An error occurred fetching the project authors.
- 01 May, 2020 28 commits
-
-
Fugang Duan authored
This reverts commit 29ae6bd1. The commit breaks ethernet function on i.MX6SX, i.MX7D, i.MX8MM, i.MX8MQ, and i.MX8QXP platforms. Boot yocto system by NFS mounting rootfs will be failed with the commit. Signed-off-by:
Fugang Duan <fugang.duan@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wei Yongjun authored
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: b7370112 ("lpc32xx: Added ethernet driver") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Acked-by:
Vladimir Zapolskiy <vz@mleia.com> Signed-off-by:
-
Wei Yongjun authored
Fix to return a error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 31ad4e4e ("ice: Allocate flow profile") Signed-off-by:
-
Wei Yongjun authored
Fix to return negative error code -ENOMEM from the error handling case instead of 0, as done elsewhere in this function. Fixes: 5a6d7c9d ("octeontx2-pf: Mailbox communication with AF") Signed-off-by:
-
Aishwarya Ramakrishnan authored
Fixes coccicheck warning: ./drivers/net/ethernet/freescale/dpaa/dpaa_eth.c:2110:30-31: WARNING comparing pointer to 0 Avoid pointer type value compared to 0. Signed-off-by:
Aishwarya Ramakrishnan <aishwaryarj100@gmail.com> Signed-off-by:
-
Yangbo Lu authored
Output PPS signal on FIPER2 (Fixed Period Interval Pulse) in default which is more desired by user. Signed-off-by:
Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by:
-
David S. Miller authored
Johannes Berg says: ==================== netlink validation improvements/refactoring Alright, this is the resend now, really just changing - the WARN_ON_ONCE() as spotted by Jakub; - mark the export patch no longer RFC. I wasn't actually sure if you meant this one too, and I really should dig out and polish the code that showed it in userspace. ==================== Signed-off-by: -
Johannes Berg authored
Add, and use in generic netlink, helpers to dump out a netlink policy to userspace, including all the range validation data, nested policies etc. This lets userspace discover what the kernel understands. For families/commands other than generic netlink, the helpers need to be used directly in an appropriate command, or we can add some infrastructure (a new netlink family) that those can register their policies with for introspection. I'm not that familiar with non-generic netlink, so that's left out for now. The data exposed to userspace also includes min and max length for binary/string data, I've done that instead of letting the userspace tools figure out whether min/max is intended based on the type so that we can extend this later in the kernel, we might want to just use the range data for example. Because of this, I opted to not directly expose the NLA_* values, even if some of them are already exposed via BPF, as with min/max length we don't need to have different types here for NLA_BINARY/NLA_MIN_LEN/NLA_EXACT_LEN, we just make them all NL_ATTR_TYPE_BINARY with min/max length optionally set. Similarly, we don't really need NLA_MSECS, and perhaps can remove it in the future - but not if we encode it into the userspace API now. It gets mapped to NL_ATTR_TYPE_U64 here. Note that the exposing here corresponds to the strict policy interpretation, and NLA_UNSPEC items are omitted entirely. To get those, change them to NLA_MIN_LEN which behaves in exactly the same way, but is exposed. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Johannes Berg authored
Add helpers to get the policy's signed/unsigned range validation data. Signed-off-by:
-
Johannes Berg authored
Use a validation type instead, so we can later expose the NLA_* values to userspace for policy descriptions. Some transformations were done with this spatch: @@ identifier p; expression X, L, A; @@ struct nla_policy p[X] = { [A] = -{ .type = NLA_EXACT_LEN_WARN, .len = L }, +NLA_POLICY_EXACT_LEN_WARN(L), ... }; Signed-off-by: -
Johannes Berg authored
Since NLA_MSECS is really equivalent to NLA_U64, allow it to have range validation as well. Signed-off-by:
-
Johannes Berg authored
Using a pointer to a struct indicating the min/max values, extend the ability to do range validation for arbitrary values. Small values in the s16 range can be kept in the policy directly. Signed-off-by:
-
Johannes Berg authored
Now that we have limited recursive policy validation to avoid stack overflows, change nl80211 to actually link the nested policy (linking back to itself eventually), which allows some code cleanups. Signed-off-by:
-
Johannes Berg authored
Now that we have nested policies, we can theoretically recurse forever parsing attributes if a (sub-)policy refers back to a higher level one. This is a situation that has happened in nl80211, and we've avoided it there by not linking it. Add some code to netlink parsing to limit recursion depth. Signed-off-by:
-
Johannes Berg authored
In the netlink policy, we currently have a void *validation_data that's pointing to different things: * a u32 value for bitfield32, * the netlink policy for nested/nested array * the string for NLA_REJECT Remove the pointer and place appropriate type-safe items in the union instead. While at it, completely dissolve the pointer for the bitfield32 case and just put the value there directly. Signed-off-by:
-
David S. Miller authored
Florian Fainelli says: ==================== net: dsa: b53: ARL improvements This patch series improves the b53 driver ARL search code by renaming the ARL entries to be reflective of what they are: bins, and then introduce the number of buckets so we can properly bound check ARL searches. The final patch removes an unused argument. ==================== Signed-off-by: -
Florian Fainelli authored
This argument is not used. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Florian Fainelli authored
ARL searches are done by reading two ARL entries at a time, do not cap the search at 1024 which would only limit us to half of the possible ARL capacity, but use b53_max_arl_entries() instead which does the right multiplication between bins and indexes. Signed-off-by:
-
Florian Fainelli authored
In preparation for doing proper upper bound checking of FDB/MDB entries being added to the ARL, provide the number of ARL buckets for each switch chip we support. All chips have 1024 buckets, except 7278 which has only 256. Signed-off-by:
-
Florian Fainelli authored
The variable currently holds the number of ARL bins per ARL buckets, which is different from the number of ARL entries which would be bins times buckets. We will be adding a num_arl_buckets in a subsequent patch so get variables straight now. Signed-off-by:
-
David S. Miller authored
Heiner Kallweit says: ==================== r8169: refactor and improve interrupt coalescing Refactor and improve interrupt coalescing. ==================== Reviewed-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Heiner Kallweit authored
Realtek provided information about a HW constraint that time limit must not be set to 0 if the frame limit is >0. Add a check for this and reject invalid parameter combinations. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Heiner Kallweit authored
Use FIELD_PREP() to make the code better readable, and avoid the loop. No functional change intended. Signed-off-by:
-
Heiner Kallweit authored
The chip supports only frame limits 0, 4, 8, .. 60 internally. Returning EINVAL for all val % 4 != 0 seems to be a little bit too unfriendly to the user. Therefore round up the frame limit to the next supported value. In addition round up the time limit, else a very low limit could be rounded down to 0, and interpreted as "ignore value" by the chip. Signed-off-by:
-
Heiner Kallweit authored
The time limit provided by userspace is multiplied with 1000, what could result in an overflow. Therefore change the time limit parameter unit from ns to us, and avoid the problematic operation. If there's no matching scale because provided time limit is too big, return ERANGE instead of EINVAL to provide a hint to the user what's wrong. Signed-off-by:
-
Heiner Kallweit authored
Use FIELD_GET() macro to make the code better readable. In addition change the logic to round the time limit up, not down. Reason is that a time limit <1us would be rounded to 0 currently, what would be interpreted as "no time limit set". Signed-off-by:
-
Heiner Kallweit authored
Rx and tx scale are the same always. Simplify the code by using one scale for rx and tx only. Signed-off-by:
-
Heiner Kallweit authored
The net_device argument is just used to get a struct rtl8169_private pointer via netdev_priv(). Therefore pass the struct rtl8169_private pointer directly. Signed-off-by:
-
- 30 Apr, 2020 12 commits
-
-
Taehee Yoo authored
When all hsr slave interfaces are removed, hsr interface doesn't work. At that moment, it's fine to remove an unused hsr interface automatically for saving resources. That's a common behavior of virtual interfaces. Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
-
David S. Miller authored
Eric Dumazet says: ==================== tcp: sack compression changes Patch series refines SACK compression. We had issues with missing SACK when TCP option space is tight. Uses hrtimer slack to improve performance. ==================== Signed-off-by: -
Eric Dumazet authored
Add a sysctl to control hrtimer slack, default of 100 usec. This gives the opportunity to reduce system overhead, and help very short RTT flows. Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
Eric Dumazet authored
Currently, tcp_sack_new_ofo_skb() sends an ack if prior acks were 'compressed', if room has to be made in tp->selective_acks[] But there is no guarantee all four sack ranges can be included in SACK option. As a matter of fact, when TCP timestamps option is used, only three SACK ranges can be included. Lets assume only two ranges can be included, and force the ack: - When we touch more than 2 ranges in the reordering done if tcp_sack_extend() could be done. - If we have at least 2 ranges when adding a new one. This enforces that before a range is in third or fourth position, at least one ACK packet included it in first/second position. Signed-off-by:
-
Eric Dumazet authored
In commit 86de5921 ("tcp: defer SACK compression after DupThresh") I added a TCP_FASTRETRANS_THRESH bias to tp->compressed_ack in order to enable sack compression only after 3 dupacks. Since we plan to relax this rule for flows that involve stacks not requiring this old rule, this patch adds a distinct tp->dup_ack_counter. This means the TCP_FASTRETRANS_THRESH value is now used in a single location that a future patch can adjust: if (tp->dup_ack_counter < TCP_FASTRETRANS_THRESH) { tp->dup_ack_counter++; goto send_now; } This patch also introduces tcp_sack_compress_send_ack() helper to ease following patch comprehension. This patch refines LINUX_MIB_TCPACKCOMPRESSED to not count the acks that we had to send if the timer expires or tcp_sack_compress_send_ack() is sending an ack. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5-updates-2020-04-30 1) Add release all pages support, From Eran. to release all FW pages at once on driver unload, when supported by FW. 2) From Maxim and Tariq, Trivial Data path cleanup and code improvements in preparation for their next features, TLS offload and TX performance improvements 3) Multiple cleanups. ==================== Signed-off-by: -
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Prepare SPAN API for upcoming changes Switched port analyzer (SPAN) is used for packet mirroring. Over mlxsw this is achieved by attaching tc-mirred action to either matchall or flower classifier. The current API used to configure SPAN consists of two functions: mlxsw_sp_span_mirror_add() and mlxsw_sp_span_mirror_del(). These two functions pack a lot of different operations: * SPAN agent configuration: Determining the egress port and optional headers that need to encapsulate the mirrored packet (when mirroring to a gretap, for example) * Egress mirror buffer configuration: Allocating / freeing a buffer when port is analyzed (inspected) at egress * SPAN agent binding: Binding the SPAN agent to a trigger, if any. The current triggers are incoming / outgoing packet and they are only used for matchall-based mirroring This non-modular design makes it difficult to extend the API for future changes, such as new mirror targets (CPU) and new global triggers (early dropped packets, for example). Therefore, this patch set gradually adds APIs for above mentioned operations and then converts the two existing users to use it instead of the old API. No functional changes intended. Tested with existing mirroring selftests. Patch set overview: Patches #1-#5 gradually add the new API Patches #6-#8 convert existing users to use the new API Patch #9 removes the old API ==================== Signed-off-by: -
Ido Schimmel authored
Remove the old SPAN API now that matchall-based and flower-based mirroring were converted to use the new API. Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Ido Schimmel authored
As previously explained, each port whose outgoing traffic is analyzed needs to have an egress mirror buffer. The size of the egress mirror buffer is calculated based on various parameters, two of which are the speed and the MTU of the port. Therefore, when the MTU or the speed of a port change, the SPAN code is called to see if the egress mirror buffer of the port needs to be adjusted. Currently, this is done by traversing all the SPAN agents and for each SPAN agent the list of bound ports is traversed. Instead of the above, traverse the recently added list of analyzed ports. This will later allow us to remove the old SPAN API. Signed-off-by:
-
Ido Schimmel authored
In flower-based mirroring, mirroring is done with ACLs and the SPAN agent is not bound to a port. Instead its identifier is specified in an ACL action. Convert this type of mirroring to use the new API. Signed-off-by:
-
Ido Schimmel authored
In matchall-based mirroring, mirroring is not done with ACLs, but a SPAN agent is bound to the ingress / egress of a port and all incoming / outgoing traffic is mirrored. Convert this type of mirroring to use the new API. First the SPAN agent is resolved, then the port is marked as analyzed and its egress mirror buffer is potentially allocated. Lastly, the binding is performed. Signed-off-by:
-
Ido Schimmel authored
Currently, a SPAN agent can only be bound to a per-port trigger where the trigger is either an incoming packet (INGRESS) or an outgoing packet (EGRESS) to / from the port. A follow-up patch set will introduce the concept of global triggers and per-{port, TC} enablement. With global triggers, the trigger entry is only keyed by a trigger and not by a port and a trigger. The trigger can be, for example, a packet that was early dropped. While the binding between the SPAN agent and the trigger is performed only once, the trigger entry needs to be reference counted, as the trigger can be enabled on multiple ports. Add APIs to bind / unbind a SPAN agent to a trigger and reference count the trigger entry in preparation for global triggers. Signed-off-by:
-
