- 30 Mar, 2015 40 commits
-
-
Gregory CLEMENT authored
commit 43b68879 upstream. As stated in kernel/cpu_pm.c, "Platform is responsible for ensuring that cpu_pm_enter is not called twice on the same CPU before cpu_pm_exit is called.". In the current code in case of failure when calling mvebu_v7_cpu_suspend, the function cpu_pm_exit() is never called whereas cpu_pm_enter() was called just before. This patch moves the cpu_pm_exit() in order to balance the cpu_pm_enter() calls. Reported-by:
Fulvio Benini <fbf@libero.it> Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> [ luis: backported to 3.16: - file rename: cpuidle-mvebu-v7.c -> cpuidle-armada-370-xp.c - adjusted context ] Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Oleg Nesterov authored
commit f4c36863 upstream. drop_fpu() does clear_used_math() and usually this is correct because tsk == current. However switch_fpu_finish()->restore_fpu_checking() is called before __switch_to() updates the "current_task" variable. If it fails, we will wrongly clear the PF_USED_MATH flag of the previous task. So use clear_stopped_child_used_math() instead. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Reviewed-by:
Rik van Riel <riel@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Pekka Riikonen <priikone@iki.fi> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Suresh Siddha <sbsiddha@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20150309171041.GB11388@redhat.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Oleg Nesterov authored
commit a7c80ebc upstream. math_state_restore() assumes it is called with irqs disabled, but this is not true if the caller is __restore_xstate_sig(). This means that if ia32_fxstate == T and __copy_from_user() fails, __restore_xstate_sig() returns with irqs disabled too. This triggers: BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:41 dump_stack ___might_sleep ? _raw_spin_unlock_irqrestore __might_sleep down_read ? _raw_spin_unlock_irqrestore print_vma_addr signal_fault sys32_rt_sigreturn Change __restore_xstate_sig() to call set_used_math() unconditionally. This avoids enabling and disabling interrupts in math_state_restore(). If copy_from_user() fails, we can simply do fpu_finit() by hand. [ Note: this is only the first step. math_state_restore() should not check used_math(), it should set this flag. While init_fpu() should simply die. ] Signed-off-by:
-
Thierry Reding authored
commit 2f1bce48 upstream. devm_phy_create() stores the pointer to the new PHY at the address returned by devres_alloc(). The res parameter passed to devm_phy_match() is therefore the location where the pointer to the PHY is stored, hence it needs to be dereferenced before comparing to the match data in order to find the correct match. Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
-
Stephan Mueller authored
commit ccfe8c3f upstream. The kernel crypto API logic requires the caller to provide the length of (ciphertext || authentication tag) as cryptlen for the AEAD decryption operation. Thus, the cipher implementation must calculate the size of the plaintext output itself and cannot simply use cryptlen. The RFC4106 GCM decryption operation tries to overwrite cryptlen memory in req->dst. As the destination buffer for decryption only needs to hold the plaintext memory but cryptlen references the input buffer holding (ciphertext || authentication tag), the assumption of the destination buffer length in RFC4106 GCM operation leads to a too large size. This patch simply uses the already calculated plaintext size. In addition, this patch fixes the offset calculation of the AAD buffer pointer: as mentioned before, cryptlen already includes the size of the tag. Thus, the tag does not need to be added. With the addition, the AAD will be written beyond the already allocated buffer. Note, this fixes a kernel crash that can be triggered from user space via AF_ALG(aead) -- simply use the libkcapi test application from [1] and update it to use rfc4106-gcm-aes. Using [1], the changes were tested using CAVS vectors to demonstrate that the crypto operation still delivers the right results. [1] http://www.chronox.de/libkcapi.html CC: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by:
Stephan Mueller <smueller@chronox.de> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
David Dueck authored
commit d0f347d6 upstream. This fixes a potential null pointer dereference. Fixes: d4332013 ("driver core: dev_get_drvdata: Don't check for NULL dev") Acked-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
David Dueck <davidcdueck@googlemail.com> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Takashi Iwai authored
commit b4a18c8b upstream. The correct values referred by a boolean control are value.integer.value[], not value.enumerated.item[]. The former is long while the latter is int, so it's even incompatible on 64bit architectures. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Acked-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Takashi Iwai authored
commit 07892b10 upstream. The correct values referred by a boolean control are value.integer.value[], not value.enumerated.item[]. The former is long while the latter is int, so it's even incompatible on 64bit architectures. Signed-off-by:
-
Takashi Iwai authored
commit eaddf6fd upstream. The correct values referred by a boolean control are value.integer.value[], not value.enumerated.item[]. The former is long while the latter is int, so it's even incompatible on 64bit architectures. Signed-off-by:
-
Takashi Iwai authored
commit 24cc883c upstream. The correct values referred by a boolean control are value.integer.value[], not value.enumerated.item[]. The former is long while the latter is int, so it's even incompatible on 64bit architectures. Signed-off-by:
-
Takashi Iwai authored
commit bd14016f upstream. The correct values referred by a boolean control are value.integer.value[], not value.enumerated.item[]. The former is long while the latter is int, so it's even incompatible on 64bit architectures. Signed-off-by:
-
Takashi Iwai authored
commit 00a14c29 upstream. The correct values referred by a boolean control are value.integer.value[], not value.enumerated.item[]. The former is long while the latter is int, so it's even incompatible on 64bit architectures. Signed-off-by:
-
Takashi Iwai authored
commit 4c523ef6 upstream. The correct values referred by a boolean control are value.integer.value[], not value.enumerated.item[]. The former is long while the latter is int, so it's even incompatible on 64bit architectures. Signed-off-by:
-
Takashi Iwai authored
commit d7f58db4 upstream. The correct values referred by a boolean control are value.integer.value[], not value.enumerated.item[]. The former is long while the latter is int, so it's even incompatible on 64bit architectures. Signed-off-by:
-
Takashi Iwai authored
commit e8371aa0 upstream. The correct values referred by a boolean control are value.integer.value[], not value.enumerated.item[]. The former is long while the latter is int, so it's even incompatible on 64bit architectures. Signed-off-by:
Paul Handrigan <Paul.Handrigan@cirrus.com> Signed-off-by:
-
Takashi Iwai authored
commit 08641d9b upstream. The correct values referred by a boolean control are value.integer.value[], not value.enumerated.item[]. The former is long while the latter is int, so it's even incompatible on 64bit architectures. Signed-off-by:
-
Takashi Iwai authored
commit 2bf4c1d4 upstream. The correct values referred by a boolean control are value.integer.value[], not value.enumerated.item[]. The former is long while the latter is int, so it's even incompatible on 64bit architectures. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Andy Lutomirski authored
commit 394838c9 upstream. The one in do_debug() is probably harmless, but better safe than sorry. Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/d67deaa9df5458363623001f252d1aee3215d014.1425948056.git.luto@amacapital.netSigned-off-by:
-
Malcolm Priestley authored
commit 40c8790b upstream. When the driver sets this rate a power of zero value is set causing data flow stoppage until another rate is tried. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Benjamin Tissoires authored
commit b57a7128 upstream. The board id capability has been added in firmware 7.5. Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Benjamin Tissoires authored
commit ebc80840 upstream. The Fimware 8.1 has a bug in which the extra buttons are only sent when the ExtBit is 1. This should be fixed in a future FW update which should have a bump of the minor version. Signed-off-by:
-
Dmitry Torokhov authored
commit dc5465dc upstream. On the X1 Carbon 3rd gen (with a 2015 broadwell cpu), the physical middle button of the trackstick (attached to the touchpad serio device, of course) seems to get lost. Actually, the touchpads reports 3 extra buttons, which falls in the switch below to the '2' case. Let's handle the case of odd numbers also, so that the middle button finds its way back. Signed-off-by:
-
Benjamin Tissoires authored
commit 02e07492 upstream. Post-2013 Lenovo laptops provide correct min/max dimensions, which are different with the ones currently quirked. According to https://bugzilla.kernel.org/show_bug.cgi?id=91541 the following board ids are assigned in the post-2013 touchpads: t440p/t440s: LEN0036 -> 2964/2962 t540p: LEN0034 -> 2964 Using 2961 as the common minimum makes these 3 laptops OK. We may need to update those values later if other pnp_ids has a lower board_id. Signed-off-by:
-
Daniel Martin authored
commit 5b3089dd upstream. Add a min/max range for board ids to the min/max coordinates quirk. This makes it possible to restrict quirks to specific models based upon their board id. The define ANY_BOARD_ID (0) serves as a wild card. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=91541Signed-off-by:
Daniel Martin <daniel.martin@secunet.com> Acked-by:
-
Daniel Martin authored
commit b05f4d1c upstream. The firmware of the X240 (LEN0035, 2013/12) exposes the same values x [1232..5710], y [1156..4696] as the quirk applies. Signed-off-by:
Daniel Martin <consume.noise@gmail.com> Acked-by:
-
Daniel Martin authored
commit ac097930 upstream. Query the min dimensions even if the check SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 7 fails, but we know that the firmware version 8.1 is safe. With that we don't need quirks for post-2013 models anymore as they expose correct min and max dimensions. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=91541Signed-off-by:
-
Daniel Martin authored
commit 9aff6598 upstream. Logging the dimension values we queried and the values we use from a quirk to overwrite can be helpful for debugging. This partly relates to bug: https://bugzilla.kernel.org/show_bug.cgi?id=91541Signed-off-by:
-
Daniel Martin authored
commit 8b04baba upstream. Split the function synaptics_resolution() into synaptics_resolution() and synaptics_quirks(). synaptics_resolution() will be called before synaptics_quirks() to query dimensions and resolutions before overwriting them with quirks. Signed-off-by:
-
Hans de Goede authored
commit 2c75ada6 upstream. The matches_pnp_id function from the synaptics driver is useful for other drivers too. Make it a generic psmouse helper function. Signed-off-by:
-
Doug Anderson authored
commit 29d62ec5 upstream. Normally _regulator_do_enable() isn't called on an already-enabled rdev. That's because the main caller, _regulator_enable() always calls _regulator_is_enabled() and only calls _regulator_do_enable() if the rdev was not already enabled. However, there is one caller of _regulator_do_enable() that doesn't check: regulator_suspend_finish(). While we might want to make regulator_suspend_finish() behave more like _regulator_enable(), it's probably also a good idea to make _regulator_do_enable() robust if it is called on an already enabled rdev. At the moment, _regulator_do_enable() is _not_ robust for already enabled rdevs if we're using an ena_pin. Each time _regulator_do_enable() is called for an rdev using an ena_pin the reference count of the ena_pin is incremented even if the rdev was already enabled. This is not as intended because the ena_pin is for something else: for keeping track of how many active rdevs there are sharing the same ena_pin. Here's how the reference counting works here: * Each time _regulator_enable() is called we increment rdev->use_count, so _regulator_enable() calls need to be balanced with _regulator_disable() calls. * There is no explicit reference counting in _regulator_do_enable() which is normally just a warapper around rdev->desc->ops->enable() with code for supporting delays. It's not expected that the "ops->enable()" call do reference counting. * Since regulator_ena_gpio_ctrl() does have reference counting (handling the sharing of the pin amongst multiple rdevs), we shouldn't call it if the current rdev is already enabled. Note that as part of this we cleanup (remove) the initting of ena_gpio_state in regulator_register(). In _regulator_do_enable(), _regulator_do_disable() and _regulator_is_enabled() is is clear that ena_gpio_state should be the state of whether this particular rdev has requested the GPIO be enabled. regulator_register() was initting it as the actual state of the pin. Fixes: 967cfb18 ("regulator: core: manage enable GPIO list") Signed-off-by:
Doug Anderson <dianders@chromium.org> Signed-off-by:
-
Javier Martinez Canillas authored
commit 0548bf4f upstream. The _regulator_do_enable() call ought to be a no-op when called on an already-enabled regulator. However, as an optimization _regulator_enable() doesn't call _regulator_do_enable() on an already enabled regulator. That means we never test the case of calling _regulator_do_enable() during normal usage and there may be hidden bugs or warnings. We have seen warnings issued by the tps65090 driver and bugs when using the GPIO enable pin. Let's match the same optimization that _regulator_enable() in regulator_suspend_finish(). That may speed up suspend/resume and also avoids exposing hidden bugs. [Use much clearer commit message from Doug Anderson] Signed-off-by:
Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by:
-
Lars-Peter Clausen authored
commit 328f494d upstream. When inserting a new register into a block at the lower end the present bitmap is currently shifted into the wrong direction. The effect of this is that the bitmap becomes corrupted and registers which are present might be reported as not present and vice versa. Fix this by shifting left rather than right. Fixes: 472fdec7("regmap: rbtree: Reduce number of nodes, take 2") Reported-by:
Daniel Baluta <daniel.baluta@gmail.com> Signed-off-by:
-
Eric Nelson authored
commit c7d910b8 upstream. The SGTL5000_CHIP_ANA_POWER register is cached. Update the cached value instead of writing it directly. Patch inspired by Russell King's more colorful remarks in this patch: https://github.com/SolidRun/linux-imx6-3.14/commit/dd4bf6aSigned-off-by:
Eric Nelson <eric.nelson@boundarydevices.com> Signed-off-by:
-
Jiri Slaby authored
commit e8932869 upstream. On gcc5 the kernel does not link: ld: .eh_frame_hdr table[4] FDE at 0000000000000648 overlaps table[5] FDE at 0000000000000670. Because prior GCC versions always emitted NOPs on ALIGN directives, but gcc5 started omitting them. .LSTARTFDEDLSI1 says: /* HACK: The dwarf2 unwind routines will subtract 1 from the return address to get an address in the middle of the presumed call instruction. Since we didn't get here via a call, we need to include the nop before the real start to make up for it. */ .long .LSTART_sigreturn-1-. /* PC-relative start address */ But commit 69d0627a ("x86 vDSO: reorder vdso32 code") from 2.6.25 replaced .org __kernel_vsyscall+32,0x90 by ALIGN right before __kernel_sigreturn. Of course, ALIGN need not generate any NOP in there. Esp. gcc5 collapses vclock_gettime.o and int80.o together with no generated NOPs as "ALIGN". So fix this by adding to that point at least a single NOP and make the function ALIGN possibly with more NOPs then. Kudos for reporting and diagnosing should go to Richard. Reported-by:
Richard Biener <rguenther@suse.de> Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Acked-by:
-
Yongbae Park authored
commit 1096be08 upstream. The interrupt is enabled before the handler is set. Even this bug did not appear, it is potentially dangerous as it can lead to a NULL pointer dereference. Fix the error by enabling the interrupt after clockevents_config_and_register() is called. Signed-off-by:
Yongbae Park <yongbae2@gmail.com> Signed-off-by:
-
Yongbae Park authored
commit 7b8f10da upstream. The initialisation of the efm32 clocksource first sets up the irq and only after that initialises the data needed for irq handling. In case this initialisation is delayed the irq handler would dereference a NULL pointer. I'm not aware of anything that could delay the process in such a way, but it's better to be safe than sorry, so setup the irq only when the clock event device is ready. Acked-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Michael S. Tsirkin authored
commit eeb8a7e8 upstream. when multiport is off, virtio console invokes config access from irq context, config access is blocking on s390. Fix this up by scheduling work from config irq - similar to what we do for multiport configs. Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Reviewed-by:
Amit Shah <amit.shah@redhat.com> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Michael S. Tsirkin authored
commit 4f6e24ed upstream. when multiport is off, we don't initialize config work, but we then cancel uninitialized control_work on freeze. Signed-off-by:
-
Lars-Peter Clausen authored
commit cdd3d2a9 upstream. Routes without a control must use NULL for the control name. The sn95031 driver uses "NULL" instead in a few places. Previous to commit 5fe5b767 ("ASoC: dapm: Do not pretend to support controls for non mixer/mux widgets") the DAPM core silently ignored non-NULL controls on non-mixer and non-mux routes. But starting with that commit it will complain and not add the route breaking the sn95031 driver in the process. This patch replaces the incorrect "NULL" control name with NULL to fix the issue. Fixes: 5fe5b767 ("ASoC: dapm: Do not pretend to support controls for non mixer/mux widgets") Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Lars-Peter Clausen authored
commit 8e6a75c1 upstream. Routes without a control must use NULL for the control name. The da732x driver uses "NULL" instead in a few places. Previous to commit 5fe5b767 ("ASoC: dapm: Do not pretend to support controls for non mixer/mux widgets") the DAPM core silently ignored non-NULL controls on non-mixer and non-mux routes. But starting with that commit it will complain and not add the route breaking the da732x driver in the process. This patch replaces the incorrect "NULL" control name with NULL to fix the issue. Fixes: 5fe5b767 ("ASoC: dapm: Do not pretend to support controls for non mixer/mux widgets") Signed-off-by:
Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by:
-
