- 25 May, 2017 40 commits
-
-
Bjørn Mork authored
commit 8d7a10dd upstream. In their infinite wisdom, and never ending quest for end user frustration, Lenovo has decided to use new USB device IDs for the wwan modules in their 2017 laptops. The actual hardware is still the Sierra Wireless EM7455 or EM7430, depending on region. Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Daniele Palmas authored
commit 40dd4604 upstream. This patch adds support for Telit ME910 PID 0x1100. Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Signed-off-by:
-
Johan Hovold authored
commit dd5ca753 upstream. Drop erroneous le16_to_cpu when returning the USB device speed which is already in host byte order. Found using sparse: warning: cast to restricted __le16 Fixes: 946b960d ("USB: add driver for iowarrior devices.") Signed-off-by:
-
Tony Lindgren authored
commit 3c50ffef upstream. Commit d8e5f0ec ("usb: musb: Fix hardirq-safe hardirq-unsafe lock order error") caused a regression where musb keeps trying to enable host mode with no cable connected. This seems to be caused by the fact that now phy is enabled earlier, and we are wrongly trying to force USB host mode on an OTG port. The errors we are getting are "trying to suspend as a_idle while active". For ports configured as OTG, we should not need to do anything to try to force USB host mode on it's OTG port. Trying to force host mode in this case just seems to completely confuse the musb state machine. Let's fix the issue by making musb_host_setup() attempt to force the mode only if port_mode is configured for host mode. Fixes: d8e5f0ec ("usb: musb: Fix hardirq-safe hardirq-unsafe lock order error") Cc: Johan Hovold <johan@kernel.org> Reported-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reported-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Bin Liu <b-liu@ti.com> Signed-off-by:
-
Peter Ujfalusi authored
commit 6df2b42f upstream. We have one register for each EP to set the maximum packet size for both TX and RX. If for example an RX programming would happen before the previous TX transfer finishes we would reset the TX packet side. To fix this issue, only modify the TX or RX part of the register. Fixes: 550a7375 ("USB: Add MUSB and TUSB support") Signed-off-by:
-
Thinh Nguyen authored
commit d325a1de upstream. The dwc3 driver can overwite its previous events if its top-half IRQ handler (TH) gets invoked again before processing the events in the cache. We see this as a hang in the file transfer and the host will attempt to reset the device. TH gets the event count and deasserts the interrupt line by writing DWC3_GEVNTSIZ_INTMASK to DWC3_GEVNTSIZ. If there's a new event coming between reading the event count and interrupt deassertion, dwc3 will lose previous pending events. More generally, we will see 0 event count, which should not affect anything. This shouldn't be possible in the current dwc3 implementation. However, through testing and reading the PCIe trace, the TH occasionally still gets invoked one more time after HW interrupt deassertion. (With PCIe legacy interrupts, TH is called repeatedly as long as the interrupt line is asserted). We suspect that there is a small detection delay in the SW. To avoid this issue, Check DWC3_EVENT_PENDING flag to determine if the events are processed in the bottom-half IRQ handler. If not, return IRQ_HANDLED and don't process new event. Signed-off-by:
Thinh Nguyen <thinhn@synopsys.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Ben Hutchings authored
commit bf05b65a upstream. dvb-usb-dibusb-mc-common is licensed under GPLv2, and if we don't say so then it won't even load since it needs a GPL-only symbol. Fixes: e91455a1 ("[media] dvb-usb: split out common parts of dibusb") Reported-by:
Dominique Dumont <dod@debian.org> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Alyssa Milburn authored
commit a12b8ab8 upstream. Otherwise ttusb2_i2c_xfer can read or write beyond the end of static and heap buffers. Signed-off-by:
Alyssa Milburn <amilburn@zall.org> Signed-off-by:
-
Johan Hovold authored
commit 03eb2a55 upstream. Make sure to check for the required out endpoint to avoid dereferencing a NULL-pointer in mce_request_packet should a malicious device lack such an endpoint. Note that this path is hit during probe. Fixes: 66e89522 ("V4L/DVB: IR: add mceusb IR receiver driver") Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Johan Hovold authored
commit eacb975b upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer or accessing memory beyond the endpoint array should a malicious device lack the expected endpoints. Fixes: 2a9f8b5d ("V4L/DVB (5206): Usbvision: set alternate interface modification") Cc: Thierry MERLE <thierry.merle@free.fr> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Johan Hovold authored
commit 75cf0679 upstream. Add missing endianness conversion when using the USB device-descriptor bcdDevice field to construct a firmware file name. Fixes: 8ef80aef ("[IRDA]: irda-usb.c: STIR421x cleanups") Cc: Nick Fedchik <nfedchik@atlantic-link.com.ua> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Peter Chen authored
commit 7480d912 upstream. According to xHCI ch4.20 Scratchpad Buffers, the Scratchpad Buffer needs to be zeroed. ... The following operations take place to allocate Scratchpad Buffers to the xHC: ... b. Software clears the Scratchpad Buffer to '0' Signed-off-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Mathias Nyman authored
commit a0c16630 upstream. Intel Denverton microserver is Atom based and need the PME and CAS quirks as well. Signed-off-by:
-
Alan Stern authored
commit 63aea0db upstream. With threaded interrupts, bottom-half handlers are called with interrupts enabled. Therefore they can't safely use spin_lock(); they have to use spin_lock_irqsave(). Lockdep warns about a violation occurring in xhci_irq(): ========================================================= [ INFO: possible irq lock inversion dependency detected ] 4.11.0-rc8-dbg+ #1 Not tainted --------------------------------------------------------- swapper/7/0 just changed the state of lock: (&(&ehci->lock)->rlock){-.-...}, at: [<ffffffffa0130a69>] ehci_hrtimer_func+0x29/0xc0 [ehci_hcd] but this lock took another, HARDIRQ-unsafe lock in the past: (hcd_urb_list_lock){+.....} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(hcd_urb_list_lock); local_irq_disable(); lock(&(&ehci->lock)->rlock); lock(hcd_urb_list_lock); <Interrupt> lock(&(&ehci->lock)->rlock); *** DEADLOCK *** no locks held by swapper/7/0. the shortest dependencies between 2nd lock and 1st lock: -> (hcd_urb_list_lock){+.....} ops: 252 { HARDIRQ-ON-W at: __lock_acquire+0x602/0x1280 lock_acquire+0xd5/0x1c0 _raw_spin_lock+0x2f/0x40 usb_hcd_unlink_urb_from_ep+0x1b/0x60 [usbcore] xhci_giveback_urb_in_irq.isra.45+0x70/0x1b0 [xhci_hcd] finish_td.constprop.60+0x1d8/0x2e0 [xhci_hcd] xhci_irq+0xdd6/0x1fa0 [xhci_hcd] usb_hcd_irq+0x26/0x40 [usbcore] irq_forced_thread_fn+0x2f/0x70 irq_thread+0x149/0x1d0 kthread+0x113/0x150 ret_from_fork+0x2e/0x40 This patch fixes the problem. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by:
Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by:
-
Thomas Petazzoni authored
commit 4b148d51 upstream. platform_get_irq() returns an error code, but the xhci-plat driver ignores it and always returns -ENODEV. This is not correct, and prevents -EPROBE_DEFER from being propagated properly. Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by:
-
Matthias Lange authored
commit 5db851cf upstream. There is no reason to restrict allocations to the first 16MB ISA DMA addresses. It is causing problems in a virtualization setup with enabled IOMMU (x86_64). The result is that USB is not working in the VM. Signed-off-by:
Matthias Lange <matthias.lange@kernkonzept.com> Signed-off-by:
-
Mathias Nyman authored
commit 604d02a2 upstream. In 4.11 TRB completion codes were renamed to match spec. Completion codes for command ring stopped and endpoint stopped were mixed, leading to failures while handling a stopped command ring. Use the correct completion code for command ring stopped events. Fixes: 0b7c105a ("usb: host: xhci: rename completion codes to match spec") Signed-off-by:
-
Yazen Ghannam authored
commit eb77e6b8 upstream. The wrong index into the csbases/csmasks arrays was being passed to the function to compute the chip select sizes, which resulted in the wrong size being computed. Address that so that the correct values are computed and printed. Also, redo how we calculate the number of pages in a CS row. Reported-by:
Benjamin Bennett <benbennett@gmail.com> Signed-off-by:
Yazen Ghannam <yazen.ghannam@amd.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1493313114-11260-1-git-send-email-Yazen.Ghannam@amd.com [ Remove unneeded integer math comment, minor cleanups. ] Signed-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Jan Kara authored
commit 13e451fd upstream. Currently DAX read fault can race with write(2) in the following way: CPU1 - write(2) CPU2 - read fault dax_iomap_pte_fault() ->iomap_begin() - sees hole dax_iomap_rw() iomap_apply() ->iomap_begin - allocates blocks dax_iomap_actor() invalidate_inode_pages2_range() - there's nothing to invalidate grab_mapping_entry() - we add zero page in the radix tree and map it to page tables The result is that hole page is mapped into page tables (and thus zeros are seen in mmap) while file has data written in that place. Fix the problem by locking exception entry before mapping blocks for the fault. That way we are sure invalidate_inode_pages2_range() call for racing write will either block on entry lock waiting for the fault to finish (and unmap stale page tables after that) or read fault will see already allocated blocks by write(2). Fixes: 9f141d6e Link: http://lkml.kernel.org/r/20170510085419.27601-5-jack@suse.czSigned-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Toshi Kani authored
commit 8d13c029 upstream. ND_CMD_CLEAR_ERROR command returns 'clear_err.cleared', the length of error actually cleared, which may be smaller than its requested 'len'. Change nvdimm_clear_poison() to call nvdimm_forget_poison() with 'clear_err.cleared' when this value is valid. Fixes: e046114a ("libnvdimm: clear the internal poison_list when clearing badblocks") Cc: Dave Jiang <dave.jiang@intel.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by:
Toshi Kani <toshi.kani@hpe.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
David Howells authored
commit deccf497 upstream. stat/lstat/fstatat need to pass AT_NO_AUTOMOUNT to vfs_statx() as the pre-statx code didn't set LOOKUP_AUTOMOUNT, even though fstatat() accepted the AT_NO_AUTOMOUNT flag. Fixes: a528d35e ("statx: Add a system call to make enhanced file info available") Reported-by:
Ian Kent <raven@themaw.net> Signed-off-by:
David Howells <dhowells@redhat.com> Tested-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Johan Hovold authored
commit 63afd5cc upstream. Add missing endianness conversion when applying the Alea timeout quirk. Found using sparse: warning: restricted __le16 degrades to integer Fixes: e4a886e8 ("hwrng: chaoskey - Fix URB warning due to timeout on Alea") Cc: Bob Ham <bob.ham@collabora.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Keith Packard <keithp@keithp.com> Signed-off-by:
-
Andrey Korolyov authored
commit 5f63424a upstream. This patch adds support for recognition of ARM-USB-TINY(H) devices which are almost identical to ARM-USB-OCD(H) but lacking separate barrel jack and serial console. By suggestion from Johan Hovold it is possible to replace ftdi_jtag_quirk with a bit more generic construction. Since all Olimex-ARM debuggers has exactly two ports, we could safely always use only second port within the debugger family. Signed-off-by:
Andrey Korolyov <andrey@xdel.ru> Signed-off-by:
-
Anthony Mallet authored
commit bb246681 upstream. Commit 557aaa7f ("ft232: support the ASYNC_LOW_LATENCY flag") enables unprivileged users to set the FTDI latency timer, but there was a logic flaw that skipped sending the corresponding USB control message to the device. Specifically, the device latency timer would not be updated until next open, something which was later also inadvertently broken by commit c19db4c9 ("USB: ftdi_sio: set device latency timeout at port probe"). A recent commit c6dce262 ("USB: serial: ftdi_sio: fix extreme low-latency setting") disabled the low-latency mode by default so we now need this fix to allow unprivileged users to again enable it. Signed-off-by:
Anthony Mallet <anthony.mallet@laas.fr> [johan: amend commit message] Fixes: 557aaa7f ("ft232: support the ASYNC_LOW_LATENCY flag") Fixes: c19db4c9 ("USB: ftdi_sio: set device latency timeout at port probe"). Signed-off-by:
-
Kirill Tkhai authored
commit 3fd37226 upstream. Imagine we have a pid namespace and a task from its parent's pid_ns, which made setns() to the pid namespace. The task is doing fork(), while the pid namespace's child reaper is dying. We have the race between them: Task from parent pid_ns Child reaper copy_process() .. alloc_pid() .. .. zap_pid_ns_processes() .. disable_pid_allocation() .. read_lock(&tasklist_lock) .. iterate over pids in pid_ns .. kill tasks linked to pids .. read_unlock(&tasklist_lock) write_lock_irq(&tasklist_lock); .. attach_pid(p, PIDTYPE_PID); .. .. .. So, just created task p won't receive SIGKILL signal, and the pid namespace will be in contradictory state. Only manual kill will help there, but does the userspace care about this? I suppose, the most users just inject a task into a pid namespace and wait a SIGCHLD from it. The patch fixes the problem. It simply checks for (pid_ns->nr_hashed & PIDNS_HASH_ADDING) in copy_process(). We do it under the tasklist_lock, and can't skip PIDNS_HASH_ADDING as noted by Oleg: "zap_pid_ns_processes() does disable_pid_allocation() and then takes tasklist_lock to kill the whole namespace. Given that copy_process() checks PIDNS_HASH_ADDING under write_lock(tasklist) they can't race; if copy_process() takes this lock first, the new child will be killed, otherwise copy_process() can't miss the change in ->nr_hashed." If allocation is disabled, we just return -ENOMEM like it's made for such cases in alloc_pid(). v2: Do not move disable_pid_allocation(), do not introduce a new variable in copy_process() and simplify the patch as suggested by Oleg Nesterov. Account the problem with double irq enabling found by Eric W. Biederman. Fixes: c876ad76 ("pidns: Stop pid allocation when init dies") Signed-off-by:
Kirill Tkhai <ktkhai@virtuozzo.com> CC: Andrew Morton <akpm@linux-foundation.org> CC: Ingo Molnar <mingo@kernel.org> CC: Peter Zijlstra <peterz@infradead.org> CC: Oleg Nesterov <oleg@redhat.com> CC: Mike Rapoport <rppt@linux.vnet.ibm.com> CC: Michal Hocko <mhocko@suse.com> CC: Andy Lutomirski <luto@kernel.org> CC: "Eric W. Biederman" <ebiederm@xmission.com> CC: Andrei Vagin <avagin@openvz.org> CC: Cyrill Gorcunov <gorcunov@openvz.org> CC: Serge Hallyn <serge@hallyn.com> Acked-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
-
Eric W. Biederman authored
commit b9a985db upstream. The code can potentially sleep for an indefinite amount of time in zap_pid_ns_processes triggering the hung task timeout, and increasing the system average. This is undesirable. Sleep with a task state of TASK_INTERRUPTIBLE instead of TASK_UNINTERRUPTIBLE to remove these undesirable side effects. Apparently under heavy load this has been allowing Chrome to trigger the hung time task timeout error and cause ChromeOS to reboot. Reported-by:
Vovo Yang <vovoy@google.com> Reported-by:
Guenter Roeck <linux@roeck-us.net> Tested-by:
-
Michael J. Ruhl authored
commit 224d71f9 upstream. The only context that frees user_exp_rcv data structures is the last context closed (from a sub-context set). This leaks the allocations from the other sub-contexts. Separate the common frees from the specific frees and call them at the appropriate time. Using KEDR to check for memory leaks we get: Before test: [leak_check] Possible leaks: 25 After test: [leak_check] Possible leaks: 31 (6 leaked data structures) After patch applied (before and after test have the same value) [leak_check] Possible leaks: 25 Each leak is 192 + 13440 + 6720 = 20352 bytes per sub-context. Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Michael J. Ruhl authored
commit 94679061 upstream. If the eager buffer allocation fails, it is necessary to return an error code. Reviewed-by:
-
Fabrice Gasnier authored
commit 77a9febf upstream. When prescaler (PSC) is 0, it means div factor is 1: counter clock frequency is equal to input clk / (PSC + 1). When reload value is 8 for example, counter counts 9 cycles, from 0 to 8. This is handled in frequency write routine, by writing respectively: - prescaler - 1 to PSC - reload value - 1 to ARR This fix does the opposite when reading the frequency from PSC and ARR: - prescaler is PSC + 1 - reload value is ARR + 1 Thus, PSC may be 0, depending on requested sampling frequency (div 1). In this case, reading freq wrongly reports 0, instead of computing and reporting correct value. Remove test on !psc and !arr. Small test on stm32f4 (example on tim1_trgo), before this fix: $ cd /sys/bus/iio/devices/triggerX $ echo 10000 > sampling_frequency $ cat sampling_frequency 0 After this fix: $ echo 10000 > sampling_frequency $ cat sampling_frequency 10000 Signed-off-by:
Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Andreas Klinger authored
commit ed3730c4 upstream. While calculating the compensation of the humidity there are negative values interpreted as unsigned because of unsigned variables used. These values as well as the constants need to be casted to signed as indicated by the documentation of the sensor. Signed-off-by:
Andreas Klinger <ak@it-klinger.de> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by:
-
Pavel Roskin authored
commit ce420fd4 upstream. realbits, storagebits and shift should be numbers, not ASCII characters. Signed-off-by:
Pavel Roskin <plroskin@gmail.com> Reviewed-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
James Smart authored
commit 4492b739 upstream. To select the appropriate shost template, the driver is issuing a mailbox command to retrieve the wwn. Turns out the sending of the command precedes the reset of the function. On SLI-4 adapters, this is inconsequential as the mailbox command location is specified by dma via the BMBX register. However, on SLI-3 adapters, the location of the mailbox command submission area changes. When the function is first powered on or reset, the cmd is submitted via PCI bar memory. Later the driver changes the function config to use host memory and DMA. The request to start a mailbox command is the same, a simple doorbell write, regardless of submission area. So.. if there has not been a boot driver run against the adapter, the mailbox command works as defaults are ok. But, if the boot driver has configured the card and, and if no platform pci function/slot reset occurs as the os starts, the mailbox command will fail. The SLI-3 device will use the stale boot driver dma location. This can cause PCI eeh errors. Fix is to reset the sli-3 function before sending the mailbox command, thus synchronizing the function/driver on mailbox location. Note: The fix uses routines that are typically invoked later in the call flow to reset the sli-3 device. The issue in using those routines is that the normal (non-fix) flow does additional initialization, namely the allocation of the pport structure. So, rather than significantly reworking the initialization flow so that the pport is alloc'd first, pointer checks are added to work around it. Checks are limited to the routines invoked by a sli-3 adapter (s3 routines) as this fix/early call is only invoked on a sli3 adapter. Nothing changes post the fix. Subsequent initialization, and another adapter reset, still occur - both on sli-3 and sli-4 adapters. Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <james.smart@broadcom.com> Fixes: 96418b5e ("scsi: lpfc: Fix eh_deadline setting for sli3 adapters.") Reviewed-by:
Ewan D. Milne <emilne@redhat.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Bryant G. Ly authored
commit 25e78531 upstream. The driver is sending a response to the actual scsi op that was aborted by an abort task TM, while LIO is sending a response to the abort task TM. ibmvscsis_tgt does not send the response to the client until release_cmd time. The reason for this was because if we did it at queue_status time, then the client would be free to reuse the tag for that command, but we're still using the tag until the command is released at release_cmd time, so we chose to delay sending the response until then. That then caused this issue, because release_cmd is always called, even if queue_status is not. SCSI spec says that the initiator that sends the abort task TM NEVER gets a response to the aborted op and with the current code it will send a response. Thus this fix will remove that response if the CMD_T_ABORTED && !CMD_T_TAS. Another case with a small timing window is the case where if LIO sends a TMR_DOES_NOT_EXIST, and the release_cmd callback is called for the TMR Abort cmd before the release_cmd for the (attemped) aborted cmd, then we need to ensure that we send the response for the (attempted) abort cmd to the client before we send the response for the TMR Abort cmd. Signed-off-by:
Bryant G. Ly <bryantly@linux.vnet.ibm.com> Signed-off-by:
Michael Cyr <mikecyr@linux.vnet.ibm.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Johan Hovold authored
commit 49e67dd1 upstream. The memory allocator passed to __unflatten_device_tree() (e.g. a wrapped kzalloc) can fail so add the missing sanity check to avoid dereferencing a NULL pointer. Fixes: fe140423 ("of/flattree: Refactor unflatten_device_tree and add fdt_unflatten_tree") Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Tyrel Datwyler authored
commit b8475cbe upstream. The call to of_find_node_by_path("/cpus") returns the cpus device_node with its reference count incremented. There is no matching of_node_put() call in of_numa_parse_cpu_nodes() which results in a leaked reference to the "/cpus" node. This patch adds an of_node_put() to release the reference. fixes: 298535c0 ("of, numa: Add NUMA of binding implementation.") Signed-off-by:
Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Acked-by:
David Daney <david.daney@cavium.com> Signed-off-by:
-
Rob Herring authored
commit eb310036 upstream. sparse gives the following warning for 'pci_space': ../drivers/of/address.c:266:26: warning: incorrect type in assignment (different base types) ../drivers/of/address.c:266:26: expected unsigned int [unsigned] [usertype] pci_space ../drivers/of/address.c:266:26: got restricted __be32 const [usertype] <noident> It appears that pci_space is only ever accessed on powerpc, so the endian swap is often not needed. Signed-off-by:
-
Takashi Iwai authored
commit d66bb160 upstream. proc_create_mount_point() forgot to increase the parent's nlink, and it resulted in unbalanced hard link numbers, e.g. /proc/fs shows one less than expected. Fixes: eb6d38d5 ("proc: Allow creating permanently empty directories...") Reported-by:
Tristan Ye <tristan.ye@suse.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Vaibhav Jain authored
commit 4f58f0bf upstream. Fix a boundary condition where in some cases an eeh event that results in card reset isn't passed on to a driver attached to the virtual PCI device associated with a slice. This will happen in case when a slice attached device driver returns a value other than PCI_ERS_RESULT_NEED_RESET from the eeh error_detected() callback. This would result in an early return from cxl_pci_error_detected() and other drivers attached to other AFUs on the card wont be notified. The patch fixes this by making sure that all slice attached device-drivers are notified and the return values from error_detected() callback are aggregated in a scheme where request for 'disconnect' trumps all and 'none' trumps 'need_reset'. Fixes: 9e8df8a2 ("cxl: EEH support") Signed-off-by:
Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Reviewed-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by:
Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Vaibhav Jain authored
commit ea9a26d1 upstream. During an eeh event when the cxl card is fenced and card sysfs attr perst_reloads_same_image is set following warning message is seen in the kernel logs: Adapter context unlocked with 0 active contexts ------------[ cut here ]------------ WARNING: CPU: 12 PID: 627 at ../drivers/misc/cxl/main.c:325 cxl_adapter_context_unlock+0x60/0x80 [cxl] Even though this warning is harmless, it clutters the kernel log during an eeh event. This warning is triggered as the EEH callback cxl_pci_error_detected doesn't obtain a context-lock before forcibly detaching all active context and when context-lock is released during call to cxl_configure_adapter from cxl_pci_slot_reset, a warning in cxl_adapter_context_unlock is triggered. To fix this warning, we acquire the adapter context-lock via cxl_adapter_context_lock() in the eeh callback cxl_pci_error_detected() once all the virtual AFU PHBs are notified and their contexts detached. The context-lock is released in cxl_pci_slot_reset() after the adapter is successfully reconfigured and before the we call the slot_reset callback on slice attached device-drivers. Fixes: 70b565bb ("cxl: Prevent adapter reset if an active context exists") Reported-by:
Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Tested-by:
Uma Krishnan <ukrishn@linux.vnet.ibm.com> Signed-off-by:
-
Gerd Hoffmann authored
commit 21a60f6e upstream. On a loaded virtualization host (dozen guests booting at the same time) it may happen that the ohci controller emulation doesn't manage to do timely frame processing, with the result that the io watchdog fires and considers the controller being dead, even though it's only the emulation being unusual slow due to the load peak. So, add a quirk for qemu and don't use the watchdog in case we figure we are running on emulated ohci. The virtual ohci controller masquerades as apple ohci controller, but we can identify it by subsystem id. Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
-
