1. 23 Jun, 2015 40 commits
    • Suman Tripathi's avatar
      drivers: net: xgene: Fix the ACPI support for RGMII/SGMII0/XFI interface of... · 0738c54d
      Suman Tripathi authored
      drivers: net: xgene: Fix the ACPI support for RGMII/SGMII0/XFI interface of APM X-Gene SoC ethernet controller.
      
      This patch implements couple of fixes to support ACPI for RGMII/SGMII0/XFI
      interface of APM X-Gene SoC ethernet controller driver. This patch uses
      the _SUN acpi object to fetch the port-id information whereas the FDT uses
      port-id binding for port-id information.
      Signed-off-by: default avatarIyappan Subramanian <isubramanian@apm.com>
      Signed-off-by: default avatarSuman Tripathi <stripathi@apm.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0738c54d
    • Noam Camus's avatar
      NET: Add ezchip ethernet driver · 0dd07709
      Noam Camus authored
      Simple LAN device for debug or management purposes.
      Device supports interrupts for RX and TX(completion).
      Device does not have DMA ability.
      Signed-off-by: default avatarNoam Camus <noamc@ezchip.com>
      Signed-off-by: default avatarTal Zilcer <talz@ezchip.com>
      Acked-by: default avatarAlexey Brodkin <abrodkin@synopsys.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0dd07709
    • Nimrod Andy's avatar
      net: fec: init MAC prior to mii bus probe · 55dd2753
      Nimrod Andy authored
      Below case causes mii bus probe failed:
      ifconfig eth0 down -> suspend/resume with Mega/fax mix off -> ifconfig eth0 up
      
      In i.MX6SX/i.MX7D chip, Mega/fast mix off feature is supported that means most of
      SOC power will be off including ENET MAC for power saving. Once ENET MAC power
      off, all initialized MAC registers reset to default, so in the case, it must
      init MAC prior to mii bus probe.
      Signed-off-by: default avatarFugang Duan <B38611@freescale.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      55dd2753
    • Anish Bhatt's avatar
      dcb : Fix incorrect documentation for struct dcb_app · 42bcce87
      Anish Bhatt authored
      While IEEE and CEE use the same structure to store apps, the selector
      and priority fields for both are different. Only the priority field is
      explained, add documentation explaining how the selector field differs
      for both.
      
      cgdcbxd code shows an example of how selector fields differ.
      Signed-off-by: default avatarAnish Bhatt <anish@chelsio.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      42bcce87
    • Scott Feldman's avatar
      switchdev: change BUG_ON to WARN for attr set failure case · e9fdaec0
      Scott Feldman authored
      This particular BUG_ON condition was checking for attr set err in the
      COMMIT phase, which isn't expected (it's a driver bug if PREPARE phase is
      OK but COMMIT fails).  But BUG_ON() is too strong for this case, so change
      to WARN().  BUG_ON() would be warranted if the system was corrupted beyond
      repair, but this is not the case here.
      Signed-off-by: default avatarScott Feldman <sfeldma@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e9fdaec0
    • David S. Miller's avatar
      Merge branch 'switchdev-vlan' · 06baa3d0
      David S. Miller authored
      Scott Feldman says:
      
      ====================
      switchdev; add VLAN support for port's bridge_getlink
      
      One more missing piece of the puzzle.  Add vlan dump support to switchdev
      port's bridge_getlink.  iproute2 "bridge vlan show" cmd already knows how
      to show the vlans installed on the bridge and the device , but (until now)
      no one implemented the port vlan part of the netlink PF_BRIDGE:RTM_GETLINK
      msg.  Before this patch, "bridge vlan show":
      
      	$ bridge -c vlan show
      	port    vlan ids
      	sw1p1    30-34			<< bridge side vlans
      		 57
      
      	sw1p1				<< device side vlans (missing)
      
      	sw1p2    57
      
      	sw1p2
      
      	sw1p3
      
      	sw1p4
      
      	br0     None
      
      (When the port is bridged, the output repeats the vlan list for the vlans
      on the bridge side of the port and the vlans on the device side of the
      port.  The listing above show no vlans for the device side even though they
      are installed).
      
      After this patch:
      
      	$ bridge -c vlan show
      	port    vlan ids
      	sw1p1    30-34			<< bridge side vlan
      		 57
      
      	sw1p1    30-34			<< device side vlans
      		 57
      		 3840 PVID
      
      	sw1p2    57
      
      	sw1p2    57
      		 3840 PVID
      
      	sw1p3    3842 PVID
      
      	sw1p4    3843 PVID
      
      	br0     None
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      06baa3d0
    • Scott Feldman's avatar
      switchdev; add VLAN support for port's bridge_getlink · 7d4f8d87
      Scott Feldman authored
      One more missing piece of the puzzle.  Add vlan dump support to switchdev
      port's bridge_getlink.  iproute2 "bridge vlan show" cmd already knows how
      to show the vlans installed on the bridge and the device , but (until now)
      no one implemented the port vlan part of the netlink PF_BRIDGE:RTM_GETLINK
      msg.  Before this patch, "bridge vlan show":
      
      	$ bridge -c vlan show
      	port    vlan ids
      	sw1p1    30-34			<< bridge side vlans
      		 57
      
      	sw1p1				<< device side vlans (missing)
      
      	sw1p2    57
      
      	sw1p2
      
      	sw1p3
      
      	sw1p4
      
      	br0     None
      
      (When the port is bridged, the output repeats the vlan list for the vlans
      on the bridge side of the port and the vlans on the device side of the
      port.  The listing above show no vlans for the device side even though they
      are installed).
      
      After this patch:
      
      	$ bridge -c vlan show
      	port    vlan ids
      	sw1p1    30-34			<< bridge side vlan
      		 57
      
      	sw1p1    30-34			<< device side vlans
      		 57
      		 3840 PVID
      
      	sw1p2    57
      
      	sw1p2    57
      		 3840 PVID
      
      	sw1p3    3842 PVID
      
      	sw1p4    3843 PVID
      
      	br0     None
      
      I re-used ndo_dflt_bridge_getlink to add vlan fill call-back func.
      switchdev support adds an obj dump for VLAN objects, using the same
      call-back scheme as FDB dump.  Support included for both compressed and
      un-compressed vlan dumps.
      Signed-off-by: default avatarScott Feldman <sfeldma@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7d4f8d87
    • Scott Feldman's avatar
      switchdev: rename vlan vid_start to vid_begin · 3e3a78b4
      Scott Feldman authored
      Use vid_begin/end to be consistent with BRIDGE_VLAN_INFO_RANGE_BEGIN/END.
      Signed-off-by: default avatarScott Feldman <sfeldma@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3e3a78b4
    • Maninder Singh's avatar
      packet: remove handling of tx_ring · e8e85cc5
      Maninder Singh authored
      Remove handling of tx_ring in prb_setup_retire_blk_timer
      for TPACKET_V3 because init_prb_bdqc is called only for zero tx_ring
      and thus prb_setup_retire_blk_timer for zero tx_ring only.
      
      And also in functon init_prb_bdqc there is no usage of tx_ring.
      Thus removing tx_ring from init_prb_bdqc.
      Signed-off-by: default avatarManinder Singh <maninder1.s@samsung.com>
      Suggested-by: default avatarFrans Klaver <fransklaver@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e8e85cc5
    • Paul Gortmaker's avatar
      drivers/net: remove all references to obsolete Ethernet-HOWTO · 138b15ed
      Paul Gortmaker authored
      This howto made sense in the 1990s when users had to manually configure
      ISA cards with jumpers or vendor utilities, but with the implementation
      of PCI it became increasingly less and less relevant, to the point where
      it has been well over a decade since I last updated it.  And there is
      no value in anyone else taking over updating it either.
      
      However the references to it continue to spread as boiler plate text
      from one Kconfig file into the next.  We are not doing end users any
      favours by pointing them at this old document, so lets kill it with
      fire, once and for all, to hopefully stop any further spread.
      
      No code is changed in this commit, just Kconfig help text.
      Signed-off-by: default avatarPaul Gortmaker <paul.gortmaker@windriver.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      138b15ed
    • David S. Miller's avatar
      Merge branch 'stmmac-rk3368' · 69ae2f7a
      David S. Miller authored
      Heiko Stuebner says:
      
      ====================
      net: stmmac: dwmac-rk: add support for rk3368
      
      Apart from small cleanups, this series provides support for the dwmac
      on the new rk3368 ARM64 soc.
      
      Tested on a R88 board using a RMII phy.
      
      Changes since v1:
      - Adapt to changes resulting from patch d42202dc ("net: stmmac:
      dwmac-rk: Don't add function name in info or err messages")
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      69ae2f7a
    • Heiko Stübner's avatar
      net: stmmac: dwmac-rk: add rk3368-specific data · df558854
      Heiko Stübner authored
      Add constants and callback functions for the dwmac on rk3368 socs.
      As can be seen, the base structure is the same, only registers and
      the bits in them moved slightly.
      Signed-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      df558854
    • Heiko Stübner's avatar
      net: stmmac: dwmac-rk: abstract access to mac settings in GRF · 0fb98db1
      Heiko Stübner authored
      The mac settings like RGMII/RMII, speeds etc are done in the so called
      "General Register Files", contain numerous other settings as well and
      always seem to change between Rockchip SoCs. Therefore abstract the
      register accesses into a per-soc ops struct to make this reusable on
      other Rockchip SoCs.
      Signed-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0fb98db1
    • Heiko Stübner's avatar
      net: stmmac: dwmac-rk: Fix clk rate when provided by soc · c48fa33c
      Heiko Stübner authored
      The first iteration of the dwmac-rk support did access an intermediate
      clock directly below the pll selector. This was removed in a subsequent
      revision, but the clock and one invocation remained. This results in
      the driver trying to set the rate of a non-existent clock when the soc
      and not some external source provides the phy clock for RMII phys.
      
      So set the rate of the correct clock and remove the remaining now
      completely unused definition.
      
      Fixes: 436f5ae08f9d ("GMAC: add driver for Rockchip RK3288 SoCs integrated GMAC")
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c48fa33c
    • Heiko Stübner's avatar
      net: stmmac: dwmac-rk: remove unused gpio register defines · 059dab08
      Heiko Stübner authored
      In a first version the driver did want to do some gpio wiggling, which
      of course never made it into the kernel, but somehow these register
      defines where forgotten. Remove them, as they shouldn't be here.
      Signed-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      059dab08
    • Andrew Lunn's avatar
      dsa: mv88x6xxx: Zero statistics counters · db687a56
      Andrew Lunn authored
      Zero the statistics counters when setting up the global
      registers. Otherwise the counters will remain from the last boot if
      the power has not been removed.
      Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      db687a56
    • David S. Miller's avatar
      Merge branch 'dsa-mv88e6xxx-debugfs' · 824831fa
      David S. Miller authored
      Andrew Lunn says:
      
      ====================
      debugfs for mv88e6xxx
      
      This patchset adds some debugfs files for seeing into a mv88e6xxx
      family of switch chips.
      
      DB   T/P  Vec State Addr
      003  Port 008   7   00:22:02:00:18:44
      003  Port 008   6   80:ee:73:83:60:27
      005  Port 020   7   94:10:3e:80:bc:f3
      0f8  Port 001   6   8e:25:13:53:44:de
      
      This walks all possible entries, so is a bit slow, but is always
      correct.
      
      Target Port
         0   15
         1   15
         2   15
         3   15
         4   15
         5   15
         6   15
         7   15
         8   15
         9   15
      -->snip<--
        31   15
      
      A rather boring example, since i only have one switch here. But this shows
      the routing between multiple switches.
      
          GLOBAL GLOBAL2   0    1    2    3    4    5    6
       0:  c804       0  1e4f 100f 100f 1e4f 1e0f  e07  e07
       1:    fe       0     3    3    3    3    3 c03e c03f
       2:     0    ffff     0    0    0    0    0    0    0
       3:     0    ffff  1721 1721 1721 1721 1721 1721 1721
       4:  6000     258   433  431  431  433  433 373f  433
       5:     0      ff     0    0    0    0    0    0    0
       6:  c000    1f0f  2026 2025 2023 3020 4020 501f 6020
       7:     0    707f     0    0    0    0    0    0    0
       8:     0    7800  2080 2080 2080 2080 2080 2080 2080
       9:     0    1600     1    1    1    1    1    1    1
       a:   148       0     0    0    0    0    0    0    0
       b:  4000    1000     1    2    4    8   10   20   40
       c:     0      7f     0    0    0    0    0    0    0
       d:  ffff     5f3     0    0    0    0    0    0    0
       e:  ffff       6     0    0    0    0    0    0    0
       f:  ffff     f00  dada dada dada dada dada dada dada
      10:     0       0     0    0    0    0    0    0    0
      11:     0       0     0    0    0    0    0    0    0
      12:  5555       0     0    0    0    0    0    0    0
      13:  5555       0    1a    0    0 1df0    0 1e07    0
      14:  aaaa     400     0    0    0    0    0    0    0
      15:  aaaa       0     0    0    0    0    0    0    0
      16:  ffff       0  6011 6011 6011 6011   33   33    0
      17:  ffff       0     0    0    0    0    0    0    0
      18:  fa41    1844  3210 3210 3210 3210 3210 3210 3210
      19:     0     1e1  7654 7654 7654 7654 7654 7654 7654
      1a:  5550       0     0    0    0    0    0    0    0
      1b:   1fb    f869  8000 8000 8000 8000 8000 8000 8000
      1c:     0       0     0    0    0    0    0    0    0
      1d:   c00       0     0    0    0    0    0    0    0
      1e:     0       0     0    0    0    0    0    0    0
      1f:     0       0     0    0    0    0    0    0    0
      
      All the switch registers which are directly accessible.
      
            Statistic       Port  0  Port  1  Port  2  Port  3  Port  4  Port  5  Port 6
           in_good_octets:     2176        0        0  4263711        0   499540       0
            in_bad_octets:    46050        0        0    50196        0        0       0
               in_unicast:        0        0        0     7693        0     7691       0
            in_broadcasts:        0        0        0        0        0        3       0
            in_multicasts:       34        0        0        0        0       27       0
                 in_pause:        0        0        0        0        0        0       0
             in_undersize:        0        0        0        0        0        0       0
             in_fragments:       45        0        0        2        0        0       0
              in_oversize:        0        0        0        0        0        0       0
                in_jabber:        0        0        0        0        0        0       0
              in_rx_error:        0        0        0        0        0        0       0
             in_fcs_error:      159        0        0       37        0        0       0
               out_octets:      808        0        0   496608      336  4267159       0
              out_unicast:        0        0        0     7691        0     7693       0
           out_broadcasts:        1        0        0        3        0        0       0
           out_multicasts:        9        0        0        6        4       34       0
                out_pause:        0        0        0        0        0        0       0
                excessive:        0        0        0        0        0        0       0
               collisions:        0        0        0        0        0        0       0
                 deferred:        0        0        0        0        0        0       0
                   single:        0        0        0        0        0        0       0
                 multiple:        0        0        0        0        0        0       0
            out_fcs_error:        0        0        0        0        0        0       0
                     late:        0        0        0        0        0        0       0
             hist_64bytes:       36        0        0     7577        0     7574       0
         hist_65_127bytes:       53        0        0      241        4      298       0
        hist_128_255bytes:       50        0        0       12        0       10       0
        hist_256_511bytes:       43        0        0        8        0        2       0
       hist_512_1023bytes:       18        0        0     7573        0     7564       0
      hist_1024_max_bytes:        3        0        0       19        0        0       0
           sw_in_discards:        0        0        0        0        0        0       0
           sw_in_filtered:        0        0        0        0        0        0       0
          sw_out_filtered:       34        0        0     7693        0     7721       0
      
      Of particular interest here is that you get to see all ports,
      including the CPU port and any DSA ports. You cannot get statistics
      for these ports via ethtool.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      824831fa
    • Andrew Lunn's avatar
      dsa: mv88x6xxx: Add debugfs interface for scratch registers · 56d95e22
      Andrew Lunn authored
      Allow the contents of the scratch registers to be shown in debugfs.
      Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      56d95e22
    • Andrew Lunn's avatar
      dsa: mv88x6xxx: Add debugfs interface for device map · d35bd876
      Andrew Lunn authored
      The device map is used to route packets between cascaded switches.
      Add dumping a switches device map via debugfs.
      Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d35bd876
    • Andrew Lunn's avatar
      dsa: mv88x6xxx: Add debugfs interface for statistics · 532c7a35
      Andrew Lunn authored
      Allow the contents of the statistics counters to be shown in debugfs.
      This is particularly useful for the cpu and dsa ports, which cannot be
      seen using ethtools -S.
      Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      532c7a35
    • Andrew Lunn's avatar
      dsa: mv88x6xxx: Refactor getting a single statistic · 80c4627b
      Andrew Lunn authored
      Move the code to retrieve a statistics counter into a function of its
      own, so it can later be reused.
      Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      80c4627b
    • Andrew Lunn's avatar
      dsa: mv88e6xxx: Add debugfs interface for ATU · 8a0a265d
      Andrew Lunn authored
      Dump the Address Translation Unit via a file in debugfs.
      Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8a0a265d
    • Andrew Lunn's avatar
      dsa: mv88e6xxx: Add debugfs interface for registers · 87c8cefb
      Andrew Lunn authored
      Allow the contents of the registers to be shown in debugfs.
      Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      87c8cefb
    • Shreyas Bhatewara's avatar
      vmxnet3: Changes for vmxnet3 adapter version 2 (fwd) · 45dac1d6
      Shreyas Bhatewara authored
      Make the driver understand adapter version 2.
      
      Cc: Rachel Lunnon <rachel_lunnon@stormagic.com>
      Signed-off-by: default avatarGuolin Yang <gyang@vmware.com>
      Signed-off-by: default avatarShreyas N Bhatewara <sbhatewara@vmware.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      45dac1d6
    • Shreyas Bhatewara's avatar
      vmxnet3: Fix memory leaks in rx path (fwd) · c41fcce9
      Shreyas Bhatewara authored
      If rcd length was zero, the page used for frag was not being released. It
      was being replaced with a newly allocated page. This change takes care
      of that memory leak.
      Signed-off-by: default avatarGuolin Yang <gyang@vmware.com>
      Signed-off-by: default avatarShreyas N Bhatewara <sbhatewara@vmware.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c41fcce9
    • Shreyas Bhatewara's avatar
      vmxnet3: Register shutdown handler for device (fwd) · e9ba47bf
      Shreyas Bhatewara authored
      Implement a handler for pci shutdown so that the driver has an
      opportunity to make sure that device is quiesced before the PCI
      switches to legacy IRQs. This way the possibility of
      "screaming interrupt" is avoided.
      Acked-by: default avatarShrikrishna Khare <skhare@vmware.com>
      Signed-off-by: default avatarShreyas N Bhatewara <sbhatewara@vmware.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e9ba47bf
    • Eric W. Biederman's avatar
      netfilter: nf_qeueue: Drop queue entries on nf_unregister_hook · 8405a8ff
      Eric W. Biederman authored
      Add code to nf_unregister_hook to flush the nf_queue when a hook is
      unregistered.  This guarantees that the pointer that the nf_queue code
      retains into the nf_hook list will remain valid while a packet is
      queued.
      
      I tested what would happen if we do not flush queued packets and was
      trivially able to obtain the oops below.  All that was required was
      to stop the nf_queue listening process, to delete all of the nf_tables,
      and to awaken the nf_queue listening process.
      
      > BUG: unable to handle kernel paging request at 0000000100000001
      > IP: [<0000000100000001>] 0x100000001
      > PGD b9c35067 PUD 0
      > Oops: 0010 [#1] SMP
      > Modules linked in:
      > CPU: 0 PID: 519 Comm: lt-nfqnl_test Not tainted
      > task: ffff8800b9c8c050 ti: ffff8800ba9d8000 task.ti: ffff8800ba9d8000
      > RIP: 0010:[<0000000100000001>]  [<0000000100000001>] 0x100000001
      > RSP: 0018:ffff8800ba9dba40  EFLAGS: 00010a16
      > RAX: ffff8800bab48a00 RBX: ffff8800ba9dba90 RCX: ffff8800ba9dba90
      > RDX: ffff8800b9c10128 RSI: ffff8800ba940900 RDI: ffff8800bab48a00
      > RBP: ffff8800b9c10128 R08: ffffffff82976660 R09: ffff8800ba9dbb28
      > R10: dead000000100100 R11: dead000000200200 R12: ffff8800ba940900
      > R13: ffffffff8313fd50 R14: ffff8800b9c95200 R15: 0000000000000000
      > FS:  00007fb91fc34700(0000) GS:ffff8800bfa00000(0000) knlGS:0000000000000000
      > CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
      > CR2: 0000000100000001 CR3: 00000000babfb000 CR4: 00000000000007f0
      > Stack:
      >  ffffffff8206ab0f ffffffff82982240 ffff8800bab48a00 ffff8800b9c100a8
      >  ffff8800b9c10100 0000000000000001 ffff8800ba940900 ffff8800b9c10128
      >  ffffffff8206bd65 ffff8800bfb0d5e0 ffff8800bab48a00 0000000000014dc0
      > Call Trace:
      >  [<ffffffff8206ab0f>] ? nf_iterate+0x4f/0xa0
      >  [<ffffffff8206bd65>] ? nf_reinject+0x125/0x190
      >  [<ffffffff8206dee5>] ? nfqnl_recv_verdict+0x255/0x360
      >  [<ffffffff81386290>] ? nla_parse+0x80/0xf0
      >  [<ffffffff8206c42c>] ? nfnetlink_rcv_msg+0x13c/0x240
      >  [<ffffffff811b2fec>] ? __memcg_kmem_get_cache+0x4c/0x150
      >  [<ffffffff8206c2f0>] ? nfnl_lock+0x20/0x20
      >  [<ffffffff82068159>] ? netlink_rcv_skb+0xa9/0xc0
      >  [<ffffffff820677bf>] ? netlink_unicast+0x12f/0x1c0
      >  [<ffffffff82067ade>] ? netlink_sendmsg+0x28e/0x650
      >  [<ffffffff81fdd814>] ? sock_sendmsg+0x44/0x50
      >  [<ffffffff81fde07b>] ? ___sys_sendmsg+0x2ab/0x2c0
      >  [<ffffffff810e8f73>] ? __wake_up+0x43/0x70
      >  [<ffffffff8141a134>] ? tty_write+0x1c4/0x2a0
      >  [<ffffffff81fde9f4>] ? __sys_sendmsg+0x44/0x80
      >  [<ffffffff823ff8d7>] ? system_call_fastpath+0x12/0x6a
      > Code:  Bad RIP value.
      > RIP  [<0000000100000001>] 0x100000001
      >  RSP <ffff8800ba9dba40>
      > CR2: 0000000100000001
      > ---[ end trace 08eb65d42362793f ]---
      
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatar"Eric W. Biederman" <ebiederm@xmission.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8405a8ff
    • Eric W. Biederman's avatar
      netfilter: nftables: Do not run chains in the wrong network namespace · fdab6a4c
      Eric W. Biederman authored
      Currenlty nf_tables chains added in one network namespace are being
      run in all network namespace.  The issues are myriad with the simplest
      being an unprivileged user can cause any network packets to be dropped.
      
      Address this by simply not running nf_tables chains in the wrong
      network namespace.
      
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatar"Eric W. Biederman" <ebiederm@xmission.com>
      Acked-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      fdab6a4c
    • Pankaj Gupta's avatar
      macvtap: Increase limit of macvtap queues · dfe816c5
      Pankaj Gupta authored
      Macvtap should be compatible with tuntap for
      maximum number of queues.
      
      commit 'baf71c5c (tuntap:
      Increase the number of queues in tun.)' removes
      the limitations and increases number of queues in tuntap.
      Now, Its safe to increase number of queues in Macvtap as well.
      
      This patch also modifies 'macvtap_del_queues' function
      to avoid extra memory allocation in stack.
      
      Changes from v1->v2 :
      Michael S. Tsirkin, Jason Wang  :
                        Better way to use linked list to
      avoid use of extra memory in stack.
      Sergei Shtylyov : Specify dependent commit's summary.
      Signed-off-by: default avatarPankaj Gupta <pagupta@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      dfe816c5
    • Daniel Wagner's avatar
      bpf: BPF based latency tracing · 0fb1170e
      Daniel Wagner authored
      BPF offers another way to generate latency histograms. We attach
      kprobes at trace_preempt_off and trace_preempt_on and calculate the
      time it takes to from seeing the off/on transition.
      
      The first array is used to store the start time stamp. The key is the
      CPU id. The second array stores the log2(time diff). We need to use
      static allocation here (array and not hash tables). The kprobes
      hooking into trace_preempt_on|off should not calling any dynamic
      memory allocation or free path. We need to avoid recursivly
      getting called. Besides that, it reduces jitter in the measurement.
      
      CPU 0
            latency        : count     distribution
             1 -> 1        : 0        |                                        |
             2 -> 3        : 0        |                                        |
             4 -> 7        : 0        |                                        |
             8 -> 15       : 0        |                                        |
            16 -> 31       : 0        |                                        |
            32 -> 63       : 0        |                                        |
            64 -> 127      : 0        |                                        |
           128 -> 255      : 0        |                                        |
           256 -> 511      : 0        |                                        |
           512 -> 1023     : 0        |                                        |
          1024 -> 2047     : 0        |                                        |
          2048 -> 4095     : 166723   |*************************************** |
          4096 -> 8191     : 19870    |***                                     |
          8192 -> 16383    : 6324     |                                        |
         16384 -> 32767    : 1098     |                                        |
         32768 -> 65535    : 190      |                                        |
         65536 -> 131071   : 179      |                                        |
        131072 -> 262143   : 18       |                                        |
        262144 -> 524287   : 4        |                                        |
        524288 -> 1048575  : 1363     |                                        |
      CPU 1
            latency        : count     distribution
             1 -> 1        : 0        |                                        |
             2 -> 3        : 0        |                                        |
             4 -> 7        : 0        |                                        |
             8 -> 15       : 0        |                                        |
            16 -> 31       : 0        |                                        |
            32 -> 63       : 0        |                                        |
            64 -> 127      : 0        |                                        |
           128 -> 255      : 0        |                                        |
           256 -> 511      : 0        |                                        |
           512 -> 1023     : 0        |                                        |
          1024 -> 2047     : 0        |                                        |
          2048 -> 4095     : 114042   |*************************************** |
          4096 -> 8191     : 9587     |**                                      |
          8192 -> 16383    : 4140     |                                        |
         16384 -> 32767    : 673      |                                        |
         32768 -> 65535    : 179      |                                        |
         65536 -> 131071   : 29       |                                        |
        131072 -> 262143   : 4        |                                        |
        262144 -> 524287   : 1        |                                        |
        524288 -> 1048575  : 364      |                                        |
      CPU 2
            latency        : count     distribution
             1 -> 1        : 0        |                                        |
             2 -> 3        : 0        |                                        |
             4 -> 7        : 0        |                                        |
             8 -> 15       : 0        |                                        |
            16 -> 31       : 0        |                                        |
            32 -> 63       : 0        |                                        |
            64 -> 127      : 0        |                                        |
           128 -> 255      : 0        |                                        |
           256 -> 511      : 0        |                                        |
           512 -> 1023     : 0        |                                        |
          1024 -> 2047     : 0        |                                        |
          2048 -> 4095     : 40147    |*************************************** |
          4096 -> 8191     : 2300     |*                                       |
          8192 -> 16383    : 828      |                                        |
         16384 -> 32767    : 178      |                                        |
         32768 -> 65535    : 59       |                                        |
         65536 -> 131071   : 2        |                                        |
        131072 -> 262143   : 0        |                                        |
        262144 -> 524287   : 1        |                                        |
        524288 -> 1048575  : 174      |                                        |
      CPU 3
            latency        : count     distribution
             1 -> 1        : 0        |                                        |
             2 -> 3        : 0        |                                        |
             4 -> 7        : 0        |                                        |
             8 -> 15       : 0        |                                        |
            16 -> 31       : 0        |                                        |
            32 -> 63       : 0        |                                        |
            64 -> 127      : 0        |                                        |
           128 -> 255      : 0        |                                        |
           256 -> 511      : 0        |                                        |
           512 -> 1023     : 0        |                                        |
          1024 -> 2047     : 0        |                                        |
          2048 -> 4095     : 29626    |*************************************** |
          4096 -> 8191     : 2704     |**                                      |
          8192 -> 16383    : 1090     |                                        |
         16384 -> 32767    : 160      |                                        |
         32768 -> 65535    : 72       |                                        |
         65536 -> 131071   : 32       |                                        |
        131072 -> 262143   : 26       |                                        |
        262144 -> 524287   : 12       |                                        |
        524288 -> 1048575  : 298      |                                        |
      
      All this is based on the trace3 examples written by
      Alexei Starovoitov <ast@plumgrid.com>.
      Signed-off-by: default avatarDaniel Wagner <daniel.wagner@bmw-carit.de>
      Cc: Alexei Starovoitov <ast@plumgrid.com>
      Cc: Alexei Starovoitov <ast@plumgrid.com>
      Cc: "David S. Miller" <davem@davemloft.net>
      Cc: Daniel Borkmann <daniel@iogearbox.net>
      Cc: Ingo Molnar <mingo@kernel.org>
      Cc: linux-kernel@vger.kernel.org
      Cc: netdev@vger.kernel.org
      Acked-by: default avatarAlexei Starovoitov <ast@plumgrid.com>
      Acked-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0fb1170e
    • Nikolay Aleksandrov's avatar
      bridge: multicast: start querier timer when running user-space stp · 7ce42de1
      Nikolay Aleksandrov authored
      When STP is running in user-space and querier is configured, the
      querier timer is not started when a port goes to a non-blocking state.
      This patch unifies the user- and kernel-space stp multicast port enable
      path and enables it in all states different from blocking. Note that when a
      port goes in BR_STATE_DISABLED it's not enabled because that is handled
      in the beginning of the port list loop.
      Signed-off-by: default avatarNikolay Aleksandrov <nikolay@cumulusnetworks.com>
      Acked-by: default avatarHerbert Xu <herbert@gondor.apana.org.au>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7ce42de1
    • David S. Miller's avatar
      Merge tag 'nfc-next-4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next · b1dfe0a8
      David S. Miller authored
      NFC 4.2 2nd pull request
      
      This one only contains a one liner fix for a typo that I
      introduced while cleaning some of the nfcmrvl patches that
      were part of the 1st 4.2 pull request.
      b1dfe0a8
    • David S. Miller's avatar
      Merge branch 'for-upstream' of... · bfdc8dbd
      David S. Miller authored
      Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
      
      Johan Hedberg says:
      
      ====================
      pull request: bluetooth-next 2015-06-18
      
      Here's the final bluetooth-next pull request for 4.2.
      
       - Cleanups & fixes to 802.15.4 code and related drivers
       - Fix btusb driver memory leak
       - New USB IDs for Atheros controllers
       - Support for BCM4324B3 UART based Broadcom controller
       - Fix for Bluetooth encryption key size handling
       - Broadcom controller initialization fixes
       - Support for Intel controller DDC parameters
       - Support for multiple Bluetooth LE advertising instances
       - Fix for HCI user channel cleanup path
      
      Please let me know if there are any issues pulling. Thanks.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bfdc8dbd
    • Mahesh Bandewar's avatar
      bonding: Display LACP info only to CAP_NET_ADMIN capable user · 4cd6b475
      Mahesh Bandewar authored
      Actor and Partner details can be accessed via proc-fs, sys-fs
      entries or netlink interface. These interfaces are world readable
      at this moment. The earlier patch-series made the LACP communication
      secure to avoid nuisance attack from within the same L2 domain but
      it did not prevent "someone unprivileged" looking at that information
      on host and perform the same act.
      
      This patch essentially avoids spitting those entries if the user
      in question does not have enough privileges.
      Signed-off-by: default avatarMahesh Bandewar <maheshb@google.com>
      Signed-off-by: default avatarAndy Gospodarek <gospo@cumulusnetworks.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4cd6b475
    • David S. Miller's avatar
      Merge branch 'macb-sama5d2' · 1f02c09b
      David S. Miller authored
      Nicolas Ferre says:
      
      ====================
      net/macb: add sama5d2 support
      
      This series is basically the support for another flavor of the GEM IP
      configuration. It ended up being a series because of some little fixes made to
      the binding documentation before adding the new compatibility string.
      
      Bye,
      
      v2: - fix bindings
          - add sama5d2 compatibility string to the binding documentation
      ====================
      Acked-by: default avatarAlexandre Belloni <alexandre.belloni@free-electrons.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1f02c09b
    • Cyrille Pitchen's avatar
      net/macb: add config for Atmel sama5d2 SoCs · 5c8fe711
      Cyrille Pitchen authored
      Add the compatible string for Atmel sama5d2 SoC family as the configuration
      options differ from other instances of the GEM.
      Signed-off-by: default avatarCyrille Pitchen <cyrille.pitchen@atmel.com>
      Signed-off-by: default avatarNicolas Ferre <nicolas.ferre@atmel.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5c8fe711
    • Nicolas Ferre's avatar
      net/macb: bindings doc: add sama5d2 compatibility sting · bb7506c9
      Nicolas Ferre authored
      Add sama5d2 to the biding documentation for this use of the GEM IP.
      Signed-off-by: default avatarNicolas Ferre <nicolas.ferre@atmel.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bb7506c9
    • Nicolas Ferre's avatar
      net/macb: bindings doc/trivial: fix sama5d4 comment · f58393f4
      Nicolas Ferre authored
      On sama5d4, we only have a GEM IP that is configured to do 10/100 Mbits. So the
      use of "Gigabit" can be confusing.
      Signed-off-by: default avatarNicolas Ferre <nicolas.ferre@atmel.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f58393f4
    • Nicolas Ferre's avatar
      net/macb: bindings doc: fix compatibility string · f76a28c2
      Nicolas Ferre authored
      In the driver and the DT bindings we use the "atmel" prefix. Fix it in the
      binding documentation.
      Signed-off-by: default avatarNicolas Ferre <nicolas.ferre@atmel.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f76a28c2
    • Hiroaki SHIMODA's avatar
      inet_diag: Remove _bh suffix in inet_diag_dump_reqs(). · 3b188443
      Hiroaki SHIMODA authored
      inet_diag_dump_reqs() is called from inet_diag_dump_icsk() with BH
      disabled. So no need to disable BH in inet_diag_dump_reqs().
      Signed-off-by: default avatarHiroaki Shimoda <shimoda.hiroaki@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3b188443