- 12 Jun, 2017 5 commits
-
-
Minwoo Im authored
AHCI 1.3.1 Spec says that software shall build two H2D register FISes in the command list to send a software reset. The comments in ahci_do_softreset() is currently D2H instead of H2D. Signed-off-by:
Minwoo Im <dn3108@gmail.com> Signed-off-by:
Tejun Heo <tj@kernel.org>
-
Bhumika Goyal authored
ata_port_info structures are either copied to other objects or their references are stored in objects of type const. So, ata_port_info structures having similar usage pattern can be made const. Signed-off-by:
Bhumika Goyal <bhumirks@gmail.com> Signed-off-by:
-
Linus Walleij authored
This adds a driver for the Faraday Technology FTIDE010 PATA IP block. When used with the Storlink/Storm/Cortina Systems Gemini SoC, the PATA interface is accompanied by a PATA<->SATA bridge, so while the device appear as a PATA controller, it attaches physically to SATA disks, and also has a designated memory area with registers to set up the bridge. The Gemini SATA bridge is separated into its own driver file to make things modular and make it possible to reuse the PATA driver as stand-alone on other systems than the Gemini. dmesg excerpt from the D-Link DIR-685 storage router: gemini-sata-bridge 46000000.sata: SATA ID 00000e00, PHY ID: 01000100 gemini-sata-bridge 46000000.sata: set up the Gemini IDE/SATA nexus ftide010 63000000.ata: set up Gemini PATA0 ftide010 63000000.ata: device ID 00000500, irq 26, io base 0x63000000 ftide010 63000000.ata: SATA0 (master) start gemini-sata-bridge 46000000.sata: SATA0 PHY ready scsi host0: pata-ftide010 ata1: PATA max UDMA/133 irq 26 ata1.00: ATA-8: INTEL SSDSA2CW120G3, 4PC10302, max UDMA/133 ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2CW12 0302 PQ: 0 ANSI: 5 ata1.00: Enabling discard_zeroes_data sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata1.00: Enabling discard_zeroes_data ata1.00: Enabling discard_zeroes_data sd 0:0:0:0: [sda] Attached SCSI disk After this I can flawlessly mount and read/write copy etc files from /dev/sda[n]. Cc: John Feng-Hsin Chiang <john453@faraday-tech.com> Cc: Greentime Hu <green.hu@gmail.com> Acked-by:Hans Ulli Kroll <ulli.kroll@googlemail.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Acked-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
Linus Walleij authored
This adds device tree bindings for the Cortina Systems Gemini PATA to SATA bridge. Cc: devicetree@vger.kernel.org Cc: John Feng-Hsin Chiang <john453@faraday-tech.com> Cc: Greentime Hu <green.hu@gmail.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Linus Walleij authored
This adds device tree bindings for the Faraday Technology FTIDE010 found in the Storlink/Storm/Cortina Systems Gemini SoC. I am not 100% sure that this part is from Faraday Technology but a lot points in that direction: - A later IDE interface called FTIDE020 exist and share some properties. - The SATA bridge has the same Built In Self Test (BIST) that the Faraday FTSATA100 seems to have, and it has version number 0100 in the device ID register, so this is very likely a FTSATA100 bundled with the FTIDE010. Cc: devicetree@vger.kernel.org Cc: John Feng-Hsin Chiang <john453@faraday-tech.com> Cc: Greentime Hu <green.hu@gmail.com> Acked-by:
-
- 05 Jun, 2017 5 commits
-
-
Christoph Hellwig authored
This allows us to use the generic OPAL code with ATA devices. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Christoph Hellwig authored
tj: Updated line continuation style for consistency as pointed out by Sergei. Signed-off-by: -
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
It is core functionality, and only one of the users is in the EH code. Signed-off-by:
-
- 02 Jun, 2017 1 commit
-
-
Yuantian Tang authored
Ls1088a is new introduced arm-based soc with sata support with following features: * Complies with the serial ATA 3.0 specification and the AHCI 1.3.1 specification * Contains a high-speed descriptor-based DMA controller * Supports the following: * Speeds of 1.5 Gb/s (first-generation SATA), 3 Gb/s (second-generation SATA), and 6 Gb/s (third-generation SATA) * FIS-based switching * Native command queuing (NCQ) commands * Port multiplier operation * Asynchronous notification * SATA Vendor BIST mode Signed-off-by:
Tang Yuantian <andy.tang@nxp.com> Signed-off-by:
-
- 30 May, 2017 6 commits
-
-
Linus Walleij authored
ata_host_alloc_pinfo() assigns the host pointer to the struct device * drvdata, do not assign it a second time. Signed-off-by:
-
Linus Walleij authored
ata_host_alloc_pinfo() assigns the host pointer to the struct device * drvdata, do not assign it a second time. Signed-off-by:
-
Linus Walleij authored
ata_host_alloc_pinfo() assigns the host pointer to the struct device * drvdata, do not assign it a second time. Signed-off-by:
-
Linus Walleij authored
ata_host_alloc_pinfo() assigns the host pointer to the struct device * drvdata, do not assign it a second time. Signed-off-by:
-
Linus Walleij authored
ata_host_alloc_pinfo() assigns the host pointer to the struct device * drvdata, do not assign drv_data like this. Since ata_host_alloc_pinfo() is called after this site, the correct value is set eventually, but this assignment is just plain pointless. Signed-off-by:
-
Linus Walleij authored
ata_host_alloc_pinfo() assigns the host pointer to the struct device * drvdata, do not assign it a second time. Signed-off-by:
-
- 16 May, 2017 3 commits
-
-
Mauro Carvalho Chehab authored
The libata documentation is now using ReST. Update references to it to point to the new place. Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Acked-by:
-
Mauro Carvalho Chehab authored
Sphinx got confused with the markup identation: ./drivers/ata/libata-scsi.c:3402: ERROR: Unexpected indentation. No functional changes. Signed-off-by:
-
Tycho Andersen authored
The XPFO [1] patchset may unmap pages from physmap if they happened to be destined for userspace. If such a page is unmapped, it needs to be remapped. Rather than test if a page is in the highmem/xpfo unmapped state, Christoph suggested [2] that we simply always map the page. v2: * drop comment about bounce buffer * don't save IRQs before kmap/unmap * formatting [1]: https://lkml.org/lkml/2016/11/4/245 [2]: https://lkml.org/lkml/2016/11/4/253Suggested-and-reviewed-by:Christoph Hellwig <hch@infradead.org> Signed-off-by:
Tycho Andersen <tycho@docker.com> CC: Juerg Haefliger <juerg.haefliger@hpe.com> Signed-off-by:
-
- 15 May, 2017 14 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Track alignment in BPF verifier so that legitimate programs won't be rejected on !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS architectures. 2) Make tail calls work properly in arm64 BPF JIT, from Deniel Borkmann. 3) Make the configuration and semantics Generic XDP make more sense and don't allow both generic XDP and a driver specific instance to be active at the same time. Also from Daniel. 4) Don't crash on resume in xen-netfront, from Vitaly Kuznetsov. 5) Fix use-after-free in VRF driver, from Gao Feng. 6) Use netdev_alloc_skb_ip_align() to avoid unaligned IP headers in qca_spi driver, from Stefan Wahren. 7) Always run cleanup routines in BPF samples when we get SIGTERM, from Andy Gospodarek. 8) The mdio phy code should bring PHYs out of reset using the shared GPIO lines before invoking bus->reset(). From Florian Fainelli. 9) Some USB descriptor access endian fixes in various drivers from Johan Hovold. 10) Handle PAUSE advertisements properly in mlx5 driver, from Gal Pressman. 11) Fix reversed test in mlx5e_setup_tc(), from Saeed Mahameed. 12) Cure netdev leak in AF_PACKET when using timestamping via control messages. From Douglas Caetano dos Santos. 13) netcp doesn't support HWTSTAMP_FILTER_ALl, reject it. From Miroslav Lichvar. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits) ldmvsw: stop the clean timer at beginning of remove ldmvsw: unregistering netdev before disable hardware net: netcp: fix check of requested timestamping filter ipv6: avoid dad-failures for addresses with NODAD qed: Fix uninitialized data in aRFS infrastructure mdio: mux: fix device_node_continue.cocci warnings net/packet: fix missing net_device reference release net/mlx4_core: Use min3 to select number of MSI-X vectors macvlan: Fix performance issues with vlan tagged packets net: stmmac: use correct pointer when printing normal descriptor ring net/mlx5: Use underlay QPN from the root name space net/mlx5e: IPoIB, Only support regular RQ for now net/mlx5e: Fix setup TC ndo net/mlx5e: Fix ethtool pause support and advertise reporting net/mlx5e: Use the correct pause values for ethtool advertising vmxnet3: ensure that adapter is in proper state during force_close sfc: revert changes to NIC revision numbers net: ch9200: add missing USB-descriptor endianness conversions net: irda: irda-usb: fix firmware name on big-endian hosts net: dsa: mv88e6xxx: add default case to switch ... -
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "A set of minor cifs fixes" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: [CIFS] Minor cleanup of xattr query function fs: cifs: transport: Use time_after for time comparison SMB2: Fix share type handling cifs: cifsacl: Use a temporary ops variable to reduce code length Don't delay freeing mids when blocked on slow socket write of request CIFS: silence lockdep splat in cifs_relock_file()
-
David S. Miller authored
Shannon Nelson says: ==================== ldmvsw: port removal stability Under heavy reboot stress testing we found a couple of timing issues when removing the device that could cause the kernel great heartburn, addressed by these two patches. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Shannon Nelson authored
Stop the clean timer earlier to be sure there's no asynchronous interference while stopping the port. Orabug: 25748241 Signed-off-by:
Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by:
-
Thomas Tai authored
When running LDom binding/unbinding test, kernel may panic in ldmvsw_open(). It is more likely that because we're removing the ldc connection before unregistering the netdev in vsw_port_remove(), we set up a window of time where one process could be removing the device while another trying to UP the device. This also sometimes causes vio handshake error due to opening a device without closing it completely. We should unregister the netdev before we disable the "hardware". Orabug: 25980913, 25925306 Signed-off-by:
Thomas Tai <thomas.tai@oracle.com> Signed-off-by:
-
Miroslav Lichvar authored
The driver doesn't support timestamping of all received packets and should return error when trying to enable the HWTSTAMP_FILTER_ALL filter. Cc: WingMan Kwok <w-kwok2@ti.com> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by:
Miroslav Lichvar <mlichvar@redhat.com> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2017-05-12 This series contains some mlx5 fixes for net. Please pull and let me know if there's any problem. For -stable: ("net/mlx5e: Fix ethtool pause support and advertise reporting") kernels >= 4.8 ("net/mlx5e: Use the correct pause values for ethtool advertising") kernels >= 4.8 v1->v2: Dropped statistics spinlock patch, it needs some extra work. ==================== Signed-off-by: -
Mahesh Bandewar authored
Every address gets added with TENTATIVE flag even for the addresses with IFA_F_NODAD flag and dad-work is scheduled for them. During this DAD process we realize it's an address with NODAD and complete the process without sending any probe. However the TENTATIVE flags stays on the address for sometime enough to cause misinterpretation when we receive a NS. While processing NS, if the address has TENTATIVE flag, we mark it DADFAILED and endup with an address that was originally configured as NODAD with DADFAILED. We can't avoid scheduling dad_work for addresses with NODAD but we can avoid adding TENTATIVE flag to avoid this racy situation. Signed-off-by:
Mahesh Bandewar <maheshb@google.com> Acked-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Mintz, Yuval authored
Current memset is using incorrect type of variable, causing the upper-half of the strucutre to be left uninitialized and causing: ethernet/qlogic/qed/qed_init_fw_funcs.c: In function 'qed_set_rfs_mode_disable': ethernet/qlogic/qed/qed_init_fw_funcs.c:993:3: error: '*((void *)&ramline+4)' is used uninitialized in this function [-Werror=uninitialized] Fixes: d51e4af5 ("qed: aRFS infrastructure support") Reported-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Yuval Mintz <Yuval.Mintz@cavium.com> Reviewed-by:
-
Julia Lawall authored
Device node iterators put the previous value of the index variable, so an explicit put causes a double put. In particular, of_mdiobus_register can fail before doing anything interesting, so one could view it as a no-op from the reference count point of view. Generated by: scripts/coccinelle/iterators/device_node_continue.cocci CC: Jon Mason <jon.mason@broadcom.com> Signed-off-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Douglas Caetano dos Santos authored
When using a TX ring buffer, if an error occurs processing a control message (e.g. invalid message), the net_device reference is not released. Fixes c14ac945 ("sock: enable timestamping using control messages") Signed-off-by:
Douglas Caetano dos Santos <douglascs@taghos.com.br> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
-
yuval.shaia@oracle.com authored
Signed-off-by:
Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Vlad Yasevich authored
Macvlan always turns on offload features that have sofware fallback (NETIF_GSO_SOFTWARE). This allows much higher guest-guest communications over macvtap. However, macvtap does not turn on these features for vlan tagged traffic. As a result, depending on the HW that mactap is configured on, the performance of guest-guest communication over a vlan is very inconsistent. If the HW supports TSO/UFO over vlans, then the performance will be fine. If not, the the performance will suffer greatly since the VM may continue using TSO/UFO, and will force the host segment the traffic and possibly overlow the macvtap queue. This patch adds the always on offloads to vlan_features. This makes sure that any vlan tagged traffic between 2 guest will not be segmented needlessly. Signed-off-by:
Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by:
-
Niklas Cassel authored
There are two pointers in sysfs_display_ring, one that increments if using normal dma descriptors, another if using extended dma descriptors. When printing the normal dma descriptors, the wrong pointer is used, thus the printed descriptor addresses are incorrect. Signed-off-by:
Niklas Cassel <niklas.cassel@axis.com> Signed-off-by:
-
- 14 May, 2017 5 commits
-
-
Yishai Hadas authored
Root flow table is dynamically changed by the underlying flow steering layer, and IPoIB/ULPs have no idea what will be the root flow table in the future, hence we need a dynamic infrastructure to move Underlay QPs with the root flow table. Fixes: b3ba5149 ("net/mlx5: Refactor create flow table method to accept underlay QP") Signed-off-by:
Erez Shitrit <erezsh@mellanox.com> Signed-off-by:
Maor Gottlieb <maorg@mellanox.com> Signed-off-by:
Yishai Hadas <yishaih@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Saeed Mahameed authored
IPoIB doesn't support striding RQ at the moment, for this we need to explicitly choose non striding RQ in IPoIB init, even if the HW supports it. Fixes: 8f493ffd ("net/mlx5e: IPoIB, RX steering RSS RQTs and TIRs") Signed-off-by:
-
Saeed Mahameed authored
Fail-safe support patches introduced a trivial bug, setup tc callback is doing a wrong check of the netdevice state, the fix is simply to invert the condition. Fixes: 6f9485af ("net/mlx5e: Fail safe tc setup") Signed-off-by:
-
Gal Pressman authored
Pause bit should set when RX pause is on, not TX pause. Also, setting Asym_Pause is incorrect, and should be turned off. Fixes: 665bc539 ("net/mlx5e: Use new ethtool get/set link ksettings API") Signed-off-by:
Gal Pressman <galp@mellanox.com> Cc: kernel-team@fb.com Signed-off-by:
-
Gal Pressman authored
Query the operational pause from firmware (PFCC register) instead of always passing zeros. Fixes: 665bc539 ("net/mlx5e: Use new ethtool get/set link ksettings API") Signed-off-by:
-
- 13 May, 2017 1 commit
-
-
Linus Torvalds authored
-
