- 24 Jun, 2022 31 commits
-
-
Eric Dumazet authored
pim6_rcv() is called under rcu_read_lock(), there is no need to use dev_hold()/dev_put() pair. IPv4 side was handled in commit 55747a0a ("ipmr: __pim_rcv() is called under rcu_read_lock") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Arun Ramadoss says: ==================== net: dsa: microchip: common spi probe for the ksz series switches - part 2 This patch series aims to refactor the ksz_switch_register routine to have the common flow for the ksz series switch. And this is the follow up patch series. First, it tries moves the common implementation in the setup from individual files to ksz_setup. Then implements the common dsa_switch_ops structure instead of independent registration. And then moves the ksz_dev_ops to ksz_common.c, it allows the dynamic detection of which ksz_dev_ops to be used based on the switch detection function. Finally, the patch updates the ksz_spi probe function to be same for all the ksz_switches. ==================== Signed-off-by: -
Arun Ramadoss authored
As of now, there are two spi probes, one ksz8795_spi.c and other ksz9477_spi.c. This patch combines two files into single ksz_spi.c. The difference between the two are regmap config and struct ksz8. The regmap config is assigned based on the platform data. And struct ksz8 is left untouched, as it is used only ksz8795.c. It can be used for all other switches also in future. Signed-off-by:
Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by:
-
Arun Ramadoss authored
This patch delete the ksz8_switch_register and ksz9477_switch_register since both are calling the ksz_switch_register function. Instead the ksz_switch_register is called from the probe function. Signed-off-by:
-
Arun Ramadoss authored
This patch move the ksz_dev_ops from individual files to ksz_common.c. And the dev_ops is assigned to ksz_device based on the switch detect. This reduces the redundant function and allows to reuse the functionality for LAN937x which has similar register set. Signed-off-by:
-
Arun Ramadoss authored
This patch replaces the two different menuconfig for ksz9477 and ksz8795 to single ksz_common. so that it can be extended for the other switch like lan937x. And removes the export_symbols for the extern functions in the ksz_common.h. Signed-off-by:
-
Arun Ramadoss authored
As per 'commit 3506b2f4 ("net: dsa: microchip: call phy_remove_link_mode during probe")' phy_remove_link_mode is added in the switch_register function after dsa_switch_register. In order to have the common switch register function, moving this phylink validation to phylink_get_caps validation hook. Signed-off-by:
-
Arun Ramadoss authored
At present, ksz8795.c and ksz9477.c have separate dsa_switch_ops structure initialization. This patch modifies the files such a way that ksz switches has common dsa_switch_ops in the ksz_common.c file. Signed-off-by:
-
Arun Ramadoss authored
This patch move the setting the start bit from the individual switch configuration to ksz_setup Signed-off-by:
-
Arun Ramadoss authored
This patch moves the enabling the multicast storm protection from individual setup function to ksz_setup function. Signed-off-by:
-
Arun Ramadoss authored
This patch move the 10% broadcast protection from the individual setup to ksz_setup. In the ksz9477, broadcast protection is updated in reset function. Signed-off-by:
-
Arun Ramadoss authored
This patch move the common initialization of switches to ksz_setup and perform the switch specific initialization using the ksz_dev_ops function pointer. Signed-off-by:
-
Arun Ramadoss authored
In order to transmit the STP BPDU packet to the CPU port, the STP address 01-80-c2-00-00-00 has to be added to static alu table for ksz8795 series switch. For the ksz9477 switch, there is reserved multicast table which handles forwarding the particular set of multicast address to cpu port. So enabling the multicast reserved table and updated the cpu port index. The stp addr is enabled during the setup phase using the enable_stp_addr pointer in struct ksz_dev_ops. Signed-off-by:
-
Arun Ramadoss authored
To have the common set of initialization in ksz_setup, introduced the new config_cpu_port member to ksz_dev_ops. Since both the ksz8795.c and ksz9477.c configuring the cpu port in the setup function, introduced the member. Signed-off-by:
-
Arun Ramadoss authored
This patch renames the shutdown to reset in ksz_dev_ops in order to use the reset dev_ops in the ksz_setup. Signed-off-by:
-
David S. Miller authored
Hangbin Liu says: ==================== Bonding: add per-port priority support This patch set add per-port priority for bonding failover re-selection. The first patch add a new filed for bond_opt_value so we can set slave value easier. I will update the bond_option_queue_id_set() setting in later patch. The second patch add the per-port priority for bonding. I defined it as s32 to compatible with team prio option, which also use a s32 value. v3: store slave_dev in bond_opt_value directly to simplify setting values for slave. v2: using the extant bonding options management stuff instead setting slave prio in bond_slave_changelink() directly. ==================== Signed-off-by: -
Hangbin Liu authored
Add per port priority support for bonding active slave re-selection during failover. A higher number means higher priority in selection. The primary slave still has the highest priority. This option also follows the primary_reselect rules. This option could only be configured via netlink. Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Acked-by:
Jonathan Toppins <jtoppins@redhat.com> Signed-off-by:
-
Hangbin Liu authored
Currently, bond_opt_value are mostly used for bonding option settings. If we want to set a value for slave, we need to re-alloc a string to store both slave name and vlaue, like bond_option_queue_id_set() does, which is complex and dumb. As Jon suggested, let's add a union field slave_dev for bond_opt_value, which will be benefit for future slave option setting. In function __bond_opt_init(), we will always check the extra field and set it if it's not NULL. Suggested-by:
-
Jiang Jian authored
Remove the repeated word 'and' from comments Signed-off-by:
Jiang Jian <jiangjian@cdjrlc.com> Link: https://lore.kernel.org/r/20220622144841.21274-1-jiangjian@cdjrlc.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jiang Jian authored
Remove the repeated word 'and' from comments Signed-off-by:
-
Michael Walle authored
The GPY115 and GPY2xx PHYs contain an integrated temperature sensor. It accuracy is +/- 5°C. Add support for it. Signed-off-by:
Michael Walle <michael@walle.cc> Acked-by:
Guenter Roeck <linux@roeck-us.net> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220622141716.3517645-1-michael@walle.ccSigned-off-by:
-
Jakub Kicinski authored
Michael Walle says: ==================== net: use new hwmon_sanitize_name() These are the remaining patches of my former series [1] which were hold back because it would have required a stable branch between the subsystems. [1] https://lore.kernel.org/r/20220405092452.4033674-1-michael@walle.cc/ ==================== Link: https://lore.kernel.org/r/20220622123543.3463209-1-michael@walle.ccSigned-off-by:
-
Michael Walle authored
Instead of open-coding the bad characters replacement in the hwmon name, use the new devm_hwmon_sanitize_name(). Signed-off-by:
-
Michael Walle authored
Instead of open-coding the bad characters replacement in the hwmon name, use the new hwmon_sanitize_name(). Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Acked-by:
-
Jakub Kicinski authored
Jonathan Lemon says: ==================== Broadcom PTP PHY support This adds PTP support for the Broadcom PHY BCM54210E (and the specific variant BCM54213PE that the rpi-5.15 branch uses). This has only been tested on the RPI CM4, which has one port. There are other Broadcom chips which may benefit from using the same framework here, although with different register sets. ==================== Link: https://lore.kernel.org/r/20220622050454.878052-1-jonathan.lemon@gmail.comSigned-off-by:
-
Jonathan Lemon authored
The perout function is used to generate a 1PPS signal, synchronized to the PHC. This is accomplished by a using the hardware oneshot functionality, which is reset by a timer. The external timestamp function is set up for a 1PPS input pulse, and uses a timer to poll for temestamps. Both functions use the SYNC_OUT/SYNC_IN1 pin, so cannot run simultaneously. Co-developed-by:
Lasse Johnsen <l@ssejohnsen.me> Signed-off-by:
Jonathan Lemon <jonathan.lemon@gmail.com> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Jonathan Lemon authored
This adds PTP support for BCM54210E Broadcom PHYs, in particular, the BCM54213PE, as used in the Rasperry PI CM4. It has only been tested on that hardware. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Jonathan Lemon authored
Add 'struct bcm_ptp_private' to bcm54xx_phy_priv which points to an optional PTP structure attached to the PHY. This is allocated on probe if PHY PTP support is configured, and if the driver supports PTP for the specified PHY. Add the bcm_ptp_probe(), bcm_ptp_config_init() and bcn_ptp_stop() API functions to the bcm-phy library. Signed-off-by:
-
Jakub Kicinski authored
Russell King says: ==================== net: dsa: mv88e6xxx: get rid of SPEED_MAX This series does two things: 1. it gets rid of mv88e6065_port_set_speed_duplex() which is completely unused (do we support this device? I couldn't find it in the tables in chip.c) This has a max speed of 200Mbps which we don't support. 2. get rid of the SPEED_MAX constant, which is used to configure a DSA or CPU port to their maximum speed during initialisation. We no longer need this as we can derive the maximum port speed from the mac_capabilities instead. The reason for making this change is in preparation for phylink to be used by DSA for CPU ports. This omission has come back to bite us with the conversion of DSA drivers to phylink_pcs, since phylink_pcs won't get used unless phylink is being used. Particularly with this driver, it is very common for DT descriptions to omit the fixed-link details which means "use maximum speed". It will eventually be necessary to hoist the selection of "max speed" into the DSA layer (trivial) and also have a way for the DSA driver to tell the DSA layer which interface it should be using for these ports. ==================== Link: https://lore.kernel.org/r/YrGQBssOvQBZiDS4@shell.armlinux.org.ukSigned-off-by:
-
Russell King authored
Currently, all the device specific speed setting functions convert SPEED_MAX to the actual speed of the port. Rather than having each of the mv88e6xxx chip specifics handling SPEED_MAX, derive it from the mac_capabilities instead. This is only needed for CPU and DSA ports, so move the logic up into mv88e6xxx_setup_port() - which allows us to kill off all users of SPEED_MAX throughout the driver. Signed-off-by:
-
Russell King (Oracle) authored
Remove mv88e6065_port_set_speed_duplex() - this is never called, and thus is completely redundant. Signed-off-by:
-
- 23 Jun, 2022 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
No conflicts. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from bpf and netfilter. Current release - regressions: - netfilter: cttimeout: fix slab-out-of-bounds read in cttimeout_net_exit Current release - new code bugs: - bpf: ftrace: keep address offset in ftrace_lookup_symbols - bpf: force cookies array to follow symbols sorting Previous releases - regressions: - ipv4: ping: fix bind address validity check - tipc: fix use-after-free read in tipc_named_reinit - eth: veth: add updating of trans_start Previous releases - always broken: - sock: redo the psock vs ULP protection check - netfilter: nf_dup_netdev: fix skb_under_panic - bpf: fix request_sock leak in sk lookup helpers - eth: igb: fix a use-after-free issue in igb_clean_tx_ring - eth: ice: prohibit improper channel config for DCB - eth: at803x: fix null pointer dereference on AR9331 phy - eth: virtio_net: fix xdp_rxq_info bug after suspend/resume Misc: - eth: hinic: replace memcpy() with direct assignment" * tag 'net-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits) net: openvswitch: fix parsing of nw_proto for IPv6 fragments sock: redo the psock vs ULP protection check Revert "net/tls: fix tls_sk_proto_close executed repeatedly" virtio_net: fix xdp_rxq_info bug after suspend/resume igb: Make DMA faster when CPU is active on the PCIe link net: dsa: qca8k: reduce mgmt ethernet timeout net: dsa: qca8k: reset cpu port on MTU change MAINTAINERS: Add a maintainer for OCP Time Card hinic: Replace memcpy() with direct assignment Revert "drivers/net/ethernet/neterion/vxge: Fix a use-after-free bug in vxge-main.c" net: phy: smsc: Disable Energy Detect Power-Down in interrupt mode ice: ethtool: Prohibit improper channel config for DCB ice: ethtool: advertise 1000M speeds properly ice: Fix switchdev rules book keeping ice: ignore protocol field in GTP offload netfilter: nf_dup_netdev: add and use recursion counter netfilter: nf_dup_netdev: do not push mac header a second time selftests: netfilter: correct PKTGEN_SCRIPT_PATHS in nft_concat_range.sh net/tls: fix tls_sk_proto_close executed repeatedly erspan: do not assume transport header is always set ... -
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull MMC fixes from Ulf Hansson: - mtk-sd: Fix dma hang issues - sdhci-pci-o2micro: Fix card detect by dealing with debouncing * tag 'mmc-v5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: mediatek: wait dma stop bit reset to 0 mmc: sdhci-pci-o2micro: Fix card detect by dealing with debouncing
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "All small changes, mostly device-specific: - A regression fix for PCM WC-page allocation on x86 - A regression fix for i915 audio component binding - Fixes for (longstanding) beep handling bug - Runtime PM fixes for Intel LPE HDMI audio - A couple of pending FireWire fixes - Usual HD-audio and USB-audio quirks, new Intel dspconf entries" * tag 'sound-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek: Add quirk for Clevo NS50PU ALSA: hda: Fix discovery of i915 graphics PCI device ALSA: hda/via: Fix missing beep setup ALSA: hda/conexant: Fix missing beep setup ALSA: memalloc: Drop x86-specific hack for WC allocations ALSA: hda/realtek: Add quirk for Clevo PD70PNT ALSA: x86: intel_hdmi_audio: use pm_runtime_resume_and_get() ALSA: x86: intel_hdmi_audio: enable pm_runtime and set autosuspend delay ALSA: hda: intel-nhlt: remove use of __func__ in dev_dbg ALSA: hda: intel-dspcfg: use SOF for UpExtreme and UpExtreme11 boards firewire: convert sysfs sprintf/snprintf family to sysfs_emit firewire: cdev: fix potential leak of kernel stack due to uninitialized value ALSA: hda/realtek: Apply fixup for Lenovo Yoga Duet 7 properly ALSA: hda/realtek - ALC897 headset MIC no sound ALSA: usb-audio: US16x08: Move overflow check before array access ALSA: hda/realtek: Add mute LED quirk for HP Omen laptop
-
Sixiang Chen authored
Add support for ethtool -p|--identify by enabling blinking of the panel LED if supported by the NIC firmware. Signed-off-by:
Sixiang Chen <sixiang.chen@corigine.com> Signed-off-by:
Simon Horman <simon.horman@corigine.com> Acked-by:
Paolo Abeni <pabeni@redhat.com>
-
Rosemarie O'Riorden authored
When a packet enters the OVS datapath and does not match any existing flows installed in the kernel flow cache, the packet will be sent to userspace to be parsed, and a new flow will be created. The kernel and OVS rely on each other to parse packet fields in the same way so that packets will be handled properly. As per the design document linked below, OVS expects all later IPv6 fragments to have nw_proto=44 in the flow key, so they can be correctly matched on OpenFlow rules. OpenFlow controllers create pipelines based on this design. This behavior was changed by the commit in the Fixes tag so that nw_proto equals the next_header field of the last extension header. However, there is no counterpart for this change in OVS userspace, meaning that this field is parsed differently between OVS and the kernel. This is a problem because OVS creates actions based on what is parsed in userspace, but the kernel-provided flow key is used as a match criteria, as described in Documentation/networking/openvswitch.rst. This leads to issues such as packets incorrectly matching on a flow and thus the wrong list of actions being applied to the packet. Such changes in packet parsing cannot be implemented without breaking the userspace. The offending commit is partially reverted to restore the expected behavior. The change technically made sense and there is a good reason that it was implemented, but it does not comply with the original design of OVS. If in the future someone wants to implement such a change, then it must be user-configurable and disabled by default to preserve backwards compatibility with existing OVS versions. Cc: stable@vger.kernel.org Fixes: fa642f08 ("openvswitch: Derive IP protocol number for IPv6 later frags") Link: https://docs.openvswitch.org/en/latest/topics/design/#fragmentsSigned-off-by:
Rosemarie O'Riorden <roriorden@redhat.com> Acked-by:
Eelco Chaudron <echaudro@redhat.com> Link: https://lore.kernel.org/r/20220621204845.9721-1-roriorden@redhat.comSigned-off-by:
-
Jakub Kicinski authored
Commit 8a59f9d1 ("sock: Introduce sk->sk_prot->psock_update_sk_prot()") has moved the inet_csk_has_ulp(sk) check from sk_psock_init() to the new tcp_bpf_update_proto() function. I'm guessing that this was done to allow creating psocks for non-inet sockets. Unfortunately the destruction path for psock includes the ULP unwind, so we need to fail the sk_psock_init() itself. Otherwise if ULP is already present we'll notice that later, and call tcp_update_ulp() with the sk_proto of the ULP itself, which will most likely result in the ULP looping its callbacks. Fixes: 8a59f9d1 ("sock: Introduce sk->sk_prot->psock_update_sk_prot()") Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Reviewed-by:
Jakub Sitnicki <jakub@cloudflare.com> Tested-by:
-
Jakub Kicinski authored
This reverts commit 69135c57. This commit was just papering over the issue, ULP should not get ->update() called with its own sk_prot. Each ULP would need to add this check. Fixes: 69135c57 ("net/tls: fix tls_sk_proto_close executed repeatedly") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueJakub Kicinski authored
Tony Nguyen says: ==================== 40GbE Intel Wired LAN Driver Updates 2022-06-21 This series contains updates to i40e driver only. Mateusz adds support for using the speed option in ethtool. Minghao Chi removes unneeded synchronize_irq() calls. Bernard Zhao removes unneeded NULL check. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: intel/i40e: delete if NULL check before dev_kfree_skb i40e: Remove unnecessary synchronize_irq() before free_irq() i40e: Add support for ethtool -s <interface> speed <speed in Mb> ==================== Link: https://lore.kernel.org/r/20220621225930.632741-1-anthony.l.nguyen@intel.comSigned-off-by:
-
