Smatch reports this issue
sr9800.h:166:53: warning: symbol 'SR9800_BULKIN_SIZE' was not declared. Should it be static?

Global variables should not be defined in header files.
This only works because sr9800.h in only included by sr9800.c
Change the storage-class specifier to static.
And since it does not change add type qualifier const.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit b6177d32

ip-link command is testing kernel capability by sending a RTM_NEWLINK
request, without any argument. It accepts everything in reply, except
EOPNOTSUPP and EINVAL (functions iplink_have_newlink / accept_msg)

So we must keep compatiblity here, invalid empty message should not
return EINVAL
Signed-off-by: Florent Fourcot <florent.fourcot@wifirst.fr>
Tested-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The NFP driver already supports assignment of 802.1Q VLANs to VFs

e.g.
 # ip link set $DEV vf $VF_NUM vlan $VLAN_ID [proto 802.1Q]

This patch enhances the NFP driver to also allow assingment of
802.1ad VLANs to VFs.

e.g.
 # ip link set $DEV vf $VF_NUM vlan $VLAN_ID proto 802.1ad
Signed-off-by: Bin Chen <bin.chen@corigine.com>
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Yinjun Zhang <yunjin.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync and
pm_runtime_put_noidle. This change is just to simplify the code, no
actual functional changes.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix mistake in the original patch where limits were specified but the
handler didn't take care of the limits.
Signed-off-by: Arun Ajith S <aajith@arista.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Variable status is being assigned a value that is never read, it is
being re-assigned again later on. The assignment is redundant and can
be removed.

Cleans up clang scan build warning:
drivers/net/ethernet/myricom/myri10ge/myri10ge.c:582:7: warning: Although
the value stored to 'status' is used in the enclosing expression, the
value is never actually read from 'status' [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It is unnecessary to call spin_lock_bh() for you are already in a tasklet.
Signed-off-by: Yunbo Yu <yuyunbo519@gmail.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/microchip/lan966x/lan966x_main.c
  d08ed852 ("net: lan966x: Make sure to release ptp interrupt")
  c8349639 ("net: lan966x: Add FDMA functionality")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Pull networking fixes from Paolo Abeni:
 "Including fixes from xfrm and can.

  Current release - regressions:

   - rxrpc: restore removed timer deletion

  Current release - new code bugs:

   - gre: fix device lookup for l3mdev use-case

   - xfrm: fix egress device lookup for l3mdev use-case

  Previous releases - regressions:

   - sched: cls_u32: fix netns refcount changes in u32_change()

   - smc: fix sock leak when release after smc_shutdown()

   - xfrm: limit skb_page_frag_refill use to a single page

   - eth: atlantic: invert deep par in pm functions, preventing null
     derefs

   - eth: stmmac: use readl_poll_timeout_atomic() in atomic state

  Previous releases - always broken:

   - gre: fix skb_under_panic on xmit

   - openvswitch: fix OOB access in reserve_sfa_size()

   - dsa: hellcreek: calculate checksums in tagger

   - eth: ice: fix crash in switchdev mode

   - eth: igc:
      - fix infinite loop in release_swfw_sync
      - fix scheduling while atomic"

* tag 'net-5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (37 commits)
  drivers: net: hippi: Fix deadlock in rr_close()
  selftests: mlxsw: vxlan_flooding_ipv6: Prevent flooding of unwanted packets
  selftests: mlxsw: vxlan_flooding: Prevent flooding of unwanted packets
  nfc: MAINTAINERS: add Bug entry
  net: stmmac: Use readl_poll_timeout_atomic() in atomic state
  doc/ip-sysctl: add bc_forwarding
  netlink: reset network and mac headers in netlink_dump()
  net: mscc: ocelot: fix broken IP multicast flooding
  net: dsa: hellcreek: Calculate checksums in tagger
  net: atlantic: invert deep par in pm functions, preventing null derefs
  can: isotp: stop timeout monitoring when no first frame was sent
  bonding: do not discard lowest hash bit for non layer3+4 hashing
  net: lan966x: Make sure to release ptp interrupt
  ipv6: make ip6_rt_gc_expire an atomic_t
  net: Handle l3mdev in ip_tunnel_init_flow
  l3mdev: l3mdev_master_upper_ifindex_by_index_rcu should be using netdev_master_upper_dev_get_rcu
  net/sched: cls_u32: fix possible leak in u32_init_knode()
  net/sched: cls_u32: fix netns refcount changes in u32_change()
  powerpc: Update MAINTAINERS for ibmvnic and VAS
  net: restore alpha order to Ethernet devices in config
  ...

Use kzalloc rather than duplicating its implementation, which
makes code simple and easy to understand.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Link: https://lore.kernel.org/r/1650277333-31090-1-git-send-email-baihaowen@meizu.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Using pm_runtime_resume_and_get is more appropriate
for simplifing code
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Link: https://lore.kernel.org/r/20220418062921.2557884-1-chi.minghao@zte.com.cnSigned-off-by: Paolo Abeni <pabeni@redhat.com>

There is a deadlock in rr_close(), which is shown below:

   (Thread 1)                |      (Thread 2)
                             | rr_open()
rr_close()                   |  add_timer()
 spin_lock_irqsave() //(1)   |  (wait a time)
 ...                         | rr_timer()
 del_timer_sync()            |  spin_lock_irqsave() //(2)
 (wait timer to stop)        |  ...

We hold rrpriv->lock in position (1) of thread 1 and
use del_timer_sync() to wait timer to stop, but timer handler
also need rrpriv->lock in position (2) of thread 2.
As a result, rr_close() will block forever.

This patch extracts del_timer_sync() from the protection of
spin_lock_irqsave(), which could let timer handler to obtain
the needed lock.
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220417125519.82618-1-duoming@zju.edu.cnSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Pull xtensa fixes from Max Filippov:

 - fix patching CPU selection in patch_text

 - fix potential deadlock in ISS platform serial driver

 - fix potential register clobbering in coprocessor exception handler

* tag 'xtensa-20220416' of https://github.com/jcmvbkbc/linux-xtensa:
  xtensa: fix a7 clobbering in coprocessor context load/store
  arch: xtensa: platforms: Fix deadlock in rs_close()
  xtensa: patch_text: Fixup last cpu should be master

Pull erofs fixes from Gao Xiang:
 "One patch to fix a use-after-free race related to the on-stack
  z_erofs_decompressqueue, which happens very rarely but needs to be
  fixed properly soon.

  The other patch fixes some sysfs Sphinx warnings"

* tag 'erofs-for-5.18-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  Documentation/ABI: sysfs-fs-erofs: Fix Sphinx errors
  erofs: fix use-after-free of on-stack io[]

This reverts commit 5a519c8f.

It turns out that making the pipe almost arbitrarily large has some
rather unexpected downsides.  The kernel test robot reports a kernel
warning that is due to pipe->max_usage now growing to the point where
the iter_file_splice_write() buffer allocation can no longer be
satisfied as a slab allocation, and the

        int nbufs = pipe->max_usage;
        struct bio_vec *array = kcalloc(nbufs, sizeof(struct bio_vec),
                                        GFP_KERNEL);

code sequence there will now always fail as a result.

That code could be modified to use kvcalloc() too, but I feel very
uncomfortable making those kinds of changes for a very niche use case
that really should have other options than make these kinds of
fundamental changes to pipe behavior.

Maybe the CRIU process dumping should be multi-threaded, and use
multiple pipes and multiple cores, rather than try to use one larger
pipe to minimize splice() calls.
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/all/20220420073717.GD16310@xsang-OptiPlex-9020/
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The first "if" condition in __memcpy_flushcache is supposed to align the
"dest" variable to 8 bytes and copy data up to this alignment.  However,
this condition may misbehave if "size" is greater than 4GiB.

The statement min_t(unsigned, size, ALIGN(dest, 8) - dest); casts both
arguments to unsigned int and selects the smaller one.  However, the
cast truncates high bits in "size" and it results in misbehavior.

For example:

	suppose that size == 0x100000001, dest == 0x200000002
	min_t(unsigned, size, ALIGN(dest, 8) - dest) == min_t(0x1, 0xe) == 0x1;
	...
	dest += 0x1;

so we copy just one byte "and" dest remains unaligned.

This patch fixes the bug by replacing unsigned with size_t.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The test verifies that packets are correctly flooded by the bridge and
the VXLAN device by matching on the encapsulated packets at the other
end. However, if packets other than those generated by the test also
ingress the bridge (e.g., MLD packets), they will be flooded as well and
interfere with the expected count.

Make the test more robust by making sure that only the packets generated
by the test can ingress the bridge. Drop all the rest using tc filters
on the egress of 'br0' and 'h1'.

In the software data path, the problem can be solved by matching on the
inner destination MAC or dropping unwanted packets at the egress of the
VXLAN device, but this is not currently supported by mlxsw.

Fixes: d01724dd ("selftests: mlxsw: spectrum-2: Add a test for VxLAN flooding with IPv6")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The test verifies that packets are correctly flooded by the bridge and
the VXLAN device by matching on the encapsulated packets at the other
end. However, if packets other than those generated by the test also
ingress the bridge (e.g., MLD packets), they will be flooded as well and
interfere with the expected count.

Make the test more robust by making sure that only the packets generated
by the test can ingress the bridge. Drop all the rest using tc filters
on the egress of 'br0' and 'h1'.

In the software data path, the problem can be solved by matching on the
inner destination MAC or dropping unwanted packets at the egress of the
VXLAN device, but this is not currently supported by mlxsw.

Fixes: 94d302de ("selftests: mlxsw: Add a test for VxLAN flooding")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says:

====================
mlxsw: Line cards status tracking

When a line card is provisioned, netdevs corresponding to the ports
found on the line card are registered. User space can then perform
various logical configurations (e.g., splitting, setting MTU) on these
netdevs.

However, since the line card is not present / powered on (i.e., it is
not in 'active' state), user space cannot access the various components
found on the line card. For example, user space cannot read the
temperature of gearboxes or transceiver modules found on the line card
via hwmon / thermal. Similarly, it cannot dump the EEPROM contents of
these transceiver modules. The above is only possible when the line card
becomes active.

This patchset solves the problem by tracking the status of each line
card and invoking callbacks from interested parties when a line card
becomes active / inactive.

Patchset overview:

Patch #1 adds the infrastructure in the line cards core that allows
users to registers a set of callbacks that are invoked when a line card
becomes active / inactive. To avoid races, if a line card is already
active during registration, the got_active() callback is invoked.

Patches #2-#3 are preparations.

Patch #4 changes the port module core to register a set of callbacks
with the line cards core. See detailed description with examples in the
commit message.

Patches #5-#6 do the same with regards to thermal / hwmon support, so
that user space will be able to monitor the temperature of various
components on the line card when it becomes active.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add callback functions for line card 'hwmon' initialization and
de-initialization. Each line card is associated with the relevant
'hwmon' device, which may contain thermal attributes for the cages
and gearboxes found on this line card.

The line card 'hwmon' initialization / de-initialization APIs are to be
called when line card is set to active / inactive state by
got_active() / got_inactive() callbacks from line card state machine.

For example cage temperature for module #9 located at line card #7 will
be exposed by utility 'sensors' like:
linecard#07
front panel 009:	+32.0C  (crit = +70.0C, emerg = +80.0C)
And temperature for gearbox #3 located at line card #5 will be exposed
like:
linecard#05
gearbox 003:		+41.0C  (highest = +41.0C)
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add callback functions for line card thermal area initialization and
de-initialization. Each line card is associated with the relevant
thermal area, which may contain thermal zones for cages and gearboxes
found on this line card.

The line card thermal initialization / de-initialization APIs are to be
called when line card is set to active / inactive state by
got_active() / got_inactive() callbacks from line card state machine.

For example thermal zone for module #9 located at line card #7 will
have type:
mlxsw-lc7-module9.
And thermal zone for gearbox #2 located at line card #5 will have type:
mlxsw-lc5-gearbox2.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Netdevs for ports found on line cards are registered upon provisioning.
However, user space is not allowed to access the transceiver modules
found on a line card until the line card becomes active.

Therefore, register event operations with the line card core to get
notifications whenever a line card becomes active or inactive.

When user space tries to dump the EEPROM of a transceiver module or reset
it and the corresponding line card is inactive, emit an error
message:
ethtool -m enp1s0nl7p9
netlink error: mlxsw_core: Cannot read EEPROM of module on an inactive line card
netlink error: Input/output error

When user space tries to set the power mode policy of such a transceiver,
cache the configuration and apply it when the line card becomes active. This
is consistent with other port configuration (e.g., MTU setting) that user space
is able to perform while the line card is provisioned, but inactive.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move the code that applies the module power mode to the device to a
separate function. This function will be invoked by the next patch to
set the power mode on transceiver modules found on a line card when the
line card becomes active.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pass bus argument to mlxsw_env_init(). The purpose is to get access to
device handle, which is to be provided to error message in case of line
card activation failure.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduce an infrastructure allowing users to register a set
of operations which are to be called whenever a line card gets
active/inactive.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a Bug section, indicating preferred mailing method for bug reports,
to NFC Subsystem entry.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'linux-can-next-for-5.19-20220419' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2022-04-19

this is a pull request of 17 patches for net-next/master.

The first 2 patches are by me and target the CAN driver
infrastructure. One patch renames a function in the rx_offload helper
the other one updates the CAN bitrate calculation to prefer small bit
rate pre-scalers over larger ones, which is encouraged by the CAN in
Automation.

Kris Bahnsen contributes a patch to fix the links to Technologic
Systems web resources in the sja1000 driver.

Christophe Leroy's patch prepares the mpc5xxx_can driver for upcoming
powerpc header cleanup.

Minghao Chi's patch converts the flexcan driver to use
pm_runtime_resume_and_get().

The next 2 patches target the Xilinx CAN driver. Lukas Bulwahn's patch
fixes an entry in the MAINTAINERS file. A patch by me marks the bit
timing constants as const.

Wolfram Sang's patch documents r8a77961 support on the
renesas,rcar-canfd bindings document.

The next 2 patches are by me and add support for the mcp251863 chip to
the mcp251xfd driver.

The last 7 patches are by Pavel Pisa, Martin Jerabek et al. and add
the ctucanfd driver for the CTU CAN FD IP Core.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The init_systime() may be invoked in atomic state. We have observed the
following call trace when running "phc_ctl /dev/ptp0 set" on a Intel
Agilex board.
  BUG: sleeping function called from invalid context at drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c:74
  in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 381, name: phc_ctl
  preempt_count: 1, expected: 0
  RCU nest depth: 0, expected: 0
  Preemption disabled at:
  [<ffff80000892ef78>] stmmac_set_time+0x34/0x8c
  CPU: 2 PID: 381 Comm: phc_ctl Not tainted 5.18.0-rc2-next-20220414-yocto-standard+ #567
  Hardware name: SoCFPGA Agilex SoCDK (DT)
  Call trace:
   dump_backtrace.part.0+0xc4/0xd0
   show_stack+0x24/0x40
   dump_stack_lvl+0x7c/0xa0
   dump_stack+0x18/0x34
   __might_resched+0x154/0x1c0
   __might_sleep+0x58/0x90
   init_systime+0x78/0x120
   stmmac_set_time+0x64/0x8c
   ptp_clock_settime+0x60/0x9c
   pc_clock_settime+0x6c/0xc0
   __arm64_sys_clock_settime+0x88/0xf0
   invoke_syscall+0x5c/0x130
   el0_svc_common.constprop.0+0x4c/0x100
   do_el0_svc+0x7c/0xa0
   el0_svc+0x58/0xcc
   el0t_64_sync_handler+0xa4/0x130
   el0t_64_sync+0x18c/0x190

So we should use readl_poll_timeout_atomic() here instead of
readl_poll_timeout().

Also adjust the delay time to 10us to fix a "__bad_udelay" build error
reported by "kernel test robot <lkp@intel.com>". I have tested this on
Intel Agilex and NXP S32G boards, there is no delay needed at all.
So the 10us delay should be long enough for most cases.

Fixes: ff8ed737 ("net: stmmac: use readl_poll_timeout() function in init_systime()")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Boris Sukholitko says:

====================
net/sched: flower: match on the number of vlan tags

Our customers in the fiber telecom world have network configurations
where they would like to control their traffic according to the number
of tags appearing in the packet.

For example, TR247 GPON conformance test suite specification mostly
talks about untagged, single, double tagged packets and gives lax
guidelines on the vlan protocol vs. number of vlan tags.

This is different from the common IT networks where 802.1Q and 802.1ad
protocols are usually describe single and double tagged packet. GPON
configurations that we work with have arbitrary mix the above protocols
and number of vlan tags in the packet.

The following patch series implement number of vlans flower filter. They
add num_of_vlans flower filter as an alternative to vlan ethtype protocol
matching. The end result is that the following command becomes possible:

tc filter add dev eth1 ingress flower \
  num_of_vlans 1 vlan_prio 5 action drop

Also, from our logs, we have redirect rules such that:

tc filter add dev $GPON ingress flower num_of_vlans $N \
     action mirred egress redirect dev $DEV

where N can range from 0 to 3 and $DEV is the function of $N.

Also there are rules setting skb mark based on the number of vlans:

tc filter add dev $GPON ingress flower num_of_vlans $N vlan_prio \
    $P action skbedit mark $M

More about the patch series:
  - patches 1-2 remove duplicate code by introducing is_key_vlan
    helper.
  - patch 3, 4 implement num_of_vlans in the dissector and in the
    flower.
  - patch 5 uses the num_of_vlans filter to allow further matching on
    vlan attributes.

Complementary iproute2 patches are being sent separately.

Thanks,
Boris.

- v4: rebased to the latest net-next
- v3:
    - more example commands in patch 3 description (request by Jamal)
    - patch 5 description made clearer (thanks to Jiri)
- v2:
    - add suitable subject prefixes
    - more evolved patch 5 description
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Before this patch the existence of vlan filters was conditional on the vlan
protocol being matched in the tc rule. For example, the following rule:

tc filter add dev eth1 ingress flower vlan_prio 5

was illegal because vlan protocol (e.g. 802.1q) does not appear in the rule.

Remove the above restriction by looking at the num_of_vlans filter to
allow further matching on vlan attributes. The following rule becomes
legal as a result of this commit:

tc filter add dev eth1 ingress flower num_of_vlans 1 vlan_prio 5

because having num_of_vlans==1 implies that the packet is single tagged.

Change is_vlan_key helper to look at the number of vlans in addition to
the vlan ethertype. The outcome of this change is that outer (e.g. vlan_prio)
and inner (e.g. cvlan_prio) tag vlan filters require the number of vlan
tags to be greater then 0 and 1 accordingly.

As a result of is_vlan_key change, the ethertype may be set to 0 when
matching on the number of vlans. Update fl_set_key_vlan to avoid setting
key, mask vlan_tpid for the 0 ethertype.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

These are bookkeeping parts of the new num_of_vlans filter.
Defines, dump, load and set are being done here.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Our customers in the fiber telecom world have network configurations
where they would like to control their traffic according to the number
of tags appearing in the packet.

For example, TR247 GPON conformance test suite specification mostly
talks about untagged, single, double tagged packets and gives lax
guidelines on the vlan protocol vs. number of vlan tags.

This is different from the common IT networks where 802.1Q and 802.1ad
protocols are usually describe single and double tagged packet. GPON
configurations that we work with have arbitrary mix the above protocols
and number of vlan tags in the packet.

The goal is to make the following TC commands possible:

tc filter add dev eth1 ingress flower \
  num_of_vlans 1 vlan_prio 5 action drop

From our logs, we have redirect rules such that:

tc filter add dev $GPON ingress flower num_of_vlans $N \
     action mirred egress redirect dev $DEV

where N can range from 0 to 3 and $DEV is the function of $N.

Also there are rules setting skb mark based on the number of vlans:

tc filter add dev $GPON ingress flower num_of_vlans $N vlan_prio \
    $P action skbedit mark $M

This new dissector allows extracting the number of vlan tags existing in
the packet.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Whitespace only.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are somewhat repetitive ethertype checks in fl_set_key. Refactor
them into is_vlan_key helper function.

To make the changes clearer, avoid touching identation levels. This is
the job for the next patch in the series.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use kzalloc rather than duplicating its implementation, which
makes code simple and easy to understand.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is no need to add new compatible strings for each new supported
chip version. The compatible string is used only to select the subdriver
(rtl8365mb.c or rtl8366rb.c). Once in the subdriver, it will detect the
chip model by itself, ignoring which compatible string was used.

Link: https://lore.kernel.org/netdev/20220414014055.m4wbmr7tdz6hsa3m@bang-olufsen.dk/Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Compatible strings are used to help the driver find the chip ID/version
register for each chip family. After that, the driver can setup the
switch accordingly. Keep only the first supported model for each family
as a compatible string and reference other chip models in the
description.

The removed compatible strings have never been used in a released kernel.

CC: devicetree@vger.kernel.org
Link: https://lore.kernel.org/netdev/20220414014055.m4wbmr7tdz6hsa3m@bang-olufsen.dk/Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Guangbin Huang says:

====================
net: hns3: updates for -next

This series includes some updates for the HNS3 ethernet driver.

Change logs:
V1 -> V2:
 - Fix failed to apply to net-next problem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove unnecessary line wrap for hns3_set_tunable to improve
function readability.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Magic values are not recommended.

Signed-off-by: Peng Li<lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>