The SBI v2.0 introduced a fw_read_hi function to read 64 bit firmware
counters for RV32 based systems.

Add infrastructure to support that.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-16-atishp@rivosinc.comSigned-off-by: Anup Patel <anup@brainfault.org>

KVM enables perf for guest via counter virtualization. However, the
sampling can not be supported as there is no mechanism to enabled
trap/emulate scountovf in ISA yet. Rely on the SBI PMU snapshot
to provide the counter overflow data via the shared memory.

In case of sampling event, the host first sets the guest's LCOFI
interrupt and injects to the guest via irq filtering mechanism defined
in AIA specification. Thus, ssaia must be enabled in the host in order
to use perf sampling in the guest. No other AIA dependency w.r.t kernel
is required.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-15-atishp@rivosinc.comSigned-off-by: Anup Patel <anup@brainfault.org>

PMU Snapshot function allows to minimize the number of traps when the
guest access configures/access the hpmcounters. If the snapshot feature
is enabled, the hypervisor updates the shared memory with counter
data and state of overflown counters. The guest can just read the
shared memory instead of trap & emulate done by the hypervisor.

This patch doesn't implement the counter overflow yet.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-14-atishp@rivosinc.comSigned-off-by: Anup Patel <anup@brainfault.org>

Currently, we return a linux error code if creating a perf event failed
in kvm. That shouldn't be necessary as guest can continue to operate
without perf profiling or profiling with firmware counters.

Return appropriate SBI error code to indicate that PMU configuration
failed. An error message in kvm already describes the reason for failure.

Fixes: 0cb74b65 ("RISC-V: KVM: Implement perf support without sampling")
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-13-atishp@rivosinc.comSigned-off-by: Anup Patel <anup@brainfault.org>

The virtual counter value is updated during pmu_ctr_read. There is no need
to update it in reset case. Otherwise, it will be counted twice which is
incorrect.

Fixes: 0cb74b65 ("RISC-V: KVM: Implement perf support without sampling")
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-12-atishp@rivosinc.comSigned-off-by: Anup Patel <anup@brainfault.org>

The initial sample period value when counter value is not assigned
should be set to maximum value supported by the counter width.
Otherwise, it may result in spurious interrupts.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240420151741.962500-11-atishp@rivosinc.comSigned-off-by: Anup Patel <anup@brainfault.org>

SBI v2.0 SBI introduced PMU snapshot feature which adds the following
features.

1. Read counter values directly from the shared memory instead of
csr read.
2. Start multiple counters with initial values with one SBI call.

These functionalities optimizes the number of traps to the higher
privilege mode. If the kernel is in VS mode while the hypervisor
deploy trap & emulate method, this would minimize all the hpmcounter
CSR read traps. If the kernel is running in S-mode, the benefits
reduced to CSR latency vs DRAM/cache latency as there is no trap
involved while accessing the hpmcounter CSRs.

In both modes, it does saves the number of ecalls while starting
multiple counter together with an initial values. This is a likely
scenario if multiple counters overflow at the same time.
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-10-atishp@rivosinc.comSigned-off-by: Anup Patel <anup@brainfault.org>

For RV32, used_hw_ctrs can have more than 1 word if the firmware chooses
to interleave firmware/hardware counters indicies. Even though it's a
unlikely scenario, handle that case by iterating over all the words
instead of just using the first word.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-9-atishp@rivosinc.comSigned-off-by: Anup Patel <anup@brainfault.org>

As per the SBI specification, minor version is encoded in the
lower 24 bits only. Make sure that the SBI version is computed
with the appropriate mask.

Currently, there is no minor version in use. Thus, it doesn't
change anything functionality but it is good to be compliant with
the specification.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-8-atishp@rivosinc.comSigned-off-by: Anup Patel <anup@brainfault.org>

SBI_STA_SHMEM_DISABLE is a macro to invoke disable shared memory
commands. As this can be invoked from other SBI extension context
as well, rename it to more generic name as SBI_SHMEM_DISABLE.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-7-atishp@rivosinc.comSigned-off-by: Anup Patel <anup@brainfault.org>

SBI PMU Snapshot function optimizes the number of traps to
higher privilege mode by leveraging a shared memory between the S/VS-mode
and the M/HS mode. Add the definitions for that extension and new error
codes.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-6-atishp@rivosinc.comSigned-off-by: Anup Patel <anup@brainfault.org>

It is a good practice to use BIT() instead of (1 << x).
Replace the current usages with BIT().

Take this opportunity to replace few (1UL << x) with BIT() as well
for consistency.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-5-atishp@rivosinc.comSigned-off-by: Anup Patel <anup@brainfault.org>

SBI v2.0 introduced a explicit function to read the upper 32 bits
for any firmware counter width that is longer than 32bits.
This is only applicable for RV32 where firmware counter can be
64 bit.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-4-atishp@rivosinc.comSigned-off-by: Anup Patel <anup@brainfault.org>

SBI v2.0 added another function to SBI PMU extension to read
the upper bits of a counter with width larger than XLEN.

Add the definition for that function.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Clément Léger <cleger@rivosinc.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-3-atishp@rivosinc.comSigned-off-by: Anup Patel <anup@brainfault.org>

The counter overflow CSR name is "scountovf" not "sscountovf".

Fix the csr name.

Fixes: 4905ec2f ("RISC-V: Add sscofpmf extension support")
Reviewed-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-2-atishp@rivosinc.comSigned-off-by: Anup Patel <anup@brainfault.org>

Originally, the use of kvm->lock in SBI_EXT_HSM_HART_START also avoids
the simultaneous updates to the reset context of target VCPU. Since this
lock has been replace with vcpu->mp_state_lock, and this new lock also
protects the vcpu->mp_state. We have to add a separate lock for
vcpu->reset_cntx.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240417074528.16506-3-yongxuan.wang@sifive.comSigned-off-by: Anup Patel <anup@brainfault.org>

Documentation/virt/kvm/locking.rst advises that kvm->lock should be
acquired outside vcpu->mutex and kvm->srcu. However, when KVM/RISC-V
handling SBI_EXT_HSM_HART_START, the lock ordering is vcpu->mutex,
kvm->srcu then kvm->lock.

Although the lockdep checking no longer complains about this after commit
f0f44752 ("rcu: Annotate SRCU's update-side lockdep dependencies"),
it's necessary to replace kvm->lock with a new dedicated lock to ensure
only one hart can execute the SBI_EXT_HSM_HART_START call for the target
hart simultaneously.

Additionally, this patch also rename "power_off" to "mp_state" with two
possible values. The vcpu->mp_state_lock also protects the access of
vcpu->mp_state.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240417074528.16506-2-yongxuan.wang@sifive.comSigned-off-by: Anup Patel <anup@brainfault.org>

Initial support for RISC-V KVM ebreak test. Check the exit reason and
the PC when guest debug is enabled. Also to make sure the guest could
handle the ebreak exception without exiting to the VMM when guest debug
is not enabled.
Signed-off-by: Chao Du <duchao@eswincomputing.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20240402062628.5425-4-duchao@eswincomputing.comSigned-off-by: Anup Patel <anup@brainfault.org>

Exit to userspace for breakpoint traps. Set the exit_reason as
KVM_EXIT_DEBUG before exit.
Signed-off-by: Chao Du <duchao@eswincomputing.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240402062628.5425-3-duchao@eswincomputing.comSigned-off-by: Anup Patel <anup@brainfault.org>

kvm_vm_ioctl_check_extension(): Return 1 if KVM_CAP_SET_GUEST_DEBUG is
been checked.

kvm_arch_vcpu_ioctl_set_guest_debug(): Update the guest_debug flags
from userspace accordingly. Route the breakpoint exceptions to HS mode
if the VCPU is being debugged by userspace, by clearing the
corresponding bit in hedeleg.

Initialize the hedeleg configuration in kvm_riscv_vcpu_setup_config().
Write the actual CSR in kvm_arch_vcpu_load().
Signed-off-by: Chao Du <duchao@eswincomputing.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240402062628.5425-2-duchao@eswincomputing.comSigned-off-by: Anup Patel <anup@brainfault.org>

Pull x86 fixes from Ingo Molnar:

 - Fix MCE timer reinit locking

 - Fix/improve CoCo guest random entropy pool init

 - Fix SEV-SNP late disable bugs

 - Fix false positive objtool build warning

 - Fix header dependency bug

 - Fix resctrl CPU offlining bug

* tag 'x86-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/retpoline: Add NOENDBR annotation to the SRSO dummy return thunk
  x86/mce: Make sure to grab mce_sysfs_mutex in set_bank()
  x86/CPU/AMD: Track SNP host status with cc_platform_*()
  x86/cc: Add cc_platform_set/_clear() helpers
  x86/kvm/Kconfig: Have KVM_AMD_SEV select ARCH_HAS_CC_PLATFORM
  x86/coco: Require seeding RNG with RDRAND on CoCo systems
  x86/numa/32: Include missing <asm/pgtable_areas.h>
  x86/resctrl: Fix uninitialized memory read when last CPU of domain goes offline

Pull timer fixes from Ingo Molnar:
 "Fix various timer bugs:

   - Fix a timer migration bug that may result in missed events

   - Fix timer migration group hierarchy event updates

   - Fix a PowerPC64 build warning

   - Fix a handful of DocBook annotation bugs"

* tag 'timers-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timers/migration: Return early on deactivation
  timers/migration: Fix ignored event due to missing CPU update
  vdso: Use CONFIG_PAGE_SHIFT in vdso/datapage.h
  timers: Fix text inconsistencies and spelling
  tick/sched: Fix struct tick_sched doc warnings
  tick/sched: Fix various kernel-doc warnings
  timers: Fix kernel-doc format and add Return values
  time/timekeeping: Fix kernel-doc warnings and typos
  time/timecounter: Fix inline documentation

Pull x86 perf fix from Ingo Molnar:
 "Fix a combined PEBS events bug on x86 Intel CPUs"

* tag 'perf-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/ds: Don't clear ->pebs_data_cfg for the last PEBS event

Pull nfsd fixes from Chuck Lever:

 - Address a slow memory leak with RPC-over-TCP

 - Prevent another NFS4ERR_DELAY loop during CREATE_SESSION

* tag 'nfsd-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  nfsd: hold a lighter-weight client reference over CB_RECALL_ANY
  SUNRPC: Fix a slow server-side memory leak with RPC-over-TCP

Pull i2c fix from Wolfram Sang:
 "A host driver build fix"

* tag 'i2c-for-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: pxa: hide unused icr_bits[] variable

Pull xfs fix from Chandan Babu:

 - Allow creating new links to special files which were not associated
   with a project quota

* tag 'xfs-6.9-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: allow cross-linking special files without project quota

Pull smb client fixes from Steve French:

 - fix to retry close to avoid potential handle leaks when server
   returns EBUSY

 - DFS fixes including a fix for potential use after free

 - fscache fix

 - minor strncpy cleanup

 - reconnect race fix

 - deal with various possible UAF race conditions tearing sessions down

* tag '6.9-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  smb: client: fix potential UAF in cifs_signal_cifsd_for_reconnect()
  smb: client: fix potential UAF in smb2_is_network_name_deleted()
  smb: client: fix potential UAF in is_valid_oplock_break()
  smb: client: fix potential UAF in smb2_is_valid_oplock_break()
  smb: client: fix potential UAF in smb2_is_valid_lease_break()
  smb: client: fix potential UAF in cifs_stats_proc_show()
  smb: client: fix potential UAF in cifs_stats_proc_write()
  smb: client: fix potential UAF in cifs_dump_full_key()
  smb: client: fix potential UAF in cifs_debug_files_proc_show()
  smb3: retrying on failed server close
  smb: client: serialise cifs_construct_tcon() with cifs_mount_mutex
  smb: client: handle DFS tcons in cifs_construct_tcon()
  smb: client: refresh referral without acquiring refpath_lock
  smb: client: guarantee refcounted children from parent session
  cifs: Fix caching to try to do open O_WRONLY as rdwr on server
  smb: client: fix UAF in smb2_reconnect_server()
  smb: client: replace deprecated strncpy with strscpy

srso_alias_untrain_ret() is special code, even if it is a dummy
which is called in the !SRSO case, so annotate it like its real
counterpart, to address the following objtool splat:

  vmlinux.o: warning: objtool: .export_symbol+0x2b290: data relocation to !ENDBR: srso_alias_untrain_ret+0x0

Fixes: 4535e1a4 ("x86/bugs: Fix the SRSO mitigation on Zen3/4")
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20240405144637.17908-1-bp@kernel.org

We want to fix:

  0e110732 ("x86/retpoline: Do the necessary fixup to the Zen3/4 srso return thunk for !SRSO")

So merge in Linus's latest into x86/urgent to have it available.
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'i2c-host-fixes-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current

An unused const variable kind of error has been fixed by placing
the definition of icr_bits[] inside the ifdef block where it is
used.

Merge tag 'firewire-fixes-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394

Pull firewire fixes from Takashi Sakamoto:
 "The firewire-ohci kernel module has a parameter for verbose kernel
  logging. It is well-known that it logs the spurious IRQ for bus-reset
  event due to the unmasked register for IRQ event. This update fixes
  the issue"

* tag 'firewire-fixes-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: ohci: mask bus reset interrupts between ISR and bottom half

In the FireWire OHCI interrupt handler, if a bus reset interrupt has
occurred, mask bus reset interrupts until bus_reset_work has serviced and
cleared the interrupt.

Normally, we always leave bus reset interrupts masked. We infer the bus
reset from the self-ID interrupt that happens shortly thereafter. A
scenario where we unmask bus reset interrupts was introduced in 2008 in
a007bb85: If
OHCI_PARAM_DEBUG_BUSRESETS (8) is set in the debug parameter bitmask, we
will unmask bus reset interrupts so we can log them.

irq_handler logs the bus reset interrupt. However, we can't clear the bus
reset event flag in irq_handler, because we won't service the event until
later. irq_handler exits with the event flag still set. If the
corresponding interrupt is still unmasked, the first bus reset will
usually freeze the system due to irq_handler being called again each
time it exits. This freeze can be reproduced by loading firewire_ohci
with "modprobe firewire_ohci debug=-1" (to enable all debugging output).
Apparently there are also some cases where bus_reset_work will get called
soon enough to clear the event, and operation will continue normally.

This freeze was first reported a few months after a007bb85 was committed,
but until now it was never fixed. The debug level could safely be set
to -1 through sysfs after the module was loaded, but this would be
ineffectual in logging bus reset interrupts since they were only
unmasked during initialization.

irq_handler will now leave the event flag set but mask bus reset
interrupts, so irq_handler won't be called again and there will be no
freeze. If OHCI_PARAM_DEBUG_BUSRESETS is enabled, bus_reset_work will
unmask the interrupt after servicing the event, so future interrupts
will be caught as desired.

As a side effect to this change, OHCI_PARAM_DEBUG_BUSRESETS can now be
enabled through sysfs in addition to during initial module loading.
However, when enabled through sysfs, logging of bus reset interrupts will
be effective only starting with the second bus reset, after
bus_reset_work has executed.
Signed-off-by: Adam Goldman <adamg@pobox.com>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>

Pull spi fixes from Mark Brown:
 "A few small driver specific fixes, the most important being the
  s3c64xx change which is likely to be hit during normal operation"

* tag 'spi-fix-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: mchp-pci1xxx: Fix a possible null pointer dereference in pci1xxx_spi_probe
  spi: spi-fsl-lpspi: remove redundant spi_controller_put call
  spi: s3c64xx: Use DMA mode from fifo size

Merge tag 'regulator-fix-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fix from Mark Brown:
 "One simple regualtor fix, fixing module autoloading on tps65132"

* tag 'regulator-fix-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: tps65132: Add of_match table

Pull regmap fixes from Mark Brown:
 "Richard found a nasty corner case in the maple tree code which he
  fixed, and also fixed a compiler warning which was showing up with the
  toolchain he uses and helpfully identified a possible incorrect error
  code which could have runtime impacts"

* tag 'regmap-fix-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: maple: Fix uninitialized symbol 'ret' warnings
  regmap: maple: Fix cache corruption in regcache_maple_drop()

Pull block fixes from Jens Axboe:

 - NVMe pull request via Keith:
      - Atomic queue limits fixes (Christoph)
      - Fabrics fixes (Hannes, Daniel)

 - Discard overflow fix (Li)

 - Cleanup fix for null_blk (Damien)

* tag 'block-6.9-20240405' of git://git.kernel.dk/linux:
  nvme-fc: rename free_ctrl callback to match name pattern
  nvmet-fc: move RCU read lock to nvmet_fc_assoc_exists
  nvmet: implement unique discovery NQN
  nvme: don't create a multipath node for zero capacity devices
  nvme: split nvme_update_zone_info
  nvme-multipath: don't inherit LBA-related fields for the multipath node
  block: fix overflow in blk_ioctl_discard()
  nullblk: Fix cleanup order in null_add_dev() error path

Pull io_uring fixes from Jens Axboe:

 - Backport of some fixes that came up during development of the 6.10
   io_uring patches. This includes some kbuf cleanups and reference
   fixes.

 - Disable multishot read if we don't have NOWAIT support on the target

 - Fix for a dependency issue with workqueue flushing

* tag 'io_uring-6.9-20240405' of git://git.kernel.dk/linux:
  io_uring/kbuf: hold io_buffer_list reference over mmap
  io_uring/kbuf: protect io_buffer_list teardown with a reference
  io_uring/kbuf: get rid of bl->is_ready
  io_uring/kbuf: get rid of lower BGID lists
  io_uring: use private workqueue for exit work
  io_uring: disable io-wq execution of multishot NOWAIT requests
  io_uring/rw: don't allow multishot reads without NOWAIT support

Pull SCSI fixes from James Bottomley:
 "The most important is the libsas fix, which is a problem for DMA to a
  kmalloc'd structure too small causing cache line interference. The
  other fixes (all in drivers) are mostly for allocation length fixes,
  error leg unwinding, suspend races and a missing retry"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: core: Fix MCQ mode dev command timeout
  scsi: libsas: Align SMP request allocation to ARCH_DMA_MINALIGN
  scsi: sd: Unregister device if device_add_disk() failed in sd_probe()
  scsi: ufs: core: WLUN suspend dev/link state error recovery
  scsi: mylex: Fix sysfs buffer lengths

Pull devicetree fixes from Rob Herring:

 - Fix NIOS2 boot with external DTB

 - Add missing synchronization needed between fw_devlink and DT overlay
   removals

 - Fix some unit-address regex's to be hex only

 - Drop some 10+ year old "unstable binding" statements

 - Add new SoCs to QCom UFS binding

 - Add TPM bindings to TPM maintainers

* tag 'devicetree-fixes-for-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  nios2: Only use built-in devicetree blob if configured to do so
  dt-bindings: timer: narrow regex for unit address to hex numbers
  dt-bindings: soc: fsl: narrow regex for unit address to hex numbers
  dt-bindings: remoteproc: ti,davinci: remove unstable remark
  dt-bindings: clock: ti: remove unstable remark
  dt-bindings: clock: keystone: remove unstable remark
  of: module: prevent NULL pointer dereference in vsnprintf()
  dt-bindings: ufs: qcom: document SM6125 UFS
  dt-bindings: ufs: qcom: document SC7180 UFS
  dt-bindings: ufs: qcom: document SC8180X UFS
  of: dynamic: Synchronize of_changeset_destroy() with the devlink removals
  driver core: Introduce device_link_wait_removal()
  docs: dt-bindings: add missing address/size-cells to example
  MAINTAINERS: Add TPM DT bindings to TPM maintainers