- 05 Mar, 2020 40 commits
-
-
Pavel Belous authored
commit a4980919 upstream. skb->len is used to calculate statistics after xmit invocation. Under a stress load it may happen that skb will be xmited, rx interrupt will come and skb will be freed, all before xmit function is even returned. Eventually, skb->len will access unallocated area. Moving stats calculation into tx_clean routine. Fixes: 018423e9 ("net: ethernet: aquantia: Add ring support code") Reported-by:
Christophe Vu-Brugier <cvubrugier@fastmail.fm> Signed-off-by:
Igor Russkikh <irusskikh@marvell.com> Signed-off-by:
Pavel Belous <pbelous@marvell.com> Signed-off-by:
Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nikolay Aleksandrov authored
commit 3a20773b upstream. Since nl_groups is a u32 we can't bind more groups via ->bind (netlink_bind) call, but netlink has supported more groups via setsockopt() for a long time and thus nlk->ngroups could be over 32. Recently I added support for per-vlan notifications and increased the groups to 33 for NETLINK_ROUTE which exposed an old bug in the netlink_bind() code causing out-of-bounds access on archs where unsigned long is 32 bits via test_bit() on a local variable. Fix this by capping the maximum groups in netlink_bind() to BITS_PER_TYPE(u32), effectively capping them at 32 which is the minimum of allocated groups and the maximum groups which can be bound via netlink_bind(). CC: Christophe Leroy <christophe.leroy@c-s.fr> CC: Richard Guy Briggs <rgb@redhat.com> Fixes: 4f520900 ("netlink: have netlink per-protocol bind function return an error code.") Reported-by:
Erhard F. <erhard_f@mailbox.org> Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Alexandra Winter authored
commit 6f3846f0 upstream. When getting or setting VNICC parameters, the error code EOPNOTSUPP should have precedence over EBUSY. EBUSY is used because vnicc feature and bridgeport feature are mutually exclusive, which is a temporary condition. Whereas EOPNOTSUPP indicates that the HW does not support all or parts of the vnicc feature. This issue causes the vnicc sysfs params to show 'blocked by bridgeport' for HW that does not support VNICC at all. Fixes: caa1f0b1 ("s390/qeth: add VNICC enable/disable support") Signed-off-by:
Alexandra Winter <wintera@linux.ibm.com> Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
-
Peter Chen authored
commit ca4b43c1 upstream. To work properly on every architectures and compilers, the enum value needs to be specific numbers. Suggested-by:
Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/1580537624-10179-1-git-send-email-peter.chen@nxp.comSigned-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Haiyang Zhang authored
commit f6f13c12 upstream. When netvsc_attach() is called by operations like changing MTU, etc., an extra wakeup may happen while netvsc_attach() calling rndis_filter_device_add() which sends rndis messages when queue is stopped in netvsc_detach(). The completion message will wake up queue 0. We can reproduce the issue by changing MTU etc., then the wake_queue counter from "ethtool -S" will increase beyond stop_queue counter: stop_queue: 0 wake_queue: 1 The issue causes queue wake up, and counter increment, no other ill effects in current code. So we didn't see any network problem for now. To fix this, initialize tx_disable to true, and set it to false when the NIC is ready to be attached or registered. Fixes: 7b2ee50c ("hv_netvsc: common detach logic") Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
Tina Zhang authored
commit 3eb55e6f upstream. ALL_ENGINES reset doesn't clobber display with the current gvt-g supported platforms. Thus ALL_ENGINES reset shouldn't reset the display engine registers emulated by gvt-g. This fixes guest warning like [ 14.622026] [drm] Initialized i915 1.6.0 20200114 for 0000:00:03.0 on minor 0 [ 14.967917] fbcon: i915drmfb (fb0) is primary device [ 25.100188] [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] E RROR [CRTC:51:pipe A] flip_done timed out [ 25.100860] -----------[ cut here ]----------- [ 25.100861] pll on state mismatch (expected 0, found 1) [ 25.101024] WARNING: CPU: 1 PID: 30 at drivers/gpu/drm/i915/display/intel_dis play.c:14382 verify_single_dpll_state.isra.115+0x28f/0x320 [i915] [ 25.101025] Modules linked in: intel_rapl_msr intel_rapl_common kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel i915 aesni_intel cr ypto_simd cryptd glue_helper cec rc_core video drm_kms_helper joydev drm input_l eds i2c_algo_bit serio_raw fb_sys_fops syscopyarea sysfillrect sysimgblt mac_hid qemu_fw_cfg sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 e1000 psmouse i2c_piix4 pata_acpi floppy [ 25.101052] CPU: 1 PID: 30 Comm: kworker/u4:1 Not tainted 5.5.0+ #1 [ 25.101053] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1 .12.1-0-ga5cab58 04/01/2014 [ 25.101055] Workqueue: events_unbound async_run_entry_fn [ 25.101092] RIP: 0010:verify_single_dpll_state.isra.115+0x28f/0x320 [i915] [ 25.101093] Code: e0 d9 ff e9 a3 fe ff ff 80 3d e9 c2 11 00 00 44 89 f6 48 c7 c7 c0 9d 88 c0 75 3b e8 eb df d9 ff e9 c7 fe ff ff e8 d1 e0 ae c4 <0f> 0b e9 7a fe ff ff 80 3d c0 c2 11 00 00 8d 71 41 89 c2 48 c7 c7 [ 25.101093] RSP: 0018:ffffb1de80107878 EFLAGS: 00010286 [ 25.101094] RAX: 0000000000000000 RBX: ffffb1de80107884 RCX: 0000000000000007 [ 25.101095] RDX: 0000000000000000 RSI: 0000000000000002 RDI: ffff94fdfdd19740 [ 25.101095] RBP: ffffb1de80107938 R08: 0000000d6bfdc7b4 R09: 000000000000002b [ 25.101096] R10: ffff94fdf82dc000 R11: 0000000000000225 R12: 00000000000001f8 [ 25.101096] R13: ffff94fdb3ca6a90 R14: ffff94fdb3ca0000 R15: 0000000000000000 [ 25.101097] FS: 0000000000000000(0000) GS:ffff94fdfdd00000(0000) knlGS:00000 00000000000 [ 25.101098] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 25.101098] CR2: 00007fbc3e2be9c8 CR3: 000000003339a003 CR4: 0000000000360ee0 [ 25.101101] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 25.101101] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 25.101102] Call Trace: [ 25.101139] intel_atomic_commit_tail+0xde4/0x1520 [i915] [ 25.101141] ? flush_workqueue_prep_pwqs+0xfa/0x130 [ 25.101142] ? flush_workqueue+0x198/0x3c0 [ 25.101174] intel_atomic_commit+0x2ad/0x320 [i915] [ 25.101209] drm_atomic_commit+0x4a/0x50 [drm] [ 25.101220] drm_client_modeset_commit_atomic+0x1c4/0x200 [drm] [ 25.101231] drm_client_modeset_commit_force+0x47/0x170 [drm] [ 25.101250] drm_fb_helper_restore_fbdev_mode_unlocked+0x4e/0xa0 [drm_kms_hel per] [ 25.101255] drm_fb_helper_set_par+0x2d/0x60 [drm_kms_helper] [ 25.101287] intel_fbdev_set_par+0x1a/0x40 [i915] [ 25.101289] ? con_is_visible+0x2e/0x60 [ 25.101290] fbcon_init+0x378/0x600 [ 25.101292] visual_init+0xd5/0x130 [ 25.101296] do_bind_con_driver+0x217/0x430 [ 25.101297] do_take_over_console+0x7d/0x1b0 [ 25.101298] do_fbcon_takeover+0x5c/0xb0 [ 25.101299] fbcon_fb_registered+0x199/0x1a0 [ 25.101301] register_framebuffer+0x22c/0x330 [ 25.101306] __drm_fb_helper_initial_config_and_unlock+0x31a/0x520 [drm_kms_h elper] [ 25.101311] drm_fb_helper_initial_config+0x35/0x40 [drm_kms_helper] [ 25.101341] intel_fbdev_initial_config+0x18/0x30 [i915] [ 25.101342] async_run_entry_fn+0x3c/0x150 [ 25.101343] process_one_work+0x1fd/0x3f0 [ 25.101344] worker_thread+0x34/0x410 [ 25.101346] kthread+0x121/0x140 [ 25.101346] ? process_one_work+0x3f0/0x3f0 [ 25.101347] ? kthread_park+0x90/0x90 [ 25.101350] ret_from_fork+0x35/0x40 [ 25.101351] --[ end trace b5b47d44cd998ba1 ]-- Fixes: 6294b61b ("drm/i915/gvt: add missing display part reset for vGPU reset") Signed-off-by:
Tina Zhang <tina.zhang@intel.com> Reviewed-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by:
-
Tina Zhang authored
commit b549c252 upstream. Deleting dmabuf item's list head after releasing its container can lead to KASAN-reported issue: BUG: KASAN: use-after-free in __list_del_entry_valid+0x15/0xf0 Read of size 8 at addr ffff88818a4598a8 by task kworker/u8:3/13119 So fix this issue by puting deleting dmabuf_objs ahead of releasing its container. Fixes: dfb6ae4e ("drm/i915/gvt: Handle orphan dmabuf_objs") Signed-off-by:
-
Wolfram Sang authored
commit 9e661ced upstream. The printout for txabrt is way too talkative and is highly annoying with scanning programs like 'i2cdetect'. Reduce it to the minimum, the rest can be gained by I2C core debugging and datasheet information. Also, make it a debug printout, it won't help the regular user. Fixes: ba92222e ("i2c: jz4780: Add i2c bus controller driver for Ingenic JZ4780") Reported-by:
H. Nikolaus Schaller <hns@goldelico.com> Tested-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Gustavo A. R. Silva authored
commit 54498e80 upstream. Factor out 100 from the equation and do 32-bit arithmetic (3 * clk_mhz / 10) instead of 64-bit. Notice that clk_mhz is MHz, so the multiplication will never wrap 32 bits and there is no need for div_u64(). Addresses-Coverity: 1458369 ("Unintentional integer overflow") Fixes: 0560ad57 ("i2c: altera: Add Altera I2C Controller driver") Suggested-by:
David Laight <David.Laight@ACULAB.COM> Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by:
Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by:
-
Christophe JAILLET authored
commit bef8e2df upstream. Pointer on the memory allocated by 'alloc_progmem()' is stored in 'v->load_addr'. So this is this memory that should be freed by 'release_progmem()'. 'release_progmem()' is only a call to 'kfree()'. With the current code, there is both a double free and a memory leak. Fix it by passing the correct pointer to 'release_progmem()'. Fixes: e01402b1 ("More AP / SP bits for the 34K, the Malta bits and things. Still wants") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
Paul Burton <paulburton@kernel.org> Cc: ralf@linux-mips.org Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: kernel-janitors@vger.kernel.org Signed-off-by:
-
dan.carpenter@oracle.com authored
commit 5c02c447 upstream. Syzbot reports that "hiddev" is used after it's free in hiddev_disconnect(). The hiddev_disconnect() function sets "hiddev->exist = 0;" so hiddev_release() can free it as soon as we drop the "existancelock" lock. This patch moves the mutex_unlock(&hiddev->existancelock) until after we have finished using it. Reported-by: syzbot+784ccb935f9900cc7c9e@syzkaller.appspotmail.com Fixes: 7f77897e ("HID: hiddev: fix potential use-after-free") Suggested-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Christophe JAILLET authored
commit 8d2e77b3 upstream. They are issues: - if 'input_allocate_device()' fails and return NULL, there is no need to free anything and 'input_free_device()' call is a no-op. It can be axed. - 'ret' is known to be 0 at this point, so we must set it to a meaningful value before returning Fixes: 2562756d ("HID: add Alps I2C HID Touchpad-Stick support") Signed-off-by:
-
Eugenio Pérez authored
commit 42d84c84 upstream. Doing so, we save one call to get data we already have in the struct. Also, since there is no guarantee that getname use sockaddr_ll parameter beyond its size, we add a little bit of security here. It should do not do beyond MAX_ADDR_LEN, but syzbot found that ax25_getname writes more (72 bytes, the size of full_sockaddr_ax25, versus 20 + 32 bytes of sockaddr_ll + MAX_ADDR_LEN in syzbot repro). Fixes: 3a4d5c94 ("vhost_net: a kernel-level virtio server") Reported-by: syzbot+f2a62d07a5198c819c7b@syzkaller.appspotmail.com Signed-off-by:
Eugenio Pérez <eperezma@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Shirish S authored
commit a3ed353c upstream. fixes S3 issue with IOMMU + S/G enabled @ 64M VRAM. Suggested-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Shirish S <shirish.s@amd.com> Reviewed-by:
-
Orson Zhai authored
commit 66d0e797 upstream. This reverts commit 4585fbcb. The name changing as devfreq(X) breaks some user space applications, such as Android HAL from Unisoc and Hikey [1]. The device name will be changed unexpectly after every boot depending on module init sequence. It will make trouble to setup some system configuration like selinux for Android. So we'd like to revert it back to old naming rule before any better way being found. [1] https://lkml.org/lkml/2018/5/8/1042 Cc: John Stultz <john.stultz@linaro.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable@vger.kernel.org Signed-off-by:
Orson Zhai <orson.unisoc@gmail.com> Acked-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
-
Steven Rostedt (VMware) authored
commit 78041c0c upstream. The tracing seftests checks various aspects of the tracing infrastructure, and one is filtering. If trace_printk() is active during a self test, it can cause the filtering to fail, which will disable that part of the trace. To keep the selftests from failing because of trace_printk() calls, trace_printk() checks the variable tracing_selftest_running, and if set, it does not write to the tracing buffer. As some tracers were registered earlier in boot, the selftest they triggered would fail because not all the infrastructure was set up for the full selftest. Thus, some of the tests were post poned to when their infrastructure was ready (namely file system code). The postpone code did not set the tracing_seftest_running variable, and could fail if a trace_printk() was added and executed during their run. Cc: stable@vger.kernel.org Fixes: 9afecfbb ("tracing: Postpone tracer start-up tests till the system is more robust") Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Wolfram Sang authored
commit 38b17afb upstream. Removing attach_adapter from this driver caused a regression for at least some machines. Those machines had the sensors described in their DT, too, so they didn't need manual creation of the sensor devices. The old code worked, though, because manual creation came first. Creation of DT devices then failed later and caused error logs, but the sensors worked nonetheless because of the manually created devices. When removing attach_adaper, manual creation now comes later and loses the race. The sensor devices were already registered via DT, yet with another binding, so the driver could not be bound to it. This fix refactors the code to remove the race and only manually creates devices if there are no DT nodes present. Also, the DT binding is updated to match both, the DT and manually created devices. Because we don't know which device creation will be used at runtime, the code to start the kthread is moved to do_probe() which will be called by both methods. Fixes: 3e7bed52 ("macintosh: therm_windtunnel: drop using attach_adapter") Link: https://bugzilla.kernel.org/show_bug.cgi?id=201723Reported-by:
-
Johan Korsnes authored
commit 84a40626 upstream. We have a HID touch device that reports its opens and shorts test results in HID buffers of size 8184 bytes. The maximum size of the HID buffer is currently set to 4096 bytes, causing probe of this device to fail. With this patch we increase the maximum size of the HID buffer to 8192 bytes, making device probe and acquisition of said buffers succeed. Signed-off-by:
Johan Korsnes <jkorsnes@cisco.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Armando Visconti <armando.visconti@st.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Johan Korsnes authored
commit 5ebdffd2 upstream. In case a report is greater than HID_MAX_BUFFER_SIZE, it is truncated, but the report-number byte is not correctly handled. This results in a off-by-one in the following memset, causing a kernel Oops and ensuing system crash. Note: With commit 8ec321e9 ("HID: Fix slab-out-of-bounds read in hid_field_extract") I no longer hit the kernel Oops as we instead fail "controlled" at probe if there is a report too long in the HID report-descriptor. hid_report_raw_event() is an exported symbol, so presumabely we cannot always rely on this being the case. Fixes: 966922f2 ("HID: fix a crash in hid_report_raw_event() function.") Signed-off-by:
-
Hans de Goede authored
commit beae5619 upstream. Commit 8f18eca9 ("HID: ite: Add USB id match for Acer SW5-012 keyboard dock") added the USB id for the Acer SW5-012's keyboard dock to the hid-ite driver to fix the rfkill driver not working. Most keyboard docks with an ITE 8595 keyboard/touchpad controller have the "Wireless Radio Control" bits which need the special hid-ite driver on the second USB interface (the mouse interface) and their touchpad only supports mouse emulation, so using generic hid-input handling for anything but the "Wireless Radio Control" bits is fine. On these devices we simply bind to all USB interfaces. But unlike other ITE8595 using keyboard docks, the Acer Aspire Switch 10 (SW5-012)'s touchpad not only does mouse emulation it also supports HID-multitouch and all the keys including the "Wireless Radio Control" bits have been moved to the first USB interface (the keyboard intf). So we need hid-ite to handle the first (keyboard) USB interface and have it NOT bind to the second (mouse) USB interface so that that can be handled by hid-multitouch.c and we get proper multi-touch support. This commit changes the hid_device_id for the SW5-012 keyboard dock to only match on hid devices from the HID_GROUP_GENERIC group, this way hid-ite will not bind the the mouse/multi-touch interface which has HID_GROUP_MULTITOUCH_WIN_8 as group. This fixes the regression to mouse-emulation mode introduced by adding the keyboard dock USB id. Cc: stable@vger.kernel.org Fixes: 8f18eca9 ("HID: ite: Add USB id match for Acer SW5-012 keyboard dock") Reported-by:
Zdeněk Rampas <zdenda.rampas@gmail.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
-
Oliver Upton authored
commit 86f7e90c upstream. KVM emulates UMIP on hardware that doesn't support it by setting the 'descriptor table exiting' VM-execution control and performing instruction emulation. When running nested, this emulation is broken as KVM refuses to emulate L2 instructions by default. Correct this regression by allowing the emulation of descriptor table instructions if L1 hasn't requested 'descriptor table exiting'. Fixes: 07721fee ("KVM: nVMX: Don't emulate instructions in guest mode") Reported-by:
Jan Kiszka <jan.kiszka@web.de> Cc: stable@vger.kernel.org Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Jim Mattson <jmattson@google.com> Signed-off-by:
Oliver Upton <oupton@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Mika Westerberg authored
commit 2ba33a4e upstream. ACPI Generic Address Structure (GAS) access_width field is not in bytes as the driver seems to expect in few places so fix this by using the newly introduced macro ACPI_ACCESS_BYTE_WIDTH(). Fixes: b1abf6fc ("ACPI / watchdog: Fix off-by-one error at resource assignment") Fixes: 058dfc76 ("ACPI / watchdog: Add support for WDAT hardware watchdog") Reported-by:
Jean Delvare <jdelvare@suse.de> Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Mika Westerberg authored
commit 1dade3a7 upstream. Sometimes it is useful to find the access_width field value in bytes and not in bits so add a helper that can be used for this purpose. Suggested-by:
-
Paul Moore authored
commit 2ad3e17e upstream. Commit 219ca394 ("audit: use union for audit_field values since they are mutually exclusive") combined a number of separate fields in the audit_field struct into a single union. Generally this worked just fine because they are generally mutually exclusive. Unfortunately in audit_data_to_entry() the overlap can be a problem when a specific error case is triggered that causes the error path code to attempt to cleanup an audit_field struct and the cleanup involves attempting to free a stored LSM string (the lsm_str field). Currently the code always has a non-NULL value in the audit_field.lsm_str field as the top of the for-loop transfers a value into audit_field.val (both .lsm_str and .val are part of the same union); if audit_data_to_entry() fails and the audit_field struct is specified to contain a LSM string, but the audit_field.lsm_str has not yet been properly set, the error handling code will attempt to free the bogus audit_field.lsm_str value that was set with audit_field.val at the top of the for-loop. This patch corrects this by ensuring that the audit_field.val is only set when needed (it is cleared when the audit_field struct is allocated with kcalloc()). It also corrects a few other issues to ensure that in case of error the proper error code is returned. Cc: stable@vger.kernel.org Fixes: 219ca394 ("audit: use union for audit_field values since they are mutually exclusive") Reported-by: syzbot+1f4d90ead370d72e450b@syzkaller.appspotmail.com Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Dan Carpenter authored
commit 37b0b6b8 upstream. If sbi->s_flex_groups_allocated is zero and the first allocation fails then this code will crash. The problem is that "i--" will set "i" to -1 but when we compare "i >= sbi->s_flex_groups_allocated" then the -1 is type promoted to unsigned and becomes UINT_MAX. Since UINT_MAX is more than zero, the condition is true so we call kvfree(new_groups[-1]). The loop will carry on freeing invalid memory until it crashes. Fixes: 7c990728 ("ext4: fix potential race between s_flex_groups online resizing and access") Reviewed-by:
Suraj Jitindar Singh <surajjs@amazon.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Rohit Maheshwari authored
[ Upstream commit 06f5201c ] Current code doesn't check if tcp sequence number is starting from (/after) 1st record's start sequnce number. It only checks if seq number is before 1st record's end sequnce number. This problem will always be a possibility in re-transmit case. If a record which belongs to a requested seq number is already deleted, tls_get_record will start looking into list and as per the check it will look if seq number is before the end seq of 1st record, which will always be true and will return 1st record always, it should in fact return NULL. As part of the fix, start looking each record only if the sequence number lies in the list else return NULL. There is one more check added, driver look for the start marker record to handle tcp packets which are before the tls offload start sequence number, hence return 1st record if the record is tls start marker and seq number is before the 1st record's starting sequence number. Fixes: e8f69799 ("net/tls: Add generic NIC offload infrastructure") Signed-off-by:
Rohit Maheshwari <rohitm@chelsio.com> Reviewed-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Michal Kalderon authored
[ Upstream commit af6565ad ] If an event is added while the rdma workqueue is being destroyed it could lead to several races, list corruption, null pointer dereference during queue_work or init_queue. This fixes the race between the two flows which can occur during shutdown. A kref object and a completion object are added to the rdma_dev structure, these are initialized before the workqueue is created. The refcnt is used to indicate work is being added to the workqueue and ensures the cleanup flow won't start while we're in the middle of adding the event. Once the work is added, the refcnt is decreased and the cleanup flow is safe to run. Fixes: cee9fbd8 ("qede: Add qedr framework") Signed-off-by:
Ariel Elior <ariel.elior@marvell.com> Signed-off-by:
Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by:
-
Benjamin Poirier authored
[ Upstream commit afecdb37 ] When splitting an RTA_MULTIPATH request into multiple routes and adding the second and later components, we must not simply remove NLM_F_REPLACE but instead replace it by NLM_F_CREATE. Otherwise, it may look like the netlink message was malformed. For example, ip route add 2001:db8::1/128 dev dummy0 ip route change 2001:db8::1/128 nexthop via fe80::30:1 dev dummy0 \ nexthop via fe80::30:2 dev dummy0 results in the following warnings: [ 1035.057019] IPv6: RTM_NEWROUTE with no NLM_F_CREATE or NLM_F_REPLACE [ 1035.057517] IPv6: NLM_F_CREATE should be set when creating new route This patch makes the nlmsg sequence look equivalent for __ip6_ins_rt() to what it would get if the multipath route had been added in multiple netlink operations: ip route add 2001:db8::1/128 dev dummy0 ip route change 2001:db8::1/128 nexthop via fe80::30:1 dev dummy0 ip route append 2001:db8::1/128 nexthop via fe80::30:2 dev dummy0 Fixes: 27596472 ("ipv6: fix ECMP route replacement") Signed-off-by:
Benjamin Poirier <bpoirier@cumulusnetworks.com> Reviewed-by:
Michal Kubecek <mkubecek@suse.cz> Reviewed-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Benjamin Poirier authored
[ Upstream commit e404b8c7 ] After commit 27596472 ("ipv6: fix ECMP route replacement") it is no longer possible to replace an ECMP-able route by a non ECMP-able route. For example, ip route add 2001:db8::1/128 via fe80::1 dev dummy0 ip route replace 2001:db8::1/128 dev dummy0 does not work as expected. Tweak the replacement logic so that point 3 in the log of the above commit becomes: 3. If the new route is not ECMP-able, and no matching non-ECMP-able route exists, replace matching ECMP-able route (if any) or add the new route. We can now summarize the entire replace semantics to: When doing a replace, prefer replacing a matching route of the same "ECMP-able-ness" as the replace argument. If there is no such candidate, fallback to the first route found. Fixes: 27596472 ("ipv6: fix ECMP route replacement") Signed-off-by:
-
Xin Long authored
[ Upstream commit 245709ec ] When T2 timer is to be stopped, the asoc should also be deleted, otherwise, there will be no chance to call sctp_association_free and the asoc could last in memory forever. However, in sctp_sf_shutdown_sent_abort(), after adding the cmd SCTP_CMD_TIMER_STOP for T2 timer, it may return error due to the format error from __sctp_sf_do_9_1_abort() and miss adding SCTP_CMD_ASSOC_FAILED where the asoc will be deleted. This patch is to fix it by moving the format error check out of __sctp_sf_do_9_1_abort(), and do it before adding the cmd SCTP_CMD_TIMER_STOP for T2 timer. Thanks Hangbin for reporting this issue by the fuzz testing. v1->v2: - improve the comment in the code as Marcelo's suggestion. Fixes: 96ca468b ("sctp: check invalid value of length parameter in error cause") Reported-by:
Hangbin Liu <liuhangbin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Dmitry Osipenko authored
[ Upstream commit c3331d2f ] The PN544 driver checks the "enable" polarity during of driver's probe and it's doing that by turning ON and OFF NFC with different polarities until enabling succeeds. It takes some time for the hardware to power-down, and thus, to deassert the IRQ that is raised by turning ON the hardware. Since the delay after last power-down of the polarity-checking process is missed in the code, the interrupt may trigger immediately after installing the IRQ handler (right after the checking is done), which results in IRQ handler trying to touch the disabled HW and ends with marking NFC as 'DEAD' during of the driver's probe: pn544_hci_i2c 1-002a: NFC: nfc_en polarity : active high pn544_hci_i2c 1-002a: NFC: invalid len byte shdlc: llc_shdlc_recv_frame: NULL Frame -> link is dead This patch fixes the occasional NFC initialization failure on Nexus 7 device. Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
-
Jason Baron authored
[ Upstream commit 8a9093c7 ] tc flower rules that are based on src or dst port blocking are sometimes ineffective due to uninitialized stack data. __skb_flow_dissect() extracts ports from the skb for tc flower to match against. However, the port dissection is not done when when the FLOW_DIS_IS_FRAGMENT bit is set in key_control->flags. All callers of __skb_flow_dissect(), zero-out the key_control field except for fl_classify() as used by the flower classifier. Thus, the FLOW_DIS_IS_FRAGMENT may be set on entry to __skb_flow_dissect(), since key_control is allocated on the stack and may not be initialized. Since key_basic and key_control are present for all flow keys, let's make sure they are initialized. Fixes: 62230715 ("flow_dissector: do not dissect l4 ports for fragments") Co-developed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
Jason Baron <jbaron@akamai.com> Signed-off-by:
-
Arun Parameswaran authored
commit 6f08e98d upstream. The mii management register in iproc mdio block does not have a retention register so it is lost on suspend. Save and restore value of register while resuming from suspend. Fixes: bb1a6197 ("net: phy: Initialize mdio clock at probe function") Signed-off-by:
Arun Parameswaran <arun.parameswaran@broadcom.com> Signed-off-by:
Scott Branden <scott.branden@broadcom.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Horatiu Vultur authored
[ Upstream commit a8154104 ] Each extracted frame on Ocelot has an IFH. The frame and IFH are extracted by reading chuncks of 4 bytes from a register. In case the IFH and frames were read corretly it would try to read the next frame. In case there are no more frames in the queue, it checks if there were any previous errors and in that case clear the queue. But this check will always succeed also when there are no errors. Because when extracting the IFH the error is checked against 4(number of bytes read) and then the error is set only if the extraction of the frame failed. So in a happy case where there are no errors the err variable is still 4. So it could be a case where after the check that there are no more frames in the queue, a frame will arrive in the queue but because the error is not reseted, it would try to flush the queue. So the frame will be lost. The fix consist in resetting the error after reading the IFH. Signed-off-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Jethro Beekman authored
[ Upstream commit 540e585a ] In 709772e6, RT_TABLE_COMPAT was added to allow legacy software to deal with routing table numbers >= 256, but the same change to FIB rule queries was overlooked. Signed-off-by:
Jethro Beekman <jethro@fortanix.com> Signed-off-by:
-
Petr Mladek authored
commit c3fee609 upstream. The commit 97f5f0cd ("Input: implement SysRq as a separate input handler") added pr_fmt() definition. It caused a duplicated message prefix in the sysrq header messages, for example: [ 177.053931] sysrq: SysRq : Show backtrace of all active CPUs [ 742.864776] sysrq: SysRq : HELP : loglevel(0-9) reboot(b) crash(c) Fixes: 97f5f0cd ("Input: implement SysRq as a separate input handler") Signed-off-by:
Petr Mladek <pmladek@suse.com> Reviewed-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Tommi Rantala <tommi.t.rantala@nokia.com> Signed-off-by:
-
Petr Mladek authored
commit 075e1a0c upstream. The sysrq header line is printed with an increased loglevel to provide users some positive feedback. The original loglevel is not restored when the sysrq operation is disabled. This bug was introduced in 2.6.12 (pre-git-history) by the commit ("Allow admin to enable only some of the Magic-Sysrq functions"). Signed-off-by:
-
Sergey Matyukevich authored
[ Upstream commit ea750801 ] The nl80211_policy is missing for NL80211_ATTR_STATUS_CODE attribute. As a result, for strictly validated commands, it's assumed to not be supported. Signed-off-by:
Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20200213131608.10541-2-sergey.matyukevich.os@quantenna.comSigned-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Frank Sorenson authored
[ Upstream commit f52aa79d ] A number of the debug statements output file or directory mode in hex. Change these to print using octal. Signed-off-by:
Frank Sorenson <sorenson@redhat.com> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
-
Arthur Kiyanovski authored
[ Upstream commit c207979f ] comp_ctx can be NULL in a very rare case when an admin command is executed during the execution of ena_remove(). The bug scenario is as follows: * ena_destroy_device() sets the comp_ctx to be NULL * An admin command is executed before executing unregister_netdev(), this can still happen because our device can still receive callbacks from the netdev infrastructure such as ethtool commands. * When attempting to access the comp_ctx, the bug occurs since it's set to NULL Fix: Added a check that comp_ctx is not NULL Fixes: 1738cd3e ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by:
Sameeh Jubran <sameehj@amazon.com> Signed-off-by:
Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by:
-
