Skip to content

L
linux
Switch branch/tag
  1. 06 Aug, 2019 8 commits
    • Prarit Bhargava's avatar
      kernel/module.c: Only return -EEXIST for modules that have finished loading · 09ec6c67
      Prarit Bhargava authored 
      [ Upstream commit 6e6de3de ]

Microsoft HyperV disables the X86_FEATURE_SMCA bit on AMD systems, and
linux guests boot with repeated errors:

amd64_edac_mod: Unknown symbol amd_unregister_ecc_decoder (err -2)
amd64_edac_mod: Unknown symbol amd_register_ecc_decoder (err -2)
amd64_edac_mod: Unknown symbol amd_report_gart_errors (err -2)
amd64_edac_mod: Unknown symbol amd_unregister_ecc_decoder (err -2)
amd64_edac_mod: Unknown symbol amd_register_ecc_decoder (err -2)
amd64_edac_mod: Unknown symbol amd_report_gart_errors (err -2)

The warnings occur because the module code erroneously returns -EEXIST
for modules that have failed to load and are in the process of being
removed from the module list.

module amd64_edac_mod has a dependency on module edac_mce_amd.  Using
modules.dep, systemd will load edac_mce_amd for every request of
amd64_edac_mod.  When the edac_mce_amd module loads, the module has
state MODULE_STATE_UNFORMED and once the module load fails and the state
becomes MODULE_STATE_GOING.  Another request for edac_mce_amd module
executes and add_unformed_module() will erroneously return -EEXIST even
though the previous instance of edac_mce_amd has MODULE_STATE_GOING.
Upon receiving -EEXIST, systemd attempts to load amd64_edac_mod, which
fails because of unknown symbols from edac_mce_amd.

add_unformed_module() must wait to return for any case other than
MODULE_STATE_LIVE to prevent a race between multiple loads of
dependent modules.
Signed-off-by: default avatarPrarit Bhargava <prarit@redhat.com>
Signed-off-by: default avatarBarret Rhoden <brho@google.com>
Cc: David Arcari <darcari@redhat.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: default avatarJessica Yu <jeyu@kernel.org>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      09ec6c67
    • Helen Koike's avatar
      arm64: dts: rockchip: fix isp iommu clocks and power domain · fd53e45a
      Helen Koike authored 
      [ Upstream commit c432a29d ]

isp iommu requires wrapper variants of the clocks.
noc variants are always on and using the wrapper variants will activate
{A,H}CLK_ISP{0,1} due to the hierarchy.

Tested using the pending isp patch set (which is not upstream
yet). Without this patch, streaming from the isp stalls.

Also add the respective power domain and remove the "disabled" status.

Refer:
 RK3399 TRM v1.4 Fig. 2-4 RK3399 Clock Architecture Diagram
 RK3399 TRM v1.4 Fig. 8-1 RK3399 Power Domain Partition
Signed-off-by: default avatarHelen Koike <helen.koike@collabora.com>
Tested-by: default avatarManivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      fd53e45a
    • Dmitry Osipenko's avatar
      dmaengine: tegra-apb: Error out if DMA_PREP_INTERRUPT flag is unset · d8388cbd
      Dmitry Osipenko authored 
      [ Upstream commit dc161064 ]

Apparently driver was never tested with DMA_PREP_INTERRUPT flag being
unset since it completely disables interrupt handling instead of skipping
the callbacks invocations, hence putting channel into unusable state.

The flag is always set by all of kernel drivers that use APB DMA, so let's
error out in otherwise case for consistency. It won't be difficult to
support that case properly if ever will be needed.
Signed-off-by: default avatarDmitry Osipenko <digetx@gmail.com>
Acked-by: default avatarJon Hunter <jonathanh@nvidia.com>
Signed-off-by: default avatarVinod Koul <vkoul@kernel.org>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      d8388cbd
    • Cheng Jian's avatar
      ftrace: Enable trampoline when rec count returns back to one · f486088d
      Cheng Jian authored 
      [ Upstream commit a124692b ]

Custom trampolines can only be enabled if there is only a single ops
attached to it. If there's only a single callback registered to a function,
and the ops has a trampoline registered for it, then we can call the
trampoline directly. This is very useful for improving the performance of
ftrace and livepatch.

If more than one callback is registered to a function, the general
trampoline is used, and the custom trampoline is not restored back to the
direct call even if all the other callbacks were unregistered and we are
back to one callback for the function.

To fix this, set FTRACE_FL_TRAMP flag if rec count is decremented
to one, and the ops that left has a trampoline.

Testing After this patch :

insmod livepatch_unshare_files.ko
cat /sys/kernel/debug/tracing/enabled_functions

	unshare_files (1) R I	tramp: 0xffffffffc0000000(klp_ftrace_handler+0x0/0xa0) ->ftrace_ops_assist_func+0x0/0xf0

echo unshare_files > /sys/kernel/debug/tracing/set_ftrace_filter
echo function > /sys/kernel/debug/tracing/current_tracer
cat /sys/kernel/debug/tracing/enabled_functions

	unshare_files (2) R I ->ftrace_ops_list_func+0x0/0x150

echo nop > /sys/kernel/debug/tracing/current_tracer
cat /sys/kernel/debug/tracing/enabled_functions

	unshare_files (1) R I	tramp: 0xffffffffc0000000(klp_ftrace_handler+0x0/0xa0) ->ftrace_ops_assist_func+0x0/0xf0

Link: http://lkml.kernel.org/r/1556969979-111047-1-git-send-email-cj.chengjian@huawei.comSigned-off-by: default avatarCheng Jian <cj.chengjian@huawei.com>
Signed-off-by: default avatarSteven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      f486088d
    • Douglas Anderson's avatar
      ARM: dts: rockchip: Mark that the rk3288 timer might stop in suspend · ea26b427
      Douglas Anderson authored 
      [ Upstream commit 8ef1ba39 ]

This is similar to commit e6186820 ("arm64: dts: rockchip: Arch
counter doesn't tick in system suspend").  Specifically on the rk3288
it can be seen that the timer stops ticking in suspend if we end up
running through the "osc_disable" path in rk3288_slp_mode_set().  In
that path the 24 MHz clock will turn off and the timer stops.

To test this, I ran this on a Chrome OS filesystem:
  before=$(date); \
  suspend_stress_test -c1 --suspend_min=30 --suspend_max=31; \
  echo ${before}; date

...and I found that unless I plug in a device that requests USB wakeup
to be active that the two calls to "date" would show that fewer than
30 seconds passed.

NOTE: deep suspend (where the 24 MHz clock gets disabled) isn't
supported yet on upstream Linux so this was tested on a downstream
kernel.
Signed-off-by: default avatarDouglas Anderson <dianders@chromium.org>
Signed-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      ea26b427
    • Douglas Anderson's avatar
      ARM: dts: rockchip: Make rk3288-veyron-mickey's emmc work again · 22befe67
      Douglas Anderson authored 
      [ Upstream commit 99fa0667 ]

When I try to boot rk3288-veyron-mickey I totally fail to make the
eMMC work.  Specifically my logs (on Chrome OS 4.19):

  mmc_host mmc1: card is non-removable.
  mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0)
  mmc1: switch to bus width 8 failed
  mmc1: switch to bus width 4 failed
  mmc1: new high speed MMC card at address 0001
  mmcblk1: mmc1:0001 HAG2e 14.7 GiB
  mmcblk1boot0: mmc1:0001 HAG2e partition 1 4.00 MiB
  mmcblk1boot1: mmc1:0001 HAG2e partition 2 4.00 MiB
  mmcblk1rpmb: mmc1:0001 HAG2e partition 3 4.00 MiB, chardev (243:0)
  mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0)
  mmc1: switch to bus width 8 failed
  mmc1: switch to bus width 4 failed
  mmc1: tried to HW reset card, got error -110
  mmcblk1: error -110 requesting status
  mmcblk1: recovery failed!
  print_req_error: I/O error, dev mmcblk1, sector 0
  ...

When I remove the '/delete-property/mmc-hs200-1_8v' then everything is
hunky dory.

That line comes from the original submission of the mickey dts
upstream, so presumably at the time the HS200 was failing and just
enumerating things as a high speed device was fine.  ...or maybe it's
just that some mickey devices work when enumerating at "high speed",
just not mine?

In any case, hs200 seems good now.  Let's turn it on.
Signed-off-by: default avatarDouglas Anderson <dianders@chromium.org>
Signed-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      22befe67
    • Douglas Anderson's avatar
      ARM: dts: rockchip: Make rk3288-veyron-minnie run at hs200 · 8c5a33d3
      Douglas Anderson authored 
      [ Upstream commit 1c047902 ]

As some point hs200 was failing on rk3288-veyron-minnie.  See commit
98492678 ("ARM: dts: rockchip: temporarily remove emmc hs200 speed
from rk3288 minnie").  Although I didn't track down exactly when it
started working, it seems to work OK now, so let's turn it back on.

To test this, I booted from SD card and then used this script to
stress the enumeration process after fixing a memory leak [1]:
  cd /sys/bus/platform/drivers/dwmmc_rockchip
  for i in $(seq 1 3000); do
    echo "========================" $i
    echo ff0f0000.dwmmc > unbind
    sleep .5
    echo ff0f0000.dwmmc > bind
    while true; do
      if [ -e /dev/mmcblk2 ]; then
        break;
      fi
      sleep .1
    done
  done

It worked fine.

[1] https://lkml.kernel.org/r/20190503233526.226272-1-dianders@chromium.orgSigned-off-by: default avatarDouglas Anderson <dianders@chromium.org>
Signed-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      8c5a33d3
    • Russell King's avatar
      ARM: riscpc: fix DMA · 3c1d1bad
      Russell King authored 
      [ Upstream commit ffd9a1ba ]

DMA got broken a while back in two different ways:
1) a change in the behaviour of disable_irq() to wait for the interrupt
   to finish executing causes us to deadlock at the end of DMA.
2) a change to avoid modifying the scatterlist left the first transfer
   uninitialised.

DMA is only used with expansion cards, so has gone unnoticed.

Fixes: fa4e9989 ("[ARM] dma: RiscPC: don't modify DMA SG entries")
Signed-off-by: default avatarRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      3c1d1bad
  3. 04 Aug, 2019 32 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7