1. 07 Mar, 2002 3 commits
  2. 06 Mar, 2002 5 commits
    • Martin Dalecki's avatar
      [PATCH] IDE 17 (not just cleanup) · a925c40f
      Martin Dalecki authored
      This is actually an attempt to remove some stall code from
      this driver. However if some *real* users complain (Not just
      the usuall: "Hey - if someone!" but the "Hey I'm using this!")
      I'm all open to reenable it. Since I prepared this patch
      yerstoday it doesn't contain the ide_module.h fixup. This will
      follow later.
      
      - Don't use the convoluted byte type in ide-pci.c. Just use the proper
         u8instead.
      
      - Move ide_get_or_set_dma_base to the only place where it's used and
         reorganize the code there by killing the unnecessary
         CONFIG_BLK_DEV_IDEDMA_FORCED configuration option.
      
      - Remove unfunctional CONFIG_PKT_TASK_IOCTL code.
      
      - Kill unused ALTSTAT_SCREW_UP code.
      
      - Tons of dead code removed from ide-taskfile.c (#if 0 #endif and
         friends)
      
      - Remove unused IDE_DEBUG macro as well as lots of other name space
         pollution from ide.h.
      
      - Start using the ide_lock spin-lock for protecting access to data
         structures instead of the excessive interrupt disabling games.
      
      - Shorten the proc ouput of the piix initialization module.
      
      - Remove special /proc tape "name" output from ide-tape.c. This was
         redundant data which should only show up on syslog anyway.
      
      - Kill the REALLY_FAST_IO undef from the ide.h. This was a mistake
         present since far too many years in this driver. The proper way to
         deal with broken systems is to define REALLY_SLOW_IO in system
         dependent headers or particular driver files.  We can always
         reintroduce it easy if real users will complain, since OUT_BYTE() and
         similar can be used as hooks. But I don't expect anybody reporting
         about this. Even on the most broken IDE chip in the world (cmd640
         at VLB) undefining this *always* worked for me. Nearly all the code
         pieces in the ide driver code *reverted* it's effects explicitly
         anyway.
      
      - Remove the obsolete CONFIG_BLK_DEV_4DRIVES support. This was supposed
         to support 4 drivers attached at one channel on some older chipsets,
         in esp. Tekram 690CD, in the last century. They where all supposed to
         work at a register set starting at the base address 0x1f0.  Before
         complaining that this is removing functionality, please note that this
         must have been broken for already quite a long time, since the ide
         driver didn't contain the special device selection methods implicated
         by this any longer.  It didn't scan   this port too if PCI host chip
         support was enabled (as it is in all those distributions around
         there).  On the other hand this is the most prominent case of
         incoherent use of the mate member in the struct hwif_s. And please
         think about how big the probability is, that there are systems out
         there, where there are actually 4 drivers on such a channel?
      
      - Streamline module initialization code by removing one shoot functions.
      
      - Make the WAIT_READY value used in case of CONFIG_APM or
         CONFIG_APM_MODULE the default, since this is what really reflects the
         behavior of modern drives. It won't hurt any other case and finally
         removing it is reducing the necessary coverage for overall driver code
         testing/analysis.
      
      - Move the IDE_LARGE_SEEK macro to the only place where it's actually
         used. Replace the IDE_MIN() and IDE_MAX() drivers with the obvious.
         Remove unused SPLIT_WORD and MAKE WORD from the local header.
      
      - Remove CMD640_DUMP_REGS from global scope, since there is no
         development done on this any longer. Finally, the way the host chip
         initialization routines are called changed in the time between allows
         this to remain fully local to the host chip driver in question.
      
      - Some spell checking of comments in the code. (Yeep I have extended my
         Vim to do this the "Word" way with nice undercurl lines... mozilla
         remains to be fixed...)
      a925c40f
    • Linus Torvalds's avatar
      Merge bk://linuxvm.bkbits.net/linux-2.5-vmtidbits · 6aa0c79e
      Linus Torvalds authored
      into penguin.transmeta.com:/home/penguin/torvalds/repositories/kernel/linux
      6aa0c79e
    • Alexander Viro's avatar
      [PATCH] Re: "rename" breakage? · 00cbd440
      Alexander Viro authored
      The fix for rename broke "link()". Fixed.
      00cbd440
    • Linus Torvalds's avatar
      Kernel lock exclusion is actually needed in the boot sequence, · c2ba4e3c
      Linus Torvalds authored
      so we need to make init_idle() aware of it so that it gets the
      preempt_count initialization right.
      c2ba4e3c
    • Linus Torvalds's avatar
      Fix percpu patch breakage · d6e4bed6
      Linus Torvalds authored
      d6e4bed6
  3. 05 Mar, 2002 29 commits
    • Alexander Viro's avatar
      [PATCH] Re: "rename" breakage? · ddffeb01
      Alexander Viro authored
      I've found what's going on there.  Basically, we should not use
      __user_walk() with LOOKUP_PARENT - nd->last.name is set to the last
      component of the name and freeing that name before we are done is not a
      good idea. 
      ddffeb01
    • Linus Torvalds's avatar
      update defconfig file · cd266913
      Linus Torvalds authored
      cd266913
    • Robert Love's avatar
      [PATCH] Re: [PATCH] idle task preempt_count fix · a2329c27
      Robert Love authored
      On SMP systems, preempt_count is erroneously set to 1 for idle task's on
      all CPU besides CPU0.  This patch sets preempt_count properly.
      
      	Robert Love
      a2329c27
    • Andries E. Brouwer's avatar
      [PATCH] BSD partition handling · ecc0b50d
      Andries E. Brouwer authored
      I see that this is fixed now in 2.2 and 2.4, but 2.5 still has broken
      BSD partition handling.  Here a fix.
      
      Andries
      ecc0b50d
    • Adam Radford's avatar
      [PATCH] 3ware driver update for 2.5.6-pre3 · e4a89040
      Adam Radford authored
       - Fix bug in tw_aen_complete() where aen's could be lost.
         Fix tw_aen_drain_queue() to display useful info at init.
         Set tw_host->max_id for 12 port cards.
         Add ioctl support for raw command packet post from userspace
         with sglist fragments (parameter and io).
       - Fix read capacity to under report by 1 sector to fix get
         last sector ioctl.
       - Fix bug where more AEN codes weren't coming out during
         driver initialization.
         Improved handling of PCI aborts.
       - Fix bug in tw_findcards() where AEN code could be lost.
         Increase timeout in tw_aen_drain_queue() to 30 seconds.
       - Re-write raw command post with data ioctl method.
         Remove raid5 bounce buffers for raid5 for 6XXX for kernel 2.5
         Add tw_map/unmap_scsi_sg/single_data() for kernel 2.5
         Replace io_request_lock with host_lock for kernel 2.5
         Set max_cmd_len to 16 for 3dm for kernel 2.5
       - Set host->max_sectors back up to 256.
       - Modified pci parity error handling/clearing from config space
         during initialization.
       - Better handling of request sense opcode and sense information
         for failed commands.  Add tw_decode_sense().
         Replace all mdelay()'s with scsi_sleep().
       - Revert mdelay's and scsi_sleep's, this caused problems on
         some SMP systems.
       - Add pci_set_dma_mask(), rewrite kmalloc()/virt_to_bus() to
         pci_alloc/free_consistent().
      e4a89040
    • Linus Torvalds's avatar
      Merge bk://bcrlbits.bkbits.net/linux-2.5 · fef4227e
      Linus Torvalds authored
      into penguin.transmeta.com:/home/penguin/torvalds/repositories/kernel/linux
      fef4227e
    • Maciej W. Rozycki's avatar
      [PATCH] 2.4.18, 2.5.5: I/O APIC through-8259A mode IRQ 0 routing · 04a868aa
      Maciej W. Rozycki authored
       There is a problem with the through-8259A mode for IRQ 0 on I/O APIC
      systems.  Depending on correctness of an MP table, IRQ 0 routing is either
      not registered at all or registered at a wrong pin.  As a result the 8254
      timer IRQ only works by an accident (it's edge-triggered and never
      disabled/enabled so it happens to survive this incorrect configuration).
      A visible effect is you can't change the affinity for IRQ 0.
      
       Following is a patch that fixes both cases referred to above.  The code
      looks obvious but it was additionally run-time tested just in case.  The
      issue is serious -- please apply the patch ASAP.  As no changes were done
      to io_apic.c since the development fork, the patch applies cleanly both to
      2.4 and to 2.5.
      
       Credit goes to Joe for discovering the affinity problem and providing a
      fix proposal (incorporated in the final one).
      
        Maciej
      04a868aa
    • Linus Torvalds's avatar
      Automerge · 28bb7028
      Linus Torvalds authored
      28bb7028
    • Linus Torvalds's avatar
      Automerge · 38609200
      Linus Torvalds authored
      38609200
    • Martin Dalecki's avatar
      [PATCH] 2.5.6-pre2 IDE cleanup 16 · 24ae9cff
      Martin Dalecki authored
      There is no such a thing like a ide-clean-15. Never was.  But here comes
      what has been done in ide-clean-16:
      
      - Apply a patch for the initialization of the second PIIX channel.
         Found by Daniel Quinlan <quinlan@transmeta.com>
      
      - Apply a patch for the DMA initialization of the serverworks chip.
         Ken Brownfield <brownfld@irridia.com>
      
      - Make the ata_operations methods immune against device type drivers,
         which donot provide them by separating the access to them out. Audit
         them all.
      
      - Resynchronize with 2.5.6-pre1.
      
      - Remove unused IDE_DRIVE_CMD, IDE_DRIVE_TASK, IDE_DRIVE_TASK_MASK,
         IDE_DRIVE_TASKFILE macros.
      
      - Disable configuration of the task file stuff. It is going to go away
         and will be replaced by a truly abstract interface based on
         functionality and *not* direct mess-up of hardware.
      
      - Resync with 2.5.6-pre2.
      
      - Add HPT entries to the fall-back list, since otherwise the driver
         won'trecognize the drives. We will have to make this the default
         behavior for allnot recognized host chip types.
      
      - Fix compilation with no PCI host chip support enabled.
      
      - Apply the overflow fixes for HPT366 by Vojtech Pavlik.
      
      - Kill the one-shoot functions ide_wait_cmd_taks() ide_wait_cmd() by
         moving them to the places where they are actually used. Fix a
         potential buffer overflow on the way.
      
      - Fix usage of ide.c as module. Thanks to Adam J. Richter for figuring
         out what was wrong.
      
      - Various cleanups all along as well as removal of TONS of
         unfinished/dead code.
      
      I think it's sometimes better to remove stuff, which isn't there,
      instead of hoping for a "magical day" where it will be finished.
      24ae9cff
    • Rusty Russell's avatar
      [PATCH] per-cpu areas · 3d7af078
      Rusty Russell authored
      This is the Richard Henderson-approved, cleaner, brighter per-cpu patch.
      3d7af078
    • Corey Minyard's avatar
      [PATCH] Re: PPP and shared zlib code in 2.5 · 09c1076e
      Corey Minyard authored
      Ok, I found it.  The problem was in the decompression code.
      
      In inflate.c, in the routine zlib_inflate(), it reuses the passed-in "f"
      parameter as a return value, but the PPP packet compression stuff needs
      that return value later.
      09c1076e
    • Brian Gerst's avatar
      [PATCH] Better kmalloc effeciency · 455d075a
      Brian Gerst authored
      This patch adds two intermediate general cache sizes, 96 and 192 bytes.
      On my system this saves about 34k.
      
      size-256              63    180    256    5   12    1
      size-192              95    120    192    5    6    1
      size-128             213    240    128    8    8    1
      size-96             1080   1120     96   28   28    1
      455d075a
    • Robert Love's avatar
      [PATCH] 2.5: preempt on UP critical fix · e868c063
      Robert Love authored
      During 2.5.5-pre schedule_tail was optimized away under UP.  We need it
      for preempt-kernel, too, since it decrements the preempt_count to 0
      coming off do_fork.
      
      Without this patch, CONFIG_PREEMPT + !CONFIG_SMP does not gain one very
      much.  
      
      	Robert Love
      e868c063
    • Linus Torvalds's avatar
      Merge bk://bk.arm.linux.org.uk · f60852d2
      Linus Torvalds authored
      into penguin.transmeta.com:/home/penguin/torvalds/repositories/kernel/linux
      f60852d2
    • Linus Torvalds's avatar
      Merge bk://linuxusb.bkbits.net/linus-2.5 · a22655dc
      Linus Torvalds authored
      into penguin.transmeta.com:/home/penguin/torvalds/repositories/kernel/linux
      a22655dc
    • Alexander Viro's avatar
      [PATCH] Remove SWP_BLOCKDEV · 246998f1
      Alexander Viro authored
      	Below is a followup to bd_claim patch - it is the last one
      from the current series.  Removes SWP_BLOCKDEV flag - it isn't needed
      anymore.
      246998f1
    • Alexander Viro's avatar
      [PATCH] death of is_mounted() and aother fixes · 75e9c9e1
      Alexander Viro authored
      *	new functions - bd_claim(bdev, holder) and bd_release(bdev).
      	bd_claim(bdev, holder) fails is device is already claimed by
      	somebody else; bd_release(bdev) gives device up.
      
      *	get_sb_bdev() claims device for fs_type; it means that we don't need
      	to look through entire least of superblocks anymore - just through
      	the list of superblocks belonging to that type (i.e. the same thing
      	we do for non-block filesystems; that will allow to merge quite a
      	bit of code afterwards).
      
      *	sys_swapon claims device for itself;  free exclusion with mounting,
      	end of problems with bogus set_blocksize().
      
      *	is_mounted() and is_swap_partition() are gone - what we actually
      	wanted was "try to claim device for ourselves".  Which we can do
      	now - without races inherent to is_mounted()/is_swap_partition().
      
      *	RAID lock_rdev() claims device for itself.  I.e. we get rid of
      	is_mounted() in there (BTW, is_swap_partition() was missing) and
      	we get protection both ways - not only RAID won't take an already
      	mounted device, but mount won't stomp on a device claimed by RAID.
      
      There are other places that would benefit from the same (e.g. ext3 with
      external journal almost definitely wants to claim device for itself).
      
      Notice that it's a cooperative thing - neither open() nor raw device stuff
      claim the block device, so they don't care if device is mounted, etc.  So
      we don't break fsck and friends - exclusion is between those who know that
      they want that exclusion.
      75e9c9e1
    • Alexander Viro's avatar
      [PATCH] (3/3) more kdev_t removals · d9036aaf
      Alexander Viro authored
      d9036aaf
    • Alexander Viro's avatar
      [PATCH] (2/3) more kdev_t removals · ebe5c28e
      Alexander Viro authored
      ebe5c28e
    • Alexander Viro's avatar
      [PATCH] (1/3) more kdev_t removals · b3954b06
      Alexander Viro authored
      	1.	moves a bunch of generic ioctls from sr_dev_ioctl() to
      		cdrom_ioctl().
      	2.	switches blk_ioctl() to struct block_device *
      	3.	ditto for blkpg_ioctl()
      b3954b06
    • Alexander Viro's avatar
      [PATCH] export for dparent_lock · 0e7e6fda
      Alexander Viro authored
      	Missing export for dparent_lock.
      0e7e6fda
    • Jean Tourrilhes's avatar
      [PATCH] : ir256_usb_cow_urballoc.diff · b6684ff2
      Jean Tourrilhes authored
      ir256_usb_cow_urballoc.diff :
       ---------------------------
      	o [FEATURE] Don't use skb_cow() unless we really need to
      	o [CORRECT] Reorder URB init to avoid races
      	o [CORRECT] USB dealy adds processing time, not removes it
              <Following patch from Greg KH <greg@kroah.com> himself !!!>
      	o [CRITICA] Use dynamically allocated URBs (instead of statically)
      b6684ff2
    • Jean Tourrilhes's avatar
      [PATCH] : ir256_lap_icmd_fix-4.diff · 1489877f
      Jean Tourrilhes authored
      ir256_lap_icmd_fix-4.diff :
       -------------------------
      	o [CORRECT] Fix Tx queue handling (remove race, keep packets in order)
      	o [CORRECT] Synchronise window_size & line_capacity and make sure
      	  we never forget to increase them (would stall Tx queue)
      	o [FEATURE] Group common code out of if-then-else
      	o [FEATURE] Don't harcode LAP header size, use proper constant
      	o [FEATURE] Inline irlap_next_state() to decrease bloat
      1489877f
    • Jean Tourrilhes's avatar
      [PATCH] : ir256_irnet_disc_ind.diff · 5ba24bbf
      Jean Tourrilhes authored
      ir256_irnet_disc_ind.diff :
       -------------------------
      	o [CORRECT] Fix IrNET disconnection to not reconnect but
      	  instead to hangup pppd
      5ba24bbf
    • Jean Tourrilhes's avatar
      [PATCH] : ir256_sock_connect_cli.diff · a23389e4
      Jean Tourrilhes authored
      ir256_sock_connect_cli.diff :
       ---------------------------
      	o [CRITICA] Fix socket connect to remove dangerous cli()
      	<Tested on SMP>
      a23389e4
    • Jean Tourrilhes's avatar
      [PATCH] : ir256_bus_to_virt.diff · a18e3e5c
      Jean Tourrilhes authored
      ir256_bus_to_virt.diff :
       ----------------------
      	o [CRITICA] Fix ISA FIR drivers for new DMA API
      	<PCI FIR drivers are still broken and need fixing>
      a18e3e5c
    • Russell King's avatar
      Merge flint.arm.linux.org.uk:/usr/src/linux-bk-2.5/linux-2.5-rmk-patchtest · ed78e24b
      Russell King authored
      into flint.arm.linux.org.uk:/usr/src/linux-bk-2.5/linux-2.5-rmk
      ed78e24b
    • Stefan Eletzhofer's avatar
      [PATCH] 1022/1: Initial PCMCIA support for PT Digital Board · eed3ac83
      Stefan Eletzhofer authored
      This patch adds PCMCIA/CF support for the
      PT Digital Board (CONFIG_SA1100_PT_SYSTEM3).
      
      2nd try .... :)
      
      Changed files:
      linux/drivers/pcmcia/Makefile
      linux/drivers/pcmcia/sa1100.h
      linux/drivers/pcmcia/sa1100_generic.c
      Added files:
      linux/drivers/pcmcia/sa1100_system3.c
      eed3ac83
  4. 04 Mar, 2002 3 commits