- 08 May, 2007 40 commits
-
-
Milind Arun Choudhary authored
SPIN_LOCK_UNLOCKED cleanup,use __SPIN_LOCK_UNLOCKED instead Signed-off-by:
Milind Arun Choudhary <milindchoudhary@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Milind Arun Choudhary authored
SPIN_LOCK_UNLOCKED cleanup,use __SPIN_LOCK_UNLOCKED instead Signed-off-by:
-
Milind Arun Choudhary authored
SPIN_LOCK_UNLOCKED cleanup,use __SPIN_LOCK_UNLOCKED instead Signed-off-by:
-
Stephen M. Cameron authored
Document how to detect drive failures for cciss Signed-off-by:
Stephen M. Cameron <steve.cameron@hp.com> Signed-off-by:
-
Thomas Gleixner authored
While the !highres/!dyntick code assigns the duty of the do_timer() call to one specific CPU, this was dropped in the highres/dyntick part during development. Steven Rostedt discovered the xtime lock contention on highres/dyntick due to several CPUs trying to update jiffies. Add the single CPU assignement back. In the dyntick case this needs to be handled carefully, as the CPU which has the do_timer() duty must drop the assignement and let it be grabbed by another CPU, which is active. Otherwise the do_timer() calls would not happen during the long sleep. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Acked-by:
Mark Lord <mlord@pobox.com> Cc: <stable@kernel.org> Signed-off-by:
-
Stephen Cameron authored
Make cciss unconditionally include scsi/scsi.h, because of the use of SCSI_IOCTL_GET_IDLUN and SCSI_IOCTL_GET_BUS_NUMBER. Signed-off-by:
-
Alan Cox authored
HZ has not always been 100Hz for some time. Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
Bjorn Helgaas authored
We used to warn unless the EFI system table major revision was exactly 1. But EFI 2.00 firmware is starting to appear, and the 2.00 changes don't affect anything in Linux. Signed-off-by:
Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Andi Kleen <ak@suse.de> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by:
-
Andi Kleen authored
Simple driver that blinks the keyboard LEDs when loaded. Useful for checking that the kernel is still alive or for crashdumping Signed-off-by:
Andi Kleen <ak@suse.de> Signed-off-by:
-
Miguel Ojeda authored
CREDITS: - Summarize 3 lines into one. - Add webpage. MAINTAINERS: - Add auxdisplay drivers/tree webpages. Signed-off-by:
Miguel Ojeda Sandonis <maxextreme@gmail.com> Signed-off-by:
-
Randy Dunlap authored
Johannes Berg reported that struct names are not highlighted (bold, italic, etc.) in html kernel-doc output. (Also not in text-mode output, but I don't see that changing.) This patch adds the following: - highlight struct names in html output mode - highlight environment var. names in html output mode - indent struct fields in the original struct layout Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Jeffrey Layton authored
A while back, Christoph mentioned that he thought that iunique ought to be cleaned up to use a more conventional loop construct. This patch does that, turning the strange goto loop into a do/while. Signed-off-by:
Jeff Layton <jlayton@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
-
John Johansen authored
notify_change() already calls security_inode_setattr() before calling iop->setattr. Alan sayeth This is a behaviour change on all of these and limits some behaviour of existing established security modules When inode_change_ok is called it has side effects. This includes clearing the SGID bit on attribute changes caused by chmod. If you make this change the results of some rulesets may be different before or after the change is made. I'm not saying the change is wrong but it does change behaviour so that needs looking at closely (ditto all other attribute twiddles) Signed-off-by:
Steve Beattie <sbeattie@suse.de> Signed-off-by:
Andreas Gruenbacher <agruen@suse.de> Signed-off-by:
John Johansen <jjohansen@suse.de> Acked-by:
Stephen Smalley <sds@tycho.nsa.gov> Cc: James Morris <jmorris@namei.org> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
-
John Johansen authored
notify_change() already calls security_inode_setattr() before calling iop->setattr. Signed-off-by:
Tony Jones <tonyj@suse.de> Signed-off-by:
-
David Brownell authored
We've had various reports of some legacy "probe the hardware" style platform drivers having nasty problems with hotplug support. The core issue is that those legacy drivers don't fully conform to the driver model. They assume a role that should be the responsibility of infrastructure code: creating device nodes. The "modprobe" step in hotplugging relies on drivers to have split those roles into different modules. The lack of this split causes the problems. When a driver creates nodes for devices that don't exist (sending a hotplug event), then exits (aborting one modprobe) before the "modprobe $MODALIAS" step completes (by failing, since it's in the middle of a modprobe), the result can be an endless loop of modprobe invocations ... badness. This fix uses the newish per-device flag controlling issuance of "add" events. (A previous version of this patch used a per-device "driver can hotplug" flag, which only scrubbed $MODALIAS from the environment rather than suppressing the entire hotplug event.) It also shrinks that flag to one bit, saving a word in "struct device". So the net of this patch is removing some nasty failures with legacy drivers, while retaining hotplug capability for the majority of platform drivers. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Cc: Greg KH <gregkh@suse.de> Cc: Andres Salomon <dilinger@debian.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by:
-
Borislav Petkov authored
A patch for kernel-doc that enables the generation of a global, TOC-like index.html page after building 'htmldocs' Signed-off-by:
Borislav Petkov <bbpetkov@yahoo.de> Acked-by:
-
Mike Miller (OS Dev) authored
Set rq->errors more correctly in cciss driver. Previously we had set it synonymously with the meaning of the last parameter of end_that_last_request and complete_buffers (the "uptodate" parameter) and had gotten away with it for all this time because nobody ever looked at rq->errors. SCSI_IOCTL_SEND_COMMAND looks at rq->errors, so now it matters that it be right. Signed-off-by:
Mike Miller <mike.miller@hp.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by:
-
Mike Miller (OS Dev) authored
For all of you that think cciss should be a scsi driver here is the patch that you have been waiting for all these years. This patch actually adds the SG_IO ioctl to cciss. The primary purpose is for clustering and high-availibilty. But now anyone can exploit this ioctl in any manner they wish. Note, SCSI_IOCTL_SEND_COMMAND doesn't work with this patch due to rq->errors being set incorrectly. Subsequent patch fixes that. Signed-off-by:
-
Mike Miller (OS Dev) authored
Reformat some error handling code to reduce line lengths a bit. Signed-off-by:
-
Martin Peschke authored
We can save some lines of code by using seq_release_private(). Signed-off-by:
Martin Peschke <mp3@de.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Martin Peschke authored
We can save some lines of code by using seq_release_private(). Signed-off-by:
-
Christoph Hellwig authored
Merge all compat ioctl handling into compat_ioctl.c instead of splitting it over compat.c and compat_ioctl.c. This also allows to get rid of ioctl32.h Signed-off-by:
Christoph Hellwig <hch@lst.de> Looks-good-to: Andi Kleen <ak@suse.de> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Robert P. J. Day authored
Following the programming advice laid down in the gcc manual, make sure the case "..." operator has spaces on either side. According to: http://gcc.gnu.org/onlinedocs/gcc-4.1.2/gcc/Case-Ranges.html#Case-Ranges: "Be careful: Write spaces around the ..., for otherwise it may be parsed wrong when you use it with integer values." Signed-off-by:
Robert P. J. Day <rpjday@mindspring.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Akinobu Mita authored
This patch fixes two things in module_init. - fix register_chrdev() error check Currently dtlk doesn't check register_chrdev() failure correctly. register_chrdev() returns a errno on failure. - check probe failure dtlk ignores probe failure and allows the module loading without such device. I got "Trying to free nonexistent resource" message by release_region() when unloading module without device. [akpm@linux-foundation.org: fix error code return] Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Cc: Chris Pallotta <chris@allmedia.com> Cc: Jim Van Zandt <jrv@vanzandt.mv.com> Signed-off-by:
-
Philippe De Muyter authored
Add support for the Motorola sysv68 disk partition (slices in motorola doc). Signed-off-by:
Philippe De Muyter <phdm@macqel.be> Signed-off-by:
-
Ravikiran G Thirumalai authored
We noticed a drop in n/w performance due to the irq_desc being cacheline aligned rather than internode aligned. We see 50% of expected performance when two e1000 nics local to two different nodes have consecutive irq descriptors allocated, due to false sharing. Note that this patch does away with cacheline padding for the UP case, as it does not seem useful for UP configurations. Signed-off-by:
Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by:
Shai Fultheim <shai@scalex86.org> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Pavel Emelianov authored
This causes constructions like down_write(&mm1->mmap_sem); if (down_write_trylock(&mm2->mmap_sem)) { ... up_write(&mm2->mmap_sem); } up_write(&mm1->mmap_sem); generate a lockdep warning about circular locking dependence. Call rwsem_acquire() with trylock set to 1. Cc: Ingo Molnar <mingo@elte.hu> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: -
Christoph Hellwig authored
Now that there is no arch-specific compat ioctl handling left there is not point in having a separate copat_ioctl.h, so merge it into compat_ioctl.c Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Borislav Petkov authored
In a different approach here's a patch that handles the special case of composite arithmetic expressions in array size initializers. With it, prior to pushing the split strings on the @first_arg array, I split the keywords before the array name as before and then keep the array name along with the subscript expression as a single whole element which gets pushed last. In this manner, kernel-doc produces correct output without removing whitespaces which makes the array subscripts unreadable in the docs. Signed-off-by:
-
Milind Arun Choudhary authored
ROUND_UP macro cleanup use ALIGN Signed-off-by:
-
Milind Arun Choudhary authored
ROUND_UP macro cleanup use,ALIGN or DIV_ROUND_UP where ever appropriate. Signed-off-by:
-
Randy Dunlap authored
drivers/parport/parport_serial.c:402: warning: ignoring return value of 'pci_enable_device', declared with attribute warn_unused_result Signed-off-by:
-
Alexey Dobriyan authored
linux/module.h -> linux/elf.h -> asm-i386/elf.h -> linux/utsname.h -> linux/sched.h Noticeably cut the number of files which are rebuild upon touching sched.h and cut down pulled junk from every module.h inclusion. Signed-off-by:Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Milind Arun Choudhary authored
ROUND_UP macro cleanup use DIV_ROUND_UP Signed-off-by:
-
Thomas Gleixner authored
The deprecation of the SA_xxx interrupt flags did not emit deprecated warnings. Andrew said about the removal of the deprecated flag defines: > This is going to break a lot of external stuff. We should have found > a way to make usage of SA_* emit deprecated warnings (or _some_ > warning) to warn people of impending doom. But I can't immediately > find a way of doing that. if we _can_ find a way of doing this, I > suspect we'll need to do it, and give people another six months. It's > going to get ugly out there. We shall see... Define the deprecated flags as a call to a __deprecated inline function so a warning is emitted on compile time. Extend the reprieve of out of tree drivers to 9/2007. Signed-off-by:
-
Thomas Gleixner authored
Fix the last users of the deprecated SA_xxx interrupt flags. Signed-off-by:
-
Bert Wesarg authored
This fixes the comment for the function param_array. Which lies that it only *temporarily* mangle the input string @val. Signed-off-by:
Bert Wesarg <wesarg@informatik.uni-halle.de> Signed-off-by:
-
Alexey Dobriyan authored
Same story as with cat /proc/*/wchan race vs rmmod race, only /proc/slab_allocators want more info than just symbol name. Signed-off-by:
Alexey Dobriyan <adobriyan@sw.ru> Acked-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Alexey Dobriyan authored
kallsyms_lookup() can go iterating over modules list unprotected which is OK for emergency situations (oops), but not OK for regular stuff like /proc/*/wchan. Introduce lookup_symbol_name()/lookup_module_symbol_name() which copy symbol name into caller-supplied buffer or return -ERANGE. All copying is done with module_mutex held, so... Signed-off-by:
-
Alexey Dobriyan authored
Several kallsyms_lookup() pass dummy arguments but only need, say, module's name. Make kallsyms_lookup() accept NULLs where possible. Also, makes picture clearer about what interfaces are needed for all symbol resolving business. Signed-off-by:
-
