- 24 Jul, 2024 5 commits
-
-
Srinivasan Shanmugam authored
This commit adds a null check for the set_output_gamma function pointer in the dcn30_set_output_transfer_func function. Previously, set_output_gamma was being checked for nullity at line 386, but then it was being dereferenced without any nullity check at line 401. This could potentially lead to a null pointer dereference error if set_output_gamma is indeed null. To fix this, we now ensure that set_output_gamma is not null before dereferencing it. We do this by adding a nullity check for set_output_gamma before the call to set_output_gamma at line 401. If set_output_gamma is null, we log an error message and do not call the function. This fix prevents a potential null pointer dereference error. drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c:401 dcn30_set_output_transfer_func() error: we previously assumed 'mpc->funcs->set_output_gamma' could be null (see line 386) drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c 373 bool dcn30_set_output_transfer_func(struct dc *dc, 374 struct pipe_ctx *pipe_ctx, 375 const struct dc_stream_state *stream) 376 { 377 int mpcc_id = pipe_ctx->plane_res.hubp->inst; 378 struct mpc *mpc = pipe_ctx->stream_res.opp->ctx->dc->res_pool->mpc; 379 const struct pwl_params *params = NULL; 380 bool ret = false; 381 382 /* program OGAM or 3DLUT only for the top pipe*/ 383 if (pipe_ctx->top_pipe == NULL) { 384 /*program rmu shaper and 3dlut in MPC*/ 385 ret = dcn30_set_mpc_shaper_3dlut(pipe_ctx, stream); 386 if (ret == false && mpc->funcs->set_output_gamma) { ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ If this is NULL 387 if (stream->out_transfer_func.type == TF_TYPE_HWPWL) 388 params = &stream->out_transfer_func.pwl; 389 else if (pipe_ctx->stream->out_transfer_func.type == 390 TF_TYPE_DISTRIBUTED_POINTS && 391 cm3_helper_translate_curve_to_hw_format( 392 &stream->out_transfer_func, 393 &mpc->blender_params, false)) 394 params = &mpc->blender_params; 395 /* there are no ROM LUTs in OUTGAM */ 396 if (stream->out_transfer_func.type == TF_TYPE_PREDEFINED) 397 BREAK_TO_DEBUGGER(); 398 } 399 } 400 --> 401 mpc->funcs->set_output_gamma(mpc, mpcc_id, params); ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Then it will crash 402 return ret; 403 } Fixes: d99f1387 ("drm/amd/display: Add DCN3 HWSEQ") Reported-by:Dan Carpenter <dan.carpenter@linaro.org> Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by:
Tom Chung <chiahsuan.chung@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Tim Huang authored
To prevent below probe failure, add a check for models with VCN IP v4.0.6 where VCN1 may be harvested. v2: Apply the same check to VCN IP v4.0 and v5.0. [ 54.070117] RIP: 0010:vcn_v4_0_5_start_dpg_mode+0x9be/0x36b0 [amdgpu] [ 54.071055] Code: 80 fb ff 8d 82 00 80 fe ff 81 fe 00 06 00 00 0f 43 c2 49 69 d5 38 0d 00 00 48 8d 71 04 c1 e8 02 4c 01 f2 48 89 b2 50 f6 02 00 <89> 01 48 8b 82 50 f6 02 00 48 8d 48 04 48 89 8a 50 f6 02 00 c7 00 [ 54.072408] RSP: 0018:ffffb17985f736f8 EFLAGS: 00010286 [ 54.072793] RAX: 00000000000000d6 RBX: ffff99a82f680000 RCX: 0000000000000000 [ 54.073315] RDX: ffff99a82f680000 RSI: 0000000000000004 RDI: ffff99a82f680000 [ 54.073835] RBP: ffffb17985f73730 R08: 0000000000000001 R09: 0000000000000000 [ 54.074353] R10: 0000000000000008 R11: ffffb17983c05000 R12: 0000000000000000 [ 54.074879] R13: 0000000000000000 R14: ffff99a82f680000 R15: 0000000000000001 [ 54.075400] FS: 00007f8d9c79a000(0000) GS:ffff99ab2f140000(0000) knlGS:0000000000000000 [ 54.075988] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 54.076408] CR2: 0000000000000000 CR3: 0000000140c3a000 CR4: 0000000000750ef0 [ 54.076927] PKRU: 55555554 [ 54.077132] Call Trace: [ 54.077319] <TASK> [ 54.077484] ? show_regs+0x69/0x80 [ 54.077747] ? __die+0x28/0x70 [ 54.077979] ? page_fault_oops+0x180/0x4b0 [ 54.078286] ? do_user_addr_fault+0x2d2/0x680 [ 54.078610] ? exc_page_fault+0x84/0x190 [ 54.078910] ? asm_exc_page_fault+0x2b/0x30 [ 54.079224] ? vcn_v4_0_5_start_dpg_mode+0x9be/0x36b0 [amdgpu] [ 54.079941] ? vcn_v4_0_5_start_dpg_mode+0xe6/0x36b0 [amdgpu] [ 54.080617] vcn_v4_0_5_set_powergating_state+0x82/0x19b0 [amdgpu] [ 54.081316] amdgpu_device_ip_set_powergating_state+0x64/0xc0 [amdgpu] [ 54.082057] amdgpu_vcn_ring_begin_use+0x6f/0x1d0 [amdgpu] [ 54.082727] amdgpu_ring_alloc+0x44/0x70 [amdgpu] [ 54.083351] amdgpu_vcn_dec_sw_ring_test_ring+0x40/0x110 [amdgpu] [ 54.084054] amdgpu_ring_test_helper+0x22/0x90 [amdgpu] [ 54.084698] vcn_v4_0_5_hw_init+0x87/0xc0 [amdgpu] [ 54.085307] amdgpu_device_init+0x1f96/0x2780 [amdgpu] [ 54.085951] amdgpu_driver_load_kms+0x1e/0xc0 [amdgpu] [ 54.086591] amdgpu_pci_probe+0x19f/0x550 [amdgpu] [ 54.087215] local_pci_probe+0x48/0xa0 [ 54.087509] pci_device_probe+0xc9/0x250 [ 54.087812] really_probe+0x1a4/0x3f0 [ 54.088101] __driver_probe_device+0x7d/0x170 [ 54.088443] driver_probe_device+0x24/0xa0 [ 54.088765] __driver_attach+0xdd/0x1d0 [ 54.089068] ? __pfx___driver_attach+0x10/0x10 [ 54.089417] bus_for_each_dev+0x8e/0xe0 [ 54.089718] driver_attach+0x22/0x30 [ 54.090000] bus_add_driver+0x120/0x220 [ 54.090303] driver_register+0x62/0x120 [ 54.090606] ? __pfx_amdgpu_init+0x10/0x10 [amdgpu] [ 54.091255] __pci_register_driver+0x62/0x70 [ 54.091593] amdgpu_init+0x67/0xff0 [amdgpu] [ 54.092190] do_one_initcall+0x5f/0x330 [ 54.092495] do_init_module+0x68/0x240 [ 54.092794] load_module+0x201c/0x2110 [ 54.093093] init_module_from_file+0x97/0xd0 [ 54.093428] ? init_module_from_file+0x97/0xd0 [ 54.093777] idempotent_init_module+0x11c/0x2a0 [ 54.094134] __x64_sys_finit_module+0x64/0xc0 [ 54.094476] do_syscall_64+0x58/0x120 [ 54.094767] entry_SYSCALL_64_after_hwframe+0x6e/0x76 Signed-off-by:
Tim Huang <tim.huang@amd.com> Reviewed-by:
Saleemkhan Jamadar <saleemkhan.jamadar@amd.com> Signed-off-by:
-
Yifan Zhang authored
avoid kfd init crash in that case. Signed-off-by:
Yifan Zhang <yifan1.zhang@amd.com> Acked-by:
Jesse Zhang <Jesse.Zhang@amd.com> Reviewed-by:
-
Philip Yang authored
Ensure update queue new ring buffer is mapped on GPU with correct size. Decrease queue old ring_bo queue_refcount and increase new ring_bo queue_refcount. Signed-off-by:
Philip Yang <Philip.Yang@amd.com> Reviewed-by:
Felix Kuehling <felix.kuehling@amd.com> Acked-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Philip Yang authored
Queue CWSR area maybe registered to GPU as svm memory, create queue to ensure svm mapped to GPU with KFD_IOCTL_SVM_FLAG_GPU_ALWAYS_MAPPED flag. Add queue_refcount to struct svm_range, to track queue CWSR area usage. Because unmap mmu notifier callback return value is ignored, if application unmap the CWSR area while queue is active, pr_warn message in dmesg log. To be safe, evict user queue. Signed-off-by:
-
- 23 Jul, 2024 35 commits
-
-
Alex Deucher authored
For the bad opcode case, it will cause CP/ME hang. The firmware will prevent the ME side from hanging by raising a bad opcode interrupt. And the driver needs to perform a vmid reset when receiving the interrupt. Acked-by:
-
Alex Deucher authored
For the bad opcode case, it will cause CP/ME hang. The firmware will prevent the ME side from hanging by raising a bad opcode interrupt. And the driver needs to perform a vmid reset when receiving the interrupt. Acked-by:
-
Jesse Zhang authored
For the bad opcode case, it will cause CP/ME hang. The firmware will prevent the ME side from hanging by raising a bad opcode interrupt. And the driver needs to perform a vmid reset when receiving the interrupt. v2: update irq naming (drop priv) (Alex) Acked-by:
-
Jesse Zhang authored
For the bad opcode case, it will cause CP/ME hang. The firmware will prevent the ME side from hanging by raising a bad opcode interrupt. And the driver needs to perform a vmid reset when receiving the interrupt. v2: update irq naming (drop priv) (Alex) Acked-by:
-
Jesse Zhang authored
For the bad opcode case, it will cause CP/ME hang. The firmware will prevent the ME side from hanging by raising a bad opcode interrupt. And the driver needs to perform a vmid reset when receiving the interrupt. v2: update irq naming (drop priv) (Alex) Acked-by:
Prike Liang <Prike.Liang@amd.com> Reviewed-by:
-
Alex Deucher authored
Add the irq source for bad opcodes. Acked-by:
-
Alex Deucher authored
Need to handle the interrupt enables for all pipes. Acked-by:
-
Alex Deucher authored
Need to handle the interrupt enables for all pipes. v2: fix indexing (Jessie) Acked-by:
-
Alex Deucher authored
Need to handle the interrupt enables for all pipes. v2: fix indexing (Jessie) Acked-by:
-
Alex Deucher authored
Need to handle the interrupt enables for all pipes. v2: fix indexing (Jessie) Acked-by:
-
Alex Deucher authored
It should work the same for compute as well as gfx. Reviewed-by:
-
Alex Deucher authored
It should work the same for compute as well as gfx. Reviewed-by:
-
Alex Deucher authored
It should work the same for compute as well as gfx. Reviewed-by:
-
Stanley.Yang authored
The eeprom table is empty before initializing, set eeprom table version first before initializing. Changed from V1: Reuse amdgpu_ras_set_eeprom_table_version function Signed-off-by:
Stanley.Yang <Stanley.Yang@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
This commit addresses a potential null pointer dereference issue in the `dcn32_init_hw` function. The issue could occur when `dc->clk_mgr` is null. The fix adds a check to ensure `dc->clk_mgr` is not null before accessing its functions. This prevents a potential null pointer dereference. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn32/dcn32_hwseq.c:961 dcn32_init_hw() error: we previously assumed 'dc->clk_mgr' could be null (see line 782) Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
Alex Hung <alex.hung@amd.com> Signed-off-by:
-
YiPeng Chai authored
The ras command shared memory is allocated from VRAM and the response status of the command buffer will not be zero due to gpu being in fatal error state after ras UE error injection. Signed-off-by:
YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by:
-
Philip Yang authored
Add atomic queue_refcount to struct bo_va, return -EBUSY to fail unmap BO from the GPU if the bo_va queue_refcount is not zero. Create queue to increase the bo_va queue_refcount, destroy queue to decrease the bo_va queue_refcount, to ensure the queue buffers mapped on the GPU when queue is active. Signed-off-by:
-
Alex Deucher authored
Based on gfx9.0 implementation. Reviewed-by:
-
Sunil Khatri authored
Add print support for ip dump for sdma_v_4_4_2 in devcoredump. Reviewed-by:
Sunil Khatri <sunil.khatri@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
This commit addresses a potential null pointer dereference issue in the `dcn401_init_hw` function. The issue could occur when `dc->clk_mgr` or `dc->clk_mgr->funcs` is null. The fix adds a check to ensure `dc->clk_mgr` and `dc->clk_mgr->funcs` is not null before accessing its functions. This prevents a potential null pointer dereference. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn401/dcn401_hwseq.c:416 dcn401_init_hw() error: we previously assumed 'dc->clk_mgr' could be null (see line 225) Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
This commit addresses a potential null pointer dereference issue in the `dcn30_init_hw` function. The issue could occur when `dc->clk_mgr` or `dc->clk_mgr->funcs` is null. The fix adds a check to ensure `dc->clk_mgr` and `dc->clk_mgr->funcs` is not null before accessing its functions. This prevents a potential null pointer dereference. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c:789 dcn30_init_hw() error: we previously assumed 'dc->clk_mgr' could be null (see line 628) Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
-
Philip Yang authored
Find user queue rptr, ring buf, eop buffer and cwsr area BOs, and check BOs are mapped on the GPU with correct size and take the BO reference. Signed-off-by:
-
Alex Deucher authored
It should work the same for compute as well as gfx. Reviewed-by:
-
Alex Deucher authored
It should work the same for compute as well as gfx. Reviewed-by:
-
Alex Deucher authored
It should work the same for compute as well as gfx. Reviewed-by:
-
Srinivasan Shanmugam authored
This commit addresses a potential null pointer dereference issue in the `dcn32_acquire_idle_pipe_for_head_pipe_in_layer` function. The issue could occur when `head_pipe` is null. The fix adds a check to ensure `head_pipe` is not null before asserting it. If `head_pipe` is null, the function returns NULL to prevent a potential null pointer dereference. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn32/dcn32_resource.c:2690 dcn32_acquire_idle_pipe_for_head_pipe_in_layer() error: we previously assumed 'head_pipe' could be null (see line 2681) Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
This commit addresses a potential null pointer dereference issue in the `dcn201_acquire_free_pipe_for_layer` function. The issue could occur when `head_pipe` is null. The fix adds a check to ensure `head_pipe` is not null before asserting it. If `head_pipe` is null, the function returns NULL to prevent a potential null pointer dereference. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn201/dcn201_resource.c:1016 dcn201_acquire_free_pipe_for_layer() error: we previously assumed 'head_pipe' could be null (see line 1010) Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
This commit addresses a potential index out of bounds issue in the `cm3_helper_translate_curve_to_hw_format` function in the DCN30 color management module. The issue could occur when the index 'i' exceeds the number of transfer function points (TRANSFER_FUNC_POINTS). The fix adds a check to ensure 'i' is within bounds before accessing the transfer function points. If 'i' is out of bounds, the function returns false to indicate an error. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:180 cm3_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:181 cm3_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:182 cm3_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
'stream_enc_regs' array is an array of dcn10_stream_enc_registers structures. The array is initialized with four elements, corresponding to the four calls to stream_enc_regs() in the array initializer. This means that valid indices for this array are 0, 1, 2, and 3. The error message 'stream_enc_regs' 4 <= 5 below, is indicating that there is an attempt to access this array with an index of 5, which is out of bounds. This could lead to undefined behavior Here, eng_id is used as an index to access the stream_enc_regs array. If eng_id is 5, this would result in an out-of-bounds access on the stream_enc_regs array. Thus fixing Buffer overflow error in dcn401_stream_encoder_create Found by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn401/dcn401_resource.c:1209 dcn401_stream_encoder_create() error: buffer overflow 'stream_enc_regs' 4 <= 5 Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
Fixes index out of bounds issue in `cm_helper_translate_curve_to_degamma_hw_format` function. The issue could occur when the index 'i' exceeds the number of transfer function points (TRANSFER_FUNC_POINTS). The fix adds a check to ensure 'i' is within bounds before accessing the transfer function points. If 'i' is out of bounds the function returns false to indicate an error. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:594 cm_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:595 cm_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:596 cm_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
This commit addresses a potential index out of bounds issue in the `cm3_helper_translate_curve_to_degamma_hw_format` function in the DCN30 color management module. The issue could occur when the index 'i' exceeds the number of transfer function points (TRANSFER_FUNC_POINTS). The fix adds a check to ensure 'i' is within bounds before accessing the transfer function points. If 'i' is out of bounds, the function returns false to indicate an error. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:338 cm3_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:339 cm3_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:340 cm3_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
Fixes the below with gcc W=1: drivers/gpu/drm/amd/amdgpu/../display/dc/dpp/dcn401/dcn401_dpp_dscl.c:961: warning: Function parameter or struct member 'bs_coeffs_updated' not described in 'dpp401_dscl_program_isharp' Fixes: 94beb4ac ("drm/amd/display: ensure EASF and ISHARP coefficients are programmed together") Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
-
Aric Cyr authored
Signed-off-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Reviewed-by:
Leo Li <sunpeng.li@amd.com> Signed-off-by:
-
Aurabindo Pillai authored
dc/{dcn401,dcn303} are unused since the files in it got moved under their respective new components location. Hence they are no longer necessary Fixes: 2d62bb45 ("drm/amd/display: Refactor DCN3X into component folder") Reviewed-by: -
Joshua Aberback authored
[Why] Some interface functions are defined in both the public and private HWSS interfaces, which can lead to confusion and runtime issues, therefore the duplicates should be eliminated. [How] - power_down should only be private, because it's only used within HWSS. - update_plane_addr should only be public, as it's used outside HWSS. Reviewed-by:
Joshua Aberback <joshua.aberback@amd.com> Signed-off-by:
-
