Cleanup patch to remove 'txq_spinlock_flags' element in 'wilc' and used
local variable 'flag' in wilc_wlan_txq_filter_dup_tcp_ack().
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removed unnecessary 'rxq_entries' element from 'wilc' struct, as its
value is not used.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Make use of 'list_head' data structure to maintain the rx buffer queue.
Modified wilc_wlan_rxq_add() to add the element at the tail by using
list_head API and wilc_wlan_rxq_remove() to remove the element from
head.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use list_head data structure for the doubly linked list instead of own
implementation.
Only 'txq_head' is required, so removed the txq_tail pointer from
'wilc' structure.

Following functions are modified to provide data using list_head API's
wilc_wlan_txq_remove()
wilc_wlan_txq_remove_from_head()
wilc_wlan_txq_add_to_tail()
wilc_wlan_txq_add_to_head()
wilc_wlan_txq_get_first()
wilc_wlan_txq_get_next()
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

match_string() returns the index of an array for a matching string,
which can be used instead of open coded variant.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Quytelda Kahja <quytelda@tamalin.org>
Cc: devel@driverdev.osuosl.org
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If rtsx_probe() fails to allocate dev->chip, then release_everything()
will crash on uninitialized dev->cmnd_ready complete.

Patch adds error handling into rtsx_probe.

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes the checkpatch warning:

WARNING: prefer 'help' over '---help---' for new help texts
+config COMMON_CLK_XLNX_CLKWZRD
Signed-off-by: Kyle Buzby <kyle.buzby@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Clean up W=1 warning: variable set but not used.
Signed-off-by: Kenneth Lu <kuohsianglu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unneccessary parentheses, and removed unnecessary (void *) cast
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change comparison to NULL to better adhere to coding standard.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Declaration of function was spread over three lines.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Function HTIOTActIsDisableMCS14 contained spurious space at start of line.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Function HTIOTPeerDetermine used incorrect indentation in if statements.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Return statments from void functions are not required by the coding standard.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Added spaces around various operators, as preferred by coding style.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Simple addition & removal of blank lines as required
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In the PI433_IOC_WR_TX_CFG case in pi433_ioctl, instance->tx_cfg is
modified via

copy_from_user(&instance->tx_cfg, argp, sizeof(struct pi433_tx_cfg)))

without any kind of synchronization. In the case where two threads
would execute this same command concurrently the tx_cfg field might
enter in an inconsistent state.

Additionally: if ioctl(PI433_IOC_WR_TX_CFG) and write() execute
concurrently the tx config might be modified while it is being
copied to the fifo, resulting in potential data corruption.

Fix: Get instance->tx_cfg_lock before modifying tx config in the
PI433_IOC_WR_TX_CFG case in pi433_ioctl.

Also, do not copy data directly from user space to instance->tx_cfg.
Instead use a temporary buffer allowing future checks for correctness
of copied data and simpler code.
Signed-off-by: Hugo Lefeuvre <hle@owl.eu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes space after * to fix the following checkpatch error:

ERROR: "foo * bar" should be "foo *bar"
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The patch fixes following checkpatch.pl issue:
WARNING : braces {} are not necessary for single statement blocks
Signed-off-by: Sankalp Negi <sankalpnegi2310@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The patch fixes following checkpatch.pl issue:
ERROR : space required before the open parenthesis
Signed-off-by: Sankalp Negi <sankalpnegi2310@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The patch fixes following checkpatch.pl issue:
ERROR : code indent should use tabs where possible
Signed-off-by: Sankalp Negi <sankalpnegi2310@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The patch fixes following checkpatch.pl issue:
WARNING : line over 80 characters
Signed-off-by: Sankalp Negi <sankalpnegi2310@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The patch fixes following checkpatch.pl issue:
ERROR : switch and case should be at the same indent
Signed-off-by: Sankalp Negi <sankalpnegi2310@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Now that gpio-interrupts work correctly, we
can use gpio-keys instead of gpio-keys-polled
for the single push-button on the gbpc-1.
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The MT7621 documentation says that the sys clock - also known
as OCP clock for the Open Core Protocol - can be configured to
1/3 or 1/4 of the CPU clock.
Testing on my hardware, using the fact that the SPI clock is
based on the OCP clock and measuring transfer rates, shows
a clock of a little over 200MHz with a CPU clock of 900MHz.
So assume 1/4 is the default.

Also, the nor-flash in the gbpc1 is documented as accepting 50MHz
for request requests, and higher for other requests.  So set
maximum to 50MHz.
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The mt7621 SPI engine has a 32 byte buffer and the driver
currently only allows 32-byte read requests and 36 bytes writes
(there is a 4byte op/addr buffer).

This is an unnecessary limitation.  As the SPI clock is controlled
by the host it is quite acceptable to send a larger message in
multiple smaller transactions.  As long as Chip Select is kept asserted
the whole time, the SPI engine can be run multiple times for
a single SPI message.

This patch factors out the transaction logic and calls for each
transfer in the message.  A write transfer might leave bytes in the
buffer to be combined with a following read transfer, as this is
a common pattern.

With this in place, we can remove the current max_transfer_size limit.

In testing, this increases the read throughput for a NOR flash chip
from 1.4MB/s to 2.3MB/s, a 50% improvement.
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

All callers have a 'struct mt7621_spi' and that is all
mt7621_spi_wait_till_ready() needs.  So just pass it
instead of the spi_device.
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver currently has internal knowledge ofthe address
of system-control registers and accesses them by dereferencing
a constant pointer.

It is cleaner to use rt_sysc_r32(), rt_sysc_w32(), rt_sysc_m32()
which is a more standard interface.
So change the defined names to offsets instead of pointers,
and use these functions.
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The synths[] array is a collection of synths acting like a list.
There is no need for synths to be an array, so refactor synths[] to use
standard kernel list_head API, instead, and modify the usages to suit.
As a side-effect, the maximum number of synths has also become redundant.
Signed-off-by: Justin Skists <justin.skists@juzza.co.uk>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Improve readability of comedi_nsamples_left:
a) Reduce nesting by using more return statements.
b) Declare variables scans_left and samples_left at start of function.
c) Change type of scans_Left to unsigned long long to avoid cast.
Signed-off-by: Chris Opperman <eklikeroomys@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Checkpatch.pl complains about packbits function pointer that lacks
parameters name.

Add parameter names to packbits function pointer.
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Checkpatch.pl complains about "quoted string split across lines" for
string in MODULE_DESCRIPTION().

Put string on only one line.
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Checkpatch complains on bool bitfields to be an int or u8/u16/u32
bitfield.

Make bool bit-fields to be unsigned int bit-fields.
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Checkpatch complains on bool bitfields to be an int or u8/u16/u32
bitfield.

Make bool bit-fields to be unsigned int bit-fields.
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Checkpatch complains on bool bitfields to be an int or u8/u16/u32
bitfield.

Make bool bit-fields to be unsigned int bit-fields.
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Checkpatch complains on bool bitfields to be an int or u8/u16/u32
bitfield.

Make bool bit-fields to be unsigned int bit-fields.
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Checkpatch complains on bool bitfields to be an int or u8/u16/u32
bitfield.

Make bool bit-fields to be unsigned int bit-fields.
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Checkpatch complains on bool bitfields to be an int or u8/u16/u32
bitfield.

Make bool bit-fields to be unsigned int bit-fields.
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull block fixes from Jens Axboe:
 "A collection of fixes that should go into -rc1. This contains:

   - bsg_open vs bsg_unregister race fix (Anatoliy)

   - NVMe pull request from Christoph, with fixes for regressions in
     this window, FC connect/reconnect path code unification, and a
     trace point addition.

   - timeout fix (Christoph)

   - remove a few unused functions (Christoph)

   - blk-mq tag_set reinit fix (Roman)"

* tag 'for-linus-20180616' of git://git.kernel.dk/linux-block:
  bsg: fix race of bsg_open and bsg_unregister
  block: remov blk_queue_invalidate_tags
  nvme-fabrics: fix and refine state checks in __nvmf_check_ready
  nvme-fabrics: handle the admin-only case properly in nvmf_check_ready
  nvme-fabrics: refactor queue ready check
  blk-mq: remove blk_mq_tagset_iter
  nvme: remove nvme_reinit_tagset
  nvme-fc: fix nulling of queue data on reconnect
  nvme-fc: remove reinit_request routine
  blk-mq: don't time out requests again that are in the timeout handler
  nvme-fc: change controllers first connect to use reconnect path
  nvme: don't rely on the changed namespace list log
  nvmet: free smart-log buffer after use
  nvme-rdma: fix error flow during mapping request data
  nvme: add bio remapping tracepoint
  nvme: fix NULL pointer dereference in nvme_init_subsystem
  blk-mq: reinit q->tag_set_list entry only after grace period