Skip to content

L
linux
Switch branch/tag
  1. 14 Feb, 2020 32 commits
  3. 11 Feb, 2020 8 commits
    • Greg Kroah-Hartman's avatar
      Linux 4.19.103 · 35766839
      Greg Kroah-Hartman authored
      35766839
    • David Howells's avatar
      rxrpc: Fix service call disconnection · 06748661
      David Howells authored 
      [ Upstream commit b39a934e ]

The recent patch that substituted a flag on an rxrpc_call for the
connection pointer being NULL as an indication that a call was disconnected
puts the set_bit in the wrong place for service calls.  This is only a
problem if a call is implicitly terminated by a new call coming in on the
same connection channel instead of a terminating ACK packet.

In such a case, rxrpc_input_implicit_end_call() calls
__rxrpc_disconnect_call(), which is now (incorrectly) setting the
disconnection bit, meaning that when rxrpc_release_call() is later called,
it doesn't call rxrpc_disconnect_call() and so the call isn't removed from
the peer's error distribution list and the list gets corrupted.

KASAN finds the issue as an access after release on a call, but the
position at which it occurs is confusing as it appears to be related to a
different call (the call site is where the latter call is being removed
from the error distribution list and either the next or pprev pointer
points to a previously released call).

Fix this by moving the setting of the flag from __rxrpc_disconnect_call()
to rxrpc_disconnect_call() in the same place that the connection pointer
was being cleared.

Fixes: 5273a191 ("rxrpc: Fix NULL pointer deref due to call->conn being cleared on disconnect")
Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      06748661
    • Song Liu's avatar
      perf/core: Fix mlock accounting in perf_mmap() · a3623db4
      Song Liu authored 
      commit 00346155 upstream.

Decreasing sysctl_perf_event_mlock between two consecutive perf_mmap()s of
a perf ring buffer may lead to an integer underflow in locked memory
accounting. This may lead to the undesired behaviors, such as failures in
BPF map creation.

Address this by adjusting the accounting logic to take into account the
possibility that the amount of already locked memory may exceed the
current limit.

Fixes: c4b75479 ("perf/core: Make the mlock accounting simple again")
Suggested-by: default avatarAlexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: default avatarSong Liu <songliubraving@fb.com>
Signed-off-by: default avatarPeter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: default avatarIngo Molnar <mingo@kernel.org>
Cc: <stable@vger.kernel.org>
Acked-by: default avatarAlexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lkml.kernel.org/r/20200123181146.2238074-1-songliubraving@fb.comSigned-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      a3623db4
    • Konstantin Khlebnikov's avatar
      clocksource: Prevent double add_timer_on() for watchdog_timer · 6284d30e
      Konstantin Khlebnikov authored 
      commit febac332 upstream.

Kernel crashes inside QEMU/KVM are observed:

  kernel BUG at kernel/time/timer.c:1154!
  BUG_ON(timer_pending(timer) || !timer->function) in add_timer_on().

At the same time another cpu got:

  general protection fault: 0000 [#1] SMP PTI of poinson pointer 0xdead000000000200 in:

  __hlist_del at include/linux/list.h:681
  (inlined by) detach_timer at kernel/time/timer.c:818
  (inlined by) expire_timers at kernel/time/timer.c:1355
  (inlined by) __run_timers at kernel/time/timer.c:1686
  (inlined by) run_timer_softirq at kernel/time/timer.c:1699

Unfortunately kernel logs are badly scrambled, stacktraces are lost.

Printing the timer->function before the BUG_ON() pointed to
clocksource_watchdog().

The execution of clocksource_watchdog() can race with a sequence of
clocksource_stop_watchdog() .. clocksource_start_watchdog():

expire_timers()
 detach_timer(timer, true);
  timer->entry.pprev = NULL;
 raw_spin_unlock_irq(&base->lock);
 call_timer_fn
  clocksource_watchdog()

					clocksource_watchdog_kthread() or
					clocksource_unbind()

					spin_lock_irqsave(&watchdog_lock, flags);
					clocksource_stop_watchdog();
					 del_timer(&watchdog_timer);
					 watchdog_running = 0;
					spin_unlock_irqrestore(&watchdog_lock, flags);

					spin_lock_irqsave(&watchdog_lock, flags);
					clocksource_start_watchdog();
					 add_timer_on(&watchdog_timer, ...);
					 watchdog_running = 1;
					spin_unlock_irqrestore(&watchdog_lock, flags);

  spin_lock(&watchdog_lock);
  add_timer_on(&watchdog_timer, ...);
   BUG_ON(timer_pending(timer) || !timer->function);
    timer_pending() -> true
    BUG()

I.e. inside clocksource_watchdog() watchdog_timer could be already armed.

Check timer_pending() before calling add_timer_on(). This is sufficient as
all operations are synchronized by watchdog_lock.

Fixes: 75c5158f ("timekeeping: Update clocksource with stop_machine")
Signed-off-by: default avatarKonstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/158048693917.4378.13823603769948933793.stgit@buzzSigned-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      6284d30e
    • Thomas Gleixner's avatar
      x86/apic/msi: Plug non-maskable MSI affinity race · 032a2bf9
      Thomas Gleixner authored 
      commit 6f1a4891 upstream.

Evan tracked down a subtle race between the update of the MSI message and
the device raising an interrupt internally on PCI devices which do not
support MSI masking. The update of the MSI message is non-atomic and
consists of either 2 or 3 sequential 32bit wide writes to the PCI config
space.

   - Write address low 32bits
   - Write address high 32bits (If supported by device)
   - Write data

When an interrupt is migrated then both address and data might change, so
the kernel attempts to mask the MSI interrupt first. But for MSI masking is
optional, so there exist devices which do not provide it. That means that
if the device raises an interrupt internally between the writes then a MSI
message is sent built from half updated state.

On x86 this can lead to spurious interrupts on the wrong interrupt
vector when the affinity setting changes both address and data. As a
consequence the device interrupt can be lost causing the device to
become stuck or malfunctioning.

Evan tried to handle that by disabling MSI accross an MSI message
update. That's not feasible because disabling MSI has issues on its own:

 If MSI is disabled the PCI device is routing an interrupt to the legacy
 INTx mechanism. The INTx delivery can be disabled, but the disablement is
 not working on all devices.

 Some devices lose interrupts when both MSI and INTx delivery are disabled.

Another way to solve this would be to enforce the allocation of the same
vector on all CPUs in the system for this kind of screwed devices. That
could be done, but it would bring back the vector space exhaustion problems
which got solved a few years ago.

Fortunately the high address (if supported by the device) is only relevant
when X2APIC is enabled which implies interrupt remapping. In the interrupt
remapping case the affinity setting is happening at the interrupt remapping
unit and the PCI MSI message is programmed only once when the PCI device is
initialized.

That makes it possible to solve it with a two step update:

  1) Target the MSI msg to the new vector on the current target CPU

  2) Target the MSI msg to the new vector on the new target CPU

In both cases writing the MSI message is only changing a single 32bit word
which prevents the issue of inconsistency.

After writing the final destination it is necessary to check whether the
device issued an interrupt while the intermediate state #1 (new vector,
current CPU) was in effect.

This is possible because the affinity change is always happening on the
current target CPU. The code runs with interrupts disabled, so the
interrupt can be detected by checking the IRR of the local APIC. If the
vector is pending in the IRR then the interrupt is retriggered on the new
target CPU by sending an IPI for the associated vector on the target CPU.

This can cause spurious interrupts on both the local and the new target
CPU.

 1) If the new vector is not in use on the local CPU and the device
    affected by the affinity change raised an interrupt during the
    transitional state (step #1 above) then interrupt entry code will
    ignore that spurious interrupt. The vector is marked so that the
    'No irq handler for vector' warning is supressed once.

 2) If the new vector is in use already on the local CPU then the IRR check
    might see an pending interrupt from the device which is using this
    vector. The IPI to the new target CPU will then invoke the handler of
    the device, which got the affinity change, even if that device did not
    issue an interrupt

 3) If the new vector is in use already on the local CPU and the device
    affected by the affinity change raised an interrupt during the
    transitional state (step #1 above) then the handler of the device which
    uses that vector on the local CPU will be invoked.

expose issues in device driver interrupt handlers which are not prepared to
handle a spurious interrupt correctly. This not a regression, it's just
exposing something which was already broken as spurious interrupts can
happen for a lot of reasons and all driver handlers need to be able to deal
with them.
Reported-by: default avatarEvan Green <evgreen@chromium.org>
Debugged-by: default avatarEvan Green <evgreen@chromium.org>
Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
Tested-by: default avatarEvan Green <evgreen@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87imkr4s7n.fsf@nanos.tec.linutronix.deSigned-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      032a2bf9
    • Ronnie Sahlberg's avatar
      cifs: fail i/o on soft mounts if sessionsetup errors out · 71a47ed6
      Ronnie Sahlberg authored 
      commit b0dd940e upstream.

RHBZ: 1579050

If we have a soft mount we should fail commands for session-setup
failures (such as the password having changed/ account being deleted/ ...)
and return an error back to the application.
Signed-off-by: default avatarRonnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: default avatarSteve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      71a47ed6
    • David Hildenbrand's avatar
      mm/page_alloc.c: fix uninitialized memmaps on a partially populated last section · 0a69047d
      David Hildenbrand authored 
      [ Upstream commit e822969c ]

Patch series "mm: fix max_pfn not falling on section boundary", v2.

Playing with different memory sizes for a x86-64 guest, I discovered that
some memmaps (highest section if max_mem does not fall on the section
boundary) are marked as being valid and online, but contain garbage.  We
have to properly initialize these memmaps.

Looking at /proc/kpageflags and friends, I found some more issues,
partially related to this.

This patch (of 3):

If max_pfn is not aligned to a section boundary, we can easily run into
BUGs.  This can e.g., be triggered on x86-64 under QEMU by specifying a
memory size that is not a multiple of 128MB (e.g., 4097MB, but also
4160MB).  I was told that on real HW, we can easily have this scenario
(esp., one of the main reasons sub-section hotadd of devmem was added).

The issue is, that we have a valid memmap (pfn_valid()) for the whole
section, and the whole section will be marked "online".
pfn_to_online_page() will succeed, but the memmap contains garbage.

E.g., doing a "./page-types -r -a 0x144001" when QEMU was started with "-m
4160M" - (see tools/vm/page-types.c):

[  200.476376] BUG: unable to handle page fault for address: fffffffffffffffe
[  200.477500] #PF: supervisor read access in kernel mode
[  200.478334] #PF: error_code(0x0000) - not-present page
[  200.479076] PGD 59614067 P4D 59614067 PUD 59616067 PMD 0
[  200.479557] Oops: 0000 [#4] SMP NOPTI
[  200.479875] CPU: 0 PID: 603 Comm: page-types Tainted: G      D W         5.5.0-rc1-next-20191209 #93
[  200.480646] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu4
[  200.481648] RIP: 0010:stable_page_flags+0x4d/0x410
[  200.482061] Code: f3 ff 41 89 c0 48 b8 00 00 00 00 01 00 00 00 45 84 c0 0f 85 cd 02 00 00 48 8b 53 08 48 8b 2b 48f
[  200.483644] RSP: 0018:ffffb139401cbe60 EFLAGS: 00010202
[  200.484091] RAX: fffffffffffffffe RBX: fffffbeec5100040 RCX: 0000000000000000
[  200.484697] RDX: 0000000000000001 RSI: ffffffff9535c7cd RDI: 0000000000000246
[  200.485313] RBP: ffffffffffffffff R08: 0000000000000000 R09: 0000000000000000
[  200.485917] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000144001
[  200.486523] R13: 00007ffd6ba55f48 R14: 00007ffd6ba55f40 R15: ffffb139401cbf08
[  200.487130] FS:  00007f68df717580(0000) GS:ffff9ec77fa00000(0000) knlGS:0000000000000000
[  200.487804] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  200.488295] CR2: fffffffffffffffe CR3: 0000000135d48000 CR4: 00000000000006f0
[  200.488897] Call Trace:
[  200.489115]  kpageflags_read+0xe9/0x140
[  200.489447]  proc_reg_read+0x3c/0x60
[  200.489755]  vfs_read+0xc2/0x170
[  200.490037]  ksys_pread64+0x65/0xa0
[  200.490352]  do_syscall_64+0x5c/0xa0
[  200.490665]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

But it can be triggered much easier via "cat /proc/kpageflags > /dev/null"
after cold/hot plugging a DIMM to such a system:

[root@localhost ~]# cat /proc/kpageflags > /dev/null
[  111.517275] BUG: unable to handle page fault for address: fffffffffffffffe
[  111.517907] #PF: supervisor read access in kernel mode
[  111.518333] #PF: error_code(0x0000) - not-present page
[  111.518771] PGD a240e067 P4D a240e067 PUD a2410067 PMD 0

This patch fixes that by at least zero-ing out that memmap (so e.g.,
page_to_pfn() will not crash).  Commit 907ec5fc ("mm: zero remaining
unavailable struct pages") tried to fix a similar issue, but forgot to
consider this special case.

After this patch, there are still problems to solve.  E.g., not all of
these pages falling into a memory hole will actually get initialized later
and set PageReserved - they are only zeroed out - but at least the
immediate crashes are gone.  A follow-up patch will take care of this.

Link: http://lkml.kernel.org/r/20191211163201.17179-2-david@redhat.com
Fixes: f7f99100 ("mm: stop zeroing memory during allocation in vmemmap")
Signed-off-by: default avatarDavid Hildenbrand <david@redhat.com>
Tested-by: default avatarDaniel Jordan <daniel.m.jordan@oracle.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Steven Sistare <steven.sistare@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Bob Picco <bob.picco@oracle.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: <stable@vger.kernel.org>	[4.15+]
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      0a69047d
    • Pavel Tatashin's avatar
      mm: return zero_resv_unavail optimization · f19a50c1
      Pavel Tatashin authored 
      [ Upstream commit ec393a0f ]

When checking for valid pfns in zero_resv_unavail(), it is not necessary
to verify that pfns within pageblock_nr_pages ranges are valid, only the
first one needs to be checked.  This is because memory for pages are
allocated in contiguous chunks that contain pageblock_nr_pages struct
pages.

Link: http://lkml.kernel.org/r/20181002143821.5112-3-msys.mizuma@gmail.comSigned-off-by: default avatarPavel Tatashin <pavel.tatashin@microsoft.com>
Signed-off-by: default avatarMasayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: default avatarMasayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Acked-by: default avatarNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: default avatarOscar Salvador <osalvador@suse.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      f19a50c1
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7