- 29 May, 2019 30 commits
-
-
Boris Brezillon authored
Use the v4l2_apply_frmsize_constraints() helper instead of open-coding it. Signed-off-by:
Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Boris Brezillon authored
The rockchip VPU driver is open-coding this logic which seems pretty generic. Let's provide an helper to apply the min/max and alignment constraints on width/height. Signed-off-by:
-
Boris Brezillon authored
Width/height and 4CC formats are expressed using u32 types everywhere, let's fix the v4l2_fill_pixfmt[_mp]() prototypes to do the same. Signed-off-by:
-
Hans Verkuil authored
Commit b6c96e15 inadvertently also dropped the 'msg->len > 1' test from the preceding sanity check. This caused compliance test failures. Fixes: b6c96e15 ("media: cec: allow any initiator for Ping and Image/Text View On") Signed-off-by:
-
Kefeng Wang authored
if saa7164_proc_create() fails, saa7164_fini() will trigger a warning, name 'saa7164' WARNING: CPU: 1 PID: 6311 at fs/proc/generic.c:672 remove_proc_entry+0x1e8/0x3a0 ? remove_proc_entry+0x1e8/0x3a0 ? try_stop_module+0x7b/0x240 ? proc_readdir+0x70/0x70 ? rcu_read_lock_sched_held+0xd7/0x100 saa7164_fini+0x13/0x1f [saa7164] __x64_sys_delete_module+0x30c/0x480 ? __ia32_sys_delete_module+0x480/0x480 ? __x64_sys_clock_gettime+0x11e/0x1c0 ? __x64_sys_timer_create+0x1a0/0x1a0 ? trace_hardirqs_off_caller+0x40/0x180 ? do_syscall_64+0x18/0x450 do_syscall_64+0x9f/0x450 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fix it by checking the return of proc_create_single() before calling remove_proc_entry(). Signed-off-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by:
-
Hans Verkuil authored
You can't memset the contents of a __user pointer. Instead, call copy_to_user to copy links.reserved (which is zeroed) to the user memory. This fixes this sparse warning: SPARSE:drivers/media/mc/mc-device.c drivers/media/mc/mc-device.c:521:16: warning: incorrect type in argument 1 (different address spaces) Fixes: f4930887 ("media: media_device_enum_links32: clean a reserved field") Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Hans Verkuil authored
The reserved field array for struct media_link_desc has length 2, not 4. And the reserved field array of struct media_links_enum was never documented at all. Signed-off-by:
-
Wen Yang authored
The call to of_find_device_by_node returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c:60:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 38, but without a corresponding object release within this function. drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c:63:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 38, but without a corresponding object release within this function. drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c:72:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 38, but without a corresponding object release within this function. Signed-off-by:
Wen Yang <wen.yang99@zte.com.cn> Signed-off-by:
-
Wen Yang authored
The call to of_parse_phandle returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: drivers/media/platform/mtk-vpu/mtk_vpu.c:477:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 464, but without a corresponding object release within this function. Signed-off-by:
-
Mauro Carvalho Chehab authored
As we did a major change on this file, let's take the moment to cleanup several coding style issues on it. This patch was partially done with the help of two tools: ./scripts/checkpatch.pl --fix-inplace --strict astyle --indent=tab=8 --style=linux But manually adjusted in order to fit our style. Signed-off-by: -
Mauro Carvalho Chehab authored
As this driver had a major change, let's take the opportunity and do some coding style cleanup, in order to make it compliant with Kernel's style. This patch was partially done with the help of two tools: ./scripts/checkpatch.pl --fix-inplace --strict astyle --indent=tab=8 --style=linux But manually adjusted in order to fit our style. Signed-off-by: -
Mauro Carvalho Chehab authored
This is a new file, so the best moment to make it to follow Kernel coding style is now. This patch was partially generated with: ./scripts/checkpatch.pl --fix-inplace --strict -f drivers/media/usb/dvb-usb/cxusb-analog.c And manually checked and adjusted to avoid any warnings. Signed-off-by: -
Mauro Carvalho Chehab authored
Sparse complains about two issues when building with i386 and COMPILE_TEST: drivers/staging/media/allegro-dvt/allegro-core.c:1849:36: warning: constant 0xffffffff00000000UL is so big it is unsigned long long drivers/staging/media/allegro-dvt/allegro-core.c:865:24: error: incompatible types in comparison expression (different type sizes) Signed-off-by: -
Hans Verkuil authored
nal-h264.h is a local header, not a global one. Use "" instead of <>. Fixed this compile error: CC drivers/staging/media/allegro-dvt/nal-h264.o drivers/staging/media/allegro-dvt/nal-h264.c:24:10: fatal error: nal-h264.h: No such file or directory #include <nal-h264.h> ^~~~~~~~~~~~ Signed-off-by:Michael Tretter <m.tretter@pengutronix.de> Signed-off-by:
-
Hans Verkuil authored
In vb2_vmalloc_get_userptr() the framevector is created with the 'write' argument set to false when vb2_create_framevec() is called for OUTPUT buffers. So the pages are marked as read-only. However, userspace will write to these buffers since it will fill in the data to output. Since get_userptr is only called if the userptr of the queued buffer has changed since the last time that same buffer was queued, this will fail when the buffer contents is updated and the buffer is queued again. E.g., userspace fills buffer 1 with the output video and queues it. The first time get_userptr is called and the pages are grabbed and pinned in memory and marked read-only. The second time buffer 1 is filled with different video data and queued again. Since the userptr hasn't changed the get_userptr() callback isn't called again. Since the pages were marked as read-only the new contents isn't updated. Just always call vb2_create_framevec() with FOLL_WRITE to always allow writing to the buffers. Using USERPTR streaming with OUTPUT devices is almost never done. And when it is done it is via v4l2-compliance and a driver like vim2m. But since v4l2-compliance doesn't actually inspect the capture buffer and compare it to the original output buffer, this issue was never noticed. But the vicodec driver actually needs to parse the bitstream in the OUTPUT buffers and any errors there will be immediately noticed. So this time v4l2-compliance failed the USERPTR streaming test. Signed-off-by:
-
Michael Tretter authored
The allegro hardware encoder does not write SPS/PPS nal units into the encoded video stream. Therefore, we need to write the units in software. The implementation follows Rec. ITU-T H.264 (04/2017) to allow to convert between a C struct and the RBSP representation of the SPS and PPS nal units. The allegro driver writes the nal units into the v4l2 capture buffer in front of the actual video data which is written at an offset by the IP core. The remaining gap is filled with a filler nal unit. [hverkuil-cisco@xs4all.nl: added missing @dev description for nal_h264_read_sps()] [mchehab+samsung@kernel.org: removed uneeded "-ccflags-y $(src)" from Makefile] Signed-off-by:
-
Michael Tretter authored
Add a V4L2 mem-to-mem driver for Allegro DVT video IP cores as found in the EV family of the Xilinx ZynqMP SoC. The Zynq UltraScale+ Device Technical Reference Manual uses the term VCU (Video Codec Unit) for the encoder, decoder and system integration block. This driver takes care of interacting with the MicroBlaze MCU that controls the actual IP cores. The IP cores and MCU are integrated in the FPGA. The xlnx_vcu driver is responsible for configuring the clocks and providing information about the codec configuration. The driver currently only supports the H.264 video encoder. Signed-off-by:
-
Michael Tretter authored
Add vendor prefix for Allegro DVT, a provider of H.264/AVC, H.265/HEVC, AVS2, VP9 and AV1 compliance test suites and H.264/AVC, H.265/HEVC, and VP9 encoder, codec and decoder hardware (RTL) IPs. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Michael Tretter authored
Add device-tree bindings for the Allegro DVT video IP core found on the Xilinx ZynqMP EV family. Signed-off-by:
-
Hans Verkuil authored
last_buffer_dequeued was set to true in __fill_v4l2_buffer, but this is called for qbuf as well. Move it to vb2_dqbuf. Signed-off-by:
-
Maxime Ripard authored
Introduce some basic H264 decoding support in cedrus. So far, only the baseline profile videos have been tested, and some more advanced features used in higher profiles are not even implemented. Reviewed-by:
Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by:
-
Maxime Ripard authored
The H264_SLICE_RAW format introduced before is meant for stateless decoders that will need the H264 parsed slice data without the start code. Let's document it. Signed-off-by:
-
Maxime Ripard authored
The H264_SLICE_RAW format is meant to hold the parsed slice data without the start code. This will be needed by stateless decoders. Signed-off-by:
-
Pawel Osciak authored
Stateless video codecs will require both the H264 metadata and slices in order to be able to decode frames. This introduces the definitions for the structures used to pass the metadata from the userspace to the kernel. [hverkuil-cisco@xs4all.nl: add space after . in ".For"] [hverkuil-cisco@xs4all.nl: sync v4l2_ctrl_h264_decode_params struct layout with header] Co-developed-by:
Tomasz Figa <tfiga@chromium.org> Signed-off-by:
Pawel Osciak <posciak@chromium.org> Signed-off-by:
Guenter Roeck <groeck@chromium.org> Signed-off-by:
-
Jernej Skrabec authored
Some VPU variants may run at higher clock speeds. They actually need extra speed to be capable of decoding more complex codecs like HEVC or bigger image sizes (4K). Expand variant structure with mod_rate information. Signed-off-by:
-
Philipp Zabel authored
Use v4l2_m2m2_buf_copy_metadata to let BIT encoder contexts copy buffer field, timestamp, timestamp flags, and optionally timecode. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Philipp Zabel authored
coda_command_sync, coda_hw_reset, and __coda_start_decoding all expect to be called under the coda_mutex device lock. Signed-off-by:
-
Philipp Zabel authored
The MPEG-2 decoder firmware reports profile and level indication that can be used to set V4L2 MPEG-2 profile and level controls Signed-off-by:
-
Philipp Zabel authored
Add MPEG-2 CID definitions for profiles and levels defined in ITU-T Rec. H.262. Signed-off-by:
-
Philipp Zabel authored
The MPEG-4 decoder firmware reports profile and level indication values that can be used to update V4L2 MPEG-4 profile and level controls. Signed-off-by:
-
- 28 May, 2019 10 commits
-
-
Maciej S. Szmigiero authored
This adds raw (unprocessed) BT.656 stream capturing support for the analog part of Medion 95700. It can be enabled by setting CXUSB_EXTENDEDMODE_CAPTURE_RAW flag in parm.capture.extendedmode passed to VIDIOC_S_PARM. Signed-off-by:
Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by:
-
Maciej S. Szmigiero authored
This patch adds support for analog part of Medion 95700 in the cxusb driver. What works: * Video capture at various sizes with sequential fields, * Input switching (TV Tuner, Composite, S-Video), * TV and radio tuning, * Video standard switching and auto detection, * Radio mode switching (stereo / mono), * Unplugging while capturing, * DVB / analog coexistence. What does not work yet: * Audio, * VBI, * Picture controls. Signed-off-by:
-
Maciej S. Szmigiero authored
This patch prepares cxusb driver for supporting the analog part of Medion 95700 (previously only the digital - DVB - mode was supported). Specifically, it adds support for: * switching the device between analog and digital modes of operation, * enforcing that only one mode is active at the same time due to hardware limitations. Actual implementation of the analog mode will be provided by the next commit. Signed-off-by:
-
Maciej S. Szmigiero authored
According to V4L2 API set_fmt subdev operation should not return an error on out-of-range picture sizes, the values should be clamped instead to the supported range. The cx25840 datasheet says that the chip is capable of scaling down the picture width and height, respectively, 16 and 8 times. These values agree with what the old implementation enforced. Signed-off-by:
-
Maciej S. Szmigiero authored
This commit adds pin to pad mapping and output format configuration support in CX2584x-series chips to cx25840 driver. This functionality is then used to allow disabling ivtv-specific hacks and configuration values (called a "generic mode"), so cx25840 driver can be used for other devices not needing them without risking compatibility problems. Signed-off-by:
-
Maciej S. Szmigiero authored
This commit implements g_std operation in cx25840 driver by returning the last set video standard. Signed-off-by:
-
Maciej S. Szmigiero authored
cx25840 driver g_std operation queries the currently detected video signal, however this is what querystd operation should do, so let's rename the handler. None of the existing cx25840 driver users ever called the g_std operation, one of them calls querystd on each of its subdevs but then the result is only used to implement VIDIOC_QUERYSTD (as it should). Signed-off-by:
-
Maciej S. Szmigiero authored
cx25840_load_fw() does the same thing as cx25840_reset(), only keeps "is_initialized" flag so any further invocation of this function besides the first one is a NOP. Let's just call cx25840_reset() directly from cx25840_load_fw() instead of open coding it there. While we are at it, let's also improve comments about cx25840_load_fw() so they are current and in the proper style (one of them even referred to a non-existing cx25840 init operation). Signed-off-by:
-
Fabio Estevam authored
imx7_csi_enable() always return 0 and its return value is never checked, so convert it to void. Signed-off-by:
Fabio Estevam <festevam@gmail.com> Tested-by:
Rui Miguel Silva <rmfrfs@gmail.com> Reviewed-by:
-
Fabio Estevam authored
clk_prepare_enable() may fail, so we should better check its return value and propagate it in the case of error. Signed-off-by:
-
