- 10 Dec, 2006 40 commits
-
-
Christoph Lameter authored
Large sched domains can be very expensive to scan. Add an option SD_SERIALIZE to the sched domain flags. If that flag is set then we make sure that no other such domain is being balanced. [akpm@osdl.org: build fix] Signed-off-by:
Christoph Lameter <clameter@sgi.com> Cc: Peter Williams <pwil3058@bigpond.net.au> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Christoph Lameter <clameter@sgi.com> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Cc: "Chen, Kenneth W" <kenneth.w.chen@intel.com> Acked-by:
Ingo Molnar <mingo@elte.hu> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Christoph Lameter authored
Trigger softirq less frequently We trigger the softirq before this patch using offset of sd->interval. However, if the queue is busy then it is sufficient to schedule the softirq with sd->interval * busy_factor. So we modify the calculation of the next time to balance by taking the interval added to last_balance again. This is only the right value if the idle/busy situation continues as is. There are two potential trouble spots: - If the queue was idle and now gets busy then we call rebalance early. However, that is not a problem because we will then use the longer interval for the next period. - If the queue was busy and becomes idle then we potentially wait too long before rebalancing. However, when the task goes idle then idle_balance is called. We add another calculation of the next balance time based on sd->interval in idle_balance so that we will rebalance soon. V2->V3: - Calculate rebalance time based on current jiffies and not based on the jiffies at the last time we load balanced. We no longer rely on staggering and therefore we can affort to do this now. V3->V4: - Use functions to do jiffy comparisons. Signed-off-by:
-
Christoph Lameter authored
Call rebalance_tick (renamed to run_rebalance_domains) from a newly introduced softirq. We calculate the earliest time for each layer of sched domains to be rescanned (this is the rescan time for idle) and use the earliest of those to schedule the softirq via a new field "next_balance" added to struct rq. Signed-off-by:
-
Christoph Lameter authored
Perform the idle state determination in rebalance_tick. If we separate balancing from sched_tick then we also need to determine the idle state in rebalance_tick. V2->V3 Remove useless idlle != 0 check. Checking nr_running seems to be sufficient. Thanks Suresh. Signed-off-by:
-
Christoph Lameter authored
A load calculation is always done in rebalance_tick() in addition to the real load balancing activities that only take place when certain jiffie counts have been reached. Move that processing into a separate function and call it directly from scheduler_tick(). Also extract the time slice handling from scheduler_tick and put it into a separate function. Then we can clean up scheduler_tick significantly. It will no longer have any gotos. Signed-off-by:
-
Christoph Lameter authored
Interrupts must be disabled for request queue locks if we want to run load_balance() with interrupts enabled. Signed-off-by:
-
Christoph Lameter authored
Timer interrupts already are staggered. We do not need an additional layer of time staggering for short load balancing actions that take a reasonably small portion of the time slice. For load balancing on large sched_domains we will add a serialization later that avoids concurrent load balance operations and thus has the same effect as load staggering. Signed-off-by:
-
Christoph Lameter authored
Avoid taking the request queue lock in wake_priority_sleeper if there are no running processes. Signed-off-by:
-
Siddha, Suresh B authored
With SMT, if the logical processor is busy, load balance happens for every 8msec(min)-16msec(max). There is no need to do this often, as this is just for fairness(to maintain uniform runqueue lengths) and default time slice anyhow is 100msec. Appended patch increases this interval to 64msec(min)-128msec(max) when the logical processor is busy. Signed-off-by:
Suresh Siddha <suresh.b.siddha@intel.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Acked-by:
-
Kirill Korotaev authored
move_task_off_dead_cpu() requires interrupts to be disabled, while migrate_dead() calls it with enabled interrupts. Added appropriate comments to functions and added BUG_ON(!irqs_disabled()) into double_rq_lock() and double_lock_balance() which are the origin sources of such bugs. Signed-off-by:
Kirill Korotaev <dev@openvz.org> Acked-by:
-
Siddha, Suresh B authored
Move the sched group allocations to percpu area. This will minimize cross node memory references and also cleans up the sched groups allocation for allnodes sched domain. Signed-off-by:
-
Robert P. J. Day authored
Acked-by:
Robert P. J. Day <rpjday@mindspring.com> Signed-off-by:
-
Ralf Baechle authored
Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by:
-
Andrew Morton authored
Wire up the IO accounting into getdelays.c. Usage: To display I/O stats for each exitting task: vmm:/home/akpm> ./getdelays -m0,1,2,3 -i -l cpumask 0 maskset 1 printing IO accounting listen forever rm: read=8192, write=0, cancelled_write=0 cvs: read=733184, write=4255744, cancelled_write=4096 make: read=217088, write=0, cancelled_write=0 cc1: read=4263936, write=12288, cancelled_write=0 as: read=811008, write=8192, cancelled_write=0 gcc: read=323584, write=0, cancelled_write=12288 cc1: read=0, write=8192, cancelled_write=0 as: read=4096, write=4096, cancelled_write=0 gcc: read=16384, write=0, cancelled_write=4096 as: read=4096, write=4096, cancelled_write=0 gcc: read=16384, write=0, cancelled_write=8192 ld: read=1011712, write=16384, cancelled_write=0 collect2: read=626688, write=0, cancelled_write=0 gcc: read=204800, write=0, cancelled_write=0 cc1: read=0, write=8192, cancelled_write=0 as: read=4096, write=4096, cancelled_write=0 gcc: read=16384, write=0, cancelled_write=8192 ld: read=8192, write=16384, cancelled_write=0 collect2: read=49152, write=0, cancelled_write=0 gcc: read=0, write=0, cancelled_write=0 cc1: read=0, write=4096, cancelled_write=0 ld: read=4096, write=12288, cancelled_write=0 collect2: read=49152, write=0, cancelled_write=0 gcc: read=0, write=0, cancelled_write=0 To display I/O stats for a particular presently-running task: vmm:/home/akpm> ./getdelays -i -p $(pidof crond) printing IO accounting crond: read=61440, write=0, cancelled_write=0 Cc: Jay Lan <jlan@sgi.com> Cc: Shailabh Nagar <nagar@watson.ibm.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Chris Sturtivant <csturtiv@sgi.com> Cc: Tony Ernst <tee@sgi.com> Cc: Guillaume Thouvenin <guillaume.thouvenin@bull.net> Cc: David Wright <daw@sgi.com> Signed-off-by:
-
Andrew Morton authored
- Various cleanups - Report errors to stderr, not stdout - A printf was missing a \n and was hiding from me. Cc: Jay Lan <jlan@sgi.com> Cc: Shailabh Nagar <nagar@watson.ibm.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Chris Sturtivant <csturtiv@sgi.com> Cc: Tony Ernst <tee@sgi.com> Cc: Guillaume Thouvenin <guillaume.thouvenin@bull.net> Cc: David Wright <daw@sgi.com> Signed-off-by:
-
Andrew Morton authored
Deliver IO accounting via taskstats. Cc: Jay Lan <jlan@sgi.com> Cc: Shailabh Nagar <nagar@watson.ibm.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Chris Sturtivant <csturtiv@sgi.com> Cc: Tony Ernst <tee@sgi.com> Cc: Guillaume Thouvenin <guillaume.thouvenin@bull.net> Cc: David Wright <daw@sgi.com> Signed-off-by:
-
Andrew Morton authored
Fix weird whitespace mangling in taskstats.h Cc: Jay Lan <jlan@sgi.com> Cc: Shailabh Nagar <nagar@watson.ibm.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Chris Sturtivant <csturtiv@sgi.com> Cc: Tony Ernst <tee@sgi.com> Cc: Guillaume Thouvenin <guillaume.thouvenin@bull.net> Cc: David Wright <daw@sgi.com> Signed-off-by:
-
Andrew Morton authored
Add a simple /proc/pid/io to show the IO accounting fields. Maybe this shouldn't be merged in mainline - the preferred reporting channel is taskstats. But given the poor state of our userspace support for taskstats, this is useful for developer-testing, at least. And it improves the changes that the procps developers will wire it up into top(1). Opinions are sought. The patch also wires up the existing IO-accounting fields. It's a bit racy on 32-bit machines: if process A reads process B's /proc/pid/io while process B is updating one of those 64-bit counters, process A could see an intermediate result. Cc: Jay Lan <jlan@sgi.com> Cc: Shailabh Nagar <nagar@watson.ibm.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Chris Sturtivant <csturtiv@sgi.com> Cc: Tony Ernst <tee@sgi.com> Cc: Guillaume Thouvenin <guillaume.thouvenin@bull.net> Cc: David Wright <daw@sgi.com> Signed-off-by:
-
Andrew Morton authored
Account for direct-io. Cc: Jay Lan <jlan@sgi.com> Cc: Shailabh Nagar <nagar@watson.ibm.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Chris Sturtivant <csturtiv@sgi.com> Cc: Tony Ernst <tee@sgi.com> Cc: Guillaume Thouvenin <guillaume.thouvenin@bull.net> Cc: David Wright <daw@sgi.com> Signed-off-by:
-
Andrew Morton authored
CIFS implements ->readpages and doesn't use read_cache_pages(). So wire the read IO accounting up within CIFS. Cc: Jay Lan <jlan@sgi.com> Cc: Shailabh Nagar <nagar@watson.ibm.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Chris Sturtivant <csturtiv@sgi.com> Cc: Tony Ernst <tee@sgi.com> Cc: Guillaume Thouvenin <guillaume.thouvenin@bull.net> Cc: Steven French <sfrench@us.ibm.com> Cc: David Wright <daw@sgi.com> Signed-off-by:
-
Andrew Morton authored
nfs's ->readpages uses read_cache_pages(). Wire it up there. [wfg@mail.ustc.edu.cn: account only successful nfs/fuse reads] Cc: Jay Lan <jlan@sgi.com> Cc: Shailabh Nagar <nagar@watson.ibm.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Chris Sturtivant <csturtiv@sgi.com> Cc: Tony Ernst <tee@sgi.com> Cc: Guillaume Thouvenin <guillaume.thouvenin@bull.net> Cc: David Wright <daw@sgi.com> Signed-off-by:
Fengguang Wu <wfg@mail.ustc.edu.cn> Signed-off-by:
-
Andrew Morton authored
Wire up read accounting for block devices, within submit_bio(). Cc: Jay Lan <jlan@sgi.com> Cc: Shailabh Nagar <nagar@watson.ibm.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Chris Sturtivant <csturtiv@sgi.com> Cc: Tony Ernst <tee@sgi.com> Cc: Guillaume Thouvenin <guillaume.thouvenin@bull.net> Cc: David Wright <daw@sgi.com> Signed-off-by:
-
Andrew Morton authored
Account for the number of byte writes which this process caused to not happen after all. Cc: Jay Lan <jlan@sgi.com> Cc: Shailabh Nagar <nagar@watson.ibm.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Chris Sturtivant <csturtiv@sgi.com> Cc: Tony Ernst <tee@sgi.com> Cc: Guillaume Thouvenin <guillaume.thouvenin@bull.net> Cc: David Wright <daw@sgi.com> Signed-off-by:
-
Andrew Morton authored
Accounting writes is fairly simple: whenever a process flips a page from clean to dirty, we accuse it of having caused a write to underlying storage of PAGE_CACHE_SIZE bytes. This may overestimate the amount of writing: the page-dirtying may cause only one buffer_head's worth of writeout. Fixing that is possible, but probably a bit messy and isn't obviously important. Cc: Jay Lan <jlan@sgi.com> Cc: Shailabh Nagar <nagar@watson.ibm.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Chris Sturtivant <csturtiv@sgi.com> Cc: Tony Ernst <tee@sgi.com> Cc: Guillaume Thouvenin <guillaume.thouvenin@bull.net> Cc: David Wright <daw@sgi.com> Signed-off-by:
-
Andrew Morton authored
Save a tabstop in __set_page_dirty_nobuffers() and __set_page_dirty_buffers() and a few other places. No functional changes. Cc: Jay Lan <jlan@sgi.com> Cc: Shailabh Nagar <nagar@watson.ibm.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Chris Sturtivant <csturtiv@sgi.com> Cc: Tony Ernst <tee@sgi.com> Cc: Guillaume Thouvenin <guillaume.thouvenin@bull.net> Cc: David Wright <daw@sgi.com> Signed-off-by:
-
Andrew Morton authored
The present per-task IO accounting isn't very useful. It simply counts the number of bytes passed into read() and write(). So if a process reads 1MB from an already-cached file, it is accused of having performed 1MB of I/O, which is wrong. (David Wright had some comments on the applicability of the present logical IO accounting: For billing purposes it is useless but for workload analysis it is very useful read_bytes/read_calls average read request size write_bytes/write_calls average write request size read_bytes/read_blocks ie logical/physical can indicate hit rate or thrashing write_bytes/write_blocks ie logical/physical guess since pdflush writes can be missed I often look for logical larger than physical to see filesystem cache problems. And the bytes/cpusec can help find applications that are dominating the cache and causing slow interactive response from page cache contention. I want to find the IO intensive applications and make sure they are doing efficient IO. Thus the acctcms(sysV) or csacms command would give the high IO commands). This patchset adds new accounting which tries to be more accurate. We account for three things: reads: attempt to count the number of bytes which this process really did cause to be fetched from the storage layer. Done at the submit_bio() level, so it is accurate for block-backed filesystems. I also attempt to wire up NFS and CIFS. writes: attempt to count the number of bytes which this process caused to be sent to the storage layer. This is done at page-dirtying time. The big inaccuracy here is truncate. If a process writes 1MB to a file and then deletes the file, it will in fact perform no writeout. But it will have been accounted as having caused 1MB of write. So... cancelled_writes: account the number of bytes which this process caused to not happen, by truncating pagecache. We _could_ just subtract this from the process's `write' accounting. But that means that some processes would be reported to have done negative amounts of write IO, which is silly. So we just report the raw number and punt this decision up to userspace. Now, we _could_ account for writes at the physical I/O level. But - This would require that we track memory-dirtying tasks at the per-page level (would require a new pointer in struct page). - It would mean that IO statistics for a process are usually only available long after that process has exitted. Which means that we probably cannot communicate this info via taskstats. This patch: Wire up the kernel-private data structures and the accessor functions to manipulate them. Cc: Jay Lan <jlan@sgi.com> Cc: Shailabh Nagar <nagar@watson.ibm.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Chris Sturtivant <csturtiv@sgi.com> Cc: Tony Ernst <tee@sgi.com> Cc: Guillaume Thouvenin <guillaume.thouvenin@bull.net> Cc: David Wright <daw@sgi.com> Signed-off-by: -
Sergei Shtylyov authored
Fix the CRC errors in the higher UltraDMA modes with the Promise PDC20268 and newer chips that always occur on non-x86 machines and when there are more than 2 adapters on x86 machines. Fix the overclocking issue for PDC20269 and newer chips that occurs when an UltraDMA/133 capable drive is connected. Here's the summary of changes: - add code to detect the PLL input clock detection and setup it output clock, remove the PowerMac hacks; - replace the macros accessing the indexed regiters with functions, switch to using them where appropriate, gather the PIO/MWDMA/UDMA timings into tables; - rewrite the speedproc() handler to set the drive's transfer mode first, and then override the timing registers set by hardware on UltraDMA/133 chips; - use better criterion for determining higher UltraDMA modes, and add comment concerning the doubtful value of the code enabling IORDY/prefetch; - replace the stupid 'pdcnew_new_' prefixes with mere 'pdcnew_'; - get rid of unneded spaces, parens and type casts, clean up some printk's, add some new lines here and there... This work is loosely based on these former patches by Albert Lee: [1] http://marc.theaimsgroup.com/?l=linux-ide&m=110992442032300 [2] http://marc.theaimsgroup.com/?l=linux-ide&m=110992457729382 [3] http://marc.theaimsgroup.com/?l=linux-ide&m=110992474205555 [4] http://marc.theaimsgroup.com/?l=linux-ide&m=111019224802939 Some PLL clock detection code was backported from his pata_pdc2027x driver... This code has been successfully tested by me on PDC2026[89] chips. I tried to keep this rework as several patches but it made no sense: [2] was largely a modification of the non-working timing override code, [3] by itself extended the overclocking issue to the case of non-UltraDMA/133 drives, and finally, the cleanup patch based on [1] ended up rejected... Signed-off-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Albert Lee <albertcc@tw.ibm.com> Acked-by:
Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by:
-
David Woodhouse authored
There are some kernel-only bits in the middle of <linux/futex.h> which should be removed in what we export to userspace. Signed-off-by:
David Woodhouse <dwmw2@infradead.org> Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Cc: Andi Kleen <ak@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: David Howells <dhowells@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Alexey Dobriyan authored
kernel.cap-bound uses only OP_SET and OP_AND Signed-off-by:
-
Corey Minyard authored
Fix various problems pointed out by Andrew Morton and others: * platform_device_unregister checks for NULL, no need to check here. * Formatting fixes. * Remove big macro and convert to a function. * Use strcmp instead of defining a broken case-insensitive comparison, and make the output parameter info match the case of the input one (change "I/O" to "i/o"). * Return the length instead of 0 from the hotmod parameter handler. * Remove some unused cruft. * The trydefaults parameter only has to do with scanning the "standard" addresses, don't check for that on ACPI. Signed-off-by:Corey Minyard <cminyard@acm.org> Signed-off-by:
-
Randy Dunlap authored
Remove all =0 and =NULL from static initializers. They are not needed and removing them saves space in the object files. Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
Corey Minyard <minyard@acm.org> Signed-off-by:
-
Alessandro Zummo authored
Signed-off-by:
-
Andrew Victor authored
The new Atmel AT91SAM9261 and AT91SAM9260 processors do not have the internal RTC peripheral. This RTC driver is therefore AT91RM9200-specific. This patch renames rtc-at91.c to rtc-at91rm9200.c, and changes the name of the configuration option. Signed-off-by:
Andrew Victor <andrew@sanpeople.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
David Brownell authored
Update more I2C drivers that live outside drivers/i2c to understand that using adapter->dev is not The Way. When actually referring to the adapter hardware, adapter->class_dev.dev is the answer. When referring to a device connected to it, client->dev.dev is the answer. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Acked-by:
Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Scott Wood authored
Add rtc_merge_alarm(), which can be used by rtc drivers to turn a partially specified alarm expiry (i.e. most significant fields set to -1, as with the RTC_ALM_SET ioctl()) into a fully specified expiry. If the most significant specified field is earlier than the current time, the least significant unspecified field is incremented. Signed-off-by:
Scott Wood <scottwood@freescale.com> Acked-by:
-
Randy Dunlap authored
This driver seems to be for a PCI device. drivers/crypto/geode-aes.c:384: warning: implicit declaration of function 'pci_release_regions' drivers/crypto/geode-aes.c:397: warning: implicit declaration of function 'pci_request_regions' Signed-off-by:
Jordan Crouse <jordan.crouse@amd.com> Signed-off-by:
-
Randy Dunlap authored
freezer.h uses task_struct fields so it should include sched.h. CC [M] fs/jfs/jfs_txnmgr.o In file included from fs/jfs/jfs_txnmgr.c:49: include/linux/freezer.h: In function 'frozen': include/linux/freezer.h:9: error: dereferencing pointer to incomplete type include/linux/freezer.h:9: error: 'PF_FROZEN' undeclared (first use in this function) include/linux/freezer.h:9: error: (Each undeclared identifier is reported only once include/linux/freezer.h:9: error: for each function it appears in.) include/linux/freezer.h: In function 'freezing': include/linux/freezer.h:17: error: dereferencing pointer to incomplete type include/linux/freezer.h:17: error: 'PF_FREEZE' undeclared (first use in this function) include/linux/freezer.h: In function 'freeze': include/linux/freezer.h:26: error: dereferencing pointer to incomplete type include/linux/freezer.h:26: error: 'PF_FREEZE' undeclared (first use in this function) include/linux/freezer.h: In function 'do_not_freeze': include/linux/freezer.h:34: error: dereferencing pointer to incomplete type include/linux/freezer.h:34: error: 'PF_FREEZE' undeclared (first use in this function) include/linux/freezer.h: In function 'thaw_process': include/linux/freezer.h:43: error: dereferencing pointer to incomplete type include/linux/freezer.h:43: error: 'PF_FROZEN' undeclared (first use in this function) include/linux/freezer.h:44: warning: implicit declaration of function 'wake_up_process' include/linux/freezer.h: In function 'frozen_process': include/linux/freezer.h:55: error: dereferencing pointer to incomplete type include/linux/freezer.h:55: error: dereferencing pointer to incomplete type include/linux/freezer.h:55: error: 'PF_FREEZE' undeclared (first use in this function) include/linux/freezer.h:55: error: 'PF_FROZEN' undeclared (first use in this function) fs/jfs/jfs_txnmgr.c: In function 'freezing': include/linux/freezer.h:18: warning: control reaches end of non-void function make[2]: *** [fs/jfs/jfs_txnmgr.o] Error 1 Signed-off-by:
Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by:
-
Chuck Ebbert authored
Document how to decode a binary IOCTL number. Signed-off-by:
Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by:
-
Andrew Morton authored
Mention the new fault-injection test framework. Signed-off-by:
-
