- 23 Apr, 2022 17 commits
-
-
Vladimir Oltean authored
This adds an initial subset of forwarding selftests which I considered to be relevant for DSA drivers, along with a forwarding.config that makes it easier to run them (disables veth pair creation, makes sure MAC addresses are unique and stable). The intention is to request driver writers to run these selftests during review and make sure that the tests pass, or at least that the problems are known. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
This tests the capability of switch ports to filter out undesired traffic. Different drivers are expected to have different capabilities here (so some may fail and some may pass), yet the test still has some value, for example to check for regressions. There are 2 kinds of failures, one is when a packet which should have been accepted isn't (and that should be fixed), and the other "failure" (as reported by the test) is when a packet could have been filtered out (for being unnecessary) yet it was received. The bridge driver fares particularly badly at this test: TEST: br0: Unicast IPv4 to primary MAC address [ OK ] TEST: br0: Unicast IPv4 to macvlan MAC address [ OK ] TEST: br0: Unicast IPv4 to unknown MAC address [FAIL] reception succeeded, but should have failed TEST: br0: Unicast IPv4 to unknown MAC address, promisc [ OK ] TEST: br0: Unicast IPv4 to unknown MAC address, allmulti [FAIL] reception succeeded, but should have failed TEST: br0: Multicast IPv4 to joined group [ OK ] TEST: br0: Multicast IPv4 to unknown group [FAIL] reception succeeded, but should have failed TEST: br0: Multicast IPv4 to unknown group, promisc [ OK ] TEST: br0: Multicast IPv4 to unknown group, allmulti [ OK ] TEST: br0: Multicast IPv6 to joined group [ OK ] TEST: br0: Multicast IPv6 to unknown group [FAIL] reception succeeded, but should have failed TEST: br0: Multicast IPv6 to unknown group, promisc [ OK ] TEST: br0: Multicast IPv6 to unknown group, allmulti [ OK ] mainly because it does not implement IFF_UNICAST_FLT. Yet I still think having the test (with the failures) is useful in case somebody wants to tackle that problem in the future, to make an easy before-and-after comparison. Signed-off-by: -
Vladimir Oltean authored
Bombard a standalone switch port with various kinds of traffic to ensure it is really standalone and doesn't leak packets to other switch ports. Also check for switch ports in different bridges, and switch ports in a VLAN-aware bridge but having different pvids. No forwarding should take place in either case. Signed-off-by:
-
Vladimir Oltean authored
Pinging an IPv6 link-local multicast address selects the link-local unicast address of the interface as source, and we'd like to monitor for that in tcpdump. Add a helper to the forwarding library which retrieves the link-local IPv6 address of an interface, to make that task easier. Signed-off-by:
-
Vladimir Oltean authored
Extend the forwarding library with calls to some small C programs which join an IP multicast group and send some packets to it. Both IPv4 and IPv6 groups are supported. Use cases range from testing IGMP/MLD snooping, to RX filtering, to multicast routing. Testing multicast traffic using msend/mreceive is intended to be done using tcpdump. Signed-off-by:
-
Joachim Wiberg authored
Extend tcpdump_start() & C:o to handle multiple instances. Useful when observing bridge operation, e.g., unicast learning/flooding, and any case of multicast distribution (to these ports but not that one ...). This means the interface argument is now a mandatory argument to all tcpdump_*() functions, hence the changes to the ocelot flower test. Signed-off-by:
Joachim Wiberg <troglobit@gmail.com> Reviewed-by:
-
Joachim Wiberg authored
For some use-cases we may want to change the tcpdump flags used in tcpdump_start(). For instance, observing interfaces without the PROMISC flag, e.g. to see what's really being forwarded to the bridge interface. Signed-off-by:
-
Vladimir Oltean authored
By default, DSA switch ports inherit their MAC address from the DSA master. This works well for practical situations, but some selftests like bridge_vlan_unaware.sh loop back 2 standalone DSA ports with 2 bridged DSA ports, and require the bridge to forward packets between the standalone ports. Due to the bridge seeing that the MAC DA it needs to forward is present as a local FDB entry (it coincides with the MAC address of the bridge ports), the test packets are not forwarded, but terminated locally on br0. In turn, this makes the ping and ping6 tests fail. Address this by introducing an option to have stable MAC addresses. When mac_addr_prepare is called, the current addresses of the netifs are saved and replaced with 00:01:02:03:04:${netif number}. Then when mac_addr_restore is called at the end of the test, the original MAC addresses are restored. This ensures that the MAC addresses are unique, which makes the test pass even for DSA ports. The usage model is for the behavior to be opt-in via STABLE_MAC_ADDRS, which DSA should set to true, all others behave as before. By hooking the calls to mac_addr_prepare and mac_addr_restore within the forwarding lib itself, we do not need to patch each individual selftest, the only requirement is that pre_cleanup is called. Signed-off-by: -
David S. Miller authored
Mat Martineau says: ==================== mptcp: TCP fallback for established connections RFC 8684 allows some MPTCP connections to fall back to regular TCP when the MPTCP DSS checksum detects middlebox interference, there is only a single subflow, and there is no unacknowledged out-of-sequence data. When this condition is detected, the stack sends a MPTCP DSS option with an "infinite mapping" to signal that a fallback is happening, and the peers will stop sending MPTCP options in their TCP headers. The Linux MPTCP stack has not yet supported this type of fallback, instead closing the connection when the MPTCP checksum fails. This series adds support for fallback to regular TCP in a more limited scenario, for only MPTCP connections that have never connected additional subflows or transmitted out-of-sequence data. The selftests are also updated to check new MIBs that track infinite mappings. ==================== Signed-off-by: -
Geliang Tang authored
This patch adds a function chk_infi_nr() to check the mibs for the infinite mapping. Invoke it in chk_join_nr() when validate_checksum is set. Signed-off-by:
Geliang Tang <geliang.tang@suse.com> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
Geliang Tang authored
In trace event class mptcp_dump_mpext, dump the newly added infinite_map field of struct mptcp_dump_mpext too. Signed-off-by:
-
Geliang Tang authored
This patch adds a new mib named MPTCP_MIB_INFINITEMAPTX, increase it when a infinite mapping has been sent out. Signed-off-by:
-
Geliang Tang authored
This patch adds the infinite mapping receiving logic. When the infinite mapping is received, set the map_data_len of the subflow to 0. In subflow_check_data_avail(), only reset the subflow when the map_data_len of the subflow is non-zero. Suggested-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Geliang Tang authored
This patch adds the infinite mapping sending logic. Add a new flag send_infinite_map in struct mptcp_subflow_context. Set it true when a single contiguous subflow is in use and the allow_infinite_fallback flag is true in mptcp_pm_mp_fail_received(). In mptcp_sendmsg_frag(), if this flag is true, call the new function mptcp_update_infinite_map() to set the infinite mapping. Add a new flag infinite_map in struct mptcp_ext, set it true in mptcp_update_infinite_map(), and check this flag in a new helper mptcp_check_infinite_map(). In mptcp_update_infinite_map(), set data_len to 0, and clear the send_infinite_map flag, then do fallback. In mptcp_established_options(), use the helper mptcp_check_infinite_map() to let the infinite mapping DSS can be sent out in the fallback mode. Suggested-by:
-
Geliang Tang authored
This patch adds a new member allow_infinite_fallback in mptcp_sock, which is initialized to 'true' when the connection begins and is set to 'false' on any retransmit or successful MP_JOIN. Only do infinite mapping fallback if there is a single subflow AND there have been no retransmissions AND there have never been any MP_JOINs. Suggested-by:
-
Geliang Tang authored
This patch adds the fallback check in subflow_check_data_avail(). Only do the fallback when the msk hasn't fallen back yet. Suggested-by:
-
Geliang Tang authored
When a bad checksum is detected and a single subflow is in use, don't send RST + MP_FAIL, send data_ack + MP_FAIL instead. So invoke tcp_send_active_reset() only when mptcp_has_another_subflow() is true. Signed-off-by:
-
- 22 Apr, 2022 23 commits
-
-
Colin Ian King authored
There is a spelling mistake in a netdev_info message. Fix it. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20220421085546.321792-1-colin.i.king@gmail.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Haowen Bai authored
No need to add null check before call of_node_put(), since the implementation of of_node_put() has done it. Signed-off-by:
Haowen Bai <baihaowen@meizu.com> Link: https://lore.kernel.org/r/1650509283-26168-1-git-send-email-baihaowen@meizu.comSigned-off-by:
-
Jakub Kicinski authored
Arun Ramadoss says: ==================== add ethtool SQI support for LAN87xx T1 Phy This patch series add the Signal Quality Index measurement for the LAN87xx and LAN937x T1 phy. Updated the maintainers file for microchip_t1.c. ==================== Link: https://lore.kernel.org/r/20220420152016.9680-1-arun.ramadoss@microchip.comSigned-off-by:
-
Arun Ramadoss authored
Signed-off-by:
Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by:
-
Arun Ramadoss authored
This patch add the support for measuring Signal Quality Index for LAN87xx and LAN937x T1 Phy. It uses the SQI Method 5 for obtaining the values. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Jiri Pirko authored
types_info->ini_files is an array of pointers to struct mlxsw_linecard_ini_file. Fix the kmalloc_array() argument to be of a size of a pointer. Addresses-Coverity: ("Incorrect expression (SIZEOF_MISMATCH)") Fixes: b217127e ("mlxsw: core_linecards: Add line card objects and implement provisioning") Signed-off-by:Jiri Pirko <jiri@nvidia.com> Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20220420142007.3041173-1-idosch@nvidia.comSigned-off-by:
-
Guillaume Nault authored
qed_nvmetcp_ip_services.c and its corresponding header file were introduced in commit 806ee7f8 ("qed: Add IP services APIs support") but there's still no users for any of the functions they declare. Since these files are effectively unused, let's just drop them. Found by code inspection. Compile-tested only. Signed-off-by:
Guillaume Nault <gnault@redhat.com> Link: https://lore.kernel.org/r/351ac8c847980e22850eb390553f8cc0e1ccd0ce.1650545051.git.gnault@redhat.comSigned-off-by:
-
Lorenzo Bianconi authored
This patch converts the existing mediatek-net.txt binding file in yaml format. Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
David S. Miller authored
Guillaume Nault says: ==================== ipv4: First steps toward removing RTO_ONLINK RTO_ONLINK is a flag that allows to reduce the scope of route lookups. It's stored in a normally unused bit of the ->flowi4_tos field, in struct flowi4. However it has several problems: * This bit is also used by ECN. Although ECN bits are supposed to be cleared before doing a route lookup, it happened that some code paths didn't properly sanitise their ->flowi4_tos. So this mechanism is fragile and we had bugs in the past where ECN bits slipped in and could end up being erroneously interpreted as RTO_ONLINK. * A dscp_t type was recently introduced to ensure ECN bits are cleared during route lookups. ->flowi4_tos is the most important structure field to convert, but RTO_ONLINK prevents such conversion, as dscp_t mandates that ECN bits (where RTO_ONLINK is stored) be zero. Therefore we need to stop using RTO_ONLINK altogether. Fortunately RTO_ONLINK isn't a necessity. Instead of passing a flag in ->flowi4_tos to tell the route lookup function to restrict the scope, we can simply initialise the scope correctly. Patch 1 does some preparatory work: it stops resetting ->flowi4_scope automatically before a route lookup, thus allowing callers to set their desired scope without having to rely on the RTO_ONLINK flag. Patch 2-3 convert a few code paths to avoid relying on RTO_ONLINK. More conversions will have to take place before we can eventually remove this flag. ==================== Signed-off-by: -
Guillaume Nault authored
All the *_redirect() and *_update_pmtu() functions initialise their struct flowi4 variable with either __build_flow_key() or build_sk_flow_key(). When sk is provided, these functions use RT_CONN_FLAGS() to set ->flowi4_tos and always use RT_SCOPE_UNIVERSE for ->flowi4_scope. Then they rely on ip_rt_fix_tos() to adjust the scope based on the RTO_ONLINK bit and to mask the tos with IPTOS_RT_MASK. This patch modifies __build_flow_key() and build_sk_flow_key() to properly initialise ->flowi4_tos and ->flowi4_scope, so that the ICMP redirects and PMTU handlers don't need an extra call to ip_rt_fix_tos() before doing a fib lookup. That is, we: * Drop RT_CONN_FLAGS(): use ip_sock_rt_tos() and ip_sock_rt_scope() instead, so that we don't have to rely on ip_rt_fix_tos() to adjust the scope anymore. * Apply IPTOS_RT_MASK to the tos, so that we don't need ip_rt_fix_tos() to do it for us. * Drop the ip_rt_fix_tos() calls that now become useless. The only remaining ip_rt_fix_tos() caller is ip_route_output_key_hash() which needs it as long as external callers still use the RTO_ONLINK flag. Note: This patch also drops some useless RT_TOS() calls as IPTOS_RT_MASK is a stronger mask. Signed-off-by:David Ahern <dsahern@kernel.org> Signed-off-by:
-
Guillaume Nault authored
Now that ip_rt_fix_tos() doesn't reset ->flowi4_scope unconditionally, we don't have to rely on the RTO_ONLINK bit to properly set the scope of a flowi4 structure. We can just set ->flowi4_scope explicitly and avoid using RTO_ONLINK in ->flowi4_tos. This patch converts callers of ip_route_connect(). Instead of setting the tos parameter with RT_CONN_FLAGS(sk), as all callers do, we can: 1- Drop the tos parameter from ip_route_connect(): its value was entirely based on sk, which is also passed as parameter. 2- Set ->flowi4_scope depending on the SOCK_LOCALROUTE socket option instead of always initialising it with RT_SCOPE_UNIVERSE (let's define ip_sock_rt_scope() for this purpose). 3- Avoid overloading ->flowi4_tos with RTO_ONLINK: since the scope is now properly initialised, we don't need to tell ip_rt_fix_tos() to adjust ->flowi4_scope for us. So let's define ip_sock_rt_tos(), which is the same as RT_CONN_FLAGS() but without the RTO_ONLINK bit overload. Note: In the original ip_route_connect() code, __ip_route_output_key() might clear the RTO_ONLINK bit of fl4->flowi4_tos (because of ip_rt_fix_tos()). Therefore flowi4_update_output() had to reuse the original tos variable. Now that we don't set RTO_ONLINK any more, this is not a problem and we can use fl4->flowi4_tos in flowi4_update_output(). Signed-off-by: -
Guillaume Nault authored
All callers already initialise ->flowi4_scope with RT_SCOPE_UNIVERSE, either by manual field assignment, memset(0) of the whole structure or implicit structure initialisation of on-stack variables (RT_SCOPE_UNIVERSE actually equals 0). Therefore, we don't need to always initialise ->flowi4_scope in ip_rt_fix_tos(). We only need to reduce the scope to RT_SCOPE_LINK when the special RTO_ONLINK flag is present in the tos. This will allow some code simplification, like removing ip_rt_fix_tos(). Also, the long term idea is to remove RTO_ONLINK entirely by properly initialising ->flowi4_scope, instead of overloading ->flowi4_tos with a special flag. Eventually, this will allow to convert ->flowi4_tos to dscp_t. Signed-off-by:
-
David S. Miller authored
Radhey Shyam Pandey says: ==================== net: macb: Make ZynqMP SGMII phy configuration optional This patchset drop phy-names property from MACB node and also make SGMII Phy configuration optional. The motivation for this change is to support traditional usescase in which first stage bootloader does PS-GT configuration, and should still be supported in macb driver. ==================== Signed-off-by: -
Radhey Shyam Pandey authored
In the macb binding documentation "phys" is an optional property. Make implementation in line with it. This change allows the traditional flow in which first stage bootloader does PS-GT configuration to work along with newer use cases in which PS-GT configuration is managed by the phy-zynqmp driver. It fixes below macb probe failure when macb DT node doesn't have SGMII phys handle. "macb ff0b0000.ethernet: error -ENODEV: failed to get PS-GTR PHY" Signed-off-by:
Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Reviewed-by:
Michal Simek <michal.simek@xilinx.com> Signed-off-by:
-
Radhey Shyam Pandey authored
In zynqmp SGMII initialization, there is a single PHY so remove phy-names property as there is no real need of having it. Signed-off-by:
-
David S. Miller authored
Kuniyuki Iwashima says: ==================== ipv6: Use ipv6_only_sock helper function. The first patch removes __ipv6_only_sock(), and the second replaces ipv6only tests with ipv6_only_sock(). ==================== Signed-off-by: -
Kuniyuki Iwashima authored
This patch replaces some sk_ipv6only tests with ipv6_only_sock(). Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.co.jp> Reviewed-by:
-
Kuniyuki Iwashima authored
Since commit 9fe516ba ("inet: move ipv6only in sock_common"), ipv6_only_sock() and __ipv6_only_sock() are the same macro. Let's remove the one. Signed-off-by:
-
Tom Rix authored
Smatch reports this issue sr9800.h:166:53: warning: symbol 'SR9800_BULKIN_SIZE' was not declared. Should it be static? Global variables should not be defined in header files. This only works because sr9800.h in only included by sr9800.c Change the storage-class specifier to static. And since it does not change add type qualifier const. Signed-off-by:
Tom Rix <trix@redhat.com> Signed-off-by:
-
Florent Fourcot authored
This reverts commit b6177d32 ip-link command is testing kernel capability by sending a RTM_NEWLINK request, without any argument. It accepts everything in reply, except EOPNOTSUPP and EINVAL (functions iplink_have_newlink / accept_msg) So we must keep compatiblity here, invalid empty message should not return EINVAL Signed-off-by:
Florent Fourcot <florent.fourcot@wifirst.fr> Tested-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Baowen Zheng authored
The NFP driver already supports assignment of 802.1Q VLANs to VFs e.g. # ip link set $DEV vf $VF_NUM vlan $VLAN_ID [proto 802.1Q] This patch enhances the NFP driver to also allow assingment of 802.1ad VLANs to VFs. e.g. # ip link set $DEV vf $VF_NUM vlan $VLAN_ID proto 802.1ad Signed-off-by:
Bin Chen <bin.chen@corigine.com> Signed-off-by:
Baowen Zheng <baowen.zheng@corigine.com> Signed-off-by:
Yinjun Zhang <yunjin.zhang@corigine.com> Signed-off-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
-
Minghao Chi authored
Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync and pm_runtime_put_noidle. This change is just to simplify the code, no actual functional changes. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by:
-
Arun Ajith S authored
Fix mistake in the original patch where limits were specified but the handler didn't take care of the limits. Signed-off-by:
Arun Ajith S <aajith@arista.com> Reviewed-by:
-
