broke the assumption that early allocations are always accessible by the hardware. This patch ensures that memblock_add() is using the correct PFN for the memory start and forces memblock to use bottom-up allocations. [1] https://lkml.org/lkml/2018/11/22/1032 Link: http://lkml.kernel.org/r/1543233216-25833-1-git-send-email-rppt@linux.ibm.comReported-by:
Meelis Roos <mroos@linux.ee> Signed-off-by:
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "Three small fixes for this week. contains: - spectre indexing fix for aio (Jeff) - fix for the previous zeroing bio fix, we don't need it for user mapped pages, and in fact it breaks some applications if we do (Keith) - allocation failure fix for null_blk with zoned (Shin'ichiro)" * tag 'for-linus-20181214' of git://git.kernel.dk/linux-block: block: Fix null_blk_zoned creation failure with small number of zones aio: fix spectre gadget in lookup_ioctx block/bio: Do not zero user pages -
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fix from Stephen Boyd: "One fix for the qcom QCS404 clk driver that was merged for this release. It specified the wrong parent for a PLL so a part of the clk tree wasn't rooted correctly. This fixes it by using the right name" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: qcom: qcs404: Fix gpll0_out_main parent
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fix from Catalin Marinas: "Invalidate the caches before clearing the DMA buffer via the non-cacheable alias in the FORCE_CONTIGUOUS case" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: dma-mapping: Fix FORCE_CONTIGUOUS buffer clearing
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: "One notable fix for our change to split pt_regs between user/kernel, we forgot to update BPF to use the user-visible type which was an ABI break for BPF programs. A slightly ugly but minimal fix to do_syscall_trace_enter() so that we use tracehook_report_syscall_entry() properly. We'll rework the code in next to avoid the empty if body. Seven commits fixing bugs in the new papr_scm (Storage Class Memory) driver. The driver was finally able to be tested on the other hypervisor which exposed several bugs. The fixes are all fairly minimal at least. Fix a crash in our MSI code if an MSI-capable device is plugged into a non-MSI capable PHB, only seen on older hardware (MPC8378). Fix our legacy serial code to look for "stdout-path" since the device trees were updated to use that instead of "linux,stdout-path". A change to the COFF zImage code to fix booting old powermacs. A couple of minor build fixes. Thanks to: Benjamin Herrenschmidt, Daniel Axtens, Dmitry V. Levin, Elvira Khabirova, Oliver O'Halloran, Paul Mackerras, Radu Rendec, Rob Herring, Sandipan Das" * tag 'powerpc-4.20-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/ptrace: replace ptrace_report_syscall() with a tracehook call powerpc/mm: Fallback to RAM if the altmap is unusable powerpc/papr_scm: Use ibm,unit-guid as the iset cookie powerpc/papr_scm: Fix DIMM device registration race powerpc/papr_scm: Remove endian conversions powerpc/papr_scm: Update DT properties powerpc/papr_scm: Fix resource end address powerpc/papr_scm: Use depend instead of select powerpc/bpf: Fix broken uapi for BPF_PROG_TYPE_PERF_EVENT powerpc/boot: Fix build failures with -j 1 powerpc: Look for "stdout-path" when setting up legacy consoles powerpc/msi: Fix NULL pointer access in teardown code powerpc/mm: Fix linux page tables build with some configs powerpc: Fix COFF zImage booting on old powermacs
-
https://github.com/ceph/ceph-clientLinus Torvalds authored
Pull ceph fix from Ilya Dryomov: "Luis discovered a problem with the new copyfrom offload on the server side. Disable it for now" * tag 'ceph-for-4.20-rc7' of https://github.com/ceph/ceph-client: ceph: make 'nocopyfrom' a default mount option
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pin control fixes from Linus Walleij: "Three pin control fixes for the v4.20 series. Just odd drivers, so nothing particularly interesting: - Set the tile property on Qualcomm SDM60. - Fix up enable register calculation for the Meson - Fix an IRQ offset on the Sunxi (Allwinner)" * tag 'pinctrl-v4.20-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: sunxi: a83t: Fix IRQ offset typo for PH11 pinctrl: meson: fix pull enable register calculation pinctrl: sdm660: Set tile property for pingroups
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "While I hoped things would calm down, the world hasn't joined with me, but it's a few things scattered over a wide area. The i915 workarounds regression fix is probably the largest, the rest are more usual sized. We also get some new AMD PCI IDs. There is also a patch in here to MAINTAINERS to added Daniel as an official DRM toplevel co-maintainer, he's decided he wants to step up and share the glory, and he'll likely process next weeks fixes while I'm away on holidays. Summary: amdgpu: - some new PCI IDs - fixed firmware image updates - power management fixes - locking warning fix nouveau: - framebuffer flushing fix - memory leak fix - tegra device init regression fix vmwgfx: - OOM kernel memory fix - excess return in function fix i915: - the biggest fix is a regression fix where workarounds weren't getting reapplied after a gpu hang causing further crashing, this fixes the workaround application to make it happen again - GPU hang fixes for Braswell and some GEN3 GPUs - GVT fix for broadwell tiling rockchip: - revert to fix a regression causing a WARN on shutdown mediatek: - avoid crash attaching to non-existant bridges" * tag 'drm-fixes-2018-12-14' of git://anongit.freedesktop.org/drm/drm: (23 commits) drm/vmwgfx: Protect from excessive execbuf kernel memory allocations v3 MAINTAINERS: Daniel for drm co-maintainer drm/amdgpu: drop fclk/gfxclk ratio setting drm/vmwgfx: remove redundant return ret statement drm/i915: Flush GPU relocs harder for gen3 drm/i915: Allocate a common scratch page drm/i915/execlists: Apply a full mb before execution for Braswell drm/nouveau/kms: Fix memory leak in nv50_mstm_del() drm/nouveau/kms/nv50-: also flush fb writes when rewinding push buffer drm/amdgpu: Fix DEBUG_LOCKS_WARN_ON(depth <= 0) in amdgpu_ctx.lock Revert "drm/rockchip: Allow driver to be shutdown on reboot/kexec" drm/nouveau/drm/nouveau: tegra: Call nouveau_drm_device_init() drm/amdgpu/powerplay: Apply avfs cks-off voltages on VI drm/amdgpu: update SMC firmware image for polaris10 variants drm/amdkfd: add new vega20 pci id drm/amdkfd: add new vega10 pci ids drm/amdgpu: add some additional vega20 pci ids drm/amdgpu: add some additional vega10 pci ids drm/amdgpu: update smu firmware images for VI variants (v2) drm/i915: Introduce per-engine workarounds ... -
git://git.infradead.org/users/willy/linux-daxLinus Torvalds authored
Pull XArray fixes from Matthew Wilcox: "Two bugfixes, each with test-suite updates, two improvements to the test-suite without associated bugs, and one patch adding a missing API" * tag 'xarray-4.20-rc7' of git://git.infradead.org/users/willy/linux-dax: XArray: Fix xa_alloc when id exceeds max XArray tests: Check iterating over multiorder entries XArray tests: Handle larger indices more elegantly XArray: Add xa_cmpxchg_irq and xa_cmpxchg_bh radix tree: Don't return retry entries from lookup
-
- 13 Dec, 2018 8 commits
-
-
Linus Torvalds authored
Merge tag 'linux-kselftest-4.20-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fix from Shuah Khan: "A single fix for a seccomp test from Kees Cook." * tag 'linux-kselftest-4.20-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/seccomp: Remove SIGSTOP si_pid check
-
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermalLinus Torvalds authored
Pull thermal fixes from Eduardo Valentin: "Fixes for STM and HISI thermal drivers" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: thermal: stm32: Fix stm_thermal_read_factory_settings thermal: stm32: read factory settings inside stm_thermal_prepare thermal/drivers/hisi: Fix number of sensors on hi3660 thermal/drivers/hisi: Fix wrong platform_get_irq_byname()
-
git://people.freedesktop.org/~thomash/linuxDave Airlie authored
One regression fix for avoiding kernel OOM, one cleanup return fix. Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Thomas Hellstrom <thellstrom@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181213122815.10581-1-thellstrom@vmware.com
-
Matthew Wilcox authored
Specifying a starting ID greater than the maximum ID isn't something attempted very often, but it should fail. It was succeeding due to xas_find_marked() returning the wrong error state, so add tests for both xa_alloc() and xas_find_marked(). Fixes: b803b428 ("xarray: Add XArray iterators") Signed-off-by:
Matthew Wilcox <willy@infradead.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull rdma fixes from Doug Ledford: "We have 5 small fixes for this pull request. One is a performance regression, so not necessarily strictly a fix, but it was small and reasonable and claimed to avoid thrashing in the scheduler, so I took it. The remaining are all legitimate fixes that match the "we take fixes any time" criteria. Summary: - One performance regression for hfi1 - One kasan fix for hfi1 - A couple mlx5 fixes - A core oops fix" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: IB/core: Fix oops in netdev_next_upper_dev_rcu() IB/mlx5: Block DEVX umem from the non applicable cases IB/mlx5: Fix implicit ODP interrupted page fault IB/hfi1: Fix an out-of-bounds access in get_hw_stats IB/hfi1: Fix a latency issue for small messages
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull mmc fixes from Ulf Hansson: "MMC core: - Fixup RPMB requests to use mrq->sbc when sending CMD23 MMC host: - omap: Fix broken MMC/SD on OMAP15XX/OMAP5910/OMAP310 - sdhci-omap: Fix DCRC error handling during tuning - sdhci: Fixup the timeout check window for clock and reset" * tag 'mmc-v4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci: fix the timeout check window for clock and reset mmc: sdhci-omap: Fix DCRC error handling during tuning MMC: OMAP: fix broken MMC on OMAP15XX/OMAP5910/OMAP310 mmc: core: use mrq->sbc when sending CMD23 for RPMB
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "Only usual suspects here: a few more fixups for Realtek HD-audio on various PCs, including a regression fix in the previous fix for Lenovo X1 Carbon, as well as a typo fix in the recent Fireface patch" * tag 'sound-4.20-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek: Enable audio jacks of ASUS UX433FN/UX333FA with ALC294 ALSA: hda/realtek: Enable audio jacks of ASUS UX533FD with ALC294 ALSA: hda/realtek: ALC294 mic and headset-mode fixups for ASUS X542UN ALSA: fireface: fix reference to wrong register for clock configuration ALSA: hda/realtek - Fix the mute LED regresion on Lenovo X1 Carbon ALSA: hda/realtek - Fixed headphone issue for ALC700
-
Thomas Hellstrom authored
With the new validation code, a malicious user-space app could potentially submit command streams with enough buffer-object and resource references in them to have the resulting allocated validion nodes and relocations make the kernel run out of GFP_KERNEL memory. Protect from this by having the validation code reserve TTM graphics memory when allocating. Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by:
Deepak Rawat <drawat@vmware.com> --- v2: Removed leftover debug printouts
-
