- 21 Nov, 2023 7 commits
-
-
Jose Ignacio Tornos Martinez authored
Using generic ASIX Electronics Corp. AX88179 Gigabit Ethernet device, the following test cycle has been implemented: - power on - check logs - shutdown - after detecting the system shutdown, disconnect power - after approximately 60 seconds of sleep, power is restored Running some cycles, sometimes error logs like this appear: kernel: ax88179_178a 2-9:1.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0001: -19 kernel: ax88179_178a 2-9:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0001: -19 ... These failed operation are happening during ax88179_reset execution, so the initialization could not be correct. In order to avoid this, we need to increase the delay after reset and clock initial operations. By using these larger values, many cycles have been run and no failed operations appear. It would be better to check some status register to verify when the operation has finished, but I do not have found any available information (neither in the public datasheets nor in the manufacturer's driver). The only available information for the necessary delays is the maufacturer's driver (original values) but the proposed values are not enough for the tested devices. Fixes: e2ca90c2 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver") Reported-by:Herb Wei <weihao.bj@ieisystem.com> Tested-by:
Jose Ignacio Tornos Martinez <jtornosm@redhat.com> Link: https://lore.kernel.org/r/20231120120642.54334-1-jtornosm@redhat.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Simon Horman authored
indirect_call_wrapper.h is not, strictly speaking, networking specific. However, it's git history indicates that in practice changes go through netdev and thus the netdev maintainers have effectively been taking responsibility for it. Formalise this by adding it to the NETWORKING [GENERAL] section in the MAINTAINERS file. It is not clear how many other files under include/linux fall into this category and it would be interesting, as a follow-up, to audit that and propose further updates to the MAINTAINERS file as appropriate. Link: https://lore.kernel.org/netdev/20231116010310.4664dd38@kernel.org/Signed-off-by:
Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20231120-indirect_call_wrapper-maintainer-v1-1-0a6bb1f7363e@kernel.orgSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Paolo Abeni authored
Haiyang Zhang says: ==================== hv_netvsc: fix race of netvsc, VF register, and slave bit There are some races between netvsc probe, set notifier, VF register, and slave bit setting. This patch set fixes them. ==================== Link: https://lore.kernel.org/r/1700411023-14317-1-git-send-email-haiyangz@microsoft.comSigned-off-by:
-
Long Li authored
When a VF is being exposed form the kernel, it should be marked as "slave" before exposing to the user-mode. The VF is not usable without netvsc running as master. The user-mode should never see a VF without the "slave" flag. This commit moves the code of setting the slave flag to the time before VF is exposed to user-mode. Cc: stable@vger.kernel.org Fixes: 0c195567 ("netvsc: transparent VF management") Signed-off-by:
Long Li <longli@microsoft.com> Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Acked-by:
Stephen Hemminger <stephen@networkplumber.org> Acked-by:
Dexuan Cui <decui@microsoft.com> Signed-off-by:
-
Haiyang Zhang authored
If VF NIC is registered earlier, NETDEV_REGISTER event is replayed, but NETDEV_POST_INIT is not. Move register_netdevice_notifier() earlier, so the call back function is set before probing. Cc: stable@vger.kernel.org Fixes: e04e7a7b ("hv_netvsc: Fix a deadlock by getting rtnl lock earlier in netvsc_probe()") Reported-by:
Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by:
-
Haiyang Zhang authored
The rtnl lock also needs to be held before rndis_filter_device_add() which advertises nvsp_2_vsc_capability / sriov bit, and triggers VF NIC offering and registering. If VF NIC finished register_netdev() earlier it may cause name based config failure. To fix this issue, move the call to rtnl_lock() before rndis_filter_device_add(), so VF will be registered later than netvsc / synthetic NIC, and gets a name numbered (ethX) after netvsc. Cc: stable@vger.kernel.org Fixes: e04e7a7b ("hv_netvsc: Fix a deadlock by getting rtnl lock earlier in netvsc_probe()") Reported-by:
-
Kunwu Chan authored
net/ipv4/route.c:783:46: warning: incorrect type in argument 2 (different base types) net/ipv4/route.c:783:46: expected unsigned int [usertype] key net/ipv4/route.c:783:46: got restricted __be32 [usertype] new_gw Fixes: 969447f2 ("ipv4: use new_gw for redirect neigh lookup") Suggested-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Kunwu Chan <chentao@kylinos.cn> Link: https://lore.kernel.org/r/20231119141759.420477-1-chentao@kylinos.cnSigned-off-by:
-
- 19 Nov, 2023 4 commits
-
-
Jakub Kicinski authored
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to all the sock diag modules in one fell swoop. Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Suman Ghosh authored
During 'ifconfig <netdev> down' one RSS memory was not getting freed. This patch fixes the same. Fixes: 81a43620 ("octeontx2-pf: Add RSS multi group support") Signed-off-by:
Suman Ghosh <sumang@marvell.com> Reviewed-by:
-
Eric Dumazet authored
wg_xmit() can be called concurrently, KCSAN reported [1] some device stats updates can be lost. Use DEV_STATS_INC() for this unlikely case. [1] BUG: KCSAN: data-race in wg_xmit / wg_xmit read-write to 0xffff888104239160 of 8 bytes by task 1375 on cpu 0: wg_xmit+0x60f/0x680 drivers/net/wireguard/device.c:231 __netdev_start_xmit include/linux/netdevice.h:4918 [inline] netdev_start_xmit include/linux/netdevice.h:4932 [inline] xmit_one net/core/dev.c:3543 [inline] dev_hard_start_xmit+0x11b/0x3f0 net/core/dev.c:3559 ... read-write to 0xffff888104239160 of 8 bytes by task 1378 on cpu 1: wg_xmit+0x60f/0x680 drivers/net/wireguard/device.c:231 __netdev_start_xmit include/linux/netdevice.h:4918 [inline] netdev_start_xmit include/linux/netdevice.h:4932 [inline] xmit_one net/core/dev.c:3543 [inline] dev_hard_start_xmit+0x11b/0x3f0 net/core/dev.c:3559 ... v2: also change wg_packet_consume_data_done() (Hangbin Liu) and wg_packet_purge_staged_packets() Fixes: e7096c13 ("net: WireGuard secure network tunnel") Reported-by:syzbot <syzkaller@googlegroups.com> Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
Jiawen Wu authored
When the device uses a custom subsystem vendor ID, the function wx_sw_init() returns before the memory of 'wx->mac_table' is allocated. The null pointer will causes the kernel panic. Fixes: 79625f45 ("net: wangxun: Move MAC address handling to libwx") Signed-off-by:
Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by:
-
- 17 Nov, 2023 7 commits
-
-
Kees Cook authored
The netdev subsystem has had a subsystem process document for a while now. Link it appropriately in MAINTAINERS with the P: tag. Cc: Jakub Kicinski <kuba@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
David S. Miller authored
David Howells says: ==================== rxrpc: ACK handling fixes Here are a couple of patches to fix ACK handling in AF_RXRPC: (1) Allow RTT determination to use an ACK of any type as the response from which to calculate RTT, provided ack.serial matches the serial number of the outgoing packet. (2) Defer the response to a PING ACK packet (or any ACK with the REQUEST_ACK flag set) until after we've parsed the packet so that we carry up to date information if the Tx or Rx rings are advanced. ==================== Signed-off-by: -
David Howells authored
Defer the generation of a PING RESPONSE ACK in response to a PING ACK until we've parsed the PING ACK so that we pick up any changes to the packet queue so that we can update ackinfo. This is also applied to an ACK generated in response to an ACK with the REQUEST_ACK flag set. Note that whilst the problem was added in commit 248f219c, it didn't really matter at that point because the ACK was proposed in softirq mode and generated asynchronously later in process context, taking the latest values at the time. But this fix is only needed since the move to parse incoming packets in an I/O thread rather than in softirq and generate the ACK at point of proposal (b0346843). Fixes: 248f219c ("rxrpc: Rewrite the data and ack handling code") Signed-off-by:
David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: "David S. Miller" <davem@davemloft.net> cc: Eric Dumazet <edumazet@google.com> cc: Jakub Kicinski <kuba@kernel.org> cc: Paolo Abeni <pabeni@redhat.com> cc: linux-afs@lists.infradead.org cc: netdev@vger.kernel.org Signed-off-by:
-
David Howells authored
Fix RTT determination to be able to use any type of ACK as the response from which RTT can be calculated provided its ack.serial is non-zero and matches the serial number of an outgoing DATA or ACK packet. This shouldn't be limited to REQUESTED-type ACKs as these can have other types substituted for them for things like duplicate or out-of-order packets. Fixes: 4700c4d8 ("rxrpc: Fix loss of RTT samples due to interposed ACK") Signed-off-by:
-
Paolo Abeni authored
The blamed commit below introduced a typo causing 'gretap' test-case failures: ./rtnetlink.sh -t kci_test_gretap -v COMMAND: ip link add name test-dummy0 type dummy COMMAND: ip link set test-dummy0 up COMMAND: ip netns add testns COMMAND: ip link help gretap 2>&1 | grep -q '^Usage:' COMMAND: ip -netns testns link add dev gretap00 type gretap seq key 102 local 172.16.1.100 remote 172.16.1.200 COMMAND: ip -netns testns addr add dev gretap00 10.1.1.100/24 COMMAND: ip -netns testns link set dev gretap00 ups Error: either "dev" is duplicate, or "ups" is a garbage. COMMAND: ip -netns testns link del gretap00 COMMAND: ip -netns testns link add dev gretap00 type gretap external COMMAND: ip -netns testns link del gretap00 FAIL: gretap Fix it by using the correct keyword. Fixes: 9c2a19f7 ("kselftest: rtnetlink.sh: add verbose flag") Signed-off-by: -
Gerd Bayer authored
Since commit a72178cf ("net/smc: Fix dependency of SMC on ISM") you can build the ism code without selecting the SMC network protocol. That leaves some ism functions be reported as unused. Move these functions under the conditional compile with CONFIG_SMC. Also codify the suggestion to also configure the SMC protocol in ism's Kconfig - but with an "imply" rather than a "select" as SMC depends on other config options and allow for a deliberate decision not to build SMC. Also, mention that in ISM's help. Fixes: a72178cf ("net/smc: Fix dependency of SMC on ISM") Reported-by:
Randy Dunlap <rdunlap@infradead.org> Closes: https://lore.kernel.org/netdev/afd142a2-1fa0-46b9-8b2d-7652d41d3ab8@infradead.org/Signed-off-by:
Gerd Bayer <gbayer@linux.ibm.com> Reviewed-by:
Wenjia Zhang <wenjia@linux.ibm.com> Reviewed-by:
-
David Howells authored
Fix some superficial issues with the tracing of rxrpc_bundle structs, including: (1) Set the debug_id when the bundle is allocated rather than when it is set up so that the "NEW" trace line displays the correct bundle ID. (2) Show the refcount when emitting the "FREE" traceline. Signed-off-by:
-
- 16 Nov, 2023 22 commits
-
-
Jean Delvare authored
Only present the DWMAC_LOONGSON option on architectures where it can actually be used. This follows the same logic as the DWMAC_INTEL option. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Cc: Keguang Zhang <keguang.zhang@gmail.com> Reviewed-by:
-
Oliver Neukum authored
If a device sends a packet that is inbetween 0 and sizeof(u64) the value passed to skb_trim() as length will wrap around ending up as some very large value. The driver will then proceed to parse the header located at that position, which will either oops or process some random value. The fix is to check against sizeof(u64) rather than 0, which the driver currently does. The issue exists since the introduction of the driver. Signed-off-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from BPF and netfilter. Current release - regressions: - core: fix undefined behavior in netdev name allocation - bpf: do not allocate percpu memory at init stage - netfilter: nf_tables: split async and sync catchall in two functions - mptcp: fix possible NULL pointer dereference on close Current release - new code bugs: - eth: ice: dpll: fix initial lock status of dpll Previous releases - regressions: - bpf: fix precision backtracking instruction iteration - af_unix: fix use-after-free in unix_stream_read_actor() - tipc: fix kernel-infoleak due to uninitialized TLV value - eth: bonding: stop the device in bond_setup_by_slave() - eth: mlx5: - fix double free of encap_header - avoid referencing skb after free-ing in drop path - eth: hns3: fix VF reset - eth: mvneta: fix calls to page_pool_get_stats Previous releases - always broken: - core: set SOCK_RCU_FREE before inserting socket into hashtable - bpf: fix control-flow graph checking in privileged mode - eth: ppp: limit MRU to 64K - eth: stmmac: avoid rx queue overrun - eth: icssg-prueth: fix error cleanup on failing initialization - eth: hns3: fix out-of-bounds access may occur when coalesce info is read via debugfs - eth: cortina: handle large frames Misc: - selftests: gso: support CONFIG_MAX_SKB_FRAGS up to 45" * tag 'net-6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (78 commits) macvlan: Don't propagate promisc change to lower dev in passthru net: sched: do not offload flows with a helper in act_ct net/mlx5e: Check return value of snprintf writing to fw_version buffer for representors net/mlx5e: Check return value of snprintf writing to fw_version buffer net/mlx5e: Reduce the size of icosq_str net/mlx5: Increase size of irq name buffer net/mlx5e: Update doorbell for port timestamping CQ before the software counter net/mlx5e: Track xmit submission to PTP WQ after populating metadata map net/mlx5e: Avoid referencing skb after free-ing in drop path of mlx5e_sq_xmit_wqe net/mlx5e: Don't modify the peer sent-to-vport rules for IPSec offload net/mlx5e: Fix pedit endianness net/mlx5e: fix double free of encap_header in update funcs net/mlx5e: fix double free of encap_header net/mlx5: Decouple PHC .adjtime and .adjphase implementations net/mlx5: DR, Allow old devices to use multi destination FTE net/mlx5: Free used cpus mask when an IRQ is released Revert "net/mlx5: DR, Supporting inline WQE when possible" bpf: Do not allocate percpu memory at init stage net: Fix undefined behavior in netdev name allocation dt-bindings: net: ethernet-controller: Fix formatting error ... -
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen updates from Juergen Gross: - A fix in the Xen events driver avoiding the use of RCU after the call to rcu_report_dead() when taking a cpu down - A fix for running as Xen dom0 to line up ACPI's idea of power management capabilities with the one of Xen - A cleanup eliminating several kernel-doc warnings in Xen related code - A cleanup series of the Xen events driver * tag 'for-linus-6.7a-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/events: remove some info_for_irq() calls in pirq handling xen/events: modify internal [un]bind interfaces xen/events: drop xen_allocate_irqs_dynamic() xen/events: remove some simple helpers from events_base.c xen/events: reduce externally visible helper functions xen/events: remove unused functions xen/events: fix delayed eoi list handling xen/shbuf: eliminate 17 kernel-doc warnings acpi/processor: sanitize _OSC/_PDC capabilities for Xen dom0 xen/events: avoid using info_for_irq() in xen_send_IPI_one()
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds authored
Pull virtio fixes from Michael Tsirkin: "Bugfixes all over the place" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost-vdpa: fix use after free in vhost_vdpa_probe() virtio_pci: Switch away from deprecated irq_set_affinity_hint riscv, qemu_fw_cfg: Add support for RISC-V architecture vdpa_sim_blk: allocate the buffer zeroed virtio_pci: move structure to a header
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfPaolo Abeni authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Remove unused variable causing compilation warning in nft_set_rbtree, from Yang Li. This unused variable is a left over from previous merge window. 2) Possible return of uninitialized in nf_conntrack_bridge, from Linkui Xiao. This is there since nf_conntrack_bridge is available. 3) Fix incorrect pointer math in nft_byteorder, from Dan Carpenter. Problem has been there since 2016. 4) Fix bogus error in destroy set element command. Problem is there since this new destroy command was added. 5) Fix race condition in ipset between swap and destroy commands and add/del/test control plane. This problem is there since ipset was merged. 6) Split async and sync catchall GC in two function to fix unsafe iteration over RCU. This is a fix-for-fix that was included in the previous pull request. * tag 'nf-23-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: split async and sync catchall in two functions netfilter: ipset: fix race condition between swap/destroy and kernel side add/del/test netfilter: nf_tables: bogus ENOENT when destroying element which does not exist netfilter: nf_tables: fix pointer math issue in nft_byteorder_eval() netfilter: nf_conntrack_bridge: initialize err to 0 netfilter: nft_set_rbtree: Remove unused variable nft_net ==================== Link: https://lore.kernel.org/r/20231115184514.8965-1-pablo@netfilter.orgSigned-off-by:
-
Vlad Buslov authored
Macvlan device in passthru mode sets its lower device promiscuous mode according to its MACVLAN_FLAG_NOPROMISC flag instead of synchronizing it to its own promiscuity setting. However, macvlan_change_rx_flags() function doesn't check the mode before propagating such changes to the lower device which can cause net_device->promiscuity counter overflow as illustrated by reproduction example [0] and resulting dmesg log [1]. Fix the issue by first verifying the mode in macvlan_change_rx_flags() function before propagating promiscuous mode change to the lower device. [0]: ip link add macvlan1 link enp8s0f0 type macvlan mode passthru ip link set macvlan1 promisc on ip l set dev macvlan1 up ip link set macvlan1 promisc off ip l set dev macvlan1 down ip l set dev macvlan1 up [1]: [ 5156.281724] macvlan1: entered promiscuous mode [ 5156.285467] mlx5_core 0000:08:00.0 enp8s0f0: entered promiscuous mode [ 5156.287639] macvlan1: left promiscuous mode [ 5156.288339] mlx5_core 0000:08:00.0 enp8s0f0: left promiscuous mode [ 5156.290907] mlx5_core 0000:08:00.0 enp8s0f0: entered promiscuous mode [ 5156.317197] mlx5_core 0000:08:00.0 enp8s0f0: promiscuity touches roof, set promiscuity failed. promiscuity feature of device might be broken. Fixes: efdbd2b3 ("macvlan: Propagate promiscuity setting to lower devices.") Reviewed-by:
Gal Pressman <gal@nvidia.com> Signed-off-by:
Vlad Buslov <vladbu@nvidia.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20231114175915.1649154-1-vladbu@nvidia.comSigned-off-by:
-
Xin Long authored
There is no hardware supporting ct helper offload. However, prior to this patch, a flower filter with a helper in the ct action can be successfully set into the HW, for example (eth1 is a bnxt NIC): # tc qdisc add dev eth1 ingress_block 22 ingress # tc filter add block 22 proto ip flower skip_sw ip_proto tcp \ dst_port 21 ct_state -trk action ct helper ipv4-tcp-ftp # tc filter show dev eth1 ingress filter block 22 protocol ip pref 49152 flower chain 0 handle 0x1 eth_type ipv4 ip_proto tcp dst_port 21 ct_state -trk skip_sw in_hw in_hw_count 1 <---- action order 1: ct zone 0 helper ipv4-tcp-ftp pipe index 2 ref 1 bind 1 used_hw_stats delayed This might cause the flower filter not to work as expected in the HW. This patch avoids this problem by simply returning -EOPNOTSUPP in tcf_ct_offload_act_setup() to not allow to offload flows with a helper in act_ct. Fixes: a21b06e7 ("net: sched: add helper support in act_ct") Signed-off-by:Xin Long <lucien.xin@gmail.com> Reviewed-by:
Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/f8685ec7702c4a448a1371a8b34b43217b583b9d.1699898008.git.lucien.xin@gmail.comSigned-off-by:
-
Jakub Kicinski authored
Saeed Mahameed says: ==================== This series provides bug fixes to mlx5 driver. ==================== Link: https://lore.kernel.org/r/20231114215846.5902-1-saeed@kernel.org/Signed-off-by:
-
Rahul Rameshbabu authored
Treat the operation as an error case when the return value is equivalent to the size of the name buffer. Failed to write null terminator to the name buffer, making the string malformed and should not be used. Provide a string with only the firmware version when forming the string with the board id fails. This logic for representors is identical to normal flow with ethtool. Without check, will trigger -Wformat-truncation with W=1. drivers/net/ethernet/mellanox/mlx5/core/en_rep.c: In function 'mlx5e_rep_get_drvinfo': drivers/net/ethernet/mellanox/mlx5/core/en_rep.c:78:31: warning: '%.16s' directive output may be truncated writing up to 16 bytes into a region of size between 13 and 22 [-Wformat-truncation=] 78 | "%d.%d.%04d (%.16s)", | ^~~~~ drivers/net/ethernet/mellanox/mlx5/core/en_rep.c:77:9: note: 'snprintf' output between 12 and 37 bytes into a destination of size 32 77 | snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version), | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 78 | "%d.%d.%04d (%.16s)", | ~~~~~~~~~~~~~~~~~~~~~ 79 | fw_rev_maj(mdev), fw_rev_min(mdev), | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 80 | fw_rev_sub(mdev), mdev->board_id); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fixes: cf83c8fd ("net/mlx5e: Add missing ethtool driver info for representors") Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6d4ab2e97dcfbcd748ae71761a9d8e5e41cc732cSigned-off-by:Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by:
Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20231114215846.5902-16-saeed@kernel.orgSigned-off-by:
-
Rahul Rameshbabu authored
Treat the operation as an error case when the return value is equivalent to the size of the name buffer. Failed to write null terminator to the name buffer, making the string malformed and should not be used. Provide a string with only the firmware version when forming the string with the board id fails. Without check, will trigger -Wformat-truncation with W=1. drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c: In function 'mlx5e_ethtool_get_drvinfo': drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:49:31: warning: '%.16s' directive output may be truncated writing up to 16 bytes into a region of size between 13 and 22 [-Wformat-truncation=] 49 | "%d.%d.%04d (%.16s)", | ^~~~~ drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:48:9: note: 'snprintf' output between 12 and 37 bytes into a destination of size 32 48 | snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version), | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 49 | "%d.%d.%04d (%.16s)", | ~~~~~~~~~~~~~~~~~~~~~ 50 | fw_rev_maj(mdev), fw_rev_min(mdev), fw_rev_sub(mdev), | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 51 | mdev->board_id); | ~~~~~~~~~~~~~~~ Fixes: 84e11edb ("net/mlx5e: Show board id in ethtool driver information") Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6d4ab2e97dcfbcd748ae71761a9d8e5e41cc732cSigned-off-by: -
Saeed Mahameed authored
icosq_str size is unnecessarily too long, and it causes a build warning -Wformat-truncation with W=1. Looking closely, It doesn't need to be 255B, hence this patch reduces the size to 32B which should be more than enough to host the string: "ICOSQ: 0x%x, ". While here, add a missing space in the formatted string. This fixes the following build warning: $ KCFLAGS='-Wall -Werror' $ make O=/tmp/kbuild/linux W=1 -s -j12 drivers/net/ethernet/mellanox/mlx5/core/ drivers/net/ethernet/mellanox/mlx5/core/en/reporter_rx.c: In function 'mlx5e_reporter_rx_timeout': drivers/net/ethernet/mellanox/mlx5/core/en/reporter_rx.c:718:56: error: ', CQ: 0x' directive output may be truncated writing 8 bytes into a region of size between 0 and 255 [-Werror=format-truncation=] 718 | "RX timeout on channel: %d, %sRQ: 0x%x, CQ: 0x%x", | ^~~~~~~~ drivers/net/ethernet/mellanox/mlx5/core/en/reporter_rx.c:717:9: note: 'snprintf' output between 43 and 322 bytes into a destination of size 288 717 | snprintf(err_str, sizeof(err_str), | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 718 | "RX timeout on channel: %d, %sRQ: 0x%x, CQ: 0x%x", | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 719 | rq->ix, icosq_str, rq->rqn, rq->cq.mcq.cqn); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fixes: 521f31af ("net/mlx5e: Allow RQ outside of channel context") Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6d4ab2e97dcfbcd748ae71761a9d8e5e41cc732cSigned-off-by: -
Rahul Rameshbabu authored
Without increased buffer size, will trigger -Wformat-truncation with W=1 for the snprintf operation writing to the buffer. drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c: In function 'mlx5_irq_alloc': drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c:296:7: error: '@pci:' directive output may be truncated writing 5 bytes into a region of size between 1 and 32 [-Werror=format-truncation=] 296 | "%s@pci:%s", name, pci_name(dev->pdev)); | ^~~~~ drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c:295:2: note: 'snprintf' output 6 or more bytes (assuming 37) into a destination of size 32 295 | snprintf(irq->name, MLX5_MAX_IRQ_NAME, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 296 | "%s@pci:%s", name, pci_name(dev->pdev)); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fixes: ada9f5d0 ("IB/mlx5: Fix eq names to display nicely in /proc/interrupts") Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6d4ab2e97dcfbcd748ae71761a9d8e5e41cc732cSigned-off-by: -
Rahul Rameshbabu authored
Previously, mlx5e_ptp_poll_ts_cq would update the device doorbell with the incremented consumer index after the relevant software counters in the kernel were updated. In the mlx5e_sq_xmit_wqe context, this would lead to either overrunning the device CQ or exceeding the expected software buffer size in the device CQ if the device CQ size was greater than the software buffer size. Update the relevant software counter only after updating the device CQ consumer index in the port timestamping napi_poll context. Log: mlx5_core 0000:08:00.0: cq_err_event_notifier:517:(pid 0): CQ error on CQN 0x487, syndrome 0x1 mlx5_core 0000:08:00.0 eth2: mlx5e_cq_error_event: cqn=0x000487 event=0x04 Fixes: 1880bc4e ("net/mlx5e: Add TX port timestamp support") Signed-off-by: -
Rahul Rameshbabu authored
Ensure the skb is available in metadata mapping to skbs before tracking the metadata index for detecting undelivered CQEs. If the metadata index is put in the tracking list before putting the skb in the map, the metadata index might be used for detecting undelivered CQEs before the relevant skb is available in the map, which can lead to a null-ptr-deref. Log: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] CPU: 0 PID: 1243 Comm: kworker/0:2 Not tainted 6.6.0-rc4+ #108 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: events mlx5e_rx_dim_work [mlx5_core] RIP: 0010:mlx5e_ptp_napi_poll+0x9a4/0x2290 [mlx5_core] Code: 8c 24 38 cc ff ff 4c 8d 3c c1 4c 89 f9 48 c1 e9 03 42 80 3c 31 00 0f 85 97 0f 00 00 4d 8b 3f 49 8d 7f 28 48 89 f9 48 c1 e9 03 <42> 80 3c 31 00 0f 85 8b 0f 00 00 49 8b 47 28 48 85 c0 0f 84 05 07 RSP: 0018:ffff8884d3c09c88 EFLAGS: 00010206 RAX: 0000000000000069 RBX: ffff8881160349d8 RCX: 0000000000000005 RDX: ffffed10218f48cf RSI: 0000000000000004 RDI: 0000000000000028 RBP: ffff888122707700 R08: 0000000000000001 R09: ffffed109a781383 R10: 0000000000000003 R11: 0000000000000003 R12: ffff88810c7a7a40 R13: ffff888122707700 R14: dffffc0000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8884d3c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f4f878dd6e0 CR3: 000000014d108002 CR4: 0000000000370eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> ? die_addr+0x3c/0xa0 ? exc_general_protection+0x144/0x210 ? asm_exc_general_protection+0x22/0x30 ? mlx5e_ptp_napi_poll+0x9a4/0x2290 [mlx5_core] ? mlx5e_ptp_napi_poll+0x8f6/0x2290 [mlx5_core] __napi_poll.constprop.0+0xa4/0x580 net_rx_action+0x460/0xb80 ? _raw_spin_unlock_irqrestore+0x32/0x60 ? __napi_poll.constprop.0+0x580/0x580 ? tasklet_action_common.isra.0+0x2ef/0x760 __do_softirq+0x26c/0x827 irq_exit_rcu+0xc2/0x100 common_interrupt+0x7f/0xa0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40 RIP: 0010:__kmem_cache_alloc_node+0xb/0x330 Code: 41 5d 41 5e 41 5f c3 8b 44 24 14 8b 4c 24 10 09 c8 eb d5 e8 b7 43 ca 01 0f 1f 80 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 57 <41> 56 41 89 d6 41 55 41 89 f5 41 54 49 89 fc 53 48 83 e4 f0 48 83 RSP: 0018:ffff88812c4079c0 EFLAGS: 00000246 RAX: 1ffffffff083c7fe RBX: ffff888100042dc0 RCX: 0000000000000218 RDX: 00000000ffffffff RSI: 0000000000000dc0 RDI: ffff888100042dc0 RBP: ffff88812c4079c8 R08: ffffffffa0289f96 R09: ffffed1025880ea9 R10: ffff888138839f80 R11: 0000000000000002 R12: 0000000000000dc0 R13: 0000000000000100 R14: 000000000000008c R15: ffff8881271fc450 ? cmd_exec+0x796/0x2200 [mlx5_core] kmalloc_trace+0x26/0xc0 cmd_exec+0x796/0x2200 [mlx5_core] mlx5_cmd_do+0x22/0xc0 [mlx5_core] mlx5_cmd_exec+0x17/0x30 [mlx5_core] mlx5_core_modify_cq_moderation+0x139/0x1b0 [mlx5_core] ? mlx5_add_cq_to_tasklet+0x280/0x280 [mlx5_core] ? lockdep_set_lock_cmp_fn+0x190/0x190 ? process_one_work+0x659/0x1220 mlx5e_rx_dim_work+0x9d/0x100 [mlx5_core] process_one_work+0x730/0x1220 ? lockdep_hardirqs_on_prepare+0x400/0x400 ? max_active_store+0xf0/0xf0 ? assign_work+0x168/0x240 worker_thread+0x70f/0x12d0 ? __kthread_parkme+0xd1/0x1d0 ? process_one_work+0x1220/0x1220 kthread+0x2d9/0x3b0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x2d/0x70 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork_asm+0x11/0x20 </TASK> Modules linked in: xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay mlx5_ib ib_uverbs ib_core zram zsmalloc mlx5_core fuse ---[ end trace 0000000000000000 ]--- Fixes: 3178308a ("net/mlx5e: Make tx_port_ts logic resilient to out-of-order CQEs") Signed-off-by:Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
-
Rahul Rameshbabu authored
When SQ is a port timestamping SQ for PTP, do not access tx flags of skb after free-ing the skb. Free the skb only after all references that depend on it have been handled in the dropped WQE path. Fixes: 3178308a ("net/mlx5e: Make tx_port_ts logic resilient to out-of-order CQEs") Signed-off-by:
-
Jianbo Liu authored
As IPSec packet offload in switchdev mode is not supported with LAG, it's unnecessary to modify those sent-to-vport rules to the peer eswitch. Fixes: c6c2bf5d ("net/mlx5e: Support IPsec packet offload for TX in switchdev mode") Signed-off-by:
Jianbo Liu <jianbol@nvidia.com> Reviewed-by:
Leon Romanovsky <leonro@nvidia.com> Reviewed-by:
Roi Dayan <roid@nvidia.com> Signed-off-by:
-
Vlad Buslov authored
Referenced commit addressed endianness issue in mlx5 pedit implementation in ad hoc manner instead of systematically treating integer values according to their types which left pedit fields of sizes not equal to 4 and where the bytes being modified are not least significant ones broken on big endian machines since wrong bits will be consumed during parsing which leads to following example error when applying pedit to source and destination MAC addresses: [Wed Oct 18 12:52:42 2023] mlx5_core 0001:00:00.1 p1v3_r: attempt to offload an unsupported field (cmd 0) [Wed Oct 18 12:52:42 2023] mask: 00000000330c5b68: 00 00 00 00 ff ff 00 00 00 00 ff ff 00 00 00 00 ................ [Wed Oct 18 12:52:42 2023] mask: 0000000017d22fd9: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [Wed Oct 18 12:52:42 2023] mask: 000000008186d717: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [Wed Oct 18 12:52:42 2023] mask: 0000000029eb6149: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [Wed Oct 18 12:52:42 2023] mask: 000000007ed103e4: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [Wed Oct 18 12:52:42 2023] mask: 00000000db8101a6: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [Wed Oct 18 12:52:42 2023] mask: 00000000ec3c08a9: 00 00 00 00 00 00 00 00 00 00 00 00 ............ Treat masks and values of pedit and filter match as network byte order, refactor pointers to them to void pointers instead of confusing u32 pointers and only cast to pointer-to-integer when reading a value from them. Treat pedit mlx5_fields->field_mask as host byte order according to its type u32, change the constants in fields array accordingly. Fixes: 82198d8b ("net/mlx5e: Fix endianness when calculating pedit mask first bit") Signed-off-by:
-
Gavin Li authored
Follow up to the previous patch to fix the same issue for mlx5e_tc_tun_update_header_ipv4{6} when mlx5_packet_reformat_alloc() fails. When mlx5_packet_reformat_alloc() fails, the encap_header allocated in mlx5e_tc_tun_update_header_ipv4{6} will be released within it. However, e->encap_header is already set to the previously freed encap_header before mlx5_packet_reformat_alloc(). As a result, the later mlx5e_encap_put() will free e->encap_header again, causing a double free issue. mlx5e_encap_put() --> mlx5e_encap_dealloc() --> kfree(e->encap_header) This patch fix it by not setting e->encap_header until mlx5_packet_reformat_alloc() success. Fixes: a54e20b4 ("net/mlx5e: Add basic TC tunnel set action for SRIOV offloads") Signed-off-by:Gavin Li <gavinl@nvidia.com> Signed-off-by:
-
Dust Li authored
When mlx5_packet_reformat_alloc() fails, the encap_header allocated in mlx5e_tc_tun_create_header_ipv4{6} will be released within it. However, e->encap_header is already set to the previously freed encap_header before mlx5_packet_reformat_alloc(). As a result, the later mlx5e_encap_put() will free e->encap_header again, causing a double free issue. mlx5e_encap_put() --> mlx5e_encap_dealloc() --> kfree(e->encap_header) This happens when cmd: MLX5_CMD_OP_ALLOC_PACKET_REFORMAT_CONTEXT fail. This patch fix it by not setting e->encap_header until mlx5_packet_reformat_alloc() success. Fixes: d589e785 ("net/mlx5e: Allow concurrent creation of encap entries") Reported-by:Cruz Zhao <cruzzhao@linux.alibaba.com> Reported-by:
Tianchen Ding <dtcccc@linux.alibaba.com> Signed-off-by:
Dust Li <dust.li@linux.alibaba.com> Reviewed-by:
-
Rahul Rameshbabu authored
When running a phase adjustment operation, the free running clock should not be modified at all. The phase control keyword is intended to trigger an internal servo on the device that will converge to the provided delta. A free running counter cannot implement phase adjustment. Fixes: 8e11a68e ("net/mlx5: Add adjphase function to support hardware-only offset control") Signed-off-by:
-
Erez Shitrit authored
The current check isn't aware of old devices that don't have the relevant FW capability. This patch allows multi destination FTE in old cards, as it was before this check. Fixes: f6f46e71 ("net/mlx5: DR, Add check for multi destination FTE") Signed-off-by:
Erez Shitrit <erezsh@nvidia.com> Reviewed-by:
Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by:
-
