- 26 Mar, 2015 40 commits
-
-
Patrick McHardy authored
commit 8670c3a5 upstream. A race condition exists in the rule transaction code for rules that get added and removed within the same transaction. The new rule starts out as inactive in the current and active in the next generation and is inserted into the ruleset. When it is deleted, it is additionally set to inactive in the next generation as well. On commit the next generation is begun, then the actions are finalized. For the new rule this would mean clearing out the inactive bit for the previously current, now next generation. However nft_rule_clear() clears out the bits for *both* generations, activating the rule in the current generation, where it should be deactivated due to being deleted. The rule will thus be active until the deletion is finalized, removing the rule from the ruleset. Similarly, when aborting a transaction for the same case, the undo of insertion will remove it from the RCU protected rule list, the deletion will clear out all bits. However until the next RCU synchronization after all operations have been undone, the rule is active on CPUs which can still see the rule on the list. Generally, there may never be any modifications of the current generations' inactive bit since this defeats the entire purpose of atomicity. Change nft_rule_clear() to only touch the next generations bit to fix this. Signed-off-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Dumazet authored
commit 78296c97 upstream. As soon as extract_icmp6_fields() returns, its local storage (automatic variables) is deallocated and can be overwritten. Lets add an additional parameter to make sure storage is valid long enough. While we are at it, adds some const qualifiers. Signed-off-by:
Eric Dumazet <edumazet@google.com> Fixes: b64c9256 ("tproxy: added IPv6 support to the socket match") Signed-off-by:
-
Pablo Neira Ayuso authored
commit 520aa741 upstream. Feb 12 18:20:42 nfdev kernel: ------------[ cut here ]------------ Feb 12 18:20:42 nfdev kernel: WARNING: CPU: 4 PID: 4359 at kernel/module.c:963 module_put+0x9b/0xba() Feb 12 18:20:42 nfdev kernel: CPU: 4 PID: 4359 Comm: ebtables-compat Tainted: G W 3.19.0-rc6+ #43 [...] Feb 12 18:20:42 nfdev kernel: Call Trace: Feb 12 18:20:42 nfdev kernel: [<ffffffff815fd911>] dump_stack+0x4c/0x65 Feb 12 18:20:42 nfdev kernel: [<ffffffff8103e6f7>] warn_slowpath_common+0x9c/0xb6 Feb 12 18:20:42 nfdev kernel: [<ffffffff8109919f>] ? module_put+0x9b/0xba Feb 12 18:20:42 nfdev kernel: [<ffffffff8103e726>] warn_slowpath_null+0x15/0x17 Feb 12 18:20:42 nfdev kernel: [<ffffffff8109919f>] module_put+0x9b/0xba Feb 12 18:20:42 nfdev kernel: [<ffffffff813ecf7c>] nft_match_destroy+0x45/0x4c Feb 12 18:20:42 nfdev kernel: [<ffffffff813e683f>] nf_tables_rule_destroy+0x28/0x70 Reported-by:
Arturo Borrero Gonzalez <arturo.borrero.glez@gmail.com> Signed-off-by:
-
Alexey Andriyanov authored
commit dd3733b3 upstream. The current code prevents any operation with a mixed-family dest unless IP_VS_CONN_F_TUNNEL flag is set. The problem is that it's impossible for the client to follow this rule, because ip_vs_genl_parse_dest does not even read the destination conn_flags when cmd = IPVS_CMD_DEL_DEST (need_full_dest = 0). Also, not every client can pass this flag when removing a dest. ipvsadm, for example, does not support the "-i" command line option together with the "-d" option. This change disables any checks for mixed-family on IPVS_CMD_DEL_DEST command. Signed-off-by:
Alexey Andriyanov <alan@al-an.info> Fixes: bc18d37f ("ipvs: Allow heterogeneous pools now that we support them") Acked-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
-
Julian Anastasov authored
commit 528c943f upstream. ip_vs_conn_fill_param_sync() gets in param.pe a module reference for persistence engine from __ip_vs_pe_getbyname() but forgets to put it. Problem occurs in backup for sync protocol v1 (2.6.39). Also, pe_data usually comes in sync messages for connection templates and ip_vs_conn_new() copies the pointer only in this case. Make sure pe_data is not leaked if it comes unexpectedly for normal connections. Leak can happen only if bogus messages are sent to backup server. Fixes: fe5e7a1e ("IPVS: Backup, Adding Version 1 receive capability") Signed-off-by:
-
Nishanth Aravamudan authored
commit 4ad04e59 upstream. After d905c5df ("PPC: POWERNV: move iommu_add_device earlier"), the refcnt on the kobject backing the IOMMU group for a PCI device is elevated by each call to pci_dma_dev_setup_pSeriesLP() (via set_iommu_table_base_and_group). When we go to dlpar a multi-function PCI device out: iommu_reconfig_notifier -> iommu_free_table -> iommu_group_put BUG_ON(tbl->it_group) We trip this BUG_ON, because there are still references on the table, so it is not freed. Fix this by moving the powernv bus notifier to common code and calling it for both powernv and pseries. Fixes: d905c5df ("PPC: POWERNV: move iommu_add_device earlier") Signed-off-by:
Nishanth Aravamudan <nacc@linux.vnet.ibm.com> Tested-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Michael Ellerman authored
commit 875ebe94 upstream. Anton has a busy ppc64le KVM box where guests sometimes hit the infamous "kernel BUG at kernel/smpboot.c:134!" issue during boot: BUG_ON(td->cpu != smp_processor_id()); Basically a per CPU hotplug thread scheduled on the wrong CPU. The oops output confirms it: CPU: 0 Comm: watchdog/130 The problem is that we aren't ensuring the CPU active bit is set for the secondary before allowing the master to continue on. The master unparks the secondary CPU's kthreads and the scheduler looks for a CPU to run on. It calls select_task_rq() and realises the suggested CPU is not in the cpus_allowed mask. It then ends up in select_fallback_rq(), and since the active bit isnt't set we choose some other CPU to run on. This seems to have been introduced by 6acbfb96 "sched: Fix hotplug vs. set_cpus_allowed_ptr()", which changed from setting active before online to setting active after online. However that was in turn fixing a bug where other code assumed an active CPU was also online, so we can't just revert that fix. The simplest fix is just to spin waiting for both active & online to be set. We already have a barrier prior to set_cpu_online() (which also sets active), to ensure all other setup is completed before online & active are set. Fixes: 6acbfb96 ("sched: Fix hotplug vs. set_cpus_allowed_ptr()") Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Daniel J Blueman authored
commit c8a470ca upstream. On NumaChip systems, the physical processor ID assignment wasn't accounting for the number of nodes in AMD multi-module processors, giving an incorrect sibling map: $ cd /sys/devices/system/cpu/cpu29/topology $ grep . * core_id:5 core_siblings:00000000,ff000000 core_siblings_list:24-31 physical_package_id:3 thread_siblings:00000000,30000000 thread_siblings_list:28-29 This fixes it: $ cd /sys/devices/system/cpu/cpu29/topology $ grep . * core_id:5 core_siblings:00000000,ffff0000 core_siblings_list:16-31 physical_package_id:1 thread_siblings:00000000,30000000 thread_siblings_list:28-29 Signed-off-by:
Daniel J Blueman <daniel@numascale.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Steffen Persvold <sp@numascale.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1426135950-10110-1-git-send-email-daniel@numascale.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Andy Lutomirski authored
commit 394838c9 upstream. The one in do_debug() is probably harmless, but better safe than sorry. Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/d67deaa9df5458363623001f252d1aee3215d014.1425948056.git.luto@amacapital.netSigned-off-by:
-
Jiri Slaby authored
commit e8932869 upstream. On gcc5 the kernel does not link: ld: .eh_frame_hdr table[4] FDE at 0000000000000648 overlaps table[5] FDE at 0000000000000670. Because prior GCC versions always emitted NOPs on ALIGN directives, but gcc5 started omitting them. .LSTARTFDEDLSI1 says: /* HACK: The dwarf2 unwind routines will subtract 1 from the return address to get an address in the middle of the presumed call instruction. Since we didn't get here via a call, we need to include the nop before the real start to make up for it. */ .long .LSTART_sigreturn-1-. /* PC-relative start address */ But commit 69d0627a ("x86 vDSO: reorder vdso32 code") from 2.6.25 replaced .org __kernel_vsyscall+32,0x90 by ALIGN right before __kernel_sigreturn. Of course, ALIGN need not generate any NOP in there. Esp. gcc5 collapses vclock_gettime.o and int80.o together with no generated NOPs as "ALIGN". So fix this by adding to that point at least a single NOP and make the function ALIGN possibly with more NOPs then. Kudos for reporting and diagnosing should go to Richard. Reported-by:
Richard Biener <rguenther@suse.de> Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Acked-by:
-
Paolo Bonzini authored
commit dc9be0fa upstream. POWER supports irqfds but forgot to advertise them. Some userspace does not check for the capability, but others check it---thus they work on x86 and s390 but not POWER. To avoid that other architectures in the future make the same mistake, let common code handle KVM_CAP_IRQFD the same way as KVM_CAP_IRQFD_RESAMPLE. Reported-and-tested-by:
Greg Kurz <gkurz@linux.vnet.ibm.com> Fixes: 297e2105Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by:
-
Oleg Nesterov authored
commit f4c36863 upstream. drop_fpu() does clear_used_math() and usually this is correct because tsk == current. However switch_fpu_finish()->restore_fpu_checking() is called before __switch_to() updates the "current_task" variable. If it fails, we will wrongly clear the PF_USED_MATH flag of the previous task. So use clear_stopped_child_used_math() instead. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Rik van Riel <riel@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Pekka Riikonen <priikone@iki.fi> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Suresh Siddha <sbsiddha@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20150309171041.GB11388@redhat.comSigned-off-by:
-
Oleg Nesterov authored
commit a7c80ebc upstream. math_state_restore() assumes it is called with irqs disabled, but this is not true if the caller is __restore_xstate_sig(). This means that if ia32_fxstate == T and __copy_from_user() fails, __restore_xstate_sig() returns with irqs disabled too. This triggers: BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:41 dump_stack ___might_sleep ? _raw_spin_unlock_irqrestore __might_sleep down_read ? _raw_spin_unlock_irqrestore print_vma_addr signal_fault sys32_rt_sigreturn Change __restore_xstate_sig() to call set_used_math() unconditionally. This avoids enabling and disabling interrupts in math_state_restore(). If copy_from_user() fails, we can simply do fpu_finit() by hand. [ Note: this is only the first step. math_state_restore() should not check used_math(), it should set this flag. While init_fpu() should simply die. ] Signed-off-by:
-
Stephan Mueller authored
commit ccfe8c3f upstream. The kernel crypto API logic requires the caller to provide the length of (ciphertext || authentication tag) as cryptlen for the AEAD decryption operation. Thus, the cipher implementation must calculate the size of the plaintext output itself and cannot simply use cryptlen. The RFC4106 GCM decryption operation tries to overwrite cryptlen memory in req->dst. As the destination buffer for decryption only needs to hold the plaintext memory but cryptlen references the input buffer holding (ciphertext || authentication tag), the assumption of the destination buffer length in RFC4106 GCM operation leads to a too large size. This patch simply uses the already calculated plaintext size. In addition, this patch fixes the offset calculation of the AAD buffer pointer: as mentioned before, cryptlen already includes the size of the tag. Thus, the tag does not need to be added. With the addition, the AAD will be written beyond the already allocated buffer. Note, this fixes a kernel crash that can be triggered from user space via AF_ALG(aead) -- simply use the libkcapi test application from [1] and update it to use rfc4106-gcm-aes. Using [1], the changes were tested using CAVS vectors to demonstrate that the crypto operation still delivers the right results. [1] http://www.chronox.de/libkcapi.html CC: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by:
Stephan Mueller <smueller@chronox.de> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Ard Biesheuvel authored
commit 001eabfd upstream. This updates the bit sliced AES module to the latest version in the upstream OpenSSL repository (e620e5ae37bc). This is needed to fix a bug in the XTS decryption path, where data chunked in a certain way could trigger the ciphertext stealing code, which is not supposed to be active in the kernel build (The kernel implementation of XTS only supports round multiples of the AES block size of 16 bytes, whereas the conformant OpenSSL implementation of XTS supports inputs of arbitrary size by applying ciphertext stealing). This is fixed in the upstream version by adding the missing #ifndef XTS_CHAIN_TWEAK around the offending instructions. The upstream code also contains the change applied by Russell to build the code unconditionally, i.e., even if __LINUX_ARM_ARCH__ < 7, but implemented slightly differently. Fixes: e4e7f10b ("ARM: add support for bit sliced AES using NEON instructions") Reported-by:
Adrian Kotelba <adrian.kotelba@gmail.com> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by:
Milan Broz <gmazyland@gmail.com> Signed-off-by:
-
Kirill A. Shutemov authored
commit ab676b7d upstream. As pointed by recent post[1] on exploiting DRAM physical imperfection, /proc/PID/pagemap exposes sensitive information which can be used to do attacks. This disallows anybody without CAP_SYS_ADMIN to read the pagemap. [1] http://googleprojectzero.blogspot.com/2015/03/exploiting-dram-rowhammer-bug-to-gain.html [ Eventually we might want to do anything more finegrained, but for now this is the simple model. - Linus ] Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by:
Konstantin Khlebnikov <khlebnikov@openvz.org> Acked-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Maxime Ripard authored
commit 5724be84 upstream. On the Cortex-A9-based Armada SoCs, the MPIC is not the primary interrupt controller. Yet, it still has to handle some per-cpu interrupt. To do so, it is chained with the GIC using a per-cpu interrupt. However, the current code only call irq_set_chained_handler, which is called and enable that interrupt only on the boot CPU, which means that the parent per-CPU interrupt is never unmasked on the secondary CPUs, preventing the per-CPU interrupt to actually work as expected. This was not seen until now since the only MPIC PPI users were the Marvell timers that were not working, but not used either since the system use the ARM TWD by default, and the ethernet controllers, that are faking there interrupts as SPI, and don't really expect to have interrupts on the secondary cores anyway. Add a CPU notifier that will enable the PPI on the secondary cores when they are brought up. Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Link: https://lkml.kernel.org/r/1425378443-28822-1-git-send-email-maxime.ripard@free-electrons.comSigned-off-by:
Jason Cooper <jason@lakedaemon.net> Signed-off-by:
-
Sasha Levin authored
commit 4efe874a upstream. When printing the driver_override parameter when it is 4095 and 4094 bytes long, the printing code would access invalid memory because we need count+1 bytes for printing. Fixes: 782a985d ("PCI: Introduce new device binding path using pci_dev.driver_override") Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
Alex Williamson <alex.williamson@redhat.com> CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> CC: Alexander Graf <agraf@suse.de> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
James Bottomley authored
commit 6302ce4d upstream. This crash was reported: [ 366.947370] sd 3:0:1:0: [sdb] Spinning up disk.... [ 368.804046] BUG: unable to handle kernel NULL pointer dereference at (null) [ 368.804072] IP: [<ffffffff81358457>] __mutex_lock_common.isra.7+0x9c/0x15b [ 368.804098] PGD 0 [ 368.804114] Oops: 0002 [#1] SMP [ 368.804143] CPU 1 [ 368.804151] Modules linked in: sg netconsole s3g(PO) uinput joydev hid_multitouch usbhid hid snd_hda_codec_via cpufreq_userspace cpufreq_powersave cpufreq_stats uhci_hcd cpufreq_conservative snd_hda_intel snd_hda_codec snd_hwdep snd_pcm sdhci_pci snd_page_alloc sdhci snd_timer snd psmouse evdev serio_raw pcspkr soundcore xhci_hcd shpchp s3g_drm(O) mvsas mmc_core ahci libahci drm i2c_core acpi_cpufreq mperf video processor button thermal_sys dm_dmirror exfat_fs exfat_core dm_zcache dm_mod padlock_aes aes_generic padlock_sha iscsi_target_mod target_core_mod configfs sswipe libsas libata scsi_transport_sas picdev via_cputemp hwmon_vid fuse parport_pc ppdev lp parport autofs4 ext4 crc16 mbcache jbd2 sd_mod crc_t10dif usb_storage scsi_mod ehci_hcd usbcore usb_common [ 368.804749] [ 368.804764] Pid: 392, comm: kworker/u:3 Tainted: P W O 3.4.87-logicube-ng.22 #1 To be filled by O.E.M. To be filled by O.E.M./EPIA-M920 [ 368.804802] RIP: 0010:[<ffffffff81358457>] [<ffffffff81358457>] __mutex_lock_common.isra.7+0x9c/0x15b [ 368.804827] RSP: 0018:ffff880117001cc0 EFLAGS: 00010246 [ 368.804842] RAX: 0000000000000000 RBX: ffff8801185030d0 RCX: ffff88008edcb420 [ 368.804857] RDX: 0000000000000000 RSI: 0000000000000002 RDI: ffff8801185030d4 [ 368.804873] RBP: ffff8801181531c0 R08: 0000000000000020 R09: 00000000fffffffe [ 368.804885] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801185030d4 [ 368.804899] R13: 0000000000000002 R14: ffff880117001fd8 R15: ffff8801185030d8 [ 368.804916] FS: 0000000000000000(0000) GS:ffff88011fc80000(0000) knlGS:0000000000000000 [ 368.804931] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 368.804946] CR2: 0000000000000000 CR3: 000000000160b000 CR4: 00000000000006e0 [ 368.804962] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 368.804978] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 368.804995] Process kworker/u:3 (pid: 392, threadinfo ffff880117000000, task ffff8801181531c0) [ 368.805009] Stack: [ 368.805017] ffff8801185030d8 0000000000000000 ffffffff8161ddf0 ffffffff81056f7c [ 368.805062] 000000000000b503 ffff8801185030d0 ffff880118503000 0000000000000000 [ 368.805100] ffff8801185030d0 ffff8801188b8000 ffff88008edcb420 ffffffff813583ac [ 368.805135] Call Trace: [ 368.805153] [<ffffffff81056f7c>] ? up+0xb/0x33 [ 368.805168] [<ffffffff813583ac>] ? mutex_lock+0x16/0x25 [ 368.805194] [<ffffffffa018c414>] ? smp_execute_task+0x4e/0x222 [libsas] [ 368.805217] [<ffffffffa018ce1c>] ? sas_find_bcast_dev+0x3c/0x15d [libsas] [ 368.805240] [<ffffffffa018ce4f>] ? sas_find_bcast_dev+0x6f/0x15d [libsas] [ 368.805264] [<ffffffffa018e989>] ? sas_ex_revalidate_domain+0x37/0x2ec [libsas] [ 368.805280] [<ffffffff81355a2a>] ? printk+0x43/0x48 [ 368.805296] [<ffffffff81359a65>] ? _raw_spin_unlock_irqrestore+0xc/0xd [ 368.805318] [<ffffffffa018b767>] ? sas_revalidate_domain+0x85/0xb6 [libsas] [ 368.805336] [<ffffffff8104e5d9>] ? process_one_work+0x151/0x27c [ 368.805351] [<ffffffff8104f6cd>] ? worker_thread+0xbb/0x152 [ 368.805366] [<ffffffff8104f612>] ? manage_workers.isra.29+0x163/0x163 [ 368.805382] [<ffffffff81052c4e>] ? kthread+0x79/0x81 [ 368.805399] [<ffffffff8135fea4>] ? kernel_thread_helper+0x4/0x10 [ 368.805416] [<ffffffff81052bd5>] ? kthread_flush_work_fn+0x9/0x9 [ 368.805431] [<ffffffff8135fea0>] ? gs_change+0x13/0x13 [ 368.805442] Code: 83 7d 30 63 7e 04 f3 90 eb ab 4c 8d 63 04 4c 8d 7b 08 4c 89 e7 e8 fa 15 00 00 48 8b 43 10 4c 89 3c 24 48 89 63 10 48 89 44 24 08 <48> 89 20 83 c8 ff 48 89 6c 24 10 87 03 ff c8 74 35 4d 89 ee 41 [ 368.805851] RIP [<ffffffff81358457>] __mutex_lock_common.isra.7+0x9c/0x15b [ 368.805877] RSP <ffff880117001cc0> [ 368.805886] CR2: 0000000000000000 [ 368.805899] ---[ end trace b720682065d8f4cc ]--- It's directly caused by 89d3cf6a [SCSI] libsas: add mutex for SMP task execution, but shows a deeper cause: expander functions expect to be able to cast to and treat domain devices as expanders. The correct fix is to only do expander discover when we know we've got an expander device to avoid wrongly casting a non-expander device. Reported-by:
Praveen Murali <pmurali@logicube.com> Tested-by:
James Bottomley <JBottomley@Parallels.com> Signed-off-by:
-
Al Viro authored
commit f01d35a1 upstream. AIO_PREAD requests call ->aio_read() with iovec on caller's stack, so if we are going to access it asynchronously, we'd better get ourselves a copy - the one on kernel stack of aio_run_iocb() won't be there anymore. function/f_fs.c take care of doing that, legacy/inode.c doesn't... Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Brian Norris authored
commit 721a09e9 upstream. Commit 106937e8 ("of: fix handling of '/' in options for of_find_node_by_path()") caused a regression in OF handling of stdout-path. While it fixes some cases which have '/' after the ':', it breaks cases where there is more than one '/' *before* the ':'. For example, it breaks this boot string stdout-path = "/rdb/serial@f040ab00:115200"; So rather than doing sequentialized checks (first for '/', then for ':'; or vice versa), to get the correct behavior we need to check for the first occurrence of either one of them. It so happens that the handy strcspn() helper can do just that. Fixes: 106937e8 ("of: fix handling of '/' in options for of_find_node_by_path()") Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Acked-by:
Leif Lindholm <leif.lindholm@linaro.org> Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Leif Lindholm authored
commit 106937e8 upstream. Ensure proper handling of paths with appended options (after ':'), where those options may contain a '/'. Fixes: 7914a7c5 ("of: support passing console options with stdout-path") Reported-by:
Peter Hurley <peter@hurleysoftware.com> Signed-off-by:
-
Jan Beulich authored
commit af6fc858 upstream. Otherwise the guest can abuse that control to cause e.g. PCIe Unsupported Request responses by disabling memory and/or I/O decoding and subsequently causing (CPU side) accesses to the respective address ranges, which (depending on system configuration) may be fatal to the host. Note that to alter any of the bits collected together as PCI_COMMAND_GUEST permissive mode is now required to be enabled globally or on the specific device. This is CVE-2015-2150 / XSA-120. Signed-off-by:
Jan Beulich <jbeulich@suse.com> Reviewed-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
Juergen Gross authored
commit b8f05c88 upstream. Commit 054954eb ("xen: switch to linear virtual mapped sparse p2m list") introduced an error. During initialization of the p2m list a p2m identity area mapped by a complete identity pmd entry has to be split up into smaller chunks sometimes, if a non-identity pfn is introduced in this area. If this non-identity pfn is not at index 0 of a p2m page the new p2m page needed is initialized with wrong identity entries, as the identity pfns don't start with the value corresponding to index 0, but with the initial non-identity pfn. This results in weird wrong mappings. Correct the wrong initialization by starting with the correct pfn. Reported-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
Juergen Gross <jgross@suse.com> Tested-by:
-
Juergen Gross authored
commit 85e40b05 upstream. Using the pvops kernel a NULL pointer dereference was detected on a large machine (144 processors) when booting as dom0 in evtchn_fifo_unmask() during assignment of a pirq. The event channel in question was the first to need a new entry in event_array[] in events_fifo.c. Unfortunately xen_irq_info_pirq_setup() is called with evtchn being 0 for a new pirq and the real event channel number is assigned to the pirq only during __startup_pirq(). It is mandatory to call xen_evtchn_port_setup() after assigning the event channel number to the pirq to make sure all memory needed for the event channel is allocated. Signed-off-by:
-
Javier Martinez Canillas authored
commit 8792f777 upstream. Commit df9e26d0 ("rtc: s3c: add support for RTC of Exynos3250 SoC") added an "rtc_src" DT property to specify the clock used as a source to the S3C real-time clock. Not all SoCs needs this so commit eaf3a659 ("drivers/rtc/rtc-s3c.c: fix initialization failure without rtc source clock") changed to check the struct s3c_rtc_data .needs_src_clk to conditionally grab the clock. But that commit didn't update the data for each IP version so the RTC broke on the boards that needs a source clock. This is the case of at least Exynos5250 and Exynos5440 which uses the s3c6410 RTC IP block. This commit fixes the S3C rtc on the Exynos5250 Snow and Exynos5420 Peach Pit and Pi Chromebooks. Signed-off-by:
Javier Martinez Canillas <javier.martinez@collabora.co.uk> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Chanwoo Choi <cw00.choi@samsung.com> Cc: Doug Anderson <dianders@chromium.org> Cc: Olof Johansson <olof@lixom.net> Cc: Kevin Hilman <khilman@linaro.org> Cc: Tyler Baker <tyler.baker@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Imre Deak authored
commit ab3be73f upstream. Bjørn reported that his machine hang during hibernation and eventually bisected the problem to the following commit: commit da2bc1b9 Author: Imre Deak <imre.deak@intel.com> Date: Thu Oct 23 19:23:26 2014 +0300 drm/i915: add poweroff_late handler The problem seems to be that after the kernel puts the device into D3 the BIOS still tries to access it, or otherwise assumes that it's in D0. This is clearly bogus, since ACPI mandates that devices are put into D3 by the OSPM if they are not wake-up sources. In the future we want to unify more of the driver's runtime and system suspend paths, for example by skipping all the system suspend/hibernation hooks if the device is runtime suspended already. Accordingly for all other platforms the goal is still to properly power down the device during hibernation. v2: - Another GEN4 Lenovo laptop had the same issue, while platforms from other vendors (including mobile and desktop, GEN4 and non-GEN4) seem to work fine. Based on this apply the workaround on all GEN4 Lenovo platforms. - add code comment about failing platforms (Ville) Reference: http://lists.freedesktop.org/archives/intel-gfx/2015-February/060633.htmlReported-and-bisected-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
Imre Deak <imre.deak@intel.com> Acked-by:
Daniel Vetter <daniel.vetter@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Imre Deak authored
commit 888d0d42 upstream. This will be needed by later patches, so factor it out. No functional change. v2: - s/dev_to_i915_priv/dev_to_i915/ (Jani) - don't use the helper in i915_pm_suspend (Chris) - simplify the helper (Chris) v3: - remove redundant upcasting in the helper (Daniel) Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Chris Wilson authored
commit 9a6f5130 upstream. The internal framebuffers we create to remap legacy cursor ioctls to plane operations for the universal plane support shouldn't be linke to the file like normal userspace framebuffers. This bug goes back to the original universal cursor plane support introduced in commit 161d0dc1 Author: Matt Roper <matthew.d.roper@intel.com> Date: Tue Jun 10 08:28:10 2014 -0700 drm: Support legacy cursor ioctls via universal planes when possible (v4) The isn't too disastrous since fbs are small, we only create one when the cursor bo gets changed and ultimately they'll be reaped when the window server restarts. Conceptually we'd want to just pass NULL for file_priv when creating it, but the driver needs the file to lookup the underlying buffer object for cursor id. Instead let's move the file_priv linking out of add_framebuffer_internal() into the addfb ioctl implementation, which is the only place it is needed. And also rename the function for a more accurate since it only creates the fb, but doesn't add it anywhere. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> (fix & commit msg) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (provider of lipstick) Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Rob Clark <robdclark@gmail.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Thomas Hellstrom authored
commit 5151adb3 upstream. Experimental lockdep annotation added to the TTM lock has unveiled a couple of lock dependency violations in the vmwgfx driver. In both cases it turns out that the device_private::reservation_sem is not needed so the offending code is moved out of that lock. Acked-by:
Sinclair Yeh <syeh@vmware.com> Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
-
Thomas Hellstrom authored
commit 3458390b upstream. To take down the MOB and GMR memory types, the driver may have to issue fence objects and thus make sure that the fence manager is taken down after those memory types. Reorder device init accordingly. Signed-off-by:
-
Jakub Kicinski authored
commit a4944572 upstream. This reverts commit e4df3a0b ("i2c: core: Dispose OF IRQ mapping at client removal time") Calling irq_dispose_mapping() will destroy the mapping and disassociate the IRQ from the IRQ chip to which it belongs. Keeping it is OK, because existent mappings are reused properly. Also, this commit breaks drivers using devm* for IRQ management on OF-based systems because devm* cleanup happens in device code, after bus's remove() method returns. Signed-off-by:
Jakub Kicinski <kubakici@wp.pl> Reported-by:
Sébastien Szymanski <sebastien.szymanski@armadeus.com> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> [wsa: updated the commit message with findings fromt the other bug report] Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Fixes: e4df3a0bSigned-off-by:
-
Danesh Petigara authored
commit 850fc430 upstream. The CMA aligned offset calculation is incorrect for non-zero order_per_bit values. For example, if cma->order_per_bit=1, cma->base_pfn= 0x2f800000 and align_order=12, the function returns a value of 0x17c00 instead of 0x400. This patch fixes the CMA aligned offset calculation. The previous calculation was wrong and would return too-large values for the offset, so that when cma_alloc looks for free pages in the bitmap with the requested alignment > order_per_bit, it starts too far into the bitmap and so CMA allocations will fail despite there actually being plenty of free pages remaining. It will also probably have the wrong alignment. With this change, we will get the correct offset into the bitmap. One affected user is powerpc KVM, which has kvm_cma->order_per_bit set to KVM_CMA_CHUNK_ORDER - PAGE_SHIFT, or 18 - 12 = 6. [gregory.0xf0@gmail.com: changelog additions] Signed-off-by:
Danesh Petigara <dpetigara@broadcom.com> Reviewed-by:
Gregory Fong <gregory.0xf0@gmail.com> Acked-by:
Michal Nazarewicz <mina86@mina86.com> Signed-off-by:
-
Ryusuke Konishi authored
commit 283ee148 upstream. According to a report from Yuxuan Shui, nilfs2 in kernel 3.19 got stuck during recovery at mount time. The code path that caused the deadlock was as follows: nilfs_fill_super() load_nilfs() nilfs_salvage_orphan_logs() * Do roll-forwarding, attach segment constructor for recovery, and kick it. nilfs_segctor_thread() nilfs_segctor_thread_construct() * A lock is held with nilfs_transaction_lock() nilfs_segctor_do_construct() nilfs_segctor_drop_written_files() iput() iput_final() write_inode_now() writeback_single_inode() __writeback_single_inode() do_writepages() nilfs_writepage() nilfs_construct_dsync_segment() nilfs_transaction_lock() --> deadlock This can happen if commit 7ef3ff2f ("nilfs2: fix deadlock of segment constructor over I_SYNC flag") is applied and roll-forward recovery was performed at mount time. The roll-forward recovery can happen if datasync write is done and the file system crashes immediately after that. For instance, we can reproduce the issue with the following steps: < nilfs2 is mounted on /nilfs (device: /dev/sdb1) > # dd if=/dev/zero of=/nilfs/test bs=4k count=1 && sync # dd if=/dev/zero of=/nilfs/test conv=notrunc oflag=dsync bs=4k count=1 && reboot -nfh < the system will immediately reboot > # mount -t nilfs2 /dev/sdb1 /nilfs The deadlock occurs because iput() can run segment constructor through writeback_single_inode() if MS_ACTIVE flag is not set on sb->s_flags. The above commit changed segment constructor so that it calls iput() asynchronously for inodes with i_nlink == 0, but that change was imperfect. This fixes the another deadlock by deferring iput() in segment constructor even for the case that mount is not finished, that is, for the case that MS_ACTIVE flag is not set. Signed-off-by:
Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Reported-by:
Yuxuan Shui <yshuiv7@gmail.com> Tested-by:
-
Doug Anderson authored
commit 29d62ec5 upstream. Normally _regulator_do_enable() isn't called on an already-enabled rdev. That's because the main caller, _regulator_enable() always calls _regulator_is_enabled() and only calls _regulator_do_enable() if the rdev was not already enabled. However, there is one caller of _regulator_do_enable() that doesn't check: regulator_suspend_finish(). While we might want to make regulator_suspend_finish() behave more like _regulator_enable(), it's probably also a good idea to make _regulator_do_enable() robust if it is called on an already enabled rdev. At the moment, _regulator_do_enable() is _not_ robust for already enabled rdevs if we're using an ena_pin. Each time _regulator_do_enable() is called for an rdev using an ena_pin the reference count of the ena_pin is incremented even if the rdev was already enabled. This is not as intended because the ena_pin is for something else: for keeping track of how many active rdevs there are sharing the same ena_pin. Here's how the reference counting works here: * Each time _regulator_enable() is called we increment rdev->use_count, so _regulator_enable() calls need to be balanced with _regulator_disable() calls. * There is no explicit reference counting in _regulator_do_enable() which is normally just a warapper around rdev->desc->ops->enable() with code for supporting delays. It's not expected that the "ops->enable()" call do reference counting. * Since regulator_ena_gpio_ctrl() does have reference counting (handling the sharing of the pin amongst multiple rdevs), we shouldn't call it if the current rdev is already enabled. Note that as part of this we cleanup (remove) the initting of ena_gpio_state in regulator_register(). In _regulator_do_enable(), _regulator_do_disable() and _regulator_is_enabled() is is clear that ena_gpio_state should be the state of whether this particular rdev has requested the GPIO be enabled. regulator_register() was initting it as the actual state of the pin. Fixes: 967cfb18 ("regulator: core: manage enable GPIO list") Signed-off-by:
Doug Anderson <dianders@chromium.org> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Javier Martinez Canillas authored
commit 0548bf4f upstream. The _regulator_do_enable() call ought to be a no-op when called on an already-enabled regulator. However, as an optimization _regulator_enable() doesn't call _regulator_do_enable() on an already enabled regulator. That means we never test the case of calling _regulator_do_enable() during normal usage and there may be hidden bugs or warnings. We have seen warnings issued by the tps65090 driver and bugs when using the GPIO enable pin. Let's match the same optimization that _regulator_enable() in regulator_suspend_finish(). That may speed up suspend/resume and also avoids exposing hidden bugs. [Use much clearer commit message from Doug Anderson] Signed-off-by:
-
Doug Anderson authored
commit 28249b0c upstream. The LDOs are documented in the rk808 datasheet to have a soft start time of 400us. Add that to the driver. If this time takes longer on a certain board the device tree should be able to override with "regulator-enable-ramp-delay". This fixes some dw_mmc probing problems (together with other patches posted to the mmc maiing lists) on rk3288. Signed-off-by:
-
Fugang Duan authored
commit 61615cd2 upstream. When do suspend/resume stress test, some log shows "rcv is not +last". The issue is that enet suspend will disable phy clock, phy link down, after resume back, enet MAC redo initial and ready to tx/rx packet, but phy still is not ready which is doing auto-negotiation. When phy link is not up, don't schdule napi soft irq. [Peter] It has fixed kernel panic after long time suspend/resume test with nfs rootfs. [ 8864.429458] fec 2188000.ethernet eth0: rcv is not +last [ 8864.434799] fec 2188000.ethernet eth0: rcv is not +last [ 8864.440088] fec 2188000.ethernet eth0: rcv is not +last [ 8864.445424] fec 2188000.ethernet eth0: rcv is not +last [ 8864.450782] fec 2188000.ethernet eth0: rcv is not +last [ 8864.456111] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 8864.464225] pgd = 80004000 [ 8864.466997] [00000000] *pgd=00000000 [ 8864.470627] Internal error: Oops: 17 [#1] SMP ARM [ 8864.475353] Modules linked in: evbug [ 8864.479006] CPU: 0 PID: 3 Comm: ksoftirqd/0 Not tainted 4.0.0-rc1-00044-g7a2a1d2 #234 [ 8864.486854] Hardware name: Freescale i.MX6 SoloX (Device Tree) [ 8864.492709] task: be069380 ti: be07a000 task.ti: be07a000 [ 8864.498137] PC is at memcpy+0x80/0x330 [ 8864.501919] LR is at gro_pull_from_frag0+0x34/0xa8 [ 8864.506735] pc : [<802bb080>] lr : [<8057c204>] psr: 00000113 [ 8864.506735] sp : be07bbd4 ip : 00000010 fp : be07bc0c [ 8864.518235] r10: 0000000e r9 : 00000000 r8 : 809c7754 [ 8864.523479] r7 : 809c7754 r6 : bb43c040 r5 : bd280cc0 r4 : 00000012 [ 8864.530025] r3 : 00000804 r2 : fffffff2 r1 : 00000000 r0 : bb43b83c [ 8864.536575] Flags: nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 8864.543904] Control: 10c5387d Table: bd14c04a DAC: 00000015 [ 8864.549669] Process ksoftirqd/0 (pid: 3, stack limit = 0xbe07a210) [ 8864.555869] Stack: (0xbe07bbd4 to 0xbe07c000) [ 8864.560250] bbc0: bd280cc0 bb43c040 809c7754 [ 8864.568455] bbe0: 809c7754 bb43b83c 00000012 8057c204 00000000 bd280cc0 bd8a0718 00000003 [ 8864.576658] bc00: be07bc5c be07bc10 8057ebf0 8057c1dc 00000000 00000000 8057ecc4 bef59760 [ 8864.584863] bc20: 00000002 bd8a0000 be07bc64 809c7754 00000000 bd8a0718 bd280cc0 bd8a0000 [ 8864.593066] bc40: 00000000 0000001c 00000000 bd8a0000 be07bc74 be07bc60 8057f148 8057eb90 [ 8864.601268] bc60: bf0810a0 00000000 be07bcf4 be07bc78 8044e7b4 8057f12c 00000000 8007df6c [ 8864.609470] bc80: bd8a0718 00000040 00000000 bd280a80 00000002 00000019 bd8a0600 bd8a1214 [ 8864.617672] bca0: bd8a0690 bf0810a0 00000000 00000000 bd8a1000 00000000 00000027 bd280cc0 [ 8864.625874] bcc0: 80062708 800625cc 000943db bd8a0718 00000001 000d1166 00000040 be7c1ec0 [ 8864.634077] bce0: 0000012c be07bd00 be07bd3c be07bcf8 8057fc98 8044e3ac 809c2ec0 3ddff000 [ 8864.642280] bd00: be07bd00 be07bd00 be07bd08 be07bd08 00000000 00000020 809c608c 00000003 [ 8864.650481] bd20: 809c6080 40000001 809c6088 00200100 be07bd84 be07bd40 8002e690 8057fac8 [ 8864.658684] bd40: be07bd64 be07bd50 00000001 04208040 000d1165 0000000a be07bd84 809c0d7c [ 8864.666885] bd60: 00000000 809c6af8 00000000 00000001 be008000 00000000 be07bd9c be07bd88 [ 8864.675087] bd80: 8002eb64 8002e564 00000125 809c0d7c be07bdc4 be07bda0 8006f100 8002eaac [ 8864.683291] bda0: c080e10c be07bde8 809c6c6c c080e100 00000002 00000000 be07bde4 be07bdc8 [ 8864.691492] bdc0: 800087a0 8006f098 806f2934 20000013 ffffffff be07be1c be07be44 be07bde8 [ 8864.699695] bde0: 800133a4 80008784 00000001 00000001 00000000 00000000 be7c1680 00000000 [ 8864.707896] be00: be0cfe00 bd93eb40 00000002 00000000 00000000 be07be44 be07be00 be07be30 [ 8864.716098] be20: 8006278c 806f2934 20000013 ffffffff be069380 be7c1680 be07be7c be07be48 [ 8864.724300] be40: 80049cfc 806f2910 00000001 00000000 80049cb4 00000000 be07be7c be7c1680 [ 8864.732502] be60: be3289c0 be069380 bd23b600 be0cfe00 be07bebc be07be80 806ed614 80049c68 [ 8864.740706] be80: be07a000 0000020a 809c608c 00000003 00000001 8002e858 be07a000 be035740 [ 8864.748907] bea0: 00000000 00000001 809d4598 00000000 be07bed4 be07bec0 806edd0c 806ed440 [ 8864.757110] bec0: be07a000 be07a000 be07bee4 be07bed8 806edd68 806edcf0 be07bef4 be07bee8 [ 8864.765311] bee0: 8002e860 806edd34 be07bf24 be07bef8 800494b0 8002e828 be069380 00000000 [ 8864.773512] bf00: be035780 be035740 8004938c 00000000 00000000 00000000 be07bfac be07bf28 [ 8864.781715] bf20: 80045928 80049398 be07bf44 00000001 00000000 be035740 00000000 00030003 [ 8864.789917] bf40: dead4ead ffffffff ffffffff 80a2716c 80b59b00 00000000 8088c954 be07bf5c [ 8864.798120] bf60: be07bf5c 00000000 00000000 dead4ead ffffffff ffffffff 80a2716c 00000000 [ 8864.806320] bf80: 00000000 8088c954 be07bf88 be07bf88 be035780 8004584c 00000000 00000000 [ 8864.814523] bfa0: 00000000 be07bfb0 8000ed10 80045858 00000000 00000000 00000000 00000000 [ 8864.822723] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 8864.830925] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 5ffbb5f7 f9fcf5e7 [ 8864.839115] Backtrace: [ 8864.841631] [<8057c1d0>] (gro_pull_from_frag0) from [<8057ebf0>] (dev_gro_receive+0x6c/0x3f8) [ 8864.850173] r6:00000003 r5:bd8a0718 r4:bd280cc0 r3:00000000 [ 8864.855958] [<8057eb84>] (dev_gro_receive) from [<8057f148>] (napi_gro_receive+0x28/0xac) [ 8864.864152] r10:bd8a0000 r9:00000000 r8:0000001c r7:00000000 r6:bd8a0000 r5:bd280cc0 [ 8864.872115] r4:bd8a0718 [ 8864.874713] [<8057f120>] (napi_gro_receive) from [<8044e7b4>] (fec_enet_rx_napi+0x414/0xc74) [ 8864.883167] r5:00000000 r4:bf0810a0 [ 8864.886823] [<8044e3a0>] (fec_enet_rx_napi) from [<8057fc98>] (net_rx_action+0x1dc/0x2ec) [ 8864.895016] r10:be07bd00 r9:0000012c r8:be7c1ec0 r7:00000040 r6:000d1166 r5:00000001 [ 8864.902982] r4:bd8a0718 [ 8864.905570] [<8057fabc>] (net_rx_action) from [<8002e690>] (__do_softirq+0x138/0x2c4) [ 8864.913417] r10:00200100 r9:809c6088 r8:40000001 r7:809c6080 r6:00000003 r5:809c608c [ 8864.921382] r4:00000020 [ 8864.923966] [<8002e558>] (__do_softirq) from [<8002eb64>] (irq_exit+0xc4/0x138) [ 8864.931289] r10:00000000 r9:be008000 r8:00000001 r7:00000000 r6:809c6af8 r5:00000000 [ 8864.939252] r4:809c0d7c [ 8864.941841] [<8002eaa0>] (irq_exit) from [<8006f100>] (__handle_domain_irq+0x74/0xe8) [ 8864.949688] r4:809c0d7c r3:00000125 [ 8864.953342] [<8006f08c>] (__handle_domain_irq) from [<800087a0>] (gic_handle_irq+0x28/0x68) [ 8864.961707] r9:00000000 r8:00000002 r7:c080e100 r6:809c6c6c r5:be07bde8 r4:c080e10c [ 8864.969597] [<80008778>] (gic_handle_irq) from [<800133a4>] (__irq_svc+0x44/0x5c) [ 8864.977097] Exception stack(0xbe07bde8 to 0xbe07be30) [ 8864.982173] bde0: 00000001 00000001 00000000 00000000 be7c1680 00000000 [ 8864.990377] be00: be0cfe00 bd93eb40 00000002 00000000 00000000 be07be44 be07be00 be07be30 [ 8864.998573] be20: 8006278c 806f2934 20000013 ffffffff [ 8865.003638] r7:be07be1c r6:ffffffff r5:20000013 r4:806f2934 [ 8865.009447] [<806f2904>] (_raw_spin_unlock_irq) from [<80049cfc>] (finish_task_switch+0xa0/0x160) [ 8865.018334] r4:be7c1680 r3:be069380 [ 8865.021993] [<80049c5c>] (finish_task_switch) from [<806ed614>] (__schedule+0x1e0/0x5dc) [ 8865.030098] r8:be0cfe00 r7:bd23b600 r6:be069380 r5:be3289c0 r4:be7c1680 [ 8865.036942] [<806ed434>] (__schedule) from [<806edd0c>] (preempt_schedule_common+0x28/0x44) [ 8865.045307] r9:00000000 r8:809d4598 r7:00000001 r6:00000000 r5:be035740 r4:be07a000 [ 8865.053197] [<806edce4>] (preempt_schedule_common) from [<806edd68>] (_cond_resched+0x40/0x48) [ 8865.061822] r4:be07a000 r3:be07a000 [ 8865.065472] [<806edd28>] (_cond_resched) from [<8002e860>] (run_ksoftirqd+0x44/0x64) [ 8865.073252] [<8002e81c>] (run_ksoftirqd) from [<800494b0>] (smpboot_thread_fn+0x124/0x190) [ 8865.081550] [<8004938c>] (smpboot_thread_fn) from [<80045928>] (kthread+0xdc/0xf8) [ 8865.089133] r10:00000000 r9:00000000 r8:00000000 r7:8004938c r6:be035740 r5:be035780 [ 8865.097097] r4:00000000 r3:be069380 [ 8865.100752] [<8004584c>] (kthread) from [<8000ed10>] (ret_from_fork+0x14/0x24) [ 8865.107990] r7:00000000 r6:00000000 r5:8004584c r4:be035780 [ 8865.113767] Code: e320f000 e4913004 e4914004 e4915004 (e4916004) [ 8865.120006] ---[ end trace b0a4c6bd499288ca ]--- [ 8865.124697] Kernel panic - not syncing: Fatal exception in interrupt [ 8865.131084] ---[ end Kernel panic - not syncing: Fatal exception in interrupt Tested-by:
Peter Chen <peter.chen@freescale.com> Signed-off-by:
Fugang Duan <B38611@freescale.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Brian King authored
commit da293700 upstream. EEH recovery for bnx2x based adapters is not reliable on all Power systems using the default hot reset, which can result in an unrecoverable EEH error. Forcing the use of fundamental reset during EEH recovery fixes this. Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
-
Maxime Ripard authored
commit 8dad0386 upstream. The NDDB register holds the data that are needed by the read and write commands. However, during a read PIO access, the datasheet specifies that after each 32 bytes read in that register, when BCH is enabled, we have to make sure that the RDDREQ bit is set in the NDSR register. This fixes an issue that was seen on the Armada 385, and presumably other mvebu SoCs, when a read on a newly erased page would end up in the driver reporting a timeout from the NAND. Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by:
Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by:
-
