- 15 Feb, 2015 7 commits
-
-
Jason Wang authored
In commit ba7438ae ("vhost: don't bother copying iovecs in handle_rx(), kill memcpy_toiovecend()"), we advance iov iter fixup sizeof(struct virtio_net_hdr) bytes and fill the number of buffers after doing the socket recvmsg(). This work well but was broken after commit 6e03f896 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net") which tries to advance sizeof(struct virtio_net_hdr_mrg_rxbuf). It will fill the number of buffers at the wrong place. This patch fixes this. Fixes 6e03f896 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net") Cc: David S. Miller <davem@davemloft.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Spelling errors caught by codespell. Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
Masanari Iida authored
This patch fix following warning wile make xmldocs. Warning(.//net/core/dev.c:5345): No description found for parameter 'bonding_info' Warning(.//net/core/dev.c:5345): Excess function parameter 'netdev_bonding_info' description in 'netdev_bonding_info_change' This warning starts to appear after following patch was added into Linus's tree during merger period. commit 61bd3857 net/core: Add event for a change in slave state Signed-off-by:
Masanari Iida <standby24x7@gmail.com> Signed-off-by:
-
Sylvain Rochet authored
NAND-tree is used to check wiring between MAC and PHY using NAND gates on the PHY side, hence the name. NAND-tree initial status is latched at reset by probing the IRQ pin. However some devices are sharing the PHY IRQ pin with other peripherals such as Atmel SAMA5D[34]x-EK boards when using the optional TM7000 display module, therefore they are switching the PHY in NAND-tree test mode depending on the current IRQ line status at reset. This patch ensure PHY is not in NAND-tree test mode for all Micrel PHYs using IRQ line as a NAND-tree toggle mode at reset. Signed-off-by:
Sylvain Rochet <sylvain.rochet@finsecur.com> Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
-
Martin KaFai Lau authored
ipv6_cow_metrics() currently assumes only DST_HOST routes require dynamic metrics allocation from inetpeer. The assumption breaks when ndisc discovered router with RTAX_MTU and RTAX_HOPLIMIT metric. Refer to ndisc_router_discovery() in ndisc.c and note that dst_metric_set() is called after the route is created. This patch creates the metrics array (by calling dst_cow_metrics_generic) in ipv6_cow_metrics(). Test: radvd.conf: interface qemubr0 { AdvLinkMTU 1300; AdvCurHopLimit 30; prefix fd00:face:face:face::/64 { AdvOnLink on; AdvAutonomous on; AdvRouterAddr off; }; }; Before: [root@qemu1 ~]# ip -6 r show | egrep -v unreachable fd00:face:face:face::/64 dev eth0 proto kernel metric 256 expires 27sec fe80::/64 dev eth0 proto kernel metric 256 default via fe80::74df:d0ff:fe23:8ef2 dev eth0 proto ra metric 1024 expires 27sec After: [root@qemu1 ~]# ip -6 r show | egrep -v unreachable fd00:face:face:face::/64 dev eth0 proto kernel metric 256 expires 27sec mtu 1300 fe80::/64 dev eth0 proto kernel metric 256 mtu 1300 default via fe80::74df:d0ff:fe23:8ef2 dev eth0 proto ra metric 1024 expires 27sec mtu 1300 hoplimit 30 Fixes: 8e2ec639 (ipv6: don't use inetpeer to store metrics for routes.) Signed-off-by:Martin KaFai Lau <kafai@fb.com> Signed-off-by:
-
Pravin B Shelar authored
Fix typo where mask is used rather than key. Fixes: 74ed7ab9("openvswitch: Add support for unique flow IDs.") Reported-by:
Joe Stringer <joestringer@nicira.com> Signed-off-by:
Pravin B Shelar <pshelar@nicira.com> Acked-by:
-
hayeswang authored
There is a capability which let the hw could change the settings automatically when the power change to ON. However, the USB reset would reset the settings to the hw default, so the driver has to restore the relative settings. Otherwise, it would influence the functions of the hw, and the compatibility for the USB hub and USB host controller. The relative settings are as following. - set the power down scale to 96. - enable the power saving function of USB 2.0. - disable the ALDPS of ECM mode. - set burst mode depending on the burst size. - enable the flow control of endpoint full. - set fifo empty boundary to 32448 bytes. - enable the function of exiting LPM when Rx OK occurs. - set the connect timer to 1. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
-
- 13 Feb, 2015 2 commits
-
-
Aleksander Morgado authored
If skb allocation fails once the IP header has been received, the rx state is being set to WAIT_SYNC. The logic, though, shouldn't directly return, as the buffer may contain a full packet, and therefore the WAIT_SYNC state needs to be processed (resetting state to WAIT_IP, clearing rx_buf_size and re-initializing rx_buf_missing). So, just let the while loop continue so that in the next iteration the WAIT_SYNC state cleanly stops the loop. The WAIT_SYNC processing will be done just after that, only if the end of packet is flagged. Signed-off-by:
Aleksander Morgado <aleksander@aleksander.es> Signed-off-by:
-
Eric Dumazet authored
IPv6 can keep a copy of SYN message using skb_get() in tcp_v6_conn_request() so that caller wont free the skb when calling kfree_skb() later. Therefore TCP fast open has to clone the skb it is queuing in child->sk_receive_queue, as all skbs consumed from receive_queue are freed using __kfree_skb() (ie assuming skb->users == 1) Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Fixes: 5b7ed089 ("tcp: move fastopen functions to tcp_fastopen.c") Signed-off-by:
-
- 12 Feb, 2015 12 commits
-
-
Geert Uytterhoeven authored
If CONFIG_SYSCTL=n: net/bridge/br_netfilter.c: In function ‘br_netfilter_init’: net/bridge/br_netfilter.c:996: warning: label ‘err1’ defined but not used Move the label and the code after it inside the existing #ifdef to get rid of the warning. Signed-off-by:Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Jan Stancek authored
Use spin_lock_bh in ip6_fl_purge() to prevent following potentially deadlock scenario between ip6_fl_purge() and ip6_fl_gc() timer. ================================= [ INFO: inconsistent lock state ] 3.19.0 #1 Not tainted --------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. swapper/5/0 [HC0[0]:SC1[1]:HE1:SE0] takes: (ip6_fl_lock){+.?...}, at: [<ffffffff8171155d>] ip6_fl_gc+0x2d/0x180 {SOFTIRQ-ON-W} state was registered at: [<ffffffff810ee9a0>] __lock_acquire+0x4a0/0x10b0 [<ffffffff810efd54>] lock_acquire+0xc4/0x2b0 [<ffffffff81751d2d>] _raw_spin_lock+0x3d/0x80 [<ffffffff81711798>] ip6_flowlabel_net_exit+0x28/0x110 [<ffffffff815f9759>] ops_exit_list.isra.1+0x39/0x60 [<ffffffff815fa320>] cleanup_net+0x100/0x1e0 [<ffffffff810ad80a>] process_one_work+0x20a/0x830 [<ffffffff810adf4b>] worker_thread+0x11b/0x460 [<ffffffff810b42f4>] kthread+0x104/0x120 [<ffffffff81752bfc>] ret_from_fork+0x7c/0xb0 irq event stamp: 84640 hardirqs last enabled at (84640): [<ffffffff81752080>] _raw_spin_unlock_irq+0x30/0x50 hardirqs last disabled at (84639): [<ffffffff81751eff>] _raw_spin_lock_irq+0x1f/0x80 softirqs last enabled at (84628): [<ffffffff81091ad1>] _local_bh_enable+0x21/0x50 softirqs last disabled at (84629): [<ffffffff81093b7d>] irq_exit+0x12d/0x150 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(ip6_fl_lock); <Interrupt> lock(ip6_fl_lock); *** DEADLOCK *** Signed-off-by:Jan Stancek <jstancek@redhat.com> Signed-off-by:
-
Eric Dumazet authored
Cosmetic patch to add __percpu qualifier to pcpu_stats Signed-off-by:
-
Jun'ichi Nomura \(NEC\) authored
tg3_init_one() calls tg3_halt() without tp->lock despite its assumption and causes deadlock. If lockdep is enabled, a warning like this shows up before the stall: [ BUG: bad unlock balance detected! ] 3.19.0test #3 Tainted: G E ------------------------------------- insmod/369 is trying to release lock (&(&tp->lock)->rlock) at: [<ffffffffa02d5a1d>] tg3_chip_reset+0x14d/0x780 [tg3] but there are no more locks to release! tg3_init_one() doesn't call tg3_halt() under normal situation but during kexec kdump I hit this problem. Fixes: 932f19de ("tg3: Release tp->lock before invoking synchronize_irq()") Signed-off-by:
Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'wireless-drivers-for-davem-2015-02-11' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers rtlwifi: * remove superfluous warning message which is not needed anymore Signed-off-by:
-
Rafał Miłecki authored
On Northstar (Broadcom's ARM architecture) we need to manually enable all cores. Code for that is already in place, but the condition for it was wrong. Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Signed-off-by:
-
Shahed Shaikh authored
Driver keeps adding multicast addresses without deleting removed MACs and worrying about adapters filter limit. This results into actual count of programmed multicast addresses get accumulated over the time and overruns the adapter's filter limit without putting device in ACCEPT_ALL_MULTI mode. This causes newly added multicast traffic to fail after the sequence of addition - deletion in certain pattern. This issue is seen only when netdev's mcast list count is less than adapters mcast filter limit. e.g. If adapters multicast filter limit is 38 per function then following sequence would result in multicast traffic failure for newly added MACs. - add less than 38 multicast MACs - remove previously added multicast MACs - add new multicast MACs (less than 38) Signed-off-by:Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by:
-
Eli Cohen authored
The current code failed to configure the page size for architectures with page size different than 4K - PPC for example. Signed-off-by:
Carol L Soto <clsoto@us.ibm.com> Signed-off-by:
Eli Cohen <eli@mellanox.com> Signed-off-by:
-
David L Stevens authored
This patch unclones an skb for the case where the sunvnet driver needs to change the segmentation size so that it doesn't interfere with TCP SACK's use of them. Signed-off-by:
David L Stevens <david.stevens@oracle.com> Acked-by:
-
Vaishali Thakkar authored
This patch introduces the use of functions setup_timer and mod_timer. This is done using Coccinelle and semantic patch used for this as follows: // <smpl> @@ expression x,y,z,a,b; @@ -init_timer (&x); +setup_timer (&x, y, z); +mod_timer (&a, b); -x.function = y; -x.data = z; -x.expires = b; -add_timer(&a); // </smpl> Signed-off-by:
Vaishali Thakkar <vthakkar1994@gmail.com> Signed-off-by:
-
Geert Uytterhoeven authored
If CONFIG_NET_XGENE=y but CONFIG_OF=n: drivers/net/ethernet/apm/xgene/xgene_enet_main.c:1033: warning: ‘xgene_enet_of_match’ defined but not used Signed-off-by:
-
Nicholas Mc Guire authored
This is only an API consolidation and should make things more readable. Converting milliseconds to jiffies by "val * HZ / 1000" is technically OK but msecs_to_jiffies(val) is the cleaner solution and handles all corner cases correctly. This is a minor API cleanup only. Signed-off-by:
Nicholas Mc Guire <hofrat@osadl.org> Acked-by:
Mark Einon <mark.einon@gmail.com> Signed-off-by:
-
- 11 Feb, 2015 19 commits
-
-
David S. Miller authored
Tom Herbert says: ==================== net: Fixes to remote checksum offload and CHECKSUM_PARTIAL This patch set fixes a correctness problem with remote checksum offload, clarifies the meaning of CHECKSUM_PARTIAL, and allows remote checksum offload to set CHECKSUM_PARTIAL instead of calling csum_partial and modifying the checksum. Specifically: - In the GRO remote checksum path, restore the checksum after calling lower layer GRO functions. This is needed if the packet is forwarded off host with the Remote Checksum Offload option still present. - Clarify meaning of CHECKSUM PARTIAL in the receive path. Only the checksums referred to by checksum partial and any preceding checksums can be considered verified. - Fixes to UDP tunnel GRO complete. Need to set SKB_GSO_UDP_TUNNEL_*, SKB_GSO_TUNNEL_REMCSUM, and skb->encapsulation for forwarding case. - Infrastructure to allow setting of CHECKSUM_PARTIAL in remote checksum offload. This a potential performance benefit instead of calling csum_partial (potentially twice, once in GRO path and once in normal path). The downside of using CHECKSUM_PARTIAL and not actually writing the checksum is that we aren't verifying that the sender correctly wrote the pseudo checksum into the checksum field, or that the start/offset values actually point to a checksum. If the sender did not set up these fields correctly, a packet might be accepted locally, but not accepted by a peer when the packet is forwarded off host. Verifying these fields seems non-trivial, and because the fields can only be incorrect due to sender error and not corruption (outer checksum protects against that) we'll make use of CHECKSUM_PARTIAL the default. This behavior can be reverted as an netlink option on the encapsulation socket. - Change VXLAN and GUE to set CHECKSUM_PARTIAL in remote checksum offload by default, configuration hooks can revert to using csum_partial. Testing: I ran performance numbers using netperf TCP_STREAM and TCP_RR with 200 streams for GRE/GUE and for VXLAN. This compares before the fixes, the fixes with not setting checksum partial in remote checksum offload, and with the fixes setting checksum partial. The overall effect seems be that using checksum partial is a slight performance win, perf definitely shows a significant reduction of time in csum_partial on the receive CPUs. GRE/GUE TCP_STREAM Before fixes 9.22% TX CPU utilization 13.57% RX CPU utilization 9133 Mbps Not using checksum partial 9.59% TX CPU utilization 14.95% RX CPU utilization 9132 Mbps Using checksum partial 9.37% TX CPU utilization 13.89% RX CPU utilization 9132 Mbps TCP_RR Before fixes CPU utilization 159/251/447 90/95/99% latencies 1.1462e+06 tps Not using checksum partial 92.94% CPU utilization 158/253/445 90/95/99% latencies 1.12988e+06 tps Using checksum partial 92.78% CPU utilization 158/250/450 90/95/99% latencies 1.15343e+06 tps VXLAN TCP_STREAM Before fixes 9.24% TX CPU utilization 13.74% RX CPU utilization 9093 Mbps Not using checksum partial 9.95% TX CPU utilization 14.66% RX CPU utilization 9094 Mbps Using checksum partial 10.24% TX CPU utilization 13.32% RX CPU utilization 9093 Mbps TCP_RR Before fixes 92.91% CPU utilization 151/241/437 90/95/99% latencies 1.15939e+06 tps Not using checksum partial 93.07% CPU utilization 156/246/425 90/95/99% latencies 1.1451e+06 tps Using checksum partial 95.51% CPU utilization 156/249/459 90/95/99% latencies 1.17004e+06 tps ==================== Signed-off-by: -
Tom Herbert authored
Change remote checksum handling to set checksum partial as default behavior. Added an iflink parameter to configure not using checksum partial (calling csum_partial to update checksum). Signed-off-by:
Tom Herbert <therbert@google.com> Signed-off-by:
-
Tom Herbert authored
Change remote checksum handling to set checksum partial as default behavior. Added an iflink parameter to configure not using checksum partial (calling csum_partial to update checksum). Signed-off-by:
-
Tom Herbert authored
This patch adds infrastructure so that remote checksum offload can set CHECKSUM_PARTIAL instead of calling csum_partial and writing the modfied checksum field. Add skb_remcsum_adjust_partial function to set an skb for using CHECKSUM_PARTIAL with remote checksum offload. Changed skb_remcsum_process and skb_gro_remcsum_process to take a boolean argument to indicate if checksum partial can be set or the checksum needs to be modified using the normal algorithm. Signed-off-by:
-
Tom Herbert authored
This patch moves the free and same_flow fields to be bit fields (2 and 1 bit sized respectively). This frees up some space for u16's. Signed-off-by:
-
Tom Herbert authored
Properly set GSO types and skb->encapsulation in the UDP tunnel GRO complete so that packets are properly represented for GSO. This sets SKB_GSO_UDP_TUNNEL or SKB_GSO_UDP_TUNNEL_CSUM depending on whether non-zero checksums were received, and sets SKB_GSO_TUNNEL_REMCSUM if the remote checksum option was processed. Signed-off-by:
-
Tom Herbert authored
The current meaning of CHECKSUM_PARTIAL for validating checksums is that _all_ checksums in the packet are considered valid. However, in the manner that CHECKSUM_PARTIAL is set only the checksum at csum_start+csum_offset and any preceding checksums may be considered valid. If there are checksums in the packet after csum_offset it is possible they have not been verfied. This patch changes CHECKSUM_PARTIAL logic in skb_csum_unnecessary and __skb_gro_checksum_validate_needed to only considered checksums referring to csum_start and any preceding checksums (with starting offset before csum_start) to be verified. Signed-off-by:
-
Tom Herbert authored
Remote checksum offload processing is currently the same for both the GRO and non-GRO path. When the remote checksum offload option is encountered, the checksum field referred to is modified in the packet. So in the GRO case, the packet is modified in the GRO path and then the operation is skipped when the packet goes through the normal path based on skb->remcsum_offload. There is a problem in that the packet may be modified in the GRO path, but then forwarded off host still containing the remote checksum option. A remote host will again perform RCO but now the checksum verification will fail since GRO RCO already modified the checksum. To fix this, we ensure that GRO restores a packet to it's original state before returning. In this model, when GRO processes a remote checksum option it still changes the checksum per the algorithm but on return from lower layer processing the checksum is restored to its original value. In this patch we add define gro_remcsum structure which is passed to skb_gro_remcsum_process to save offset and delta for the checksum being changed. After lower layer processing, skb_gro_remcsum_cleanup is called to restore the checksum before returning from GRO. Signed-off-by:
-
Geert Uytterhoeven authored
net/openvswitch/flow_netlink.c: In function ‘validate_and_copy_set_tun’: net/openvswitch/flow_netlink.c:1749: warning: ‘err’ may be used uninitialized in this function If ipv4_tun_from_nlattr() returns a different positive value than OVS_TUNNEL_KEY_ATTR_GENEVE_OPTS, err will be uninitialized, and validate_and_copy_set_tun() may return an undefined value instead of a zero success indicator. Initialize err to zero to fix this. Fixes: 1dd144cf ("openvswitch: Support VXLAN Group Policy extension") Signed-off-by:
Thomas Graf <tgraf@suug.ch> Acked-by:
-
Pravin B Shelar authored
Userspace packet execute command pass down flow key for given packet. But userspace can skip some parameter with zero value. Therefore kernel needs to initialize key metadata to zero. Fixes: 07148121 ("openvswitch: Eliminate memset() from flow_extract.") Signed-off-by:
-
Joe Perches authored
Use the normal {} instead of a macro to terminate an array. Remove the macro too. Signed-off-by:Joe Perches <joe@perches.com> Signed-off-by:
-
Joe Perches authored
Use the normal {} instead of a macro to terminate an array. Remove the macro too. Signed-off-by: -
Sowmini Varadhan authored
When the RDS transport is TCP, we cannot inline the call to rds_send_xmit from rds_cong_queue_update because (a) we are already holding the sock_lock in the recv path, and will deadlock when tcp_setsockopt/tcp_sendmsg try to get the sock lock (b) cong_queue_update does an irqsave on the rds_cong_lock, and this will trigger warnings (for a good reason) from functions called out of sock_lock. This patch reverts the change introduced by 2fa57129 ("RDS: Bypass workqueue when queueing cong updates"). The patch has been verified for both RDS/TCP as well as RDS/RDMA to ensure that there are not regressions for either transport: - for verification of RDS/TCP a client-server unit-test was used, with the server blocked in gdb and thus unable to drain its rcvbuf, eventually triggering a RDS congestion update. - for RDS/RDMA, the standard IB regression tests were used Signed-off-by:Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by:
-
Vlad Yasevich authored
ip6_append_data is used by other protocols and some of them can't be partially checksummed. Only partially checksum UDP protocol. Fixes: 32dce968 (ipv6: Allow for partial checksums on non-ufo packets) Reported-by:
Sabrina Dubroca <sd@queasysnail.net> Tested-by:
Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains two small Netfilter updates for your net-next tree, they are: 1) Add ebtables support to nft_compat, from Arturo Borrero. 2) Fix missing validation of the SET_ID attribute in the lookup expressions, from Patrick McHardy. ==================== Signed-off-by: -
git://git.lwn.net/linux-2.6Linus Torvalds authored
Pull documentation updates from Jonathan Corbet: "Highlights this time around include: - A thrashing of SubmittingPatches to bring it out of the "send everything to Linus" era of kernel development. - A new document on completions from Nicholas McGuire - Lots of typo fixes, formatting improvements, corrections, build fixes, and more" * tag 'docs-for-linus' of git://git.lwn.net/linux-2.6: (35 commits) Documentation: Fix the wrong command `echo -1 > set_ftrace_pid` for cleaning the filter. can-doc: Fixed a wrong filepath in can.txt Documentation: Fix trivial typo in comment. kgdb,docs: Fix typo and minor style issues Documentation: add description for FTRACE probe status doc: brief user documentation for completion Documentation/misc-devices/mei: Fix indentation of embedded code. Documentation/misc-devices/mei: Fix indentation of enumeration. Documentation/misc-devices/mei: Fix spacing around parentheses. Documentation/misc-devices/mei: Fix formatting of headings. Documentation: devicetree: Fix double words in Doumentation/devicetree Documentation: mm: Fix typo in vm.txt lockstat: Add documentation on contention and contenting points Documentation: fix blackfin gptimers-example build errors Fixes column alignment in table of contents entry 1.9 in Documentation/filesystems/proc.txt CodingStyle: enable emacs display of trailing whitespace DocBook: Do not exceed argument list limit gpio: board.txt: Fix the gpio name example Documentation/SubmittingPatches: unify whitespace/tabs for the DCO MAINTAINERS: Add the docs-next git tree to the maintainer entry ... -
git://git.linaro.org/landing-teams/working/fujitsu/integrationLinus Torvalds authored
Pull mailbox framework updates from Jassi Brar. * 'mailbox-devel' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: Add Altera mailbox driver mailbox: check for bit set before polling Mailbox: Fix return value check in pcc_init()
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pincontrol updates from Linus Walleij: :This is the bulk of pin control changes for the v3.20 cycle: Framework changes and enhancements: - Passing -DDEBUG recursively to subdir drivers so we get debug messages properly turned on. - Infer map type from DT property in the groups parsing code in the generic pinconfig code. - Support for custom parameter passing in generic pin config. This is used when you are using the generic pin config, but want to add a few custom properties that no other driver will use. New drivers: - Driver for the Xilinx Zynq - Driver for the AmLogic Meson SoCs New features in drivers: - Sleep support (suspend/resume) for the Cherryview driver - mvebeu a38x can now mux a UART on pins MPP19 and MPP20 - Migrated the qualcomm driver to generic pin config handling of extended config options in the core code. - Support BUS1 and AUDIO in the Exynos pin controller. - Add some missing functions in the sun6i driver. - Add support for the A31S variant in the sun6i driver. - EMEv2 support in the Renesas PFC driver. - Add support for Qualcomm MSM8916 in the qcom driver. Deleted features - Drop support for the SiRF Marco that was never released to the market. - Drop SH7372 support as the support for this platform is removed from the kernel" * tag 'pinctrl-v3.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (40 commits) sh-pfc: emev2 - Fix mangled author name pinctrl: cherryview: Configure HiZ pins to be input when requested as GPIOs pinctrl: imx25: fix numbering for pins pinctrl: pinctrl-imx: don't use invalid value of conf_reg pinctrl: qcom: delete pin_config_get/set pinconf operations pinctrl: qcom: Add msm8916 pinctrl driver DT: pinctrl: Document Qualcomm MSM8916 pinctrl binding pinctrl: qcom: increase variable size for register offsets pinctrl: hide PCONFDUMP in #ifdef pinctrl: rockchip: Only mask interrupts; never disable pinctrl: zynq: Fix usb0 pins pinctrl: sh-pfc: sh7372: Remove DT binding documentation pinctrl: sh-pfc: sh7372: Remove PFC support sh-pfc: Add emev2 pinmux support sh-pfc: add macro to define pinmux without function pinctrl: add driver for Amlogic Meson SoCs staging: drivers: pinctrl: Fixed checkpatch.pl warnings pinctrl: exynos: Add AUDIO pin controller for exynos7 sh-pfc: r8a7790: add MLB+ pin group sh-pfc: r8a7791: add MLB+ pin group ... -
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds authored
Pull GPIO changes from Linus Walleij: "This is the GPIO bulk changes for the v3.20 series: GPIOLIB core changes: - Create and use of_mm_gpiochip_remove() for removing memory-mapped OF GPIO chips - GPIO MMIO library suppports bgpio_set_multiple for switching several lines at once, a feature merged in the last cycle. New drivers: - New driver for the APM X-gene standby GPIO controller - New driver for the Fujitsu MB86S7x GPIO controller Cleanups: - Moved rcar driver to use gpiolib irqchip - Moxart converted to the GPIO MMIO library - GE driver converted to GPIO MMIO library - Move sx150x to irqdomain - Move max732x to irqdomain - Move vx855 to use managed resources - Move dwapb to use managed resources - Clean tc3589x from platform data - Clean stmpe driver to use device tree only probe New subtypes: - sx1506 support in the sx150x driver - Quark 1000 SoC support in the SCH driver - Support X86 in the Xilinx driver - Support PXA1928 in the PXA driver Extended drivers: - max732x supports device tree probe - sx150x supports device tree probe Various minor cleanups and bug fixes" * tag 'gpio-v3.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (61 commits) gpio: kconfig: replace PPC_OF with PPC gpio: pxa: add PXA1928 gpio type support dt/bindings: gpio: add compatible string for marvell,pxa1928-gpio gpio: pxa: remove mach IRQ includes gpio: max732x: use an inline function for container cast gpio: use sizeof() instead of hardcoded values gpio: max732x: add set_multiple function gpio: sch: Consolidate similar algorithms gpio: tz1090-pdc: Use resource_size to fix off-by-one resource size calculation gpio: ge: Convert to use devm_kstrdup gpio: correctly use const char * const gpio: sx150x: fixup OF support gpio: mpc8xxx: Use of_mm_gpiochip_remove gpio: Add Fujitsu MB86S7x GPIO driver gpio: mpc8xxx: Convert to platform device interface. gpio: zevio: Use of_mm_gpiochip_remove gpio: gpio-mm-lantiq: Use of_mm_gpiochip_remove gpio: gpio-mm-lantiq: Use of_property_read_u32 gpio: gpio-mm-lantiq: Do not replicate code gpio :gpio-mm-lantiq: Use devm_kzalloc ...
-
