Commits · 0aa4d016c043d16a282e7e93edf6213a7b954c90 · Kirill Smelkov / linux

20 Dec, 2019 1 commit

of: mdio: export of_mdiobus_child_is_phy · 0aa4d016

Antoine Tenart authored Dec 17, 2019

This patch exports of_mdiobus_child_is_phy, allowing to check if a child
node is a network PHY.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

0aa4d016

19 Dec, 2019 9 commits

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf · 0fd26005

David S. Miller authored Dec 19, 2019

Daniel Borkmann says:

====================
pull-request: bpf 2019-12-19

The following pull-request contains BPF updates for your *net* tree.

We've added 10 non-merge commits during the last 8 day(s) which contain
a total of 21 files changed, 269 insertions(+), 108 deletions(-).

The main changes are:

1) Fix lack of synchronization between xsk wakeup and destroying resources
   used by xsk wakeup, from Maxim Mikityanskiy.

2) Fix pruning with tail call patching, untrack programs in case of verifier
   error and fix a cgroup local storage tracking bug, from Daniel Borkmann.

3) Fix clearing skb->tstamp in bpf_redirect() when going from ingress to
   egress which otherwise cause issues e.g. on fq qdisc, from Lorenz Bauer.

4) Fix compile warning of unused proc_dointvec_minmax_bpf_restricted() when
   only cBPF is present, from Alexander Lobakin.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

0fd26005

bpf: Add further test_verifier cases for record_func_key · 3123d801

Daniel Borkmann authored Dec 19, 2019

Expand dummy prog generation such that we can easily check on return
codes and add few more test cases to make sure we keep on tracking
pruning behavior.

  # ./test_verifier
  [...]
  #1066/p XDP pkt read, pkt_data <= pkt_meta', bad access 1 OK
  #1067/p XDP pkt read, pkt_data <= pkt_meta', bad access 2 OK
  Summary: 1580 PASSED, 0 SKIPPED, 0 FAILED

Also verified that JIT dump of added test cases looks good.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/df7200b6021444fd369376d227de917357285b65.1576789878.git.daniel@iogearbox.net

3123d801

bpf: Fix record_func_key to perform backtracking on r3 · cc52d914

Daniel Borkmann authored Dec 19, 2019

While testing Cilium with /unreleased/ Linus' tree under BPF-based NodePort
implementation, I noticed a strange BPF SNAT engine behavior from time to
time. In some cases it would do the correct SNAT/DNAT service translation,
but at a random point in time it would just stop and perform an unexpected
translation after SYN, SYN/ACK and stack would send a RST back. While initially
assuming that there is some sort of a race condition in BPF code, adding
trace_printk()s for debugging purposes at some point seemed to have resolved
the issue auto-magically.

Digging deeper on this Heisenbug and reducing the trace_printk() calls to
an absolute minimum, it turns out that a single call would suffice to
trigger / not trigger the seen RST issue, even though the logic of the
program itself remains unchanged. Turns out the single call changed verifier
pruning behavior to get everything to work. Reconstructing a minimal test
case, the incorrect JIT dump looked as follows:

  # bpftool p d j i 11346
  0xffffffffc0cba96c:
  [...]
    21:   movzbq 0x30(%rdi),%rax
    26:   cmp    $0xd,%rax
    2a:   je     0x000000000000003a
    2c:   xor    %edx,%edx
    2e:   movabs $0xffff89cc74e85800,%rsi
    38:   jmp    0x0000000000000049
    3a:   mov    $0x2,%edx
    3f:   movabs $0xffff89cc74e85800,%rsi
    49:   mov    -0x224(%rbp),%eax
    4f:   cmp    $0x20,%eax
    52:   ja     0x0000000000000062
    54:   add    $0x1,%eax
    57:   mov    %eax,-0x224(%rbp)
    5d:   jmpq   0xffffffffffff6911
    62:   mov    $0x1,%eax
  [...]

Hence, unexpectedly, JIT emitted a direct jump even though retpoline based
one would have been needed since in line 2c and 3a we have different slot
keys in BPF reg r3. Verifier log of the test case reveals what happened:

  0: (b7) r0 = 14
  1: (73) *(u8 *)(r1 +48) = r0
  2: (71) r0 = *(u8 *)(r1 +48)
  3: (15) if r0 == 0xd goto pc+4
   R0_w=inv(id=0,umax_value=255,var_off=(0x0; 0xff)) R1=ctx(id=0,off=0,imm=0) R10=fp0
  4: (b7) r3 = 0
  5: (18) r2 = 0xffff89cc74d54a00
  7: (05) goto pc+3
  11: (85) call bpf_tail_call#12
  12: (b7) r0 = 1
  13: (95) exit
  from 3 to 8: R0_w=inv13 R1=ctx(id=0,off=0,imm=0) R10=fp0
  8: (b7) r3 = 2
  9: (18) r2 = 0xffff89cc74d54a00
  11: safe
  processed 13 insns (limit 1000000) [...]

Second branch is pruned by verifier since considered safe, but issue is that
record_func_key() couldn't have seen the index in line 3a and therefore
decided that emitting a direct jump at this location was okay.

Fix this by reusing our backtracking logic for precise scalar verification
in order to prevent pruning on the slot key. This means verifier will track
content of r3 all the way backwards and only prune if both scalars were
unknown in state equivalence check and therefore poisoned in the first place
in record_func_key(). The range is [x,x] in record_func_key() case since
the slot always would have to be constant immediate. Correct verification
after fix:

  0: (b7) r0 = 14
  1: (73) *(u8 *)(r1 +48) = r0
  2: (71) r0 = *(u8 *)(r1 +48)
  3: (15) if r0 == 0xd goto pc+4
   R0_w=invP(id=0,umax_value=255,var_off=(0x0; 0xff)) R1=ctx(id=0,off=0,imm=0) R10=fp0
  4: (b7) r3 = 0
  5: (18) r2 = 0x0
  7: (05) goto pc+3
  11: (85) call bpf_tail_call#12
  12: (b7) r0 = 1
  13: (95) exit
  from 3 to 8: R0_w=invP13 R1=ctx(id=0,off=0,imm=0) R10=fp0
  8: (b7) r3 = 2
  9: (18) r2 = 0x0
  11: (85) call bpf_tail_call#12
  12: (b7) r0 = 1
  13: (95) exit
  processed 15 insns (limit 1000000) [...]

And correct corresponding JIT dump:

  # bpftool p d j i 11
  0xffffffffc0dc34c4:
  [...]
    21:	  movzbq 0x30(%rdi),%rax
    26:	  cmp    $0xd,%rax
    2a:	  je     0x000000000000003a
    2c:	  xor    %edx,%edx
    2e:	  movabs $0xffff9928b4c02200,%rsi
    38:	  jmp    0x0000000000000049
    3a:	  mov    $0x2,%edx
    3f:	  movabs $0xffff9928b4c02200,%rsi
    49:	  cmp    $0x4,%rdx
    4d:	  jae    0x0000000000000093
    4f:	  and    $0x3,%edx
    52:	  mov    %edx,%edx
    54:	  cmp    %edx,0x24(%rsi)
    57:	  jbe    0x0000000000000093
    59:	  mov    -0x224(%rbp),%eax
    5f:	  cmp    $0x20,%eax
    62:	  ja     0x0000000000000093
    64:	  add    $0x1,%eax
    67:	  mov    %eax,-0x224(%rbp)
    6d:	  mov    0x110(%rsi,%rdx,8),%rax
    75:	  test   %rax,%rax
    78:	  je     0x0000000000000093
    7a:	  mov    0x30(%rax),%rax
    7e:	  add    $0x19,%rax
    82:   callq  0x000000000000008e
    87:   pause
    89:   lfence
    8c:   jmp    0x0000000000000087
    8e:   mov    %rax,(%rsp)
    92:   retq
    93:   mov    $0x1,%eax
  [...]

Also explicitly adding explicit env->allow_ptr_leaks to fixup_bpf_calls() since
backtracking is enabled under former (direct jumps as well, but use different
test). In case of only tracking different map pointers as in c93552c4 ("bpf:
properly enforce index mask to prevent out-of-bounds speculation"), pruning
cannot make such short-cuts, neither if there are paths with scalar and non-scalar
types as r3. mark_chain_precision() is only needed after we know that
register_is_const(). If it was not the case, we already poison the key on first
path and non-const key in later paths are not matching the scalar range in regsafe()
either. Cilium NodePort testing passes fine as well now. Note, released kernels
not affected.

Fixes: d2e4c1e6 ("bpf: Constant map key tracking for prog array pokes")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/ac43ffdeb7386c5bd688761ed266f3722bb39823.1576789878.git.daniel@iogearbox.net

cc52d914

net, sysctl: Fix compiler warning when only cBPF is present · 1148f9ad

Alexander Lobakin authored Dec 18, 2019

proc_dointvec_minmax_bpf_restricted() has been firstly introduced
in commit 2e4a3098 ("bpf: restrict access to core bpf sysctls")
under CONFIG_HAVE_EBPF_JIT. Then, this ifdef has been removed in
ede95a63 ("bpf: add bpf_jit_limit knob to restrict unpriv
allocations"), because a new sysctl, bpf_jit_limit, made use of it.
Finally, this parameter has become long instead of integer with
fdadd049 ("bpf: fix bpf_jit_limit knob for PAGE_SIZE >= 64K")
and thus, a new proc_dolongvec_minmax_bpf_restricted() has been
added.

With this last change, we got back to that
proc_dointvec_minmax_bpf_restricted() is used only under
CONFIG_HAVE_EBPF_JIT, but the corresponding ifdef has not been
brought back.

So, in configurations like CONFIG_BPF_JIT=y && CONFIG_HAVE_EBPF_JIT=n
since v4.20 we have:

  CC      net/core/sysctl_net_core.o
net/core/sysctl_net_core.c:292:1: warning: ‘proc_dointvec_minmax_bpf_restricted’ defined but not used [-Wunused-function]
  292 | proc_dointvec_minmax_bpf_restricted(struct ctl_table *table, int write,
      | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Suppress this by guarding it with CONFIG_HAVE_EBPF_JIT again.

Fixes: fdadd049 ("bpf: fix bpf_jit_limit knob for PAGE_SIZE >= 64K")
Signed-off-by: Alexander Lobakin <alobakin@dlink.ru>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191218091821.7080-1-alobakin@dlink.ru

1148f9ad

Merge branch 'bpf-fix-xsk-wakeup' · ca8d0fa7

Daniel Borkmann authored Dec 19, 2019

Maxim Mikityanskiy says:

====================
This series addresses the issue described in the commit message of the
first patch: lack of synchronization between XSK wakeup and destroying
the resources used by XSK wakeup. The idea is similar to napi_synchronize.
The series contains fixes for the drivers that implement XSK.

v2 incorporates changes suggested by Björn:

1. Call synchronize_rcu in Intel drivers only if the XDP program is
   being unloaded.
2. Don't forget rcu_read_lock when wakeup is called from xsk_poll.
3. Use xs->zc as the condition to call ndo_xsk_wakeup.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

ca8d0fa7

net/ixgbe: Fix concurrency issues between config flow and XSK · c0fdccfd

Maxim Mikityanskiy authored Dec 17, 2019

Use synchronize_rcu to wait until the XSK wakeup function finishes
before destroying the resources it uses:

1. ixgbe_down already calls synchronize_rcu after setting __IXGBE_DOWN.

2. After switching the XDP program, call synchronize_rcu to let
ixgbe_xsk_wakeup exit before the XDP program is freed.

3. Changing the number of channels brings the interface down.

4. Disabling UMEM sets __IXGBE_TX_DISABLED before closing hardware
resources and resetting xsk_umem. Check that bit in ixgbe_xsk_wakeup to
avoid using the XDP ring when it's already destroyed. synchronize_rcu is
called from ixgbe_txrx_ring_disable.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191217162023.16011-5-maximmi@mellanox.com

c0fdccfd

net/i40e: Fix concurrency issues between config flow and XSK · b3873a5b

Maxim Mikityanskiy authored Dec 17, 2019

Use synchronize_rcu to wait until the XSK wakeup function finishes
before destroying the resources it uses:

1. i40e_down already calls synchronize_rcu. On i40e_down either
__I40E_VSI_DOWN or __I40E_CONFIG_BUSY is set. Check the latter in
i40e_xsk_wakeup (the former is already checked there).

2. After switching the XDP program, call synchronize_rcu to let
i40e_xsk_wakeup exit before the XDP program is freed.

3. Changing the number of channels brings the interface down (see
i40e_prep_for_reset and i40e_pf_quiesce_all_vsi).

4. Disabling UMEM sets __I40E_CONFIG_BUSY, too.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191217162023.16011-4-maximmi@mellanox.com

b3873a5b

net/mlx5e: Fix concurrency issues between config flow and XSK · 9cf88808

Maxim Mikityanskiy authored Dec 17, 2019

After disabling resources necessary for XSK (the XDP program, channels,
XSK queues), use synchronize_rcu to wait until the XSK wakeup function
finishes, before freeing the resources.

Suspend XSK wakeups during switching channels. If the XDP program is
being removed, synchronize_rcu before closing the old channels to allow
XSK wakeup to complete.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191217162023.16011-3-maximmi@mellanox.com

9cf88808

xsk: Add rcu_read_lock around the XSK wakeup · 06870682

Maxim Mikityanskiy authored Dec 17, 2019

The XSK wakeup callback in drivers makes some sanity checks before
triggering NAPI. However, some configuration changes may occur during
this function that affect the result of those checks. For example, the
interface can go down, and all the resources will be destroyed after the
checks in the wakeup function, but before it attempts to use these
resources. Wrap this callback in rcu_read_lock to allow driver to
synchronize_rcu before actually destroying the resources.

xsk_wakeup is a new function that encapsulates calling ndo_xsk_wakeup
wrapped into the RCU lock. After this commit, xsk_poll starts using
xsk_wakeup and checks xs->zc instead of ndo_xsk_wakeup != NULL to decide
ndo_xsk_wakeup should be called. It also fixes a bug introduced with the
need_wakeup feature: a non-zero-copy socket may be used with a driver
supporting zero-copy, and in this case ndo_xsk_wakeup should not be
called, so the xs->zc check is the correct one.

Fixes: 77cd0d7b ("xsk: add support for need_wakeup flag in AF_XDP rings")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191217162023.16011-2-maximmi@mellanox.com

06870682

18 Dec, 2019 19 commits

Merge branch 'stmmac-fixes' · 6fa9a115

David S. Miller authored Dec 18, 2019

Jose Abreu says:

====================
net: stmmac: Fixes for -net

Fixes for stmmac.

1) Fixes the filtering selftests (again) for cases when the number of multicast
filters are not enough.

2) Fixes SPH feature for MTU > default.

3) Fixes the behavior of accepting invalid MTU values.

4) Fixes FCS stripping for multi-descriptor packets.

5) Fixes the change of RX buffer size in XGMAC.

6) Fixes RX buffer size alignment.

7) Fixes the 16KB buffer alignment.

8) Fixes the enabling of 16KB buffer size feature.

9) Always arm the TX coalesce timer so that missed interrupts do not cause
a TX queue timeout.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

6fa9a115