- 08 Nov, 2021 3 commits
-
-
YueHaibing authored
kvm_vcpu_preferred_target() always return 0 because kvm_target_cpu() never returns a negative error code. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Reviewed-by:
Alexandru Elisei <alexandru.elisei@arm.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211105011500.16280-1-yuehaibing@huawei.com
-
Randy Dunlap authored
Do not use kernel-doc "/**" notation when the comment is not in kernel-doc format. Fixes this docs build warning: arch/arm64/kvm/hyp/nvhe/sys_regs.c:478: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Handler for protected VM restricted exceptions. Signed-off-by:Randy Dunlap <rdunlap@infradead.org> Reported-by:
kernel test robot <lkp@intel.com> Cc: Fuad Tabba <tabba@google.com> Cc: Marc Zyngier <maz@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: kvmarm@lists.cs.columbia.edu Signed-off-by:
-
Mark Rutland authored
Since ARMv8.0 the upper 32 bits of ESR_ELx have been RES0, and recently some of the upper bits gained a meaning and can be non-zero. For example, when FEAT_LS64 is implemented, ESR_ELx[36:32] contain ISS2, which for an ST64BV or ST64BV0 can be non-zero. This can be seen in ARM DDI 0487G.b, page D13-3145, section D13.2.37. Generally, we must not rely on RES0 bit remaining zero in future, and when extracting ESR_ELx.EC we must mask out all other bits. All C code uses the ESR_ELx_EC() macro, which masks out the irrelevant bits, and therefore no alterations are required to C code to avoid consuming irrelevant bits. In a couple of places the KVM assembly extracts ESR_ELx.EC using LSR on an X register, and so could in theory consume previously RES0 bits. In both cases this is for comparison with EC values ESR_ELx_EC_HVC32 and ESR_ELx_EC_HVC64, for which the upper bits of ESR_ELx must currently be zero, but this could change in future. This patch adjusts the KVM vectors to use UBFX rather than LSR to extract ESR_ELx.EC, ensuring these are robust to future additions to ESR_ELx. Cc: stable@vger.kernel.org Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Cc: Alexandru Elisei <alexandru.elisei@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Will Deacon <will@kernel.org> Acked-by:
Will Deacon <will@kernel.org> Signed-off-by:
-
- 21 Oct, 2021 3 commits
-
-
Marc Zyngier authored
* kvm/selftests/memslot: : . : Enable KVM memslot selftests on arm64, making them less : x86 specific. : . KVM: selftests: Build the memslot tests for arm64 KVM: selftests: Make memslot_perf_test arch independent Signed-off-by: -
Ricardo Koller authored
Add memslot_perf_test and memslot_modification_stress_test to the list of aarch64 selftests. Signed-off-by:
Ricardo Koller <ricarkol@google.com> Reviewed-by:
Andrew Jones <drjones@redhat.com> Reviewed-by:
Oliver Upton <oupton@google.com> Signed-off-by:
-
Ricardo Koller authored
memslot_perf_test uses ucalls for synchronization between guest and host. Ucalls API is architecture independent: tests do not need to know details like what kind of exit they generate on a specific arch. More specifically, there is no need to check whether an exit is KVM_EXIT_IO in x86 for the host to know that the exit is ucall related, as get_ucall() already makes that check. Change memslot_perf_test to not require specifying what exit does a ucall generate. Also add a missing ucall_init. Signed-off-by:
-
- 18 Oct, 2021 12 commits
-
-
Marc Zyngier authored
* kvm-arm64/pkvm/fixed-features: (22 commits) : . : Add the pKVM fixed feature that allows a bunch of exceptions : to either be forbidden or be easily handled at EL2. : . KVM: arm64: pkvm: Give priority to standard traps over pvm handling KVM: arm64: pkvm: Pass vpcu instead of kvm to kvm_get_exit_handler_array() KVM: arm64: pkvm: Move kvm_handle_pvm_restricted around KVM: arm64: pkvm: Consolidate include files KVM: arm64: pkvm: Preserve pending SError on exit from AArch32 KVM: arm64: pkvm: Handle GICv3 traps as required KVM: arm64: pkvm: Drop sysregs that should never be routed to the host KVM: arm64: pkvm: Drop AArch32-specific registers KVM: arm64: pkvm: Make the ERR/ERX*_EL1 registers RAZ/WI KVM: arm64: pkvm: Use a single function to expose all id-regs KVM: arm64: Fix early exit ptrauth handling KVM: arm64: Handle protected guests at 32 bits KVM: arm64: Trap access to pVM restricted features KVM: arm64: Move sanitized copies of CPU features KVM: arm64: Initialize trap registers for protected VMs KVM: arm64: Add handlers for protected VM System Registers KVM: arm64: Simplify masking out MTE in feature id reg KVM: arm64: Add missing field descriptor for MDCR_EL2 KVM: arm64: Pass struct kvm to per-EC handlers KVM: arm64: Move early handlers to per-EC handlers ... Signed-off-by: -
Marc Zyngier authored
Checking for pvm handling first means that we cannot handle ptrauth traps or apply any of the workarounds (GICv3 or TX2 #219). Flip the order around. Signed-off-by:
Fuad Tabba <tabba@google.com> Tested-by:
-
Marc Zyngier authored
Passing a VM pointer around is odd, and results in extra work on VHE. Follow the rest of the design that uses the vcpu instead, and let the nVHE code look into the struct kvm as required. Signed-off-by:
-
Marc Zyngier authored
Place kvm_handle_pvm_restricted() next to its little friends such as kvm_handle_pvm_sysreg(). This allows to make inject_undef64() static. Signed-off-by:
-
Marc Zyngier authored
kvm_fixed_config.h is pkvm specific, and would be better placed near its users. At the same time, include/nvhe/sys_regs.h is now almost empty. Merge the two into arch/arm64/kvm/hyp/include/nvhe/fixed_config.h. Signed-off-by:
-
Marc Zyngier authored
Don't drop a potential SError when a guest gets caught red-handed running AArch32 code. Signed-off-by:
-
Marc Zyngier authored
Forward accesses to the ICV_*SGI*_EL1 registers to EL1, and emulate ICV_SRE_EL1 by returning a fixed value. This should be enough to support GICv3 in a protected guest. Signed-off-by:
-
Marc Zyngier authored
A bunch of system registers (most of them MM related) should never trap to the host under any circumstance. Keep them close to our chest. Signed-off-by:
-
Marc Zyngier authored
All the SYS_*32_EL2 registers are AArch32-specific. Since we forbid AArch32, there is no need to handle those in any way. Signed-off-by:
-
Marc Zyngier authored
The ERR*/ERX* registers should be handled as RAZ/WI, and there should be no need to involve EL1 for that. Add a helper that handles such registers, and repaint the sysreg table to declare these registers as RAZ/WI. Signed-off-by:
-
Marc Zyngier authored
Rather than exposing a whole set of helper functions to retrieve individual ID registers, use the existing decoding tree and expose a single helper instead. This allow a number of functions to be made static, and we now have a single entry point to maintain. Signed-off-by:
-
Marc Zyngier authored
The previous rework of the early exit code to provide an EC-based decoding tree missed the fact that we have two trap paths for ptrauth: the instructions (EC_PAC) and the sysregs (EC_SYS64). Rework the handlers to call the ptrauth handling code on both paths. Signed-off-by:
-
- 17 Oct, 2021 22 commits
-
-
Marc Zyngier authored
* kvm-arm64/memory-accounting: : . : Sprinkle a bunch of GFP_KERNEL_ACCOUNT all over the code base : to better track memory allocation made on behalf of a VM. : . KVM: arm64: Add memcg accounting to KVM allocations KVM: arm64: vgic: Add memcg accounting to vgic allocations Signed-off-by: -
Jia He authored
Inspired by commit 254272ce ("kvm: x86: Add memcg accounting to KVM allocations"), it would be better to make arm64 KVM consistent with common kvm codes. The memory allocations of VM scope should be charged into VM process cgroup, hence change GFP_KERNEL to GFP_KERNEL_ACCOUNT. There remain a few cases since these allocations are global, not in VM scope. Signed-off-by:
Jia He <justin.he@arm.com> Reviewed-by:
-
Jia He authored
Inspired by commit 254272ce ("kvm: x86: Add memcg accounting to KVM allocations"), it would be better to make arm64 vgic consistent with common kvm codes. The memory allocations of VM scope should be charged into VM process cgroup, hence change GFP_KERNEL to GFP_KERNEL_ACCOUNT. There remain a few cases since these allocations are global, not in VM scope. Signed-off-by:
-
Marc Zyngier authored
* kvm-arm64/selftest/timer: : . : Add a set of selftests for the KVM/arm64 timer emulation. : Comes with a minimal GICv3 infrastructure. : . KVM: arm64: selftests: arch_timer: Support vCPU migration KVM: arm64: selftests: Add arch_timer test KVM: arm64: selftests: Add host support for vGIC KVM: arm64: selftests: Add basic GICv3 support KVM: arm64: selftests: Add light-weight spinlock support KVM: arm64: selftests: Add guest support to get the vcpuid KVM: arm64: selftests: Maintain consistency for vcpuid type KVM: arm64: selftests: Add support to disable and enable local IRQs KVM: arm64: selftests: Add basic support to generate delays KVM: arm64: selftests: Add basic support for arch_timers KVM: arm64: selftests: Add support for cpu_relax KVM: arm64: selftests: Introduce ARM64_SYS_KVM_REG tools: arm64: Import sysreg.h KVM: arm64: selftests: Add MMIO readl/writel support Signed-off-by: -
Raghavendra Rao Ananta authored
Since the timer stack (hardware and KVM) is per-CPU, there are potential chances for races to occur when the scheduler decides to migrate a vCPU thread to a different physical CPU. Hence, include an option to stress-test this part as well by forcing the vCPUs to migrate across physical CPUs in the system at a particular rate. Originally, the bug for the fix with commit 3134cc8b ("KVM: arm64: vgic: Resample HW pending state on deactivation") was discovered using arch_timer test with vCPU migrations and can be easily reproduced. Signed-off-by:
Raghavendra Rao Ananta <rananta@google.com> Reviewed-by:
-
Raghavendra Rao Ananta authored
Add a KVM selftest to validate the arch_timer functionality. Primarily, the test sets up periodic timer interrupts and validates the basic architectural expectations upon its receipt. The test provides command-line options to configure the period of the timer, number of iterations, and number of vCPUs. Signed-off-by:
-
Raghavendra Rao Ananta authored
Implement a simple library to perform vGIC-v3 setup from a host point of view. This includes creating a vGIC device, setting up distributor and redistributor attributes, and mapping the guest physical addresses. The definition of REDIST_REGION_ATTR_ADDR is taken from aarch64/vgic_init test. Hence, replace the definition by including vgic.h in the test file. Signed-off-by:
-
Raghavendra Rao Ananta authored
Add basic support for ARM Generic Interrupt Controller v3. The support provides guests to setup interrupts. The work is inspired from kvm-unit-tests and the kernel's GIC driver (drivers/irqchip/irq-gic-v3.c). Signed-off-by:
-
Raghavendra Rao Ananta authored
Add a simpler version of spinlock support for ARM64 for the guests to use. The implementation is loosely based on the spinlock implementation in kvm-unit-tests. Signed-off-by:
-
Raghavendra Rao Ananta authored
At times, such as when in the interrupt handler, the guest wants to get the vcpuid that it's running on to pull the per-cpu private data. As a result, introduce guest_get_vcpuid() that returns the vcpuid of the calling vcpu. The interface is architecture independent, but defined only for arm64 as of now. Suggested-by:
Reiji Watanabe <reijiw@google.com> Signed-off-by:
-
Raghavendra Rao Ananta authored
The prototype of aarch64_vcpu_setup() accepts vcpuid as 'int', while the rest of the aarch64 (and struct vcpu) carries it as 'uint32_t'. Hence, change the prototype to make it consistent throughout the board. Signed-off-by:
-
Raghavendra Rao Ananta authored
Add functions local_irq_enable() and local_irq_disable() to enable and disable the IRQs from the guest, respectively. Signed-off-by:
-
Raghavendra Rao Ananta authored
Add udelay() support to generate a delay in the guest. The routines are derived and simplified from kernel's arch/arm64/lib/delay.c. Signed-off-by:
-
Raghavendra Rao Ananta authored
Add a minimalistic library support to access the virtual timers, that can be used for simple timing functionalities, such as introducing delays in the guest. Signed-off-by:
-
Raghavendra Rao Ananta authored
Implement the guest helper routine, cpu_relax(), to yield the processor to other tasks. The function was derived from arch/arm64/include/asm/vdso/processor.h. Signed-off-by:
-
Raghavendra Rao Ananta authored
With the inclusion of sysreg.h, that brings in system register encodings, it would be redundant to re-define register encodings again in processor.h to use it with ARM64_SYS_REG for the KVM functions such as set_reg() or get_reg(). Hence, add helper macro, ARM64_SYS_KVM_REG, that converts SYS_* definitions in sysreg.h into ARM64_SYS_REG definitions. Also replace all the users of ARM64_SYS_REG, relying on the encodings created in processor.h, with ARM64_SYS_KVM_REG and remove the definitions. Signed-off-by:
-
Raghavendra Rao Ananta authored
Bring-in the kernel's arch/arm64/include/asm/sysreg.h into tools/ for arm64 to make use of all the standard register definitions in consistence with the kernel. Make use of the register read/write definitions from sysreg.h, instead of the existing definitions. A syntax correction is needed for the files that use write_sysreg() to make it compliant with the new (kernel's) syntax. Reviewed-by:
-
Raghavendra Rao Ananta authored
Define the readl() and writel() functions for the guests to access (4-byte) the MMIO region. The routines, and their dependents, are inspired from the kernel's arch/arm64/include/asm/io.h and arch/arm64/include/asm/barrier.h. Signed-off-by:
-
Marc Zyngier authored
* kvm-arm64/vgic-fixes-5.16: : . : Multiple updates to the GICv3 emulation in order to better support : the dreadful Apple M1 that only implements half of it, and in a : broken way... : . KVM: arm64: vgic-v3: Align emulated cpuif LPI state machine with the pseudocode KVM: arm64: vgic-v3: Don't advertise ICC_CTLR_EL1.SEIS KVM: arm64: vgic-v3: Reduce common group trapping to ICV_DIR_EL1 when possible KVM: arm64: vgic-v3: Work around GICv3 locally generated SErrors KVM: arm64: Force ID_AA64PFR0_EL1.GIC=1 when exposing a virtual GICv3 Signed-off-by: -
Marc Zyngier authored
Having realised that a virtual LPI does transition through an active state that does not exist on bare metal, align the CPU interface emulation with the behaviour specified in the architecture pseudocode. The LPIs now transition to active on IAR read, and to inactive on EOI write. Special care is taken not to increment the EOIcount for an LPI that isn't present in the LRs. Signed-off-by:
-
Marc Zyngier authored
Since we are trapping all sysreg accesses when ICH_VTR_EL2.SEIS is set, and that we never deliver an SError when emulating any of the GICv3 sysregs, don't advertise ICC_CTLR_EL1.SEIS. Reviewed-by:
-
Marc Zyngier authored
On systems that advertise ICH_VTR_EL2.SEIS, we trap all GICv3 sysreg accesses from the guest. From a performance perspective, this is OK as long as the guest doesn't hammer the GICv3 CPU interface. In most cases, this is fine, unless the guest actively uses priorities and switches PMR_EL1 very often. Which is exactly what happens when a Linux guest runs with irqchip.gicv3_pseudo_nmi=1. In these condition, the performance plumets as we hit PMR each time we mask/unmask interrupts. Not good. There is however an opportunity for improvement. Careful reading of the architecture specification indicates that the only GICv3 sysreg belonging to the common group (which contains the SGI registers, PMR, DIR, CTLR and RPR) that is allowed to generate a SError is DIR. Everything else is safe. It is thus possible to substitute the trapping of all the common group with just that of DIR if it supported by the implementation. Yes, that's yet another optional bit of the architecture. So let's just do that, as it leads to some impressive result on the M1: Without this change: bash-5.1# /host/home/maz/hackbench 100 process 1000 Running with 100*40 (== 4000) tasks. Time: 56.596 With this change: bash-5.1# /host/home/maz/hackbench 100 process 1000 Running with 100*40 (== 4000) tasks. Time: 8.649 which is a pretty convincing result. Signed-off-by:
-
