- 20 Aug, 2017 40 commits
-
-
Sakari Ailus authored
The et8ek8 driver combines I²C register writes to a single array that it passes to i2c_transfer(). The maximum number of writes is 48 at once, decrease it to 8 and make more transfers if needed. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Julia Lawall authored
The v4l2_subdev_ops structure is only passed as the third argument of v4l2_i2c_subdev_init, which is const, so the v4l2_subdev_ops structure can be const as well. The other structures are only stored in the v4l2_subdev_ops structure, all the fields of which are const, so these structures can also be const. Done with the help of Coccinelle. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Julia Lawall authored
The v4l2_subdev_ops structure is only passed as the third argument of v4l2_i2c_subdev_init, which is const, so the v4l2_subdev_ops structure can be const as well. The other structures are only stored in the v4l2_subdev_ops structure, all the fields of which are const, so these structures can also be const. Done with the help of Coccinelle. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Chiranjeevi Rapolu authored
Previously, pixel-rate/(pixels-per-line * lines-per-frame) was yielding incorrect frame timing for the user. OV sensor is using internal timing and this requires conversion (internal timing -> PPL) for correct HBLANK calculation. Now, change pixels-per-line domain from internal sensor clock to pixels domain. Set HBLANK read-only because fixed PPL is used for all resolutions. And, use more accurate link-frequency 422.4MHz instead of rounding down to 420MHz. Signed-off-by:
Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com> Reviewed-by:
Tomasz Figa <tfiga@chromium.org> Signed-off-by:
-
Arvind Yadav authored
serio_device_id are not supposed to change at runtime. All functions working with serio_device_id provided by <linux/serio.h> work with const serio_device_id. So mark the non-const structs as const. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Arvind Yadav authored
serio_device_id are not supposed to change at runtime. All functions working with serio_device_id provided by <linux/serio.h> work with const serio_device_id. So mark the non-const structs as const. Signed-off-by:
-
Fabio Estevam authored
platform_get_resource() may fail and in this case a NULL dereference will occur. Prevent this from happening by returning an error on platform_get_resource() failure. Fixes: b0444f18 ("[media] coda: add i.MX6 VDOA driver") Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
-
Bhumika Goyal authored
The first argument of function snd_ctl_new1 is of type const struct snd_kcontrol_new * but in this file the variable is passed by value to this function. This generated ""incompatible type for argument" error. So, pass the variable by reference. Signed-off-by:
Bhumika Goyal <bhumirks@gmail.com> Signed-off-by:
-
Bhumika Goyal authored
The first argument of function snd_ctl_new1 is of type const struct snd_kcontrol_new * but in this file the variable is passed by value to this function. This generated ""incompatible type for argument" error. So, pass the variable by reference. Signed-off-by:
-
Bhumika Goyal authored
Make this const as it is only used during a copy operation. Done using Coccinelle. Signed-off-by:
-
Bhumika Goyal authored
Make this const as it only passed as the 1st argument to the function snd_ctl_new1, which is of type const. Done using Coccinelle. Signed-off-by:
-
Arvind Yadav authored
pnp_device_id are not supposed to change at runtime. All functions working with pnp_device_id provided by <linux/pnp.h> work with const pnp_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
platform_device_id are not supposed to change at runtime. All functions working with platform_device_id provided by <linux/platform_device.h> work with const platform_device_id. So mark the non-const structs as const. Signed-off-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Arvind Yadav authored
platform_device_id are not supposed to change at runtime. All functions working with platform_device_id provided by <linux/platform_device.h> work with const platform_device_id. So mark the non-const structs as const. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Bhumika Goyal authored
Make these const as they are only used during a copy operation. Done using Coccinelle. Signed-off-by:
-
Pan Bian authored
Function of_clk_get() returns an ERR_PTR on failures. In file mtk_mdp_commp.c, its return value is checked against NULL. Such checks cannot prevent from accessing bad memory. This patch replaces the NULL checks with IS_ERR checks. Signed-off-by:
Pan Bian <bianpan2016@163.com> Signed-off-by:
-
Rob Herring authored
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by:
Rob Herring <robh@kernel.org> Acked-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by:
Matthias Brugger <matthias.bgg@gmail.com> Acked-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Sakari Ailus authored
struct v4l2_subdev.host_priv is intended to be used by another driver. This is hardly good design but back in the days of platform data was a quick hack to get things done. As the sub-device specific bus information can be stored to the ISP driver specific struct allocated along with v4l2_async_subdev, keep the information there and only there. Signed-off-by:
-
Sakari Ailus authored
The CSI PHY is associated with a CSI receiver. The code assumes this receiver is a CSI2 module and relies on the CSI2 module object heavily to access the ISP or pipeline objects. However, the receiver could also be a CSI1/CCP2 module. Pass a new CSI receiver entity pointer to the CSI PHY acquire function, and replace all hardcoded usage of the CSI2 module with that CSI receiver entity. Signed-off-by:
-
Sakari Ailus authored
The PHY is still relevant for CCP2. Signed-off-by:
-
Pavel Machek authored
ISP CSI1 module needs all the bits correctly set to work. Signed-off-by:
Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Signed-off-by:
-
Pavel Machek authored
Add support for parsing CSI1 configuration. Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.co.uk> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> # on Beagleboard-xM + MPT9P031 Signed-off-by:
-
Hans Verkuil authored
The free_irq() function could be called from interrupt context, which is invalid. Move this to the thread. In the interrupt handler we just request that the thread disables the irq. This is done through an atomic so we don't need to add any spinlocks. Signed-off-by:
-
Hans Verkuil authored
The CEC_EVENT_PIN_LOW/HIGH defines and the cec_queue_pin_event() function did not specify that these were about CEC pin events. Since in the future there will also be HPD pin events it is wise to rename the event defines and function to CEC_EVENT_PIN_CEC_LOW/HIGH and cec_queue_pin_cec_event() now before these become part of the ABI. Signed-off-by:
-
Hans Verkuil authored
Use the new CEC_CAP_DEFAULTS define in the s5p-cec driver. Signed-off-by:
-
Hans Verkuil authored
The v4l2_input32 struct wasn't updated when this field was added. It didn't cause a failure in the compat code, but it is better to keep it in sync with v4l2_input to avoid confusion. Signed-off-by:
-
Mauro Carvalho Chehab authored
The arguments for this function are pointers. Make it clear at its documentation. Signed-off-by:
-
Julia Lawall authored
uvc_subdev_ops is only passed as the second argument of v4l2_subdev_init, which is const, so uvc_subdev_ops can be const as well. Done with the help of Coccinelle. Signed-off-by:
-
Guennadi Liakhovetski authored
When adding support for metadata nodes, we'll have to keep video devices registered until all metadata nodes are closed too. Since this has nothing to do with stream counting, replace the nstreams atomic variable with a reference counter. Signed-off-by:
Guennadi Liakhovetski <guennadi.liakhovetski@intel.com> Reviewed-by:
-
Guennadi Liakhovetski authored
According to documentation of struct vb2_ops the .queue_setup() callback should return an error if the number of planes parameter contains an invalid value on input. Fix this instead of ignoring the value. Signed-off-by:
-
Guenter Roeck authored
The size of uvc_control_mapping is user controlled leading to a potential heap overflow in the uvc driver. This adds a check to verify the user provided size fits within the bounds of the defined buffer size. Originally-from: Richard Simmons <rssimmo@amazon.com> Cc: stable@vger.kernel.org Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Reviewed-by:
-
Jim Lin authored
Section 9.2.6.4 of USB 2.0/3.x specification describes that "device must be able to return the first data packet to host within 500 ms of receipt of the request. For subsequent data packet, if any, the device must be able to return them within 500 ms". This is to fix incorrect timeout and change it from 300 ms to 500 ms to meet the timing specified by specification for Get Request. Signed-off-by:
Jim Lin <jilin@nvidia.com> Reviewed-by:
-
Julia Lawall authored
These videobuf_queue_ops structures are only passed as the second argument to videobuf_queue_vmalloc_init, which is declared as const. Thus the videobuf_queue_ops structures themselves can be const. Done with the help of Coccinelle. // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct videobuf_queue_ops i@p = { ... }; @ok1@ identifier r.i; expression e1; position p; @@ videobuf_queue_vmalloc_init(e1,&i@p,...) @bad@ position p != {r.p,ok1.p}; identifier r.i; struct videobuf_queue_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct videobuf_queue_ops i = { ... }; // </smpl> Signed-off-by: -
Julia Lawall authored
These videobuf_queue_ops structures are only passed as the second argument to videobuf_queue_vmalloc_init, which is declared as const. Thus the videobuf_queue_ops structures themselves can be const. Done with the help of Coccinelle. // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct videobuf_queue_ops i@p = { ... }; @ok1@ identifier r.i; expression e1; position p; @@ videobuf_queue_vmalloc_init(e1,&i@p,...) @bad@ position p != {r.p,ok1.p}; identifier r.i; struct videobuf_queue_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct videobuf_queue_ops i = { ... }; // </smpl> Signed-off-by: -
Julia Lawall authored
These videobuf_queue_ops structures are only passed as the second argument to videobuf_queue_vmalloc_init, which is declared as const. Thus the videobuf_queue_ops structures themselves can be const. Done with the help of Coccinelle. // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct videobuf_queue_ops i@p = { ... }; @ok1@ identifier r.i; expression e1; position p; @@ videobuf_queue_vmalloc_init(e1,&i@p,...) @bad@ position p != {r.p,ok1.p}; identifier r.i; struct videobuf_queue_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct videobuf_queue_ops i = { ... }; // </smpl> In the first case, there is a second commented call to videobuf_queue_sg_init with the structure as the second argument. If that code will be uncommented, the const will remain correct, because the second parameter of that function is also const. Signed-off-by: -
Julia Lawall authored
These videobuf_queue_ops structures are only passed as the second argument to videobuf_queue_vmalloc_init, which is declared as const. Thus the videobuf_queue_ops structures themselves can be const. Done with the help of Coccinelle. // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct videobuf_queue_ops i@p = { ... }; @ok1@ identifier r.i; expression e1; position p; @@ videobuf_queue_vmalloc_init(e1,&i@p,...) @bad@ position p != {r.p,ok1.p}; identifier r.i; struct videobuf_queue_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct videobuf_queue_ops i = { ... }; // </smpl> Signed-off-by: -
Julia Lawall authored
This v4l2_clk_ops structure is only passed as the first argument of v4l2_clk_register, which is const, so the v4l2_clk_ops structure can also be const. Done with the help of Coccinelle. Signed-off-by:
-
Julia Lawall authored
This v4l2_audio structure is only copied into other structures, so it can be const. Done with the help of Coccinelle. Signed-off-by:
-
Bhumika Goyal authored
Make these const as they are only used during a copy operation. Done using Coccinelle. Signed-off-by:
-
Bhumika Goyal authored
Make these const as they are only used during a copy operation. Done using Coccinelle. Signed-off-by:
-
