- 01 Jun, 2014 40 commits
-
-
YoungJun Cho authored
This patch adds ipp_remove_id() for idr resource free. Signed-off-by:
YoungJun Cho <yj44.cho@samsung.com> Acked-by:
Seong-Woo Kim <sw0312.kim@samsung.com> Acked-by:
Kyungmin Park <kyungmin.park@samsung.com> Tested-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
YoungJun Cho authored
This patch adds cmd_lock for cmd_list synchronization. Signed-off-by:
-
YoungJun Cho authored
The ippdrv->cmd_list requires cmd_lock. So renames cmd_lock to lock for context. Signed-off-by:
-
YoungJun Cho authored
This patch removes duplicated setting. Signed-off-by:
Seong-Woo Kim <sw0312.cho@samsung.com> Acked-by:
-
YoungJun Cho authored
list_for_each_entry() handles empty lists, so there is no need to check whether the list is empty first. Signed-off-by:
-
Sachin Kamat authored
PTR_ERR_OR_ZERO simplifies the code. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Acked-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
-
Rahul Sharma authored
System hangs when FIMD registers are accessed to disable hardware overlays. This is because of the clocks which are not enabled before register access. 'Hardware overlay disable' is cleaned from the FIMD probe. Signed-off-by:
Rahul Sharma <rahul.sharma@samsung.com> Signed-off-by:
-
Sachin Kamat authored
Silences the following warning: WARNING: space prohibited before semicolon Signed-off-by:
-
Andrzej Hajda authored
DPI, DSI and DP drivers will not work without FIMD. The patch adds appropriate dependencies in Kconfig. Signed-off-by:
-
Andrzej Hajda authored
The patch fixes unlocking in exynos_drm_component_del. Signed-off-by:
-
Andrzej Hajda authored
fimc_dst_get_buf_seq returns number of buffers so the name should be fimc_dst_get_buf_count. Function body has been simplified. Signed-off-by:
-
Andrzej Hajda authored
Function fimc_dst_set_buf_seq is called by irq handler so it should not use mutexes. This patch fixes it. Signed-off-by:
-
Andrzej Hajda authored
HW access macros implicitly depended on presence of ctx local variable. This patch replaces them with C functions. Signed-off-by:
-
Andrzej Hajda authored
The name fimc_handle_irq suggests it is irq handler, but the function is for irq mask configuration. The patch renames the function to fimc_mask_irq and removes unused arguments. Signed-off-by:
-
Andrzej Hajda authored
The patch replaces dedicated function for scaling ratio calculation by fls calls. Signed-off-by:
-
Andrzej Hajda authored
prop_list is always allocated, so instead of allocating it dynamically the pointer can be replaced by the structure itself. Signed-off-by:
-
Andrzej Hajda authored
prop_list.ipp_id field is not initialized properly. The patch fixes it, additionally it removes redundant field from ippdrv. Signed-off-by:
-
Andrzej Hajda authored
Due to incorrect assignment in EXYNOS_IPP_GET_PROPERTY IOCTL handler this IOCTL did not work at all. The patch fixes it. Signed-off-by:
-
Sachin Kamat authored
These symbols are local to this file. Signed-off-by:
-
Sachin Kamat authored
i2c.h was included twice. Signed-off-by:
-
Sachin Kamat authored
exynos_dpi_of_find_panel_node is local to this file. Signed-off-by: -
Jean Delvare authored
The following configuration options combination: CONFIG_DRM_EXYNOS_DP=y CONFIG_DRM_PTN3460=m currently leads to the following linker failure: drivers/built-in.o: In function `exynos_drm_attach_lcd_bridge': .../drivers/gpu/drm/exynos/exynos_dp_core.c:1004: undefined reference to `ptn3460_init' This is because ptn3460_init can't be implemented in a module while its caller is built into the kernel. So add the proper dependency in Kconfig so that the above can't happen. I moved DRM_PTN3460 earlier in Kconfig, next to the I2C helper module section, so that the user has a chance to select it before moving to the Exynos-specific section. IMHO the proper way to solve the problem would be to turn ptn3460 into a clean I2C driver, similar to the other I2C helper chip drivers. It's the only way to not sink into impossible-to-guess dependencies. Then ptn3460 could even be moved together with the other I2C helper chip drivers. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Reviewed-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Rahul Sharma authored
In case of exynos, setting dma-burst to 16Word causes permanent tearing for very small buffers, e.g. cursor buffer. Burst Mode switching, which is based on overlay size is not recommended as overlay size varies a lot towards the end of the screen. This causes unstable DMA which results into tearing again. Rendering small buffers with lower burst size doesn't cause any noticable performance overhead. 128 pixel width is selected based on mulitple experiments with exynos5 SoCs. Signed-off-by:
Prathyush K <prathyush.k@samsung.com> Signed-off-by:
-
Rahul Sharma authored
Exynos drm hdmi driver used to get dummy hdmiphy clock to control the PMU bit for hdmiphy. This bit needs to be set before setting any resolution to hdmi hardware. This was handled using dummy hdmiphy clock which is removed here. PMU is already defined as system controller for exynos SoCs. Hdmi driver is modified to control the phy enable bit inside PMU using regmap interfaces. Devicetree binding document for hdmi is also updated. Signed-off-by:
-
Rahul Sharma authored
Allow to allocate non-contigous buffers when iommu is enabled. Currently, it tries to allocates contigous buffer which consistently fail for large buffers and then fall back to non contigous. Apart from being slow, this implementation is also very noisy and fills the screen with alloc fail logs. Signed-off-by:
-
Inki Dae authored
This patch considers legacy dt binding, and resolves the issue that the use of existing dtb is broken. To resove the dt broken issue, this path tries to get legacy dt nodes from existing dtb directly prior to getting new dt nodes. Signed-off-by:
-
Shirish S authored
In DVI mode the video preamble and Guard band should be disabled whereas it should be applied in HDMI mode, the re-applying of preamble and guard band was missing, which resulted in display failures when switched to HDMI mode from DVI mode. This patch ensures the setting is applied in HDMI mode. Signed-off-by:
Shirish S <s.shirish@samsung.com> Signed-off-by:
-
Seung-Woo Kim authored
The i2c drivers for ddc and hdmiphy are already removed from build and instead, i2c clients registered via devicetree are used. So this patch removes the unnecessary i2c drivers. Signed-off-by:
-
Rahul Sharma authored
Enable support for hdmi for exynos5420 hdmiphy. Add compatible string in the of_match table. Also added hdmiphy configuration values for exynos5420. Signed-off-by:
-
Rahul Sharma authored
Previous SoCs have hdmi phys which are accessible through dedicated i2c lines. Newer SoCs have Apb mapped hdmi phys. Hdmi driver is modified to support apb mapped phys. Signed-off-by:
-
Rahul Sharma authored
Cleaning up unnecessary i2c read call after hdmiphy configuration. This check is redundant since check for hdmiphy pll lock status confirms the correct settings for phy. Signed-off-by:
Daniel Kurtz <djkurtz@chromium.org> Reviewed-by:
Tomasz Figa <t.figa@samsung.com> Signed-off-by:
-
Rahul Sharma authored
Before setting the core and timing generation registers, hdmi driver resets the whole hdmi hardware, which also resets the audio related registers. Hdmi reset is replaced by hdmi disable which is called just before setting the core and timing registers. It also ensure that audio settings are not changed. Signed-off-by:
-
Sean Paul authored
This patch adds a gpio read of hpd during the is_connected callback. This fixes the case where hdmi is off going into suspend and the cable is plugged in while suspended. In this case, the hpd interrupt does not fire and is_connected will return false. Signed-off-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
-
Daniel Kurtz authored
Our resources were just zalloc'ed as part of hdata. They are already 0. Signed-off-by:
-
Paul Taysom authored
Smatch error from arm build: drivers/gpu/drm/exynos/ exynos_hdmi.c:2374 hdmi_probe() error: potential NULL dereference 'hdata->hdmiphy_port'. Added check for hdata->hdmiphy_port that it is not NULL. Signed-off-by:
Paul Taysom <taysom@chromium.org> Signed-off-by:
-
Sean Paul authored
This patch debounces hotplug interrupts generated by the HDMI hotplug gpio. The reason this is needed is that we get multiple (5) interrupts every time a monitor is inserted which causes us to needlessly enable and disable the IP block. Signed-off-by:
-
Sean Paul authored
This patch removes the hdmiphy reset in hdmi_poweroff. The hdmiphy reset was added to take advantage of exynos clockgating, doing it would gate the entire TV domain. Unfortunately, mixer is included in the TV domain and its vsync interrupts are stopped when TV is gated. Signed-off-by:
-
Takashi Iwai authored
The recent commit [3ea87855: drm/helper: lock all around force mode restore] introduced drm_modeset_lock_all() in drm_helper_resume_force_mode() itself, while exynos driver takes this lock before calling it. Move the function call outside the lock for avoiding a deadlock. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Jingoo Han authored
Use DPCD defines of drm_dp_helper.h; thus, duplicated DPCD defines of exynos_dp_core.h can be removed. Also, DP_TEST_EDID_CHECKSUM define is added to drm_dp_helper.h. There is no functional change. Signed-off-by:
-
Shirish S authored
This patch updates phy settings of the below mentioned pixel clocks in Exynos5250 and removes support for 88.75MHz, for it is not supported. 71 MHz - 1280x800@60Hz RB 73.25 MHz - 800x600@120Hz RB 115.5 MHz - 1024x768@120Hz RB 119 MHz - 1680x1050@60Hz RB Signed-off-by:
-
