Merge tag 'hwmon-for-linus-v4.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:
 "Two patches headed for -stable.

  nct7802: Fix integer overflow seen when writing voltage limits
  nct7904: Rename pwm attributes to match hwmon ABI"

* tag 'hwmon-for-linus-v4.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (nct7802) Fix integer overflow seen when writing voltage limits
  hwmon: (nct7904) Rename pwm attributes to match hwmon ABI

Writing a large value into a voltage limit attribute can result
in an overflow due to an auto-conversion from unsigned long to
unsigned int.

Cc: Constantine Shulyupin <const@MakeLinux.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Cc: stable@vger.kernel.org # v4.1+
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

pwm attributes have well defined names, which should be used.

Cc: Vadim V. Vlasov <vvlasov@dev.rtsoft.ru>
Cc: stable@vger.kernel.org #v4.1+
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Pull power management and ACPI fixes from Rafael Wysocki:
 "These fix three regressions, two recent ones (cpufreq core and ACPI
  device power management) and one introduced during the 4.1 cycle
  (intel_pstate).

  Specifics:

   - Fix a recently introduced issue in the cpufreq core causing it to
     attempt to create duplicate symbolic links to the policy directory
     in sysfs for CPUs that are offline when the cpufreq driver is being
     registered (Rafael J Wysocki)

   - Fix a recently introduced problem in the ACPI device power
     management core code causing it to store an incorrect value in the
     device object's power.state field in some cases which in turn leads
     to attempts to turn power resources off while they should still be
     on going forward (Mika Westerberg)

   - Fix an intel_pstate driver issue introduced during the 4.1 cycle
     which leads to kernel panics on boot on Knights Landing chips due
     to incomplete support for them in that driver (Lukasz Anaczkowski)"

* tag 'pm+acpi-4.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: Avoid attempts to create duplicate symbolic links
  ACPI / PM: Use target_state to set the device power state
  intel_pstate: Add get_scaling cpu_defaults param to Knights Landing

Pull device mapper fixes from Mike Snitzer:

 - fix DM thinp to consistently return -ENOSPC when out of data space

 - fix a logic bug in the DM cache smq policy's creation error path

 - revert a DM cache 4.2-rc3 change that reduced writeback efficiency

 - fix a hang on DM cache device destruction due to improper
   prealloc_used accounting introduced in 4.2-rc3

 - update URL for dm-crypt wiki page

* tag 'dm-4.2-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm cache: fix device destroy hang due to improper prealloc_used accounting
  Revert "dm cache: do not wake_worker() in free_migration()"
  dm crypt: update wiki page URL
  dm cache policy smq: fix alloc_bitset check that always evaluates as false
  dm thin: return -ENOSPC when erroring retry list due to out of data space

Commit 665022d7 ("dm cache: avoid calls to prealloc_free_structs() if
possible") introduced a regression that caused the removal of a DM cache
device to hang in cache_postsuspend()'s call to wait_for_migrations()
with the following stack trace:

  [<ffffffff81651457>] schedule+0x37/0x80
  [<ffffffffa041e21b>] cache_postsuspend+0xbb/0x470 [dm_cache]
  [<ffffffff810ba970>] ? prepare_to_wait_event+0xf0/0xf0
  [<ffffffffa0006f77>] dm_table_postsuspend_targets+0x47/0x60 [dm_mod]
  [<ffffffffa0001eb5>] __dm_destroy+0x215/0x250 [dm_mod]
  [<ffffffffa0004113>] dm_destroy+0x13/0x20 [dm_mod]
  [<ffffffffa00098cd>] dev_remove+0x10d/0x170 [dm_mod]
  [<ffffffffa00097c0>] ? dev_suspend+0x240/0x240 [dm_mod]
  [<ffffffffa0009f85>] ctl_ioctl+0x255/0x4d0 [dm_mod]
  [<ffffffff8127ac00>] ? SYSC_semtimedop+0x280/0xe10
  [<ffffffffa000a213>] dm_ctl_ioctl+0x13/0x20 [dm_mod]
  [<ffffffff811fd432>] do_vfs_ioctl+0x2d2/0x4b0
  [<ffffffff81117d5f>] ? __audit_syscall_entry+0xaf/0x100
  [<ffffffff81022636>] ? do_audit_syscall_entry+0x66/0x70
  [<ffffffff811fd689>] SyS_ioctl+0x79/0x90
  [<ffffffff81023e58>] ? syscall_trace_leave+0xb8/0x110
  [<ffffffff81654f6e>] entry_SYSCALL_64_fastpath+0x12/0x71

Fix this by accounting for the call to prealloc_data_structs()
immediately _before_ the call as opposed to after.  This is needed
because it is possible to break out of the control loop after the call
to prealloc_data_structs() but before prealloc_used was set to true.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

This reverts commit 386cb7cd.

Taking the wake_worker() out of free_migration() will slow writeback
dramatically, and hence adaptability.

Say we have 10k blocks that need writing back, but are only able to
issue 5 concurrently due to the migration bandwidth: it's imperative
that we wake_worker() immediately after migration completion; waiting
for the next 1 second wake up (via do_waker) means it'll take a long
time to write that all back.
Reported-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Pull s390 fixes from Martin Schwidefsky:
 "Two bug fixes:

   - fix a crash on pre-z10 hardware due to cache-info

   - fix an issue with classic BPF programs in the eBPF JIT"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/cachinfo: add missing facility check to init_cache_level()
  s390/bpf: clear correct BPF accumulator register

Pull VFIO fix from Alex Williamson:
 "Fix a lockdep reported deadlock in device open error path"

* tag 'vfio-v4.2-rc5' of git://github.com/awilliam/linux-vfio:
  vfio: Fix lockdep issue

Pull SCSI target fixes from Nicholas Bellinger:
 "This series is larger than what I'd normally be conformable with
  sending for a -rc5 PULL request..

  However, the bulk of the series is localized to qla2xxx target
  specific fixes that address a number of real-world correctness issues,
  that have been outstanding on the list for ~6 weeks now.  They where
  submitted + verified + acked by the HW LLD vendor, contributed by a
  major production customer of the code, and are marked for v3.18.y
  stable code.

  That said, I don't see a good reason to wait another month to get
  these fixes into mainline.

  Beyond the qla2xx specific fixes, this series also includes:

   - bugfix for a long standing use-after-free in iscsi-target during
     TPG shutdown + demo-mode sessions.

   - bugfix for a >= v4.0 regression OOPs in iscsi-target during a
     iscsi_start_kthreads() failure.

   - bugfix for a >= v4.0 regression hang in iscsi-target for iser
     explicit session/connection logout.

   - bugfix for a iser-target bug where a early CMA REJECTED status
     during login triggers a NULL pointer dereference OOPs.

   - bugfixes for a handful of v4.2-rc1 specific regressions related to
     the larger set of recent backend configfs attribute changes.

  A big thanks to QLogic + Pure Storage for the qla2xxx target bugfixes"

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (28 commits)
  Documentation/target: Fix tcm_mod_builder.py build breakage
  iser-target: Fix REJECT CM event use-after-free OOPs
  iscsi-target: Fix iser explicit logout TX kthread leak
  iscsi-target: Fix iscsit_start_kthreads failure OOPs
  iscsi-target: Fix use-after-free during TPG session shutdown
  qla2xxx: terminate exchange when command is aborted by LIO
  qla2xxx: drop cmds/tmrs arrived while session is being deleted
  qla2xxx: disable scsi_transport_fc registration in target mode
  qla2xxx: added sess generations to detect RSCN update races
  qla2xxx: Abort stale cmds on qla_tgt_wq when plogi arrives
  qla2xxx: delay plogi/prli ack until existing sessions are deleted
  qla2xxx: cleanup cmd in qla workqueue before processing TMR
  qla2xxx: kill sessions/log out initiator on RSCN and port down events
  qla2xxx: fix command initialization in target mode.
  qla2xxx: Remove msleep in qlt_send_term_exchange
  qla2xxx: adjust debug flags
  qla2xxx: release request queue reservation.
  qla2xxx: Add flush after updating ATIOQ consumer index.
  qla2xxx: Enable target mode for ISP27XX
  qla2xxx: Fix hardware lock/unlock issue causing kernel panic.
  ...

* pm-cpufreq:
  cpufreq: Avoid attempts to create duplicate symbolic links
  intel_pstate: Add get_scaling cpu_defaults param to Knights Landing

* acpi-pm:
  ACPI / PM: Use target_state to set the device power state

Pull rdma fixes from Doug Ledford:

 - two minor bug fixes

 - relicense ocrdma driver to dual license, GPL or BSD

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
  RDMA/ocrdma: update ocrdma module license string
  RDMA/ocrdma: update ocrdma license to dual-license
  IB/ipoib: Fix CONFIG_INFINIBAND_IPOIB_CM
  RDMA/cxgb3: fail get_dma_mr on 64 bit arches

Pull key fix from James Morris.

Fix memory leak.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  KEYS: ensure we free the assoc array edit if edit is valid

Pull arm64 fix from Catalin Marinas:
 "Fix buffer overflow when UTF-16 UEFI vendor string is copied from the
  system table into a char array with a size of 100 bytes"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64/efi: map the entire UEFI vendor string before reading it

Pull AVR32 fix from Hans-Christian Egtvedt.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32:
  avr32: handle NULL as a valid clock object

Pull devicetree fixes from Rob Herring:
 "A handful of DT related fixes for 4.2-rc"

* tag 'devicetree-fixes-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  of: Drop owner assignment from platform and i2c driver
  DEVICETREE: Misc fix for the AR7100 SPI controller binding
  of: constify drv arg of of_driver_match_device stub
  of: add HAS_IOMEM depends to OF_ADDRESS

Pull vhost fixes from Michael Tsirkin:
 "Two bugfixes only here"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vhost: fix error handling for memory region alloc
  vhost: actually track log eventfd file

Merge tag 'linux-kselftest-4.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fix from Shuah Khan.

* tag 'linux-kselftest-4.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/futex: Fix futex_cmp_requeue_pi() error handling

Pull NFS client bugfixes from Trond Myklebust:
 "Highlights include:

  Stable patches:
   - Fix a situation where the client uses the wrong (zero) stateid.
   - Fix a memory leak in nfs_do_recoalesce

  Bugfixes:
   - Plug a memory leak when ->prepare_layoutcommit fails
   - Fix an Oops in the NFSv4 open code
   - Fix a backchannel deadlock
   - Fix a livelock in sunrpc when sendmsg fails due to low memory
     availability
   - Don't revalidate the mapping if both size and change attr are up to
     date
   - Ensure we don't miss a file extension when doing pNFS
   - Several fixes to handle NFSv4.1 sequence operation status bits
     correctly
   - Several pNFS layout return bugfixes"

* tag 'nfs-for-4.2-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (28 commits)
  nfs: Fix an oops caused by using other thread's stack space in ASYNC mode
  nfs: plug memory leak when ->prepare_layoutcommit fails
  SUNRPC: Report TCP errors to the caller
  sunrpc: translate -EAGAIN to -ENOBUFS when socket is writable.
  NFSv4.2: handle NFS-specific llseek errors
  NFS: Don't clear desc->pg_moreio in nfs_do_recoalesce()
  NFS: Fix a memory leak in nfs_do_recoalesce
  NFS: nfs_mark_for_revalidate should always set NFS_INO_REVAL_PAGECACHE
  NFS: Remove the "NFS_CAP_CHANGE_ATTR" capability
  NFS: Set NFS_INO_REVAL_PAGECACHE if the change attribute is uninitialised
  NFS: Don't revalidate the mapping if both size and change attr are up to date
  NFSv4/pnfs: Ensure we don't miss a file extension
  NFSv4: We must set NFS_OPEN_STATE flag in nfs_resync_open_stateid_locked
  SUNRPC: xprt_complete_bc_request must also decrement the free slot count
  SUNRPC: Fix a backchannel deadlock
  pNFS: Don't throw out valid layout segments
  pNFS: pnfs_roc_drain() fix a race with open
  pNFS: Fix races between return-on-close and layoutreturn.
  pNFS: pnfs_roc_drain should return 'true' when sleeping
  pNFS: Layoutreturn must invalidate all existing layout segments.
  ...

Pull f2fs fixes from Jaegeuk Kim.

* tag 'for-f2fs-v4.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
  f2fs: call set_page_dirty to attach i_wb for cgroup
  f2fs: handle error cases in move_encrypted_block

After commit 87549141 (cpufreq: Stop migrating sysfs files on
hotplug) there is a problem with CPUs that share cpufreq policy
objects with other CPUs and are initially offline.

Say CPU1 shares a policy with CPU0 which is online and is registered
first.  As part of the registration process, cpufreq_add_dev() is
called for it.  It creates the policy object and a symbolic link
to it from the CPU1's sysfs directory.  If CPU1 is registered
subsequently and it is offline at that time, cpufreq_add_dev() will
attempt to create a symbolic link to the policy object for it, but
that link is present already, so a warning about that will be
triggered.

To avoid that warning, make cpufreq use an additional CPU mask
containing related CPUs that are actually present for each policy
object.  That mask is initialized when the policy object is populated
after its creation (for the first online CPU using it) and it includes
CPUs from the "policy CPUs" mask returned by the cpufreq driver's
->init() callback that are physically present at that time.  Symbolic
links to the policy are created only for the CPUs in that mask.

If cpufreq_add_dev() is invoked for an offline CPU, it checks the
new mask and only creates the symlink if the CPU was not in it (the
CPU is added to the mask at the same time).

In turn, cpufreq_remove_dev() drops the given CPU from the new mask,
removes its symlink to the policy object and returns, unless it is
the CPU owning the policy object.  In that case, the policy object
is moved to a new CPU's sysfs directory or deleted if the CPU being
removed was the last user of the policy.

While at it, notice that cpufreq_remove_dev() can't fail, because
its return value is ignored, so make it ignore return values from
__cpufreq_remove_dev_prepare() and __cpufreq_remove_dev_finish()
and prevent these functions from aborting on errors returned by
__cpufreq_governor().  Also drop the now unused sif argument from
them.

Fixes: 87549141 (cpufreq: Stop migrating sysfs files on hotplug)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reported-and-tested-by: Russell King <linux@arm.linux.org.uk>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

Commit 20dacb71 ("ACPI / PM: Rework device power management to follow
ACPI 6") changed the device power management to use D3hot if the device
in question does not have _PR3 method even if D3cold was requested by the
caller.

However, if the device has _PR3 device->power.state is also set to D3hot
instead of D3Cold after power resources have been turned off because
device->power.state will be assigned from "state" instead of
"target_state".

Next time the device is transitioned to D0, acpi_power_transition() will
find that the current power state of the device is D3hot instead of D3cold
which causes it to power down all resources required for the current
(wrong) state D3hot.

Below is a simplified ASL example of a real touch panel device which
triggers the problem:

  Scope (TPL1)
  {
      Name (_PR0, Package (1) { \_SB.PCI0.I2C1.PXTC })
      Name (_PR3, Package (1) { \_SB.PCI0.I2C1.PXTC })
      ...
  }

In both D0 and D3hot the same power resource is required. However, when
acpi_power_transition() turns off power resources required for D3hot (as
the device is transitioned to D0) it powers down PXTC which then makes the
device to lose its power.

Fix this by assigning "target_state" to the device power state instead of
"state" that is always D3hot even for devices with valid _PR3.

Fixes: 20dacb71 (ACPI / PM: Rework device power management to follow ACPI 6)
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

An oops caused by using other thread's stack space in sunrpc ASYNC sending thread.

[ 9839.007187] ------------[ cut here ]------------
[ 9839.007923] kernel BUG at fs/nfs/nfs4xdr.c:910!
[ 9839.008069] invalid opcode: 0000 [#1] SMP
[ 9839.008069] Modules linked in: blocklayoutdriver rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache snd_hda_codec_generic snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep snd_seq snd_seq_device snd_pcm joydev iosf_mbi crct10dif_pclmul snd_timer crc32_pclmul crc32c_intel ghash_clmulni_intel snd soundcore ppdev pvpanic parport_pc i2c_piix4 serio_raw virtio_balloon parport acpi_cpufreq nfsd nfs_acl lockd grace auth_rpcgss sunrpc qxl drm_kms_helper virtio_net virtio_console virtio_blk ttm drm virtio_pci virtio_ring virtio ata_generic pata_acpi
[ 9839.008069] CPU: 0 PID: 308 Comm: kworker/0:1H Not tainted 4.0.0-0.rc4.git1.3.fc23.x86_64 #1
[ 9839.008069] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 9839.008069] Workqueue: rpciod rpc_async_schedule [sunrpc]
[ 9839.008069] task: ffff8800d8b4d8e0 ti: ffff880036678000 task.ti: ffff880036678000
[ 9839.008069] RIP: 0010:[<ffffffffa0339cc9>]  [<ffffffffa0339cc9>] reserve_space.part.73+0x9/0x10 [nfsv4]
[ 9839.008069] RSP: 0018:ffff88003667ba58  EFLAGS: 00010246
[ 9839.008069] RAX: 0000000000000000 RBX: 000000001fc15e18 RCX: ffff8800c0193800
[ 9839.008069] RDX: ffff8800e4ae3f24 RSI: 000000001fc15e2c RDI: ffff88003667bcd0
[ 9839.008069] RBP: ffff88003667ba58 R08: ffff8800d9173008 R09: 0000000000000003
[ 9839.008069] R10: ffff88003667bcd0 R11: 000000000000000c R12: 0000000000010000
[ 9839.008069] R13: ffff8800d9173350 R14: 0000000000000000 R15: ffff8800c0067b98
[ 9839.008069] FS:  0000000000000000(0000) GS:ffff88011fc00000(0000) knlGS:0000000000000000
[ 9839.008069] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 9839.008069] CR2: 00007f988c9c8bb0 CR3: 00000000d99b6000 CR4: 00000000000407f0
[ 9839.008069] Stack:
[ 9839.008069]  ffff88003667bbc8 ffffffffa03412c5 00000000c6c55680 ffff880000000003
[ 9839.008069]  0000000000000088 00000010c6c55680 0001000000000002 ffffffff816e87e9
[ 9839.008069]  0000000000000000 00000000477290e2 ffff88003667bab8 ffffffff81327ba3
[ 9839.008069] Call Trace:
[ 9839.008069]  [<ffffffffa03412c5>] encode_attrs+0x435/0x530 [nfsv4]
[ 9839.008069]  [<ffffffff816e87e9>] ? inet_sendmsg+0x69/0xb0
[ 9839.008069]  [<ffffffff81327ba3>] ? selinux_socket_sendmsg+0x23/0x30
[ 9839.008069]  [<ffffffff8164c1df>] ? do_sock_sendmsg+0x9f/0xc0
[ 9839.008069]  [<ffffffff8164c278>] ? kernel_sendmsg+0x58/0x70
[ 9839.008069]  [<ffffffffa011acc0>] ? xdr_reserve_space+0x20/0x170 [sunrpc]
[ 9839.008069]  [<ffffffffa011acc0>] ? xdr_reserve_space+0x20/0x170 [sunrpc]
[ 9839.008069]  [<ffffffffa0341b40>] ? nfs4_xdr_enc_open_noattr+0x130/0x130 [nfsv4]
[ 9839.008069]  [<ffffffffa03419a5>] encode_open+0x2d5/0x340 [nfsv4]
[ 9839.008069]  [<ffffffffa0341b40>] ? nfs4_xdr_enc_open_noattr+0x130/0x130 [nfsv4]
[ 9839.008069]  [<ffffffffa011ab89>] ? xdr_encode_opaque+0x19/0x20 [sunrpc]
[ 9839.008069]  [<ffffffffa0339cfb>] ? encode_string+0x2b/0x40 [nfsv4]
[ 9839.008069]  [<ffffffffa0341bf3>] nfs4_xdr_enc_open+0xb3/0x140 [nfsv4]
[ 9839.008069]  [<ffffffffa0110a4c>] rpcauth_wrap_req+0xac/0xf0 [sunrpc]
[ 9839.008069]  [<ffffffffa01017db>] call_transmit+0x18b/0x2d0 [sunrpc]
[ 9839.008069]  [<ffffffffa0101650>] ? call_decode+0x860/0x860 [sunrpc]
[ 9839.008069]  [<ffffffffa0101650>] ? call_decode+0x860/0x860 [sunrpc]
[ 9839.008069]  [<ffffffffa010caa0>] __rpc_execute+0x90/0x460 [sunrpc]
[ 9839.008069]  [<ffffffffa010ce85>] rpc_async_schedule+0x15/0x20 [sunrpc]
[ 9839.008069]  [<ffffffff810b452b>] process_one_work+0x1bb/0x410
[ 9839.008069]  [<ffffffff810b47d3>] worker_thread+0x53/0x470
[ 9839.008069]  [<ffffffff810b4780>] ? process_one_work+0x410/0x410
[ 9839.008069]  [<ffffffff810b4780>] ? process_one_work+0x410/0x410
[ 9839.008069]  [<ffffffff810ba7b8>] kthread+0xd8/0xf0
[ 9839.008069]  [<ffffffff810ba6e0>] ? kthread_worker_fn+0x180/0x180
[ 9839.008069]  [<ffffffff81786418>] ret_from_fork+0x58/0x90
[ 9839.008069]  [<ffffffff810ba6e0>] ? kthread_worker_fn+0x180/0x180
[ 9839.008069] Code: 00 00 48 c7 c7 21 fa 37 a0 e8 94 1c d6 e0 c6 05 d2 17 05 00 01 8b 03 eb d7 66 0f 1f 84 00 00 00 00 00 66 66 66 66 90 55 48 89 e5 <0f> 0b 0f 1f 44 00 00 66 66 66 66 90 55 48 89 e5 41 54 53 89 f3
[ 9839.008069] RIP  [<ffffffffa0339cc9>] reserve_space.part.73+0x9/0x10 [nfsv4]
[ 9839.008069]  RSP <ffff88003667ba58>
[ 9839.071114] ---[ end trace cc14c03adb522e94 ]---
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

"data" is currently leaked when the prepare_layoutcommit operation
returns an error. Put the cred before taking the spinlock in that
case, take the lock and then goto out_unlock which will drop the
lock and then free "data".
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Stephen Powell reported the following crash on a z890 machine:

Kernel BUG at 00000000001219d0 [verbose debug info unavailable]
illegal operation: 0001 ilc:3 [#1] SMP
Krnl PSW : 0704e00180000000 00000000001219d0 (init_cache_level+0x38/0xe0)
	   R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 EA:3
Krnl Code: 00000000001219c2: a7840056		brc	8,121a6e
	   00000000001219c6: a7190000		lghi	%r1,0
	  #00000000001219ca: eb101000004c	ecag	%r1,%r0,0(%r1)
	  >00000000001219d0: a7390000		lghi	%r3,0
	   00000000001219d4: e310f0a00024	stg	%r1,160(%r15)
	   00000000001219da: a7080000		lhi	%r0,0
	   00000000001219de: a7b9f000		lghi	%r11,-4096
	   00000000001219e2: c0a0002899d9	larl	%r10,634d94
Call Trace:
 [<0000000000478ee2>] detect_cache_attributes+0x2a/0x2b8
 [<000000000097c9b0>] cacheinfo_sysfs_init+0x60/0xc8
 [<00000000001001c0>] do_one_initcall+0x98/0x1c8
 [<000000000094fdc2>] kernel_init_freeable+0x212/0x2d8
 [<000000000062352e>] kernel_init+0x26/0x118
 [<000000000062fd2e>] kernel_thread_starter+0x6/0xc

The illegal operation was executed because of a missing facility check,
which should have made sure that the ECAG execution would only be executed
on machines which have the general-instructions-extension facility
installed.
Reported-and-tested-by: Stephen Powell <zlinuxman@wowway.com>
Cc: stable@vger.kernel.org # v4.0+
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

__key_link_end is not freeing the associated array edit structure
and this leads to a 512 byte memory leak each time an identical
existing key is added with add_key().

The reason the add_key() system call returns okay is that
key_create_or_update() calls __key_link_begin() before checking to see
whether it can update a key directly rather than adding/replacing - which
it turns out it can.  Thus __key_link() is not called through
__key_instantiate_and_link() and __key_link_end() must cancel the edit.

CVE-2015-1333
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

At boot, the UTF-16 UEFI vendor string is copied from the system
table into a char array with a size of 100 bytes. However, this
size of 100 bytes is also used for memremapping() the source,
which may not be sufficient if the vendor string exceeds 50
UTF-16 characters, and the placement of the vendor string inside
a 4 KB page happens to leave the end unmapped.

So use the correct '100 * sizeof(efi_char16_t)' for the size of
the mapping.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Fixes: f84d0275 ("arm64: add EFI runtime services")
Cc: <stable@vger.kernel.org> # 3.16+
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

The networking layer does not reliably report the distinction between
a non-block write failing because:
 1/ the queue is too full already and
 2/ a memory allocation attempt failed.

The distinction is important because in the first case it is
appropriate to retry as soon as the socket reports that it is
writable, and in the second case a small delay is required as the
socket will most likely report as writable but kmalloc could still
fail.

sk_stream_wait_memory() exhibits this distinction nicely, setting
'vm_wait' if a small wait is needed.  However in the non-blocking case
it always returns -EAGAIN no matter the cause of the failure.  This
-EAGAIN call get all the way to sunrpc.

The sunrpc layer expects EAGAIN to indicate the first cause, and
ENOBUFS to indicate the second.  Various documentation suggests that
this is not unreasonable, but does not guarantee the desired error
codes.

The result of getting -EAGAIN when -ENOBUFS is expected is that the
send is tried again in a tight loop and soft lockups are reported.

so: add tests after calls to xs_sendpages() to translate -EAGAIN into
-ENOBUFS if the socket is writable.  This cannot happen inside
xs_sendpages() as the test for "is socket writable" is different
between TCP and UDP.

With this change, the tight loop retrying xs_sendpages() becomes a
loop which only retries every 250ms, and so will not trigger a
soft-lockup warning.

It is possible that the write did fail because the queue was too full
and by the time xs_sendpages() completed, the queue was writable
again.  In this case an extra 250ms delay is inserted that isn't
really needed.  This circumstance suggests a degree of congestion so a
delay is not necessarily a bad thing, and it can only cause a single
250ms delay, not a series of them.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Handle NFS-specific llseek errors instead of letting them leak out to
userspace.
Reported-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

callers of vhost_kvzalloc() expect the same behaviour on
allocation error as from kmalloc/vmalloc i.e. NULL return
value. So just return vzmalloc() returned value instead of
returning ERR_PTR(-ENOMEM)

Fixes: 4de7255f ("vhost: extend memory regions allocation to vmalloc")
Spotted-by: Dan Carpenter <dan.carpenter@oracle.com>
Suggested-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

While reviewing vhost log code, I found out that log_file is never
set. Note: I haven't tested the change (QEMU doesn't use LOG_FD yet).

Cc: stable@vger.kernel.org
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Recoalescing does not affect whether or not we've already sent off
I/O, and doing so means that we end up sending a bunch of synchronous
for cases where we actually need to be using unstable writes.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

If the function exits early, then we must put those requests that were
not processed back onto the &mirror->pg_list so they can be cleaned up
by nfs_pgio_error().

Fixes: a7d42ddb ("nfs: add mirroring support to pgio layer")
Cc: stable@vger.kernel.org # v4.0+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

platform_driver and i2c_driver do not need to set an owner because core
will set it.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Fix the clocks property documentation and use lower case for
hex values in the example.
Signed-off-by: Alban Bedel <albeu@free.fr>
Signed-off-by: Rob Herring <robh@kernel.org>

With this change the stub has the same signature as the actual function,
preventing this compiler warning when building without CONFIG_OF:

   drivers/base/property.c: In function 'fwnode_driver_match_device':
>> drivers/base/property.c:608:38: warning: passing argument 2 of 'of_driver_match_device' discards 'const' qualifier from pointer target type
      return of_driver_match_device(dev, drv);
                                         ^
   In file included from drivers/base/property.c:18:0:
   include/linux/of_device.h:61:19: note: expected 'struct device_driver *' but argument is of type 'const struct device_driver *'
    static inline int of_driver_match_device(struct device *dev,
                      ^
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>

On UML builds, of_address.c fails to compile:

../drivers/of/address.c:873:2: error: implicit declaration of function ‘ioremap’ [-Werror=implicit-function-declaration]

This is due to CONFIG_OF now being user selectable. Add a dependency on
HAS_IOMEM to OF_ADDRESS in order to fix this.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Grant Likely <grant.likely@linaro.org>

Cryptsetup moved to gitlab.  This is a leftover from commit e44f23b3
(dm crypt: update URLs to new cryptsetup project page, 2015-04-05).
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

static analysis by cppcheck has found a check on alloc_bitset that
always evaluates as false and hence never finds an allocation failure:

[drivers/md/dm-cache-policy-smq.c:1689]: (warning) Logical conjunction
  always evaluates to false: !EXPR && EXPR.

Fix this by removing the incorrect mq->cache_hit_bits check
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>