into home.transmeta.com:/home/torvalds/v2.5/linux

- switch to using scsi_ioctl() for drive door locking and unlocking
  instead of private code
- use a driver internal flag to save the reset status until tape is
  positioned into known location
- set driver state properly for all partitions after reset
- change put_device() to driver_unregister() in st_detach()
- C99 initializer changes (from Art Haas)

into home.transmeta.com:/home/torvalds/v2.5/linux

This is my current futex patchset against BK-curr.  It mostly includes
must-have crash/correctness fixes from Martin Wirth, tested and reworked
somewhat by myself:

 - crash fix: futex_close did not detach from the vcache. Detach cleanups.
   (Martin Wirth)

 - memory leak fix: forgotten put_page() in a rare path in __pin_page().
   (Martin Wirth)

 - crash fix: do not do any quickcheck in unqueue_me(). (Martin, me)

 - correctness fix: the fastpath in __pin_page() now handles reserved
   pages the same way get_user_pages() does. (Martin Wirth)

 - queueing improvement: __attach_vcache() now uses list_add_tail() to
   avoid the reversal of the futex queue if a COW happens. (Martin Wirth)

 - simplified alignment check in sys_futex. (Martin Wirth)

 - comment fix: make it clear how the vcache hash quickcheck works. (me)

Make dcookies use a stable size regardless of whether we're
on a 32-bit or 64-bit platform.

Finally, add the i386 timer-interrupt and perfctr drivers for i386

Add the oprofile core.  The core design is very similar to that we
discussed in private mail.  The nasty details should be documented in
the patch below.

Add the MSR defines oprofile uses

This provides a simple api to let oprofile hook into the NMI interrupt
for the perfctr profiler.

This implements a simple hook into the profiling timer for x86 so that
non-perfctr machines can still use oprofile.  This has proven useful for
laptops and the like.

It also reduces header dependencies a bit by centralising readprofile
code

This implements the persistent path-to-dcookies mapping, and adds a
system call for the user-space profiler to look up the profile data, so
it can tag profiles to specific binaries.

This implements the simple hooks we need to catch unmappings, and to
make sure no stale task_struct*'s are ever used by the main oprofile
core mechanism.  If disabled, it compiles to nothing.

Quite a few drivers don't need ->open() anymore - all it did was checking
that minor is good (== gendisk exists).  That is handled by generic code
now...

There we go - now we can put a reference to gendisk into block_device.  Which
we do in do_open().  Most of the callers of get_gendisk() are simply using
bdev->bd_disk now (and most of the put_disk() calls introduced on previous
step disappear).  We also put that pointer into struct request - ->rq_disk.
That allows to get rid of disk_index() kludges in md.c (we simply count
relevant IO in the struct gendisk fields) and kill the export of get_gendisk().
	Notice that by now we can move _all_ IO counters into gendisk.  That
will kill a bunch of per-major arrays and more importantly, allow to merge
sard in clean way.  FWIW, we probably could show them as disk/partitions
attributes in driverfs...

Finally.  We use disk->dev.refcount as a gendisk refcount.  New helper -
get_disk(): atomic_inc on refcount.  get_gendisk() does it on return,
callers of get_gendisk() do put_disk() when they are done.

	* disk->disk_dev is initialized in alloc_disk(), device_add()'d in
	  add_disk(), device_del()'d in unregister_disk() and device_put() in
	  put_disk().
	* devices of partitions are made its children.
	* attributes of disk one: dev (dev_t of the thing), range (number of
	  minors) and size (in sectors).
	* attributes of partition ones: dev (ditto), start (in sectors) and
	  size (in sectors).
	* disk devices are put on a new bus - "block"
	* if caller of add_disk() had set disk->driverfs_dev, we set symlinks:
	  "device" from disk to underlying device and "block" from underlying
	  device to disk.
	* ->release() of disk_dev frees disk and disk->part.
	At that point we have sane driverfs subtree for each gendisk and
refcount of its root (disk->disk_dev) can act as gendisk refcount.

	* update_partition() split into add_partition() and delete_partition().
	* all updating of ->part[] is switched to these two (including initial
filling/final cleaning).
	* per-partition devices are allocated on-demand and never reused.
We allocate struct device in add_partition() and put reference to it into
hd_struct.  ->release() for that struct device frees it.  delete_partition()
removes reference from hd_struct and does put_device() on it.  Basically,
we get rid of problems with reused struct device by never reusing them...
	At that point devices for partitions are nice and sane.

	guts of blkpg.c and blkdev_ioctl() sanitized up and moved into a new
file - drivers/block/ioctl.c.  blkpg.c is gone.

	new driverfs helpers - device_initialize/device_add and device_del.
The latter is device_unregister() sans the final put_device().  The former
is splitup of device_register() into initialization and insertion into tree.

	new field - disk->minors (1 << disk->minor_shift).  Almost all uses
of ->minor_shift had that form and thus had been replaced.

allocation of ->part[] moved to alloc_disk(); alloc_disk() got an
argument (number of minors expected).  Freeing is in put_disk().

into home.transmeta.com:/home/torvalds/v2.5/linux

arch and os Makefiles.

the native "struct request" fields instead.
    
Simplify and clean up sense data handling.

This makes IDE CD-RW burning possible without ide-scsi.c

Rename old "block_ioctl()" function: it's "scsi_cmd_ioctl()", as that
is what the function does. Rename the whole file "scsi_ioctl.c"

into shaggy.austin.ibm.com:/shaggy/bk/jfs-2.5

Some of them were named like BT_XXX and bt_xxx others BLUEZ_XXX and bluez_xxx.
From now on use BT_XXX and bt_xxx throughout Bluetooth code, including CONFIG_ defines.
Clean up small typos and misspelling along the way.

we can rename bluez.o to what it should have been from the begging 
bluetoth.o

The tempfile code is in its own file.
A bunch of unused stuff is now gone.
A bunch of code that could be called from the tracing thread was
made safe for that to happen.

into home.transmeta.com:/home/torvalds/v2.5/linux

This patch from Christoph Hellwig removes the kiobuf/kiovec
infrastructure.

This affects three subsystems:

video-buf.c:

   This patch includes an earlier diff from Gerd which converts
    video-buf.c to use get_user_pages() directly.

   Gerd has acked this patch.

LVM1:

   Is now even more broken.

drivers/mtd/devices/blkmtd.c:

   blkmtd is broken by this change.  I contacted Simon Evans, who
   said "I had done a rewrite of blkmtd anyway and just need to convert
   it to BIO.  Feel free to break it in the 2.5 tree, it will force me
   to finish my code."

Neither EVMS nor LVM2 use kiobufs.  The only remaining breakage
of which I am aware is a proprietary MPEG2 streaming module.  It
could use get_user_pages().

From Anton Blanchard.  This fixes a couple of Linux Test Project
failures.

- Returns EBUSY if the caller is trying to invalidate memory which is
  covered by a locked vma.

  The open group say:

  [EBUSY]
          Some or all of the addresses in the range starting
          at addr and continuing for len bytes are locked,
          and MS_INVALIDATE is specified.

- Returns EINVAL if the caller specified both MS_SYNC and MS_ASYNC

  [EINVAL]
          The value of flags is invalid.

  and:

          "Either MS_ASYNC or MS_SYNC is specified, but not both."