Remove the compile-time warning for this config option, and instead
warn that it is experimental in the Kconfig text
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-fixes-for-3.10a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

First round of IIO fixes for the 3.10 cycle.

The usual mixed bag of little fixes.

1) A fix for mxs-lradc having missed out on some global abi changes that and
   hence being unable to start up buffered output.
2) Clean up error handling in tsl2x7x
3) A build fix for some of the dac drivers when they have spi master support
   built in, but i2c support build as a module.
4) Add a missing disable after a oneshot capture to the st sensor core.
5) Exynos adc driver took a novel an incorrect route to get at its private
   data store.

The exynos_adc device structure was wrongly extracted from the dev*
correcting the same.

Using the regular conversion of
struct device* -> struct platform_device* -> struct exynos_adc* seems wrong.
Instead we should be doing
struct device* -> struct iio_dev* -> struct exynos_adc*
Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

This patch fixes below build error when CONFIG_SPI_MASTER=y && CONFIG_I2C=m:

drivers/built-in.o: In function `ad5064_i2c_write':
drivers/iio/dac/ad5064.c:608: undefined reference to `i2c_master_send'
drivers/built-in.o: In function `ad5064_i2c_register_driver':
drivers/iio/dac/ad5064.c:646: undefined reference to `i2c_register_driver'
drivers/built-in.o: In function `ad5064_i2c_unregister_driver':
drivers/iio/dac/ad5064.c:651: undefined reference to `i2c_del_driver'
make: *** [vmlinux] Error 1

When CONFIG_I2C=m, meaning we can't build the drivers in with I2C support.
Thus don't allow the drivers to be compiled as built-in when CONFIG_I2C=m.

The real fix though is to break the driver apart into a SPI part, an I2C part
and a common part. But that's something for 3.11 while this is something for
3.10/stable.
Reported-by: Wu Fengguang <fengguang.wu@intel.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Fix to return -EINVAL in the i2c device found error handling
case instead of 0, as done elsewhere in this function.
And also correct the fail1 and fail2 lable to do the right thing.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

This fixes 'preenable failed: -EINVAL' error when using this driver.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Since commit c8801a8e (regulator: core: Mark all get and enable calls as
__must_check) we need to check the value returned by 'regulator_enable()'.

Do this check to get rid of the following build warning:

drivers/staging/imx-drm/imx-tve.c: In function 'imx_tve_probe':
drivers/staging/imx-drm/imx-tve.c:671:19: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result]
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Without this, I get the following problem when building kernel:

drivers/built-in.o: In function `imx_pd_connector_get_modes':
/linux-2.6/drivers/staging/imx-drm/parallel-display.c:78: undefined reference to `of_get_drm_display_mode'
make: *** [vmlinux] Error 1
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add how-to documentation that provides a step-by-step guide
for configuring and trying out a ramster cluster.
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Platform devices added through OF usually do not have any dma_mask
pointer set. If the hardware advertises DMA support, the driver will
expect DMA buffers to be passed in, but the USB core will not do this
due to lack of a dma mask, breaking all connectiviy.

To fix this, set a default dma_mask by pointing it at the
coherent_dma_mask and set their value to a 32 bit mask. This still
allows any platform code to set any more specific mask if needed, but
makes the driver work for most dma-enabled hardware.

It would be great if this patch could be included in 3.10, since it is
needed to make the dwc2 driver work on the ralink rt3052 target.

Before, the plan was to set up the dma mask in MIPS platform code, but
because of a similar change in ehci and the uglyness of the code for
that, the plan for that infrastructure was dropped. This patch makes the
setting of the dma_mask happen in the same way as the patch Stephen
Warren (set device dma_mask without reference to global data).
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes occasional dead lock on power up / down.

spin_lock_irq is used because of unlocking with spin_unlock_irq
elsewhere in the driver.

Only relevant to kernels 3.8 and later when command was
transferred to the iw_handler.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Cc: stable@vger.kernel.org # 3.8+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ZRAM support depends on ZSMALLOC so present ZSMALLOC to the user
first.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use kuid_t instead of uid_t, to pass the UIDGID_STRICT_TYPE_CHECKS.
Signed-off-by: Xiong Zhou <jencce.kernel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/zcache/zcache-main.c: In function ‘__check_disable_cleancache’:
drivers/staging/zcache/zcache-main.c:1928: warning: return from incompatible pointer type
drivers/staging/zcache/zcache-main.c: In function ‘__check_disable_frontswap’:
drivers/staging/zcache/zcache-main.c:1929: warning: return from incompatible pointer type
drivers/staging/zcache/zcache-main.c: In function ‘__check_disable_frontswap_ignore_nonactive’:
drivers/staging/zcache/zcache-main.c:1933: warning: return from incompatible pointer type
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The new SOLO6X10 driver needs the built-in console fonts, specifically
the VGA8x16 font and building it without console support results in
a link error error.

drivers/built-in.o: In function `solo_osd_print':
 :(.text+0x7d3424): undefined reference to `find_font'

This adds a dependency on the CONFIG_FONTS symbol and changes the
console code to always build the base driver even if there are
no specific fonts built-in.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The imx DRM driver needs a couple of extra Kconfig dependencies
to avoid random build failures:

drivers/staging/imx-drm/ipuv3-crtc.c:448:
 undefined reference to `ipu_idmac_put'
 drivers/staging/imx-drm/ipuv3-crtc.c:450: undefined reference to
 `ipu_dmfc_put' drivers/staging/imx-drm/ipuv3-crtc.c:452:
 undefined reference to `ipu_dp_put'
 drivers/staging/imx-drm/ipuv3-crtc.c:454: undefined reference to
 `ipu_di_put'
drivers/built-in.o: In function `ipu_probe':
 :(.text+0x4b4174): undefined reference to `device_reset'
drivers/built-in.o: In function `imx_tve_probe':
 drivers/staging/imx-drm/imx-tve.c:648: undefined reference to
 `devm_regmap_init_mmio_clk'
drivers/built-in.o: In function
 `imx_pd_connector_get_modes':
 drivers/staging/imx-drm/parallel-display.c:78: undefined
 reference to `of_get_drm_display_mode'

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c:
        In function ‘synaptics_rmi4_resume’:
drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c:1090:18:
        warning: ignoring return value of ‘regulator_enable’, declared
        with attribute warn_unused_result [-Wunused-result

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: devel@driverdev.osuosl.org
Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix build errors in staging/sep/ by making DX_SEP depend on
CRYPTO.

drivers/built-in.o: In function `sep_sha1_init':
sep_crypto.c:(.text+0x245ece): undefined reference to `crypto_enqueue_request'
drivers/built-in.o: In function `sep_sha1_update':
sep_crypto.c:(.text+0x245f4f): undefined reference to `crypto_enqueue_request'
drivers/built-in.o: In function `sep_sha1_final':
sep_crypto.c:(.text+0x245fcf): undefined reference to `crypto_enqueue_request'
drivers/built-in.o: In function `sep_sha1_finup':
sep_crypto.c:(.text+0x24604f): undefined reference to `crypto_enqueue_request'
drivers/built-in.o: In function `sep_sha1_digest':
sep_crypto.c:(.text+0x2460de): undefined reference to `crypto_enqueue_request'
drivers/built-in.o:sep_crypto.c:(.text+0x24616e): more undefined references to `crypto_enqueue_request' follow
drivers/built-in.o: In function `sep_crypto_block':
sep_crypto.c:(.text+0x247c81): undefined reference to `ablkcipher_walk_phys'
sep_crypto.c:(.text+0x247e40): undefined reference to `ablkcipher_walk_phys'
drivers/built-in.o: In function `sep_dequeuer':
sep_crypto.c:(.text+0x248ab9): undefined reference to `crypto_dequeue_request'
sep_crypto.c:(.text+0x248afa): undefined reference to `crypto_ahash_type'
sep_crypto.c:(.text+0x248fdf): undefined reference to `crypto_dequeue_request'
drivers/built-in.o: In function `sep_crypto_setup':
(.text+0x24902a): undefined reference to `crypto_init_queue'
drivers/built-in.o: In function `sep_crypto_setup':
(.text+0x24909c): undefined reference to `crypto_register_ahash'
drivers/built-in.o: In function `sep_crypto_setup':
(.text+0x2490c4): undefined reference to `crypto_register_alg'
drivers/built-in.o: In function `sep_crypto_setup':
(.text+0x2490f7): undefined reference to `crypto_unregister_alg'
drivers/built-in.o: In function `sep_crypto_setup':
(.text+0x249118): undefined reference to `crypto_unregister_ahash'
drivers/built-in.o: In function `sep_crypto_takedown':
(.text+0x249176): undefined reference to `crypto_unregister_ahash'
drivers/built-in.o: In function `sep_crypto_takedown':
(.text+0x249197): undefined reference to `crypto_unregister_alg'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Disable device functions and unregister notifier if available. The
serio device must not be "kzallocated". Otherwise serio_unregister_port
will fail because the device is already freed.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This implements the unregistering of notifiers so kernel modules
can be unloaded.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Keyboard and mouse drivers were missing MODULE_ALIAS
definitions. This fixes auto module loading of these
drivers.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

EXPORT_SYMBOL and inline directives are contradictory to each other.
The patch fixes this inconsistency.

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Denis Efremov <yefremov.denis@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When allocating a buffer to support asynchronous comedi commands, if a
DMA coherent buffer was requested but `CONFIG_HAS_DMA` is undefined,
bail out of local helper function `__comedi_buf_alloc()` with an error
message.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

"ni_mio_common.c" holds common code included by "ni_pcimio.c",
"ni_atmio.c" and "ni_mio_cs.c", including a common initialization
function `ni_E_init()`.  Amongst other things, this initializes some
counter subdevices to support comedi instructions and asynchronous
commands.  However, even though it sets up the handlers to support
asynchronous commands on these subdevices, the handlers will return an
error unless the `PCIDMA` macro is defined (which is defined only in
"ni_pcimio.c").  If the `PCIDMA` macro is not defined, the comedi core
will needlessly allocate buffers to support the asynchronous commands.
Also, `s->async_dma_dir` is set to `DMA_BIDIRECTIONAL`, causing the
physical pages for the buffers to be allocated using
`dma_alloc_coherent()`.

If the comedi core cannot call `dma_alloc_coherent()` because
`CONFIG_HAS_DMA` is not defined, it will fail to allocate the buffers,
which ultimately causes `ni_E_init()` to fail.

Avoid the wastage and prevent the failure by only setting up
asynchronous command support for the counter subdevices if the `PCIDMA`
macro is defined.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The core "comedi" module and the "mite" helper module for NI PCI devices
both have calls to `dma_alloc_coherent()` and `dma_free_coherent()`.
Those functions are only available if `CONFIG_HAS_DMA` is defined.

Apart from the "mite" module, the functions are only called for comedi
drivers that set `s->async_dma_dir` (where `s` is a pointer to a `struct
comedi_subdevice`) to anything other than `DMA_NONE`.

Change local helper functions `__comedi_buf_alloc()` and
`__comedi_buf_free()` to only call `dma_alloc_coherent()` and
`dma_free_coherent()` if `CONFIG_HAS_DMA` is defined.

Change the "Kconfig" to make the following configuration options depend
on `HAS_DMA`:

`COMEDI_MITE` - builds the "mite" module.
`COMEDI_NI_6527` - selects `COMEDI_MITE`.
`COMEDI_NI_65XX` - selects `COMEDI_MITE`.
`COMEDI_NI_670X` - selects `COMEDI_MITE`.
`COMEDI_NI_LABPC_PCI` - selects `COMEDI_MITE`.
`COMEDI_NI_PCIDIO` - selects `COMEDI_MITE`.
`COMEDI_NI_TIOCMD` - selects `COMEDI_MITE`.
`COMEDI_NI_660X` - selects `COMEDI_NI_TIOCMD`,
                   sets `s->async_dma_dir`.
`COMEDI_NI_PCIMIO` - selects `COMEDI_NI_TIOCMD`,
                     sets `s->async_dma_dir`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When a comedi device is successfully attached, those subdevices that
support asynchronous commands will have had buffers allocated
successfully.  It is possible to resize the buffers afterwards, but if
the resize fails the subdevice is left with no buffer
(`s->async->prealloc_buf == NULL`).  Currently, this also causes any
subsequent attempts to resize the buffer to fail with an error, which
seems like a bad idea.

Remove the check in `resize_async_buffer()` that causes the resize to
fail if the subdevice currently has no buffer (presumably due to the
failure of a previous resize attempt).  Callers of
`resize_async_buffer()` have already checked that the subdevice is
allowed to have a buffer.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

After merging the final tree, the next-20130424 build (powerpc
allyesconfig) failed like this:

drivers/staging/comedi/drivers/ni_labpc.c: In function 'labpc_ai_cmd':
drivers/staging/comedi/drivers/ni_labpc.c:980:9: error:
    implicit declaration of function 'virt_to_bus'
   [-Werror=implicit-function-declaration]

The virt_to_bus() is only needed for the ISA DMA support in this driver.

On powerpc, CONFIG_COMEDI_NI_LABPC_ISA cannot be enabled due to the
depends on VIRT_TO_BUS but the PCI driver, ni_labpc_pci, can be enabled.
That driver uses the ni_labpc driver for the common support code shared
by the ISA, PCI, and PCMCIA boards.

The ISA specific support, and the optional ISA DMA support, are currently
still in the common ni_labpc driver. The ISA specific code is protected
by #if IS_ENABLED(CONFIG_COMEDI_NI_LABPC_ISA) and the ISA DMA support
is protected by #ifdef CONFIG_ISA_DMA_API. This allows the ISA support
to be enabled on architectures that support VIRT_TO_BUS and optionally
enables ISA DMA support if ISA_DMA_API is enabled.

Unfortunately, the ISA DMA code uses virt_to_bus(). This results in
the build failure for architectures that enable ISA_DMA_API but do not
have VIRT_TO_BUS.

Add a new member to the private data, dma_addr, to hold the phys_addr_t
returned by virt_to_bus() and initialize it in the ISA specific
labpc_attach().

For architectures that enable ISA_DMA_API but not VIRT_TO_BUS, this
will fix the build error. This is also safe for architectures the
enable both options but don't enable COMEDI_NI_LABPC_ISA because the
dma channel (devpriv->dma_chan) is only initialized in the ISA
specific labpc_attach().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

use free_netdev() instead of kfree(pDevice->apdev)
Signed-off-by: Hema Prathaban <hemaklnce@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull tracing/kprobes update from Steven Rostedt:
 "The majority of these changes are from Masami Hiramatsu bringing
  kprobes up to par with the latest changes to ftrace (multi buffering
  and the new function probes).

  He also discovered and fixed some bugs in doing so.  When pulling in
  his patches, I also found a few minor bugs as well and fixed them.

  This also includes a compile fix for some archs that select the ring
  buffer but not tracing.

  I based this off of the last patch you took from me that fixed the
  merge conflict error, as that was the commit that had all the changes
  I needed for this set of changes."

* tag 'trace-fixes-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing/kprobes: Support soft-mode disabling
  tracing/kprobes: Support ftrace_event_file base multibuffer
  tracing/kprobes: Pass trace_probe directly from dispatcher
  tracing/kprobes: Increment probe hit-count even if it is used by perf
  tracing/kprobes: Use bool for retprobe checker
  ftrace: Fix function probe when more than one probe is added
  ftrace: Fix the output of enabled_functions debug file
  ftrace: Fix locking in register_ftrace_function_probe()
  tracing: Add helper function trace_create_new_event() to remove duplicate code
  tracing: Modify soft-mode only if there's no other referrer
  tracing: Indicate enabled soft-mode in enable file
  tracing/kprobes: Fix to increment return event probe hit-count
  ftrace: Cleanup regex_lock and ftrace_lock around hash updating
  ftrace, kprobes: Fix a deadlock on ftrace_regex_lock
  ftrace: Have ftrace_regex_write() return either read or error
  tracing: Return error if register_ftrace_function_probe() fails for event_enable_func()
  tracing: Don't succeed if event_enable_func did not register anything
  ring-buffer: Select IRQ_WORK

Merge tag 'stable/for-linus-3.10-rc0-tag-two' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

Pull Xen bug-fixes from Konrad Rzeszutek Wilk:
 - More fixes in the vCPU PVHVM hotplug path.
 - Add more documentation.
 - Fix various ARM related issues in the Xen generic drivers.
 - Updates in the xen-pciback driver per Bjorn's updates.
 - Mask the x2APIC feature for PV guests.

* tag 'stable/for-linus-3.10-rc0-tag-two' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/pci: Used cached MSI-X capability offset
  xen/pci: Use PCI_MSIX_TABLE_BIR, not PCI_MSIX_FLAGS_BIRMASK
  xen: clear IRQ_NOAUTOEN and IRQ_NOREQUEST
  xen: mask x2APIC feature in PV
  xen: SWIOTLB is only used on x86
  xen/spinlock: Fix check from greater than to be also be greater or equal to.
  xen/smp/pvhvm: Don't point per_cpu(xen_vpcu, 33 and larger) to shared_info
  xen/vcpu: Document the xen_vcpu_info and xen_vcpu
  xen/vcpu/pvhvm: Fix vcpu hotplugging hanging.

Pull second SCSI update from James "Jaj B" Bottomley:
 "This is the final round of SCSI patches for the merge window.  It
  consists mostly of driver updates (bnx2fc, ibmfc, fnic, lpfc,
  be2iscsi, pm80xx, qla4x and ipr).

  There's also the power management updates that complete the patches in
  Jens' tree, an iscsi refcounting problem fix from the last pull, some
  dif handling in scsi_debug fixes, a few nice code cleanups and an
  error handling busy bug fix."

* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (92 commits)
  [SCSI] qla2xxx: Update firmware link in Kconfig file.
  [SCSI] iscsi class, qla4xxx: fix sess/conn refcounting when find fns are used
  [SCSI] sas: unify the pointlessly separated enums sas_dev_type and sas_device_type
  [SCSI] pm80xx: thermal, sas controller config and error handling update
  [SCSI] pm80xx: NCQ error handling changes
  [SCSI] pm80xx: WWN Modification for PM8081/88/89 controllers
  [SCSI] pm80xx: Changed module name and debug messages update
  [SCSI] pm80xx: Firmware flash memory free fix, with addition of new memory region for it
  [SCSI] pm80xx: SPC new firmware changes for device id 0x8081 alone
  [SCSI] pm80xx: Added SPCv/ve specific hardware functionalities and relevant changes in common files
  [SCSI] pm80xx: MSI-X implementation for using 64 interrupts
  [SCSI] pm80xx: Updated common functions common for SPC and SPCv/ve
  [SCSI] pm80xx: Multiple inbound/outbound queue configuration
  [SCSI] pm80xx: Added SPCv/ve specific ids, variables and modify for SPC
  [SCSI] lpfc: fix up Kconfig dependencies
  [SCSI] Handle MLQUEUE busy response in scsi_send_eh_cmnd
  [SCSI] sd: change to auto suspend mode
  [SCSI] sd: use REQ_PM in sd's runtime suspend operation
  [SCSI] qla4xxx: Fix iocb_cnt calculation in qla4xxx_send_mbox_iocb()
  [SCSI] ufs: Correct the expected data transfersize
  ...

Pull idle update from Len Brown:
 "Add support for new Haswell-ULT CPU idle power states"

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  intel_idle: initial C8, C9, C10 support
  tools/power turbostat: display C8, C9, C10 residency

Pull audit changes from Eric Paris:
 "Al used to send pull requests every couple of years but he told me to
  just start pushing them to you directly.

  Our touching outside of core audit code is pretty straight forward.  A
  couple of interface changes which hit net/.  A simple argument bug
  calling audit functions in namei.c and the removal of some assembly
  branch prediction code on ppc"

* git://git.infradead.org/users/eparis/audit: (31 commits)
  audit: fix message spacing printing auid
  Revert "audit: move kaudit thread start from auditd registration to kaudit init"
  audit: vfs: fix audit_inode call in O_CREAT case of do_last
  audit: Make testing for a valid loginuid explicit.
  audit: fix event coverage of AUDIT_ANOM_LINK
  audit: use spin_lock in audit_receive_msg to process tty logging
  audit: do not needlessly take a lock in tty_audit_exit
  audit: do not needlessly take a spinlock in copy_signal
  audit: add an option to control logging of passwords with pam_tty_audit
  audit: use spin_lock_irqsave/restore in audit tty code
  helper for some session id stuff
  audit: use a consistent audit helper to log lsm information
  audit: push loginuid and sessionid processing down
  audit: stop pushing loginid, uid, sessionid as arguments
  audit: remove the old depricated kernel interface
  audit: make validity checking generic
  audit: allow checking the type of audit message in the user filter
  audit: fix build break when AUDIT_DEBUG == 2
  audit: remove duplicate export of audit_enabled
  Audit: do not print error when LSMs disabled
  ...

Pull nfsd fixes from Bruce Fields:
 "Small fixes for two bugs and two warnings"

* 'for-3.10' of git://linux-nfs.org/~bfields/linux:
  nfsd: fix oops when legacy_recdir_name_error is passed a -ENOENT error
  SUNRPC: fix decoding of optional gss-proxy xdr fields
  SUNRPC: Refactor gssx_dec_option_array() to kill uninitialized warning
  nfsd4: don't allow owner override on 4.1 CLAIM_FH opens

Pull x86 platform drivers from Matthew Garrett:
 "Small set of updates, mainly trivial bugfixes and some small updates
  to deal with newer hardware.

  There's also a new driver that allows qemu guests to notify the
  hypervisor that they've just paniced, which seems useful."

* 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86:
  Add support for fan button on Ideapad Z580
  pvpanic: pvpanic device driver
  asus-nb-wmi: set wapf=4 for ASUSTeK COMPUTER INC. X75A
  drivers: platform: x86: Use PTR_RET function
  sony-laptop: SVS151290S kbd backlight and gfx switch support
  hp-wmi: add more definitions for new event_id's
  dell-laptop: Fix krealloc() misuse in parse_da_table()
  hp_accel: Ignore the error from lis3lv02d_poweron() at resume
  dell: add new dell WMI format for the AIO machines

Pull stray syscall bits from Al Viro:
 "Several syscall-related commits that were missing from the original"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal:
  switch compat_sys_sysctl to COMPAT_SYSCALL_DEFINE
  unicore32: just use mmap_pgoff()...
  unify compat fanotify_mark(2), switch to COMPAT_SYSCALL_DEFINE
  x86, vm86: fix VM86 syscalls: use SYSCALL_DEFINEx(...)

Merge tag 'ecryptfs-3.10-rc1-ablkcipher' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs

Pull eCryptfs update from Tyler Hicks:
 "Improve performance when AES-NI (and most likely other crypto
  accelerators) is available by moving to the ablkcipher crypto API.
  The improvement is more apparent on faster storage devices.

  There's no noticeable change when hardware crypto is not available"

* tag 'ecryptfs-3.10-rc1-ablkcipher' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs:
  eCryptfs: Use the ablkcipher crypto API

Pull misc fixes from David Woodhouse:
 "This is some miscellaneous cleanups that don't really belong anywhere
  else (or were ignored), that have been sitting in linux-next for some
  time.  Two of them are fixes resulting from my audit of krealloc()
  usage that don't seem to have elicited any response when I posted
  them, and the other three are patches from Artem removing dead code."

* tag 'for-linus-20130509' of git://git.infradead.org/~dwmw2/random-2.6:
  pcmcia: remove RPX board stuff
  m68k: remove rpxlite stuff
  pcmcia: remove Motorola MBX860 support
  params: Fix potential memory leak in add_sysfs_param()
  dell-laptop: Fix krealloc() misuse in parse_da_table()