According to the programming guide, it is recommended to
perform a GCTL_CORE_SOFTRESET only when switching the mode
from device to host or host to device. However, it is found
that during bootup when __dwc3_set_mode() is called for the
first time, GCTL_CORESOFTRESET is done with suspendable bit(BIT 17)
of DWC3_GUSB3PIPECTL set. This some times leads to issues
like controller going into bad state and controller registers
reading value zero. Until GCTL_CORESOFTRESET is done and
run/stop bit is set core initialization is not complete.
Setting suspendable bit of DWC3_GUSB3PIPECTL and then
performing GCTL_CORESOFTRESET is therefore not recommended.
Avoid this by only performing the reset if current_dr_role is set,
that is, when doing subsequent role switching.

Fixes: f88359e1 ("usb: dwc3: core: Do core softreset when switch mode")
Signed-off-by: Rohith Kollalsi <quic_rkollals@quicinc.com>
Link: https://lore.kernel.org/r/20220714045625.20377-1-quic_rkollals@quicinc.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We should call of_node_put() for the reference returned by
of_get_child_by_name() which has increased the refcount.

Fixes: 30d2617f ("usb: gadget: aspeed: allow to set usb strings in device tree")
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220713120528.368168-1-windhl@126.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the following coccicheck warning:

drivers/usb/misc/ldusb.c:719: WARNING opportunity for max().
drivers/usb/misc/ldusb.c:721: WARNING opportunity for max().

max_t() macro is defined in include/linux/minmax.h. It avoids
multiple evaluations of the arguments when non-constant and performs
strict type-checking.
Signed-off-by: Jiangshan Yi <yijiangshan@kylinos.cn>
Link: https://lore.kernel.org/r/20220713070205.3047256-1-13667453960@163.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

During a 3 stage SETUP transfer, if the host sends another SETUP token
before completing the status phase, it signifies that the host has aborted
the current control transfer.  Currently, if a setup_packet_pending is
received, there are no subsequent calls to dwc3_ep0_out_start() to fetch
the new SETUP packet.  This leads to a stall on EP0, as host does not
expect another STATUS phase as it has aborted the current transfer.

Fix this issue by explicitly stalling and restarting EP0, as well as
resetting the trb_enqueue indexes.  (without this, there is a chance the
SETUP TRB is set up on trb_endqueue == 1)
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Link: https://lore.kernel.org/r/20220712014403.2977-1-quic_wcheng@quicinc.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When building with 'W=1' the compiler complains about missing
prototypes for onboard_hub_create/destroy_pdevs(). Include the
header with the prototypes to fix this.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20220711092431.1.I4016c759fd7fe2b32dd482994a20661f36e2cae3@changeidSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit ebc4969a. That
commit was supposed to make the binding better reflect the MediaTek XHCI
hardware block by requiring all clocks to be present. But doing that
also causes too much noise in the devicetrees, since it requires
updating old MediaTek DTs to add clock handles for the fixed clocks, and
going forward every new clock added to the binding would require even
more updates.

The commit also didn't update the example to match the changes, causing
additional warnings.

Instead let's keep the clocks optional so that old devicetrees can keep
omitting the fixed clocks, and we'll just add the clocks as required on
new DTs.

Fixes: ebc4969a ("dt-bindings: usb: mtk-xhci: Make all clocks required")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220708192605.43351-1-nfraprado@collabora.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It allows to reset prevent_medium_removal flag and "eject" the image.
This can be useful to free the drive from a hunging host or if the host
continues to use the drive even after unmounting (Linux does this).
It's also a bit like using an unfolded paperclip on an optical drive.

Previously, the undocumented method of sending SIGUSR1 to a special
"file-storage" kernel thread could be used for these purposes,
but when using multiple storages there was no way to distinguish
one from the other, so we had to send a signal to everyone.
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Maxim Devaev <mdevaev@gmail.com>
Link: https://lore.kernel.org/r/20220711102956.19642-1-mdevaev@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB_AMD5536UDC should depend on HAS_DMA since it selects USB_SNP_CORE,
which depends on HAS_DMA and since 'select' does not follow any
dependency chains.

Fixes this kconfig warning:

WARNING: unmet direct dependencies detected for USB_SNP_CORE
  Depends on [n]: USB_SUPPORT [=y] && USB_GADGET [=y] && (USB_AMD5536UDC [=y] || USB_SNP_UDC_PLAT [=n]) && HAS_DMA [=n]
  Selected by [y]:
  - USB_AMD5536UDC [=y] && USB_SUPPORT [=y] && USB_GADGET [=y] && USB_PCI [=y]

Fixes: 97b3ffa2 ("usb: gadget: udc: amd5536: split core and PCI layer")
Cc: Raviteja Garimella <raviteja.garimella@broadcom.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: linux-usb@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20220709013601.7536-1-rdunlap@infradead.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For High-Speed Transfers the prepare_one_trb function is calculating the
multiplier setting for the trb based on the length parameter of the trb
currently prepared. This assumption is wrong. For trbs with a sg list,
the length of the actual request has to be taken instead.

Fixes: 40d829fb ("usb: dwc3: gadget: Correct ISOC DATA PIDs for short packets")
Cc: stable <stable@kernel.org>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20220704141812.1532306-3-m.grzeschik@pengutronix.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The function __dwc3_prepare_one_trb has many parameters. Since it is
only used in dwc3_prepare_one_trb there is no point in keeping the
function. We merge both functions and get rid of the big list of
parameters.

Fixes: 40d829fb ("usb: dwc3: gadget: Correct ISOC DATA PIDs for short packets")
Cc: stable <stable@kernel.org>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20220704141812.1532306-2-m.grzeschik@pengutronix.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add the ability to detect and print the USB speed as "super-plus" if/when
the kernel reports that speed.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20220708115859.2095714-4-bryan.odonoghue@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add the ability to detect and print the USB speed as "super" if/when the
kernel reports that speed.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20220708115859.2095714-3-bryan.odonoghue@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add the ability to detect and print the USB speed as "wireless" if/when the
kernel reports that speed.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20220708115859.2095714-2-bryan.odonoghue@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Call onboard_hub_create/destroy_pdevs() from hub_probe/disconnect()
to create/destroy platform devices for onboard USB hubs that may be
connected to the hub. The onboard hubs must have nodes in the
device tree.

onboard_hub_create/destroy_pdevs() are NOPs unless
CONFIG_USB_ONBOARD_HUB=y/m.

Also add a field to struct usb_hub to keep track of the onboard hub
platform devices that are owned by the hub.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20220630123445.v24.4.Ic9dd36078f9d803de82ca01a6700c58b8e4de27e@changeidSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The main issue this driver addresses is that a USB hub needs to be
powered before it can be discovered. For discrete onboard hubs (an
example for such a hub is the Realtek RTS5411) this is often solved
by supplying the hub with an 'always-on' regulator, which is kind
of a hack. Some onboard hubs may require further initialization
steps, like changing the state of a GPIO or enabling a clock, which
requires even more hacks. This driver creates a platform device
representing the hub which performs the necessary initialization.
Currently it only supports switching on a single regulator, support
for multiple regulators or other actions can be added as needed.
Different initialization sequences can be supported based on the
compatible string.

Besides performing the initialization the driver can be configured
to power the hub off during system suspend. This can help to extend
battery life on battery powered devices which have no requirements
to keep the hub powered during suspend. The driver can also be
configured to leave the hub powered when a wakeup capable USB device
is connected when suspending, and power it off otherwise.

Technically the driver consists of two drivers, the platform driver
described above and a very thin USB driver that subclasses the
generic driver. The purpose of this driver is to provide the platform
driver with the USB devices corresponding to the hub(s) (a hub
controller may provide multiple 'logical' hubs, e.g. one to support
USB 2.0 and another for USB 3.x).
Co-developed-by: Ravi Chandra Sadineni <ravisadineni@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Ravi Chandra Sadineni <ravisadineni@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20220630123445.v24.3.I7c9a1f1d6ced41dd8310e8a03da666a32364e790@changeidSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In the context of USB the term 'companion-hub' is misleading, change the
name of the property to 'peer-hub'.

There are no upstream users of the 'companion-hub' property, neither in
the device tree, nor on the driver side, so renaming it shouldn't cause
any compatibility issues with existing device trees.

Changes in v24:
- patch added to the series
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20220630123445.v24.2.Ie2bbbd3f690826404b8f1059d24edcab33ed898f@changeidSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Code for platform_device_create() and of_platform_device_destroy() is
only generated if CONFIG_OF_ADDRESS=y. Add stubs to avoid unresolved
symbols when CONFIG_OF_ADDRESS is not set.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20220630123445.v24.1.I08fd2e1c775af04f663730e9fb4d00e6bbb38541@changeidSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add function wake notification to support function remote wakeup,
currently assume the composite device only enable function wake
for the first interface.

Forward request to function driver when the recipient is an interface,
including:
GetStatus() request to the first interface in a function returns the
information about 'function remote wakeup' and 'function remote wakeup
capalbe';
SetFeature request of FUNCTION_SUSPEND to an interface recipient, the
controller driver saves the suspend option;
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20220708071903.25752-5-chunfeng.yun@mediatek.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It is capable of supporting usb3 dual role if there is at least one
usb3 port for device and xhci controller, we can check it from the
controller's capability, so no need the property "mediatek,usb3-drd"
anymore, but I find the property is not decribed in dt-binding.
Meanwhile, also take into account if the u3 port is disabled when the
u3 phy is shared with pcie.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20220708071903.25752-4-chunfeng.yun@mediatek.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We may want to disable device's usb3 port when the combo phy is switched
from usb3 mode to pcie mode for some projects.
Meanwhile rename member @is_u3_ip to @u3_capable to avoid misleading, due
to the member's value may be changed when disable usb3 port, but the
controller is still a usb3 IP which also tells us how to manage the fifo.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20220708071903.25752-3-chunfeng.yun@mediatek.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Print endpoint type as string instead of decimal value to make
the log more readable.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20220708071903.25752-2-chunfeng.yun@mediatek.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB PD controllers which consisting of a microcontroller (acting as the TCPM)
and a port controller (TCPC) - may require that the driver for the PD
controller accesses directly also the on-chip port controller in some cases.

Move tcpci.h to include/linux/usb/ is convenience access TCPC registers.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Xin Ji <xji@analogixsemi.com>

Link: https://lore.kernel.org/r/20220706083433.2415524-1-xji@analogixsemi.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

after usb_ep_queue() if wait_for_completion_interruptible() is
interrupted we need to wait until IRQ gets finished.

Otherwise complete() from epio_complete() can corrupt stack.
Signed-off-by: Jozef Martiniak <jomajm@gmail.com>
Link: https://lore.kernel.org/r/20220708070645.6130-1-jomajm@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add compatible for mt8188
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20220707015041.12264-1-chunfeng.yun@mediatek.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The driver won't probe on a LAN9668 because the pinctrl driver isn't
ready yet. Probe deferral is not supported because the init section
is already discarded. With fw_devlink enabled, the probe won't even
be called. Convert the driver to a proper platform driver.
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220705131951.1388968-2-michael@walle.ccSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

devm_gpiod_get_optional() might still return an error code, esp.
EPROBE_DEFER. Return any errors.
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220705131951.1388968-1-michael@walle.ccSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The event classes udc_log_ep and udc_log_req both declare:

    __dynamic_array(char, name, UDC_TRACE_STR_MAX)

Which will reserve UDC_TRACE_STR_MAX bytes on the ring buffer for the
event to write in name. It then uses snprintf() to write into that space.

Assuming that the string being copied is nul terminated, it is better to
just use the __string() helper. That way only the size of the string is
saved into the ring buffer and not the max size (yes, the entire
UDC_TRACE_STR_MAX is used in the trace event, and anything not used is
just junk in the ring buffer). Worse, there's also meta data saved into
the event that denotes where the string is stored in the event and also
saves its size, which is always going to be UDC_TRACE_STR_MAX.

Convert both to use the __string() and __assign_str() helpers that are for
this kind of use case.

Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20220703091449.317f94b1@rorschach.local.homeSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The USB device controller available in the Microchip LAN9662 SOC
is the same IP as the one present in the SAMA5D3 SOC.

Add the LAN9662 compatible string and set the SAMA5D3 compatible
string as a fallback for the LAN9662.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220701070928.459135-3-herve.codina@bootlin.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit cbf286e8 ("xhci: fix unsafe memory usage in xhci tracing")
apparently missed one sprintf() call in xhci_decode_trb() -- replace
it with the snprintf() call as well...

Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.

Fixes: cbf286e8 ("xhci: fix unsafe memory usage in xhci tracing")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220630124645.1805902-2-mathias.nyman@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add read TOC with format 1 to support CD-ROM emulation with
Windows OS.
This patch is tested on Windows OS Server 2019.

Fixes: 89ada0fe ("usb: gadget: f_mass_storage: Make CD-ROM emulation work with Mac OS-X")
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
Link: https://lore.kernel.org/r/20220628021436.3252262-1-neal_liu@aspeedtech.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We have a symbolic name for the standard timeout.
Use it. No functional change intended.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20220629132638.31810-1-oneukum@suse.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clock source is prepared and enabled by clk_prepare_enable()
in probe function, but no disable or unprepare in remove.

Fixes: 7a96b6ea ("usb: musb: Add support for PolarFire SoC's musb controller")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220628140527.1404439-1-yangyingliang@huawei.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The bug is that we should still enter this loop if "tx_len" is zero.

After adding the "last" variable, then the "chunk >= 0" condition is no
longer required but I left it for readability.

Fixes: c09b1f37 ("usb: gadget: aspeed_udc: cleanup loop in ast_dma_descriptor_setup()")
Reported-by: Neal Liu <neal_liu@aspeedtech.com>
Reviewed-by: Neal Liu <neal_liu@aspeedtech.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/Yrq6F5okoX1y05rT@kiliSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The multiplier parameter of dwc3_gadget_calc_tx_fifo_size() was
not documented:

	drivers/usb/dwc3/gadget.c:675: warning: Function parameter or member 'mult' not described in 'dwc3_gadget_calc_tx_fifo_size'
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/bd599a18cea45c57d91c69d3e30d8b1e8ea69dd1.1656409369.git.mchehab@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Avoid a kernel-doc warning by documenting it:
	drivers/usb/dwc3/core.h:1328: warning: Function parameter or member 'async_callbacks' not described in 'dwc3'
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/2c3de5935934baec097286f525ce4beff0a31ec0.1656409369.git.mchehab@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Without that, the parameter is not properly parsed:
	include/linux/usb/typec_altmode.h:132: warning: Function parameter or member 'altmode' not described in 'typec_altmode_get_orientation'
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/70dc4c5d744cf1fe9a0efe6b85deaa0489628282.1656409369.git.mchehab@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'thunderbolt-for-v5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next

Mika writes:

thunderbolt: Changes for v5.20 merge window

This includes following Thunderbolt/USB4 changes for the v5.20 merge
window:

  * Enable CL1 low power link state
  * Add support for Intel Raptor Lake Thunderbolt/USB4 controller
  * A couple of typos fixed.

All these have been in linux-next with no reported issues.

* tag 'thunderbolt-for-v5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
  thunderbolt: Fix typo in comment
  thunderbolt: Add support for Intel Raptor Lake
  thunderbolt: Fix some kernel-doc comments
  thunderbolt: Change TMU mode to HiFi uni-directional once DisplayPort tunneled
  thunderbolt: Add CL1 support for USB4 and Titan Ridge routers
  thunderbolt: Change downstream router's TMU rate in both TMU uni/bidir mode
  thunderbolt: Fix typos in CLx enabling
  thunderbolt: CLx disable before system suspend only if previously enabled
  thunderbolt: Silently ignore CLx enabling in case CLx is not supported

All of the clocks listed in the binding are always wired to the XHCI
controller hardware blocks on all SoCs. The reason some clocks were made
optional in the binding was to account for the fact that depending on
the SoC, some of the clocks might be fixed (ie not controlled by
software).

Given that the devicetree should represent the hardware, make all clocks
required in the binding. Subsequent patches will make the DTS changes to
specify fixed-clocks for the clocks that aren't controllable.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220623193702.817996-3-nfraprado@collabora.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add missing "minItems: 1" to the interrupt-names property to allow the
second interrupt-names, "wakeup", to be optional.

Fixes: fe8e4880 ("dt-bindings: usb: mtk-xhci: add wakeup interrupt")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20220623193702.817996-2-nfraprado@collabora.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix up all sysfs show entries to use sysfs_emit
Signed-off-by: Xuezhi Zhang <zhangxuezhi1@coolpad.com>
Link: https://lore.kernel.org/r/20220624121238.134256-1-zhangxuezhi1@coolpad.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>