These calls are not invoked externally.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/bfa/bfa_port.c:760:1: warning: no previous prototype for ‘bfa_cee_isr’ [-Wmissing-prototypes]
 760 | bfa_cee_isr(void *cbarg, struct bfi_mbmsg_s *m)
 | ^~~~~~~~~~~
 drivers/scsi/bfa/bfa_port.c:796:1: warning: no previous prototype for ‘bfa_cee_notify’ [-Wmissing-prototypes]
 796 | bfa_cee_notify(void *arg, enum bfa_ioc_event_e event)
 | ^~~~~~~~~~~~~~

Link: https://lore.kernel.org/r/20200723122446.1329773-8-lee.jones@linaro.org
Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com>
Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

This is the only use of kerneldoc in the source file and no descriptions
are provided.

Fixes the following W=1 kernel build warning(s):

In file included from  drivers/scsi/ufs/ufs-exynos.c:23:
 drivers/scsi/ufs/ufs-exynos.c:234: warning: Function parameter or member 'ufs' not described in 'exynos_ufs_auto_ctrl_hcc'
 drivers/scsi/ufs/ufs-exynos.c:234: warning: Function parameter or member 'en' not described in 'exynos_ufs_auto_ctrl_hcc'

Link: https://lore.kernel.org/r/20200723122446.1329773-7-lee.jones@linaro.org
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Seungwon Jeon <essuuj@gmail.com>
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/bnx2i/bnx2i_init.c:83: warning: Function parameter or member 'dev' not described in 'bnx2i_identify_device'
 drivers/scsi/bnx2i/bnx2i_init.c:83: warning: Excess function parameter 'cnic' description in 'bnx2i_identify_device'

Link: https://lore.kernel.org/r/20200723122446.1329773-5-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Cc: Anil Veerabhadrappa <anilgv@broadcom.com>
Cc: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/ufs/ufs-qcom.c:253: warning: Function parameter or member 'hba' not described in 'ufs_qcom_host_reset'
 drivers/scsi/ufs/ufs-qcom.c:383: warning: Function parameter or member 'hba' not described in 'ufs_qcom_cfg_timers'
 drivers/scsi/ufs/ufs-qcom.c:383: warning: Function parameter or member 'gear' not described in 'ufs_qcom_cfg_timers'
 drivers/scsi/ufs/ufs-qcom.c:383: warning: Function parameter or member 'hs' not described in 'ufs_qcom_cfg_timers'
 drivers/scsi/ufs/ufs-qcom.c:383: warning: Function parameter or member 'rate' not described in 'ufs_qcom_cfg_timers'
 drivers/scsi/ufs/ufs-qcom.c:383: warning: Function parameter or member 'update_link_startup_timer' not described in 'ufs_qcom_cfg_timers'
 drivers/scsi/ufs/ufs-qcom.c:1738: error: Cannot parse struct or union!

Link: https://lore.kernel.org/r/20200723122446.1329773-4-lee.jones@linaro.org
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/lpfc/lpfc_hbadisc.c:1209: warning: Function parameter or member 'phba' not described in 'lpfc_sli4_clear_fcf_rr_bmask'
 drivers/scsi/lpfc/lpfc_hbadisc.c:1309: warning: Function parameter or member 'sw_name' not described in 'lpfc_sw_name_match'
 drivers/scsi/lpfc/lpfc_hbadisc.c:1309: warning: Excess function parameter 'fab_name' description in 'lpfc_sw_name_match'
 drivers/scsi/lpfc/lpfc_hbadisc.c:1397: warning: Function parameter or member 'fcf_rec' not described in 'lpfc_copy_fcf_record'
 drivers/scsi/lpfc/lpfc_hbadisc.c:1397: warning: Excess function parameter 'fcf' description in 'lpfc_copy_fcf_record'
 drivers/scsi/lpfc/lpfc_hbadisc.c:1956: warning: Cannot understand  lpfc_sli4_fcf_record_match - testing new FCF record for matching existing FCF
 on line 1956 - I thought it was a doc line
 drivers/scsi/lpfc/lpfc_hbadisc.c:2078: warning: Function parameter or member 'fcf_index' not described in 'lpfc_sli4_fcf_pri_list_del'
 drivers/scsi/lpfc/lpfc_hbadisc.c:2109: warning: Function parameter or member 'fcf_index' not described in 'lpfc_sli4_set_fcf_flogi_fail'
 drivers/scsi/lpfc/lpfc_hbadisc.c:2135: warning: Function parameter or member 'fcf_index' not described in 'lpfc_sli4_fcf_pri_list_add'
 drivers/scsi/lpfc/lpfc_hbadisc.c:2135: warning: Function parameter or member 'new_fcf_record' not described in 'lpfc_sli4_fcf_pri_list_add'

Link: https://lore.kernel.org/r/20200723122446.1329773-3-lee.jones@linaro.org
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/lpfc/lpfc_els.c:3619: warning: Function parameter or member 't' not described in 'lpfc_els_retry_delay'
 drivers/scsi/lpfc/lpfc_els.c:3619: warning: Excess function parameter 'ptr' description in 'lpfc_els_retry_delay'
 drivers/scsi/lpfc/lpfc_els.c:4877: warning: Function parameter or member 'rejectError' not described in 'lpfc_els_rsp_reject'
 drivers/scsi/lpfc/lpfc_els.c:7900: warning: Function parameter or member 't' not described in 'lpfc_els_timeout'
 drivers/scsi/lpfc/lpfc_els.c:7900: warning: Excess function parameter 'ptr' description in 'lpfc_els_timeout'
 drivers/scsi/lpfc/lpfc_els.c:8272: warning: Function parameter or member 'payload' not described in 'lpfc_send_els_event'
 drivers/scsi/lpfc/lpfc_els.c:8272: warning: Excess function parameter 'cmd' description in 'lpfc_send_els_event'
 drivers/scsi/lpfc/lpfc_els.c:8355: warning: Function parameter or member 'tlv' not described in 'lpfc_els_rcv_fpin_li'
 drivers/scsi/lpfc/lpfc_els.c:8355: warning: Excess function parameter 'lnk_not' description in 'lpfc_els_rcv_fpin_li'
 drivers/scsi/lpfc/lpfc_els.c:9688: warning: Function parameter or member 't' not described in 'lpfc_fabric_block_timeout'
 drivers/scsi/lpfc/lpfc_els.c:9688: warning: Excess function parameter 'ptr' description in 'lpfc_fabric_block_timeout'

Link: https://lore.kernel.org/r/20200723122446.1329773-2-lee.jones@linaro.org
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Also move the header block above the correct function.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/cxgbi/cxgb3i/cxgb3i.c:390: warning: Function parameter or member 'dev' not described in 'arp_failure_skb_discard'
 drivers/scsi/cxgbi/cxgb3i/cxgb3i.c:390: warning: Function parameter or member 'skb' not described in 'arp_failure_skb_discard'
 drivers/scsi/cxgbi/cxgb3i/cxgb3i.c:390: warning: Excess function parameter 'c3cn' description in 'arp_failure_skb_discard'
 drivers/scsi/cxgbi/cxgb3i/cxgb3i.c:390: warning: Excess function parameter 'req_completion' description in 'arp_failure_skb_discard'
 drivers/scsi/cxgbi/cxgb3i/cxgb3i.c:895: warning: Function parameter or member 'csk' not described in 'l2t_put'
 drivers/scsi/cxgbi/cxgb3i/cxgb3i.c:895: warning: Excess function parameter 'c3cn' description in 'l2t_put'

Link: https://lore.kernel.org/r/20200721164148.2617584-41-lee.jones@linaro.org
Cc: Karen Xie <kxie@chelsio.com>
Cc: Dimitris Michailidis <dm@chelsio.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Only declare 'tp' and 'lp' if they are going to be used.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/sym53c8xx_2/sym_hipd.c: In function ‘sym_complete_error’:
 drivers/scsi/sym53c8xx_2/sym_hipd.c:5356:18: warning: variable ‘lp’ set but not used [-Wunused-but-set-variable]
 drivers/scsi/sym53c8xx_2/sym_hipd.c: In function ‘sym_complete_ok’:
 drivers/scsi/sym53c8xx_2/sym_hipd.c:5485:18: warning: variable ‘lp’ set but not used [-Wunused-but-set-variable]

Link: https://lore.kernel.org/r/20200721164148.2617584-39-lee.jones@linaro.org
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Gerard Roudier <groudier@free.fr>
Cc: Wolfgang Stanglmeier <wolf@cologne.de>
Cc: Stefan Esser <se@mi.Uni-Koeln.de>
Cc: Richard Waltham <dormouse@farsrobt.demon.co.uk>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/sym53c8xx_2/sym_glue.c:1784: warning: Function parameter or member 'pdev' not described in 'sym2_reset_workarounds'

Link: https://lore.kernel.org/r/20200721164148.2617584-38-lee.jones@linaro.org
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Gerard Roudier <groudier@free.fr>
Cc: Wolfgang Stanglmeier <wolf@cologne.de>
Cc: Stefan Esser <se@mi.Uni-Koeln.de>
Cc: Richard Waltham <dormouse@farsrobt.demon.co.uk>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

'pg_addr' is only used when CONFIG_X86 is defined.  So only declare it if
CONFIG_X86 is defined.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/lpfc/lpfc_sli.c: In function ‘lpfc_wq_create’:
 drivers/scsi/lpfc/lpfc_sli.c:15813:16: warning: unused variable ‘pg_addr’ [-Wunused-variable]
 15813 | unsigned long pg_addr;
 | ^~~~~~~

Link: https://lore.kernel.org/r/20200721164148.2617584-37-lee.jones@linaro.org
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/bfa/bfad_bsg.c:19:1: warning: no previous prototype for ‘bfad_iocmd_ioc_enable’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:42:1: warning: no previous prototype for ‘bfad_iocmd_ioc_disable’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:150:1: warning: no previous prototype for ‘bfad_iocmd_ioc_get_fwstats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:180:1: warning: no previous prototype for ‘bfad_iocmd_ioc_reset_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:198:1: warning: no previous prototype for ‘bfad_iocmd_ioc_set_name’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:212:1: warning: no previous prototype for ‘bfad_iocmd_iocfc_get_attr’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:223:1: warning: no previous prototype for ‘bfad_iocmd_ioc_fw_sig_inv’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:235:1: warning: no previous prototype for ‘bfad_iocmd_iocfc_set_intr’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:248:1: warning: no previous prototype for ‘bfad_iocmd_port_enable’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:269:1: warning: no previous prototype for ‘bfad_iocmd_port_disable’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:319:1: warning: no previous prototype for ‘bfad_iocmd_port_get_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:353:1: warning: no previous prototype for ‘bfad_iocmd_port_reset_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:374:1: warning: no previous prototype for ‘bfad_iocmd_set_port_cfg’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:394:1: warning: no previous prototype for ‘bfad_iocmd_port_cfg_maxfrsize’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:408:1: warning: no previous prototype for ‘bfad_iocmd_port_cfg_bbcr’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:431:1: warning: no previous prototype for ‘bfad_iocmd_port_get_bbcr_attr’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:469:1: warning: no previous prototype for ‘bfad_iocmd_lport_get_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:493:1: warning: no previous prototype for ‘bfad_iocmd_lport_reset_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:527:1: warning: no previous prototype for ‘bfad_iocmd_lport_get_iostats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:552:1: warning: no previous prototype for ‘bfad_iocmd_lport_get_rports’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:594:1: warning: no previous prototype for ‘bfad_iocmd_rport_get_attr’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:680:1: warning: no previous prototype for ‘bfad_iocmd_rport_get_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:721:1: warning: no previous prototype for ‘bfad_iocmd_rport_clr_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:757:1: warning: no previous prototype for ‘bfad_iocmd_rport_set_speed’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:793:1: warning: no previous prototype for ‘bfad_iocmd_vport_get_attr’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:816:1: warning: no previous prototype for ‘bfad_iocmd_vport_get_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:844:1: warning: no previous prototype for ‘bfad_iocmd_vport_clr_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:911:1: warning: no previous prototype for ‘bfad_iocmd_qos_set_bw’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:924:1: warning: no previous prototype for ‘bfad_iocmd_ratelim’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:953:1: warning: no previous prototype for ‘bfad_iocmd_ratelim_speed’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:982:1: warning: no previous prototype for ‘bfad_iocmd_cfg_fcpim’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:995:1: warning: no previous prototype for ‘bfad_iocmd_fcpim_get_modstats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1017:1: warning: no previous prototype for ‘bfad_iocmd_fcpim_clr_modstats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1039:1: warning: no previous prototype for ‘bfad_iocmd_fcpim_get_del_itn_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1164:1: warning: no previous prototype for ‘bfad_iocmd_fcport_enable’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1177:1: warning: no previous prototype for ‘bfad_iocmd_fcport_disable’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1190:1: warning: no previous prototype for ‘bfad_iocmd_ioc_get_pcifn_cfg’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1212:1: warning: no previous prototype for ‘bfad_iocmd_pcifn_create’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1235:1: warning: no previous prototype for ‘bfad_iocmd_pcifn_delete’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1257:1: warning: no previous prototype for ‘bfad_iocmd_pcifn_bw’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1281:1: warning: no previous prototype for ‘bfad_iocmd_adapter_cfg_mode’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1304:1: warning: no previous prototype for ‘bfad_iocmd_port_cfg_mode’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1328:1: warning: no previous prototype for ‘bfad_iocmd_ablk_optrom’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1354:1: warning: no previous prototype for ‘bfad_iocmd_faa_query’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1377:1: warning: no previous prototype for ‘bfad_iocmd_cee_attr’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1413:1: warning: no previous prototype for ‘bfad_iocmd_cee_get_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1450:1: warning: no previous prototype for ‘bfad_iocmd_cee_reset_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1464:1: warning: no previous prototype for ‘bfad_iocmd_sfp_media’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1486:1: warning: no previous prototype for ‘bfad_iocmd_sfp_speed’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1507:1: warning: no previous prototype for ‘bfad_iocmd_flash_get_attr’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1528:1: warning: no previous prototype for ‘bfad_iocmd_flash_erase_part’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1548:1: warning: no previous prototype for ‘bfad_iocmd_flash_update_part’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1580:1: warning: no previous prototype for ‘bfad_iocmd_flash_read_part’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1612:1: warning: no previous prototype for ‘bfad_iocmd_diag_temp’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1634:1: warning: no previous prototype for ‘bfad_iocmd_diag_memtest’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1657:1: warning: no previous prototype for ‘bfad_iocmd_diag_loopback’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1680:1: warning: no previous prototype for ‘bfad_iocmd_diag_fwping’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1704:1: warning: no previous prototype for ‘bfad_iocmd_diag_queuetest’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1725:1: warning: no previous prototype for ‘bfad_iocmd_diag_sfp’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1748:1: warning: no previous prototype for ‘bfad_iocmd_diag_led’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1761:1: warning: no previous prototype for ‘bfad_iocmd_diag_beacon_lport’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1776:1: warning: no previous prototype for ‘bfad_iocmd_diag_lb_stat’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1791:1: warning: no previous prototype for ‘bfad_iocmd_diag_dport_enable’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1813:1: warning: no previous prototype for ‘bfad_iocmd_diag_dport_disable’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1833:1: warning: no previous prototype for ‘bfad_iocmd_diag_dport_start’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1858:1: warning: no previous prototype for ‘bfad_iocmd_diag_dport_show’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1873:1: warning: no previous prototype for ‘bfad_iocmd_phy_get_attr’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1894:1: warning: no previous prototype for ‘bfad_iocmd_phy_get_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1915:1: warning: no previous prototype for ‘bfad_iocmd_phy_read’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1947:1: warning: no previous prototype for ‘bfad_iocmd_vhba_query’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1966:1: warning: no previous prototype for ‘bfad_iocmd_phy_update’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1996:1: warning: no previous prototype for ‘bfad_iocmd_porglog_get’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2016:1: warning: no previous prototype for ‘bfad_iocmd_debug_fw_core’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2050:1: warning: no previous prototype for ‘bfad_iocmd_debug_ctl’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2071:1: warning: no previous prototype for ‘bfad_iocmd_porglog_ctl’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2085:1: warning: no previous prototype for ‘bfad_iocmd_fcpim_cfg_profile’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2129:1: warning: no previous prototype for ‘bfad_iocmd_fcport_get_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2154:1: warning: no previous prototype for ‘bfad_iocmd_fcport_reset_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2178:1: warning: no previous prototype for ‘bfad_iocmd_boot_cfg’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2200:1: warning: no previous prototype for ‘bfad_iocmd_boot_query’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2222:1: warning: no previous prototype for ‘bfad_iocmd_preboot_query’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2241:1: warning: no previous prototype for ‘bfad_iocmd_ethboot_cfg’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2264:1: warning: no previous prototype for ‘bfad_iocmd_ethboot_query’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2287:1: warning: no previous prototype for ‘bfad_iocmd_cfg_trunk’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2327:1: warning: no previous prototype for ‘bfad_iocmd_trunk_get_attr’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2350:1: warning: no previous prototype for ‘bfad_iocmd_qos’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2378:1: warning: no previous prototype for ‘bfad_iocmd_qos_get_attr’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2404:1: warning: no previous prototype for ‘bfad_iocmd_qos_get_vc_attr’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2436:1: warning: no previous prototype for ‘bfad_iocmd_qos_get_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2468:1: warning: no previous prototype for ‘bfad_iocmd_qos_reset_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2499:1: warning: no previous prototype for ‘bfad_iocmd_vf_get_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2522:1: warning: no previous prototype for ‘bfad_iocmd_vf_clr_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2559:1: warning: no previous prototype for ‘bfad_iocmd_lunmask’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2582:1: warning: no previous prototype for ‘bfad_iocmd_fcpim_lunmask_query’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2596:1: warning: no previous prototype for ‘bfad_iocmd_fcpim_cfg_lunmask’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2615:1: warning: no previous prototype for ‘bfad_iocmd_fcpim_throttle_query’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2630:1: warning: no previous prototype for ‘bfad_iocmd_fcpim_throttle_set’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2645:1: warning: no previous prototype for ‘bfad_iocmd_tfru_read’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2667:1: warning: no previous prototype for ‘bfad_iocmd_tfru_write’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2689:1: warning: no previous prototype for ‘bfad_iocmd_fruvpd_read’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2711:1: warning: no previous prototype for ‘bfad_iocmd_fruvpd_update’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2733:1: warning: no previous prototype for ‘bfad_iocmd_fruvpd_get_max_size’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:3181:1: warning: no previous prototype for ‘bfad_fcxp_get_req_sgaddr_cb’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:3193:1: warning: no previous prototype for ‘bfad_fcxp_get_req_sglen_cb’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:3203:1: warning: no previous prototype for ‘bfad_fcxp_get_rsp_sgaddr_cb’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:3215:1: warning: no previous prototype for ‘bfad_fcxp_get_rsp_sglen_cb’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:3225:1: warning: no previous prototype for ‘bfad_send_fcpt_cb’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:3240:1: warning: no previous prototype for ‘bfad_fcxp_map_sg’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:3284:1: warning: no previous prototype for ‘bfad_fcxp_free_mem’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:3302:1: warning: no previous prototype for ‘bfad_fcxp_bsg_send’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:3342:1: warning: no previous prototype for ‘bfad_im_bsg_els_ct_request’ [-Wmissing-prototypes]

Link: https://lore.kernel.org/r/20200721164148.2617584-36-lee.jones@linaro.org
Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com>
Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

This matches some of the other headers in the file.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/csiostor/csio_lnode.c:2079: warning: Function parameter or member 'hw' not described in 'csio_lnode_init'
 drivers/scsi/csiostor/csio_lnode.c:2079: warning: Function parameter or member 'pln' not described in 'csio_lnode_init'

Link: https://lore.kernel.org/r/20200721164148.2617584-35-lee.jones@linaro.org
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Demote other headers which are clearly not kerneldoc.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/qla4xxx/ql4_nx.c:983: warning: Function parameter or member 'ha' not described in 'qla4_82xx_pinit_from_rom'
 drivers/scsi/qla4xxx/ql4_nx.c:983: warning: Function parameter or member 'verbose' not described in 'qla4_82xx_pinit_from_rom'
 drivers/scsi/qla4xxx/ql4_nx.c:3225: warning: Function parameter or member 'code' not described in 'qla4_8xxx_uevent_emit'
 drivers/scsi/qla4xxx/ql4_nx.c:3697: warning: Function parameter or member 'ha' not described in 'qla4_82xx_read_optrom_data'
 drivers/scsi/qla4xxx/ql4_nx.c:3697: warning: Function parameter or member 'buf' not described in 'qla4_82xx_read_optrom_data'
 drivers/scsi/qla4xxx/ql4_nx.c:3697: warning: Function parameter or member 'offset' not described in 'qla4_82xx_read_optrom_data'
 drivers/scsi/qla4xxx/ql4_nx.c:3697: warning: Function parameter or member 'length' not described in 'qla4_82xx_read_optrom_data'

Link: https://lore.kernel.org/r/20200721164148.2617584-34-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/qla4xxx/ql4_nx.c: In function ‘qla4_84xx_minidump_process_rddfe’:
 drivers/scsi/qla4xxx/ql4_nx.c:2648:23: warning: variable ‘data_size’ set but not used [-Wunused-but-set-variable]
 2648 | uint32_t poll, mask, data_size, modify_mask;
 | ^~~~~~~~~
 drivers/scsi/qla4xxx/ql4_nx.c: In function ‘qla4_84xx_minidump_process_rdmdio’:
 drivers/scsi/qla4xxx/ql4_nx.c:2745:11: warning: variable ‘poll’ set but not used [-Wunused-but-set-variable]
 2745 | uint32_t poll, mask;
 | ^~~~
 drivers/scsi/qla4xxx/ql4_nx.c: In function ‘qla4_84xx_minidump_process_pollwr’:
 drivers/scsi/qla4xxx/ql4_nx.c:2816:47: warning: variable ‘mask’ set but not used [-Wunused-but-set-variable]
 2816 | uint32_t addr1, addr2, value1, value2, poll, mask, r_value;
 | ^~~~

Link: https://lore.kernel.org/r/20200721164148.2617584-33-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/csiostor/csio_init.c:595: warning: Function parameter or member 'pln' not described in 'csio_shost_init'
 drivers/scsi/csiostor/csio_init.c:595: warning: Excess function parameter 'os_pln' description in 'csio_shost_init'

Link: https://lore.kernel.org/r/20200721164148.2617584-32-lee.jones@linaro.org
Cc: Saurav Girepunje <saurav.girepunje@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Other headers have been demoted as they are too far out of sync and ideally
require effort from the authors.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/lpfc/lpfc_ct.c:321: warning: Function parameter or member 'usr_flg' not described in 'lpfc_gen_req'
 drivers/scsi/lpfc/lpfc_ct.c:321: warning: Function parameter or member 'num_entry' not described in 'lpfc_gen_req'
 drivers/scsi/lpfc/lpfc_ct.c:321: warning: Function parameter or member 'tmo' not described in 'lpfc_gen_req'
 drivers/scsi/lpfc/lpfc_ct.c:321: warning: Function parameter or member 'retry' not described in 'lpfc_gen_req'
 drivers/scsi/lpfc/lpfc_ct.c:413: warning: Function parameter or member 'rsp_size' not described in 'lpfc_ct_cmd'
 drivers/scsi/lpfc/lpfc_ct.c:413: warning: Function parameter or member 'retry' not described in 'lpfc_ct_cmd'
 drivers/scsi/lpfc/lpfc_ct.c:3030: warning: Function parameter or member 'cmdcode' not described in 'lpfc_fdmi_cmd'
 drivers/scsi/lpfc/lpfc_ct.c:3030: warning: Function parameter or member 'new_mask' not described in 'lpfc_fdmi_cmd'
 drivers/scsi/lpfc/lpfc_ct.c:3272: warning: Function parameter or member 't' not described in 'lpfc_delayed_disc_tmo'

Link: https://lore.kernel.org/r/20200721164148.2617584-31-lee.jones@linaro.org
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/qla4xxx/ql4_init.c:1170: warning: Function parameter or member 'conn_err' not described in 'qla4xxx_process_ddb_changed'

Link: https://lore.kernel.org/r/20200721164148.2617584-30-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/lpfc/lpfc_mem.c:85: warning: Function parameter or member 'align' not described in 'lpfc_mem_alloc'

Link: https://lore.kernel.org/r/20200721164148.2617584-29-lee.jones@linaro.org
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fix one formatting issue, one misspelling and three missing descriptions.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/qla4xxx/ql4_isr.c:588: warning: Excess function parameter 'ret' description in 'qla4_83xx_loopback_in_progress'
 drivers/scsi/qla4xxx/ql4_isr.c:661: warning: Function parameter or member 'mbox_status' not described in 'qla4xxx_isr_decode_mailbox'
 drivers/scsi/qla4xxx/ql4_isr.c:661: warning: Excess function parameter 'mailbox_status' description in 'qla4xxx_isr_decode_mailbox'
 drivers/scsi/qla4xxx/ql4_isr.c:1053: warning: Function parameter or member 'intr_status' not described in 'qla4_82xx_interrupt_service_routine'
 drivers/scsi/qla4xxx/ql4_isr.c:1078: warning: Function parameter or member 'intr_status' not described in 'qla4xxx_interrupt_service_routine'

Link: https://lore.kernel.org/r/20200721164148.2617584-28-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/qla4xxx/ql4_os.c:4551: warning: Function parameter or member 't' not described in 'qla4xxx_timer'
 drivers/scsi/qla4xxx/ql4_os.c:4551: warning: Excess function parameter 'ha' description in 'qla4xxx_timer'
 drivers/scsi/qla4xxx/ql4_os.c:5312: warning: Function parameter or member 'work' not described in 'qla4xxx_do_dpc'
 drivers/scsi/qla4xxx/ql4_os.c:5312: warning: Excess function parameter 'data' description in 'qla4xxx_do_dpc'
 drivers/scsi/qla4xxx/ql4_os.c:8627: warning: Function parameter or member 'ent' not described in 'qla4xxx_probe_adapter'
 drivers/scsi/qla4xxx/ql4_os.c:8627: warning: Excess function parameter 'pci_device_id' description in 'qla4xxx_probe_adapter'
 drivers/scsi/qla4xxx/ql4_os.c:9008: warning: Function parameter or member 'pdev' not described in 'qla4xxx_remove_adapter'
 drivers/scsi/qla4xxx/ql4_os.c:9008: warning: Excess function parameter 'pci_dev' description in 'qla4xxx_remove_adapter'
 drivers/scsi/qla4xxx/ql4_os.c:9181: warning: Function parameter or member 'stgt' not described in 'qla4xxx_eh_wait_for_commands'
 drivers/scsi/qla4xxx/ql4_os.c:9181: warning: Function parameter or member 'sdev' not described in 'qla4xxx_eh_wait_for_commands'
 drivers/scsi/qla4xxx/ql4_os.c:9181: warning: Excess function parameter 't' description in 'qla4xxx_eh_wait_for_commands'
 drivers/scsi/qla4xxx/ql4_os.c:9181: warning: Excess function parameter 'l' description in 'qla4xxx_eh_wait_for_commands'
 drivers/scsi/qla4xxx/ql4_os.c:9646: warning: Function parameter or member 'pdev' not described in 'qla4xxx_pci_mmio_enabled'

Link: https://lore.kernel.org/r/20200721164148.2617584-27-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

These are not invoked externally.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/pm8001/pm80xx_hwi.c:69:6: warning: no previous prototype for ‘pm80xx_pci_mem_copy’ [-Wmissing-prototypes]
 69 | void pm80xx_pci_mem_copy(struct pm8001_hba_info *pm8001_ha, u32 soffset,
 | ^~~~~~~~~~~~~~~~~~~
 drivers/scsi/pm8001/pm80xx_hwi.c:5016:6: warning: no previous prototype for ‘mpi_set_phy_profile_req’ [-Wmissing-prototypes]
 5016 | void mpi_set_phy_profile_req(struct pm8001_hba_info *pm8001_ha,
 | ^~~~~~~~~~~~~~~~~~~~~~~

Link: https://lore.kernel.org/r/20200721164148.2617584-26-lee.jones@linaro.org
Cc: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/lpfc/lpfc_sli.c:257: warning: Function parameter or member 'mqe' not described in 'lpfc_sli4_mq_put'
 drivers/scsi/lpfc/lpfc_sli.c:257: warning: Excess function parameter 'wqe' description in 'lpfc_sli4_mq_put'
 drivers/scsi/lpfc/lpfc_sli.c:675: warning: Function parameter or member 'hq' not described in 'lpfc_sli4_rq_put'
 drivers/scsi/lpfc/lpfc_sli.c:675: warning: Function parameter or member 'dq' not described in 'lpfc_sli4_rq_put'
 drivers/scsi/lpfc/lpfc_sli.c:675: warning: Function parameter or member 'hrqe' not described in 'lpfc_sli4_rq_put'
 drivers/scsi/lpfc/lpfc_sli.c:675: warning: Function parameter or member 'drqe' not described in 'lpfc_sli4_rq_put'
 drivers/scsi/lpfc/lpfc_sli.c:675: warning: Excess function parameter 'q' description in 'lpfc_sli4_rq_put'
 drivers/scsi/lpfc/lpfc_sli.c:675: warning: Excess function parameter 'wqe' description in 'lpfc_sli4_rq_put'
 drivers/scsi/lpfc/lpfc_sli.c:738: warning: Function parameter or member 'hq' not described in 'lpfc_sli4_rq_release'
 drivers/scsi/lpfc/lpfc_sli.c:738: warning: Function parameter or member 'dq' not described in 'lpfc_sli4_rq_release'
 drivers/scsi/lpfc/lpfc_sli.c:738: warning: Excess function parameter 'q' description in 'lpfc_sli4_rq_release'
 drivers/scsi/lpfc/lpfc_sli.c:1021: warning: Function parameter or member 'xritag' not described in 'lpfc_test_rrq_active'
 drivers/scsi/lpfc/lpfc_sli.c:1132: warning: Function parameter or member 'piocbq' not described in '__lpfc_sli_get_els_sglq'
 drivers/scsi/lpfc/lpfc_sli.c:1132: warning: Excess function parameter 'piocb' description in '__lpfc_sli_get_els_sglq'
 drivers/scsi/lpfc/lpfc_sli.c:1207: warning: Function parameter or member 'piocbq' not described in '__lpfc_sli_get_nvmet_sglq'
 drivers/scsi/lpfc/lpfc_sli.c:1207: warning: Excess function parameter 'piocb' description in '__lpfc_sli_get_nvmet_sglq'
 drivers/scsi/lpfc/lpfc_sli.c:2243: warning: Function parameter or member 'rb_list' not described in 'lpfc_sli_hbqbuf_get'
 drivers/scsi/lpfc/lpfc_sli.c:2243: warning: Excess function parameter 'phba' description in 'lpfc_sli_hbqbuf_get'
 drivers/scsi/lpfc/lpfc_sli.c:2243: warning: Excess function parameter 'hbqno' description in 'lpfc_sli_hbqbuf_get'
 drivers/scsi/lpfc/lpfc_sli.c:2262: warning: Function parameter or member 'hrq' not described in 'lpfc_sli_rqbuf_get'
 drivers/scsi/lpfc/lpfc_sli.c:2262: warning: Excess function parameter 'hbqno' description in 'lpfc_sli_rqbuf_get'
 drivers/scsi/lpfc/lpfc_sli.c:3429: warning: Function parameter or member 't' not described in 'lpfc_poll_eratt'
 drivers/scsi/lpfc/lpfc_sli.c:3429: warning: Excess function parameter 'ptr' description in 'lpfc_poll_eratt'
 drivers/scsi/lpfc/lpfc_sli.c:4115: warning: Excess function parameter 'pring' description in 'lpfc_sli_abort_fcp_rings'
 drivers/scsi/lpfc/lpfc_sli.c:5331: warning: Excess function parameter 'mboxq' description in 'lpfc_sli4_read_fcoe_params'
 drivers/scsi/lpfc/lpfc_sli.c:5879: warning: Function parameter or member 'extnt_cnt' not described in 'lpfc_sli4_cfg_post_extnts'
 drivers/scsi/lpfc/lpfc_sli.c:5879: warning: Function parameter or member 'type' not described in 'lpfc_sli4_cfg_post_extnts'
 drivers/scsi/lpfc/lpfc_sli.c:5879: warning: Function parameter or member 'emb' not described in 'lpfc_sli4_cfg_post_extnts'
 drivers/scsi/lpfc/lpfc_sli.c:5879: warning: Function parameter or member 'mbox' not described in 'lpfc_sli4_cfg_post_extnts'
 drivers/scsi/lpfc/lpfc_sli.c:6459: warning: Function parameter or member 'pmb' not described in 'lpfc_sli4_ras_mbox_cmpl'
 drivers/scsi/lpfc/lpfc_sli.c:6459: warning: Excess function parameter 'pmboxq' description in 'lpfc_sli4_ras_mbox_cmpl'
 drivers/scsi/lpfc/lpfc_sli.c:6912: warning: Function parameter or member 'extnt_cnt' not described in 'lpfc_sli4_get_allocated_extnts'
 drivers/scsi/lpfc/lpfc_sli.c:6912: warning: Excess function parameter 'extnt_count' description in 'lpfc_sli4_get_allocated_extnts'
 drivers/scsi/lpfc/lpfc_sli.c:7064: warning: Excess function parameter 'pring' description in 'lpfc_sli4_repost_sgl_list'
 drivers/scsi/lpfc/lpfc_sli.c:7312: warning: Function parameter or member 'phba' not described in 'lpfc_init_idle_stat_hb'
 drivers/scsi/lpfc/lpfc_sli.c:8022: warning: Function parameter or member 't' not described in 'lpfc_mbox_timeout'
 drivers/scsi/lpfc/lpfc_sli.c:8022: warning: Excess function parameter 'ptr' description in 'lpfc_mbox_timeout'
 drivers/scsi/lpfc/lpfc_sli.c:8902: warning: Function parameter or member 'mboxq' not described in 'lpfc_sli_issue_mbox_s4'
 drivers/scsi/lpfc/lpfc_sli.c:8902: warning: Excess function parameter 'pmbox' description in 'lpfc_sli_issue_mbox_s4'
 drivers/scsi/lpfc/lpfc_sli.c:9413: warning: Function parameter or member 'piocbq' not described in 'lpfc_sli4_bpl2sgl'
 drivers/scsi/lpfc/lpfc_sli.c:9413: warning: Excess function parameter 'piocb' description in 'lpfc_sli4_bpl2sgl'
 drivers/scsi/lpfc/lpfc_sli.c:9518: warning: Function parameter or member 'iocbq' not described in 'lpfc_sli4_iocb2wqe'
 drivers/scsi/lpfc/lpfc_sli.c:9518: warning: Excess function parameter 'piocb' description in 'lpfc_sli4_iocb2wqe'
 drivers/scsi/lpfc/lpfc_sli.c:10212: warning: Function parameter or member 'phba' not described in '__lpfc_sli_issue_iocb'
 drivers/scsi/lpfc/lpfc_sli.c:10212: warning: Function parameter or member 'ring_number' not described in '__lpfc_sli_issue_iocb'
 drivers/scsi/lpfc/lpfc_sli.c:10212: warning: Function parameter or member 'piocb' not described in '__lpfc_sli_issue_iocb'
 drivers/scsi/lpfc/lpfc_sli.c:10212: warning: Function parameter or member 'flag' not described in '__lpfc_sli_issue_iocb'
 drivers/scsi/lpfc/lpfc_sli.c:10300: warning: Function parameter or member 'ring_number' not described in 'lpfc_sli_issue_iocb'
 drivers/scsi/lpfc/lpfc_sli.c:10300: warning: Excess function parameter 'pring' description in 'lpfc_sli_issue_iocb'
 drivers/scsi/lpfc/lpfc_sli.c:11807: warning: Function parameter or member 'cmd' not described in 'lpfc_sli_abort_taskmgmt'
 drivers/scsi/lpfc/lpfc_sli.c:11807: warning: Excess function parameter 'taskmgmt_cmd' description in 'lpfc_sli_abort_taskmgmt'
 drivers/scsi/lpfc/lpfc_sli.c:12067: warning: Function parameter or member 'ring_number' not described in 'lpfc_sli_issue_iocb_wait'
 drivers/scsi/lpfc/lpfc_sli.c:12067: warning: Excess function parameter 'pring' description in 'lpfc_sli_issue_iocb_wait'
 drivers/scsi/lpfc/lpfc_sli.c:12262: warning: Function parameter or member 'mbx_action' not described in 'lpfc_sli_mbox_sys_shutdown'
 drivers/scsi/lpfc/lpfc_sli.c:13219: warning: Function parameter or member 'irspiocbq' not described in 'lpfc_sli4_els_wcqe_to_rspiocbq'
 drivers/scsi/lpfc/lpfc_sli.c:13219: warning: Excess function parameter 'wcqe' description in 'lpfc_sli4_els_wcqe_to_rspiocbq'
 drivers/scsi/lpfc/lpfc_sli.c:13285: warning: Function parameter or member 'mcqe' not described in 'lpfc_sli4_sp_handle_async_event'
 drivers/scsi/lpfc/lpfc_sli.c:13285: warning: Excess function parameter 'cqe' description in 'lpfc_sli4_sp_handle_async_event'
 drivers/scsi/lpfc/lpfc_sli.c:13318: warning: Function parameter or member 'mcqe' not described in 'lpfc_sli4_sp_handle_mbox_event'
 drivers/scsi/lpfc/lpfc_sli.c:13318: warning: Excess function parameter 'cqe' description in 'lpfc_sli4_sp_handle_mbox_event'
 drivers/scsi/lpfc/lpfc_sli.c:13441: warning: Function parameter or member 'cq' not described in 'lpfc_sli4_sp_handle_mcqe'
 drivers/scsi/lpfc/lpfc_sli.c:13768: warning: Function parameter or member 'speq' not described in 'lpfc_sli4_sp_handle_eqe'
 drivers/scsi/lpfc/lpfc_sli.c:14126: warning: Function parameter or member 'cq' not described in 'lpfc_sli4_nvmet_handle_rcqe'
 drivers/scsi/lpfc/lpfc_sli.c:14235: warning: Function parameter or member 'cqe' not described in 'lpfc_sli4_fp_handle_cqe'
 drivers/scsi/lpfc/lpfc_sli.c:14235: warning: Excess function parameter 'eqe' description in 'lpfc_sli4_fp_handle_cqe'
 drivers/scsi/lpfc/lpfc_sli.c:14336: warning: Function parameter or member 'eq' not described in 'lpfc_sli4_hba_handle_eqe'
 drivers/scsi/lpfc/lpfc_sli.c:14808: warning: Function parameter or member 'entry_count' not described in 'lpfc_sli4_queue_alloc'
 drivers/scsi/lpfc/lpfc_sli.c:15185: warning: Function parameter or member 'type' not described in 'lpfc_cq_create'
 drivers/scsi/lpfc/lpfc_sli.c:15185: warning: Function parameter or member 'subtype' not described in 'lpfc_cq_create'
 drivers/scsi/lpfc/lpfc_sli.c:15333: warning: Function parameter or member 'type' not described in 'lpfc_cq_create_set'
 drivers/scsi/lpfc/lpfc_sli.c:15333: warning: Function parameter or member 'subtype' not described in 'lpfc_cq_create_set'
 drivers/scsi/lpfc/lpfc_sli.c:16063: warning: Function parameter or member 'subtype' not described in 'lpfc_rq_create'
 drivers/scsi/lpfc/lpfc_sli.c:16353: warning: Function parameter or member 'subtype' not described in 'lpfc_mrq_create'
 drivers/scsi/lpfc/lpfc_sli.c:16533: warning: Function parameter or member 'phba' not described in 'lpfc_eq_destroy'
 drivers/scsi/lpfc/lpfc_sli.c:16590: warning: Function parameter or member 'phba' not described in 'lpfc_cq_destroy'
 drivers/scsi/lpfc/lpfc_sli.c:16644: warning: Function parameter or member 'phba' not described in 'lpfc_mq_destroy'
 drivers/scsi/lpfc/lpfc_sli.c:16644: warning: Function parameter or member 'mq' not described in 'lpfc_mq_destroy'
 drivers/scsi/lpfc/lpfc_sli.c:16644: warning: Excess function parameter 'qm' description in 'lpfc_mq_destroy'
 drivers/scsi/lpfc/lpfc_sli.c:16698: warning: Function parameter or member 'phba' not described in 'lpfc_wq_destroy'
 drivers/scsi/lpfc/lpfc_sli.c:16754: warning: Function parameter or member 'phba' not described in 'lpfc_rq_destroy'
 drivers/scsi/lpfc/lpfc_sli.c:16754: warning: Function parameter or member 'hrq' not described in 'lpfc_rq_destroy'
 drivers/scsi/lpfc/lpfc_sli.c:16754: warning: Function parameter or member 'drq' not described in 'lpfc_rq_destroy'
 drivers/scsi/lpfc/lpfc_sli.c:16754: warning: Excess function parameter 'rq' description in 'lpfc_rq_destroy'
 drivers/scsi/lpfc/lpfc_sli.c:16940: warning: Function parameter or member 'xri' not described in '__lpfc_sli4_free_xri'
 drivers/scsi/lpfc/lpfc_sli.c:16955: warning: Function parameter or member 'xri' not described in 'lpfc_sli4_free_xri'
 drivers/scsi/lpfc/lpfc_sli.c:17002: warning: Function parameter or member 'post_cnt' not described in 'lpfc_sli4_post_sgl_list'
 drivers/scsi/lpfc/lpfc_sli.c:17002: warning: Excess function parameter 'count' description in 'lpfc_sli4_post_sgl_list'
 drivers/scsi/lpfc/lpfc_sli.c:17221: warning: Function parameter or member 'sb_count' not described in 'lpfc_sli4_post_io_sgl_list'
 drivers/scsi/lpfc/lpfc_sli.c:17451: warning: Function parameter or member 'did' not described in 'lpfc_fc_frame_to_vport'
 drivers/scsi/lpfc/lpfc_sli.c:17590: warning: Function parameter or member 'vport' not described in 'lpfc_fc_frame_add'
 drivers/scsi/lpfc/lpfc_sli.c:17817: warning: Function parameter or member 'vport' not described in 'lpfc_sli4_seq_abort_rsp'
 drivers/scsi/lpfc/lpfc_sli.c:17817: warning: Function parameter or member 'aborted' not described in 'lpfc_sli4_seq_abort_rsp'
 drivers/scsi/lpfc/lpfc_sli.c:17817: warning: Excess function parameter 'phba' description in 'lpfc_sli4_seq_abort_rsp'
 drivers/scsi/lpfc/lpfc_sli.c:18060: warning: Function parameter or member 'seq_dmabuf' not described in 'lpfc_prep_seq'
 drivers/scsi/lpfc/lpfc_sli.c:18060: warning: Excess function parameter 'dmabuf' description in 'lpfc_prep_seq'
 drivers/scsi/lpfc/lpfc_sli.c:18332: warning: Function parameter or member 'dmabuf' not described in 'lpfc_sli4_handle_received_buffer'
 drivers/scsi/lpfc/lpfc_sli.c:18655: warning: Function parameter or member 'rpi' not described in '__lpfc_sli4_free_rpi'
 drivers/scsi/lpfc/lpfc_sli.c:18683: warning: Function parameter or member 'rpi' not described in 'lpfc_sli4_free_rpi'
 drivers/scsi/lpfc/lpfc_sli.c:18714: warning: Function parameter or member 'ndlp' not described in 'lpfc_sli4_resume_rpi'
 drivers/scsi/lpfc/lpfc_sli.c:18714: warning: Function parameter or member 'cmpl' not described in 'lpfc_sli4_resume_rpi'
 drivers/scsi/lpfc/lpfc_sli.c:18714: warning: Function parameter or member 'arg' not described in 'lpfc_sli4_resume_rpi'
 drivers/scsi/lpfc/lpfc_sli.c:18714: warning: Excess function parameter 'phba' description in 'lpfc_sli4_resume_rpi'
 drivers/scsi/lpfc/lpfc_sli.c:19103: warning: Function parameter or member 'phba' not described in 'lpfc_check_next_fcf_pri_level'
 drivers/scsi/lpfc/lpfc_sli.c:19266: warning: Function parameter or member 'fcf_index' not described in 'lpfc_sli4_fcf_rr_index_set'
 drivers/scsi/lpfc/lpfc_sli.c:19295: warning: Function parameter or member 'fcf_index' not described in 'lpfc_sli4_fcf_rr_index_clear'
 drivers/scsi/lpfc/lpfc_sli.c:19331: warning: Function parameter or member 'mbox' not described in 'lpfc_mbx_cmpl_redisc_fcf_table'
 drivers/scsi/lpfc/lpfc_sli.c:20027: warning: Function parameter or member 'pwqeq' not described in 'lpfc_wqe_bpl2sgl'
 drivers/scsi/lpfc/lpfc_sli.c:20027: warning: Excess function parameter 'pwqe' description in 'lpfc_wqe_bpl2sgl'
 drivers/scsi/lpfc/lpfc_sli.c:20141: warning: Function parameter or member 'qp' not described in 'lpfc_sli4_issue_wqe'
 drivers/scsi/lpfc/lpfc_sli.c:20141: warning: Excess function parameter 'ring_number' description in 'lpfc_sli4_issue_wqe'
 drivers/scsi/lpfc/lpfc_sli.c:20434: warning: Function parameter or member 'qp' not described in '_lpfc_move_xri_pbl_to_pvt'
 drivers/scsi/lpfc/lpfc_sli.c:20552: warning: Function parameter or member 'hwqid' not described in 'lpfc_keep_pvt_pool_above_lowwm'
 drivers/scsi/lpfc/lpfc_sli.c:20552: warning: Excess function parameter 'qp' description in 'lpfc_keep_pvt_pool_above_lowwm'
 drivers/scsi/lpfc/lpfc_sli.c:20682: warning: Function parameter or member 'qp' not described in 'lpfc_get_io_buf_from_private_pool'

Link: https://lore.kernel.org/r/20200721164148.2617584-24-lee.jones@linaro.org
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

from  drivers/scsi/qla4xxx/ql4_iocb.c:8:
 drivers/scsi/qla4xxx/ql4_iocb.c:87: warning: Function parameter or member 'mrkr_mod' not described in 'qla4xxx_send_marker_iocb'
 drivers/scsi/qla4xxx/ql4_iocb.c:87: warning: Excess function parameter 'marker_type' description in 'qla4xxx_send_marker_iocb'

Link: https://lore.kernel.org/r/20200721164148.2617584-23-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Also demote incomplete header from kerneldoc.

Fixes the following W=1 kernel build warning(s):

from  drivers/scsi/qla4xxx/ql4_mbx.c:9:
 drivers/scsi/qla4xxx/ql4_mbx.c:53: warning: Excess function parameter 'ret' description in 'qla4xxx_is_intr_poll_mode'
 drivers/scsi/qla4xxx/ql4_mbx.c:832: warning: Function parameter or member 'fw_ddb_entry_dma' not described in 'qla4xxx_get_fwddb_entry'
 drivers/scsi/qla4xxx/ql4_mbx.c:832: warning: Function parameter or member 'conn_err_detail' not described in 'qla4xxx_get_fwddb_entry'
 drivers/scsi/qla4xxx/ql4_mbx.c:832: warning: Function parameter or member 'tcp_source_port_num' not described in 'qla4xxx_get_fwddb_entry'
 drivers/scsi/qla4xxx/ql4_mbx.c:832: warning: Function parameter or member 'connection_id' not described in 'qla4xxx_get_fwddb_entry'
 drivers/scsi/qla4xxx/ql4_mbx.c:1271: warning: Function parameter or member 'ddb_entry' not described in 'qla4xxx_reset_target'
 drivers/scsi/qla4xxx/ql4_mbx.c:1271: warning: Excess function parameter 'db_entry' description in 'qla4xxx_reset_target'
 drivers/scsi/qla4xxx/ql4_mbx.c:1271: warning: Excess function parameter 'un_entry' description in 'qla4xxx_reset_target'

Link: https://lore.kernel.org/r/20200721164148.2617584-22-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/lpfc/lpfc_sli.c: In function ‘lpfc_wq_create’:
 drivers/scsi/lpfc/lpfc_sli.c:15810:16: warning: variable ‘pg_addr’ set but not used [-Wunused-but-set-variable]
 15810 | unsigned long pg_addr;
 | ^~~~~~~

Link: https://lore.kernel.org/r/20200721164148.2617584-21-lee.jones@linaro.org
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 In file included from drivers/scsi/qla4xxx/ql4_def.h:43,
 from drivers/scsi/qla4xxx/ql4_mbx.c:9:
 drivers/scsi/qla4xxx/ql4_nx.h:602:23: warning: ‘qla4_82xx_reg_tbl’ defined but not used [-Wunused-const-variable=]
 602 | static const uint32_t qla4_82xx_reg_tbl[] = {
 | ^~~~~~~~~~~~~~~~~
 [...]
 NB: Lots of these

Link: https://lore.kernel.org/r/20200721164148.2617584-20-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/qla4xxx/ql4_os.c: In function ‘qla4xxx_eh_cmd_timed_out’:
 drivers/scsi/qla4xxx/ql4_os.c:1865:24: warning: variable ‘sess’ set but not used [-Wunused-but-set-variable]
 1865 | struct iscsi_session *sess;
 | ^~~~
 drivers/scsi/qla4xxx/ql4_os.c: In function ‘qla4xxx_session_create’:
 drivers/scsi/qla4xxx/ql4_os.c:3079:19: warning: variable ‘dst_addr’ set but not used [-Wunused-but-set-variable]
 3079 | struct sockaddr *dst_addr;
 | ^~~~~~~~
 drivers/scsi/qla4xxx/ql4_os.c: In function ‘qla4_8xxx_iospace_config’:
 drivers/scsi/qla4xxx/ql4_os.c:5512:44: warning: variable ‘db_len’ set but not used [-Wunused-but-set-variable]
 5512 | unsigned long mem_base, mem_len, db_base, db_len;
 | ^~~~~~
 drivers/scsi/qla4xxx/ql4_os.c:5512:35: warning: variable ‘db_base’ set but not used [-Wunused-but-set-variable]
 5512 | unsigned long mem_base, mem_len, db_base, db_len;
 | ^~~~~~~
 drivers/scsi/qla4xxx/ql4_os.c: In function ‘qla4xxx_get_param_ddb’:
 drivers/scsi/qla4xxx/ql4_os.c:6269:24: warning: variable ‘ha’ set but not used [-Wunused-but-set-variable]
 6269 | struct scsi_qla_host *ha;
 | ^~

Link: https://lore.kernel.org/r/20200721164148.2617584-19-lee.jones@linaro.org
Cc: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/pm8001/pm80xx_hwi.c:918: warning: Function parameter or member 'number' not described in 'update_inbnd_queue_table'
 drivers/scsi/pm8001/pm80xx_hwi.c:954: warning: Function parameter or member 'number' not described in 'update_outbnd_queue_table'
 drivers/scsi/pm8001/pm80xx_hwi.c:1717: warning: Function parameter or member 'vec' not described in 'pm80xx_chip_interrupt_enable'
 drivers/scsi/pm8001/pm80xx_hwi.c:1735: warning: Function parameter or member 'vec' not described in 'pm80xx_chip_interrupt_disable'
 drivers/scsi/pm8001/pm80xx_hwi.c:4830: warning: Excess function parameter 'num' description in 'pm80xx_chip_phy_start_req'
 drivers/scsi/pm8001/pm80xx_hwi.c:4872: warning: Excess function parameter 'num' description in 'pm80xx_chip_phy_stop_req'
 drivers/scsi/pm8001/pm80xx_hwi.c:4892: warning: Function parameter or member 'pm8001_ha' not described in 'pm80xx_chip_reg_dev_req'
 drivers/scsi/pm8001/pm80xx_hwi.c:4892: warning: Function parameter or member 'pm8001_dev' not described in 'pm80xx_chip_reg_dev_req'
 drivers/scsi/pm8001/pm80xx_hwi.c:4892: warning: Function parameter or member 'flag' not described in 'pm80xx_chip_reg_dev_req'
 drivers/scsi/pm8001/pm80xx_hwi.c:4966: warning: Function parameter or member 'phyId' not described in 'pm80xx_chip_phy_ctl_req'
 drivers/scsi/pm8001/pm80xx_hwi.c:4966: warning: Function parameter or member 'phy_op' not described in 'pm80xx_chip_phy_ctl_req'
 drivers/scsi/pm8001/pm80xx_hwi.c:4966: warning: Excess function parameter 'num' description in 'pm80xx_chip_phy_ctl_req'
 drivers/scsi/pm8001/pm80xx_hwi.c:4966: warning: Excess function parameter 'phy_id' description in 'pm80xx_chip_phy_ctl_req'
 drivers/scsi/pm8001/pm80xx_hwi.c:5006: warning: Function parameter or member 'vec' not described in 'pm80xx_chip_isr'
 drivers/scsi/pm8001/pm80xx_hwi.c:5006: warning: Excess function parameter 'irq' description in 'pm80xx_chip_isr'
 drivers/scsi/pm8001/pm80xx_hwi.c:5006: warning: Excess function parameter 'stat' description in 'pm80xx_chip_isr'

Link: https://lore.kernel.org/r/20200721164148.2617584-18-lee.jones@linaro.org
Cc: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Provide lots of missing descriptions, remove some superfluous ones
(probably due to docrot) and demote one header which does not provide many
descriptions, and the ones it does provide are incorrect.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/pm8001/pm8001_hwi.c:339: warning: Function parameter or member 'number' not described in 'update_inbnd_queue_table'
 drivers/scsi/pm8001/pm8001_hwi.c:360: warning: Function parameter or member 'number' not described in 'update_outbnd_queue_table'
 drivers/scsi/pm8001/pm8001_hwi.c:480: warning: Function parameter or member 'interval' not described in 'mpi_set_open_retry_interval_reg'
 drivers/scsi/pm8001/pm8001_hwi.c:1238: warning: Function parameter or member 'int_vec_idx' not described in 'pm8001_chip_msix_interrupt_enable'
 drivers/scsi/pm8001/pm8001_hwi.c:1256: warning: Function parameter or member 'int_vec_idx' not described in 'pm8001_chip_msix_interrupt_disable'
 drivers/scsi/pm8001/pm8001_hwi.c:1270: warning: Function parameter or member 'vec' not described in 'pm8001_chip_interrupt_enable'
 drivers/scsi/pm8001/pm8001_hwi.c:1284: warning: Function parameter or member 'vec' not described in 'pm8001_chip_interrupt_disable'
 drivers/scsi/pm8001/pm8001_hwi.c:4508: warning: Excess function parameter 'num' description in 'pm8001_chip_phy_start_req'
 drivers/scsi/pm8001/pm8001_hwi.c:4544: warning: Excess function parameter 'num' description in 'pm8001_chip_phy_stop_req'
 drivers/scsi/pm8001/pm8001_hwi.c:4564: warning: Function parameter or member 'pm8001_ha' not described in 'pm8001_chip_reg_dev_req'
 drivers/scsi/pm8001/pm8001_hwi.c:4564: warning: Function parameter or member 'pm8001_dev' not described in 'pm8001_chip_reg_dev_req'
 drivers/scsi/pm8001/pm8001_hwi.c:4564: warning: Function parameter or member 'flag' not described in 'pm8001_chip_reg_dev_req'
 drivers/scsi/pm8001/pm8001_hwi.c:4624: warning: Function parameter or member 'pm8001_ha' not described in 'pm8001_chip_dereg_dev_req'
 drivers/scsi/pm8001/pm8001_hwi.c:4624: warning: Function parameter or member 'device_id' not described in 'pm8001_chip_dereg_dev_req'
 drivers/scsi/pm8001/pm8001_hwi.c:4650: warning: Function parameter or member 'phyId' not described in 'pm8001_chip_phy_ctl_req'
 drivers/scsi/pm8001/pm8001_hwi.c:4650: warning: Function parameter or member 'phy_op' not described in 'pm8001_chip_phy_ctl_req'
 drivers/scsi/pm8001/pm8001_hwi.c:4650: warning: Excess function parameter 'num' description in 'pm8001_chip_phy_ctl_req'
 drivers/scsi/pm8001/pm8001_hwi.c:4650: warning: Excess function parameter 'phy_id' description in 'pm8001_chip_phy_ctl_req'
 drivers/scsi/pm8001/pm8001_hwi.c:4687: warning: Function parameter or member 'vec' not described in 'pm8001_chip_isr'
 drivers/scsi/pm8001/pm8001_hwi.c:4687: warning: Excess function parameter 'irq' description in 'pm8001_chip_isr'
 drivers/scsi/pm8001/pm8001_hwi.c:4687: warning: Excess function parameter 'stat' description in 'pm8001_chip_isr'
 drivers/scsi/pm8001/pm8001_hwi.c:4727: warning: Function parameter or member 'pm8001_ha' not described in 'pm8001_chip_abort_task'
 drivers/scsi/pm8001/pm8001_hwi.c:4727: warning: Function parameter or member 'pm8001_dev' not described in 'pm8001_chip_abort_task'
 drivers/scsi/pm8001/pm8001_hwi.c:4727: warning: Function parameter or member 'task_tag' not described in 'pm8001_chip_abort_task'
 drivers/scsi/pm8001/pm8001_hwi.c:4727: warning: Function parameter or member 'cmd_tag' not described in 'pm8001_chip_abort_task'
 drivers/scsi/pm8001/pm8001_hwi.c:4727: warning: Excess function parameter 'task' description in 'pm8001_chip_abort_task'
 drivers/scsi/pm8001/pm8001_hwi.c:4966: warning: Function parameter or member 'tag' not described in 'pm8001_chip_fw_flash_update_build'

Link: https://lore.kernel.org/r/20200721164148.2617584-17-lee.jones@linaro.org
Cc: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Also remove 'tstate' which became unused after this patch.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/aic7xxx/aic79xx_core.c: In function ‘ahd_handle_seqint’:
 drivers/scsi/aic7xxx/aic79xx_core.c:1907:32: warning: variable ‘targ_info’ set but not used [-Wunused-but-set-variable]
 1907 | struct ahd_initiator_tinfo *targ_info;
 | ^~~~~~~~~
 drivers/scsi/pm8001/pm8001_hwi.c: In function ‘mpi_set_phys_g3_with_ssc’:
 drivers/scsi/pm8001/pm8001_hwi.c:413:6: warning: variable ‘value’ set but not used [-Wunused-but-set-variable]
 413 | u32 value, offset, i;
 | ^~~~~

Link: https://lore.kernel.org/r/20200721164148.2617584-16-lee.jones@linaro.org
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

'qla4_83xx_reg_tbl' is only used in 'drivers/scsi/qla4xxx/ql4_os.c', move
it there.

Fixes the following W=1 kernel build warning(s):

 In file included from drivers/scsi/qla4xxx/ql4_def.h:46,
 from drivers/scsi/qla4xxx/ql4_init.c:9:
 At top level:
 drivers/scsi/qla4xxx/ql4_83xx.h:90:23: warning: ‘qla4_83xx_reg_tbl’ defined but not used [-Wunused-const-variable=]
 90 | static const uint32_t qla4_83xx_reg_tbl[] = {
 | ^~~~~~~~~~~~~~~~~
 In file included from drivers/scsi/qla4xxx/ql4_def.h:46,
 from drivers/scsi/qla4xxx/ql4_mbx.c:9:
 drivers/scsi/qla4xxx/ql4_83xx.h:90:23: warning: ‘qla4_83xx_reg_tbl’ defined but not used [-Wunused-const-variable=]
 90 | static const uint32_t qla4_83xx_reg_tbl[] = {
 | ^~~~~~~~~~~~~~~~~
 [...]
 NB: Lots of these - snipped for brevity.

Link: https://lore.kernel.org/r/20200721164148.2617584-15-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

pci_set_mwi() has 'warn_unused_result' so the result should be checked.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/qla4xxx/ql4_init.c: In function ‘qla4xxx_pci_config’:
 drivers/scsi/qla4xxx/ql4_init.c:664:6: warning: variable ‘status’ set but not used [-Wunused-but-set-variable]

And if 'status' is removed:

 drivers/scsi/qla4xxx/ql4_init.c: In function ‘qla4xxx_pci_config’:
 drivers/scsi/qla4xxx/ql4_init.c:666:2: warning: ignoring return value of ‘pci_set_mwi’, declared with attribute warn_unused_result [-Wunused-result]
 666 | pci_set_mwi(ha->pdev);
 | ^~~~~~~~~~~~~~~~~~~~~

Link: https://lore.kernel.org/r/20200721164148.2617584-14-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/qla4xxx/ql4_init.c: In function ‘ql4xxx_set_mac_number’:
 drivers/scsi/qla4xxx/ql4_init.c:17:10: warning: variable ‘func_number’ set but not used [-Wunused-but-set-variable]

Link: https://lore.kernel.org/r/20200721164148.2617584-13-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Clean-up some whitespace issues too whilst we're here.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/pm8001/pm8001_ctl.c:102: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_fw_version_show'
 drivers/scsi/pm8001/pm8001_ctl.c:331: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_logging_level_show'
 drivers/scsi/pm8001/pm8001_ctl.c:400: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_ib_queue_log_show'
 drivers/scsi/pm8001/pm8001_ctl.c:433: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_ob_queue_log_show'
 drivers/scsi/pm8001/pm8001_ctl.c:464: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_bios_version_show'
 drivers/scsi/pm8001/pm8001_ctl.c:623: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_gsm_log_show'

Link: https://lore.kernel.org/r/20200721164148.2617584-12-lee.jones@linaro.org
Cc: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Functions must follow directly after the header that documents them.

Fixes the following W=1 kernel build warning(s):

from  drivers/scsi/pm8001/pm8001_sas.c:41:
inlined from ‘pm8001_issue_ssp_tmf’ at  drivers/scsi/pm8001/pm8001_sas.c:919:2:
 drivers/scsi/pm8001/pm8001_sas.c:379: warning: Function parameter or member 'pm8001_dev' not described in 'DEV_IS_GONE'
 drivers/scsi/pm8001/pm8001_sas.c:379: warning: Excess function parameter 'task' description in 'DEV_IS_GONE'
 drivers/scsi/pm8001/pm8001_sas.c:379: warning: Excess function parameter 'num' description in 'DEV_IS_GONE'
 drivers/scsi/pm8001/pm8001_sas.c:379: warning: Excess function parameter 'gfp_flags' description in 'DEV_IS_GONE'
 drivers/scsi/pm8001/pm8001_sas.c:379: warning: Excess function parameter 'is_tmf' description in 'DEV_IS_GONE'
 drivers/scsi/pm8001/pm8001_sas.c:379: warning: Excess function parameter 'tmf' description in 'DEV_IS_GONE'
 drivers/scsi/pm8001/pm8001_sas.c:583: warning: Function parameter or member 'device_id' not described in 'pm8001_find_dev'
 drivers/scsi/pm8001/pm8001_sas.c:1000: warning: Function parameter or member 'dev' not described in 'pm8001_I_T_nexus_reset'

Link: https://lore.kernel.org/r/20200721164148.2617584-11-lee.jones@linaro.org
Cc: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Kerneldoc expects attributes/parameters to be in '@*.: ' format.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/aic94xx/aic94xx_tmf.c:685: warning: Function parameter or member 'task' not described in 'asd_query_task'

Link: https://lore.kernel.org/r/20200721164148.2617584-9-lee.jones@linaro.org
Cc: Luben Tuikov <luben_tuikov@adaptec.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'p2' not described in 'src_sync_cmd'
 drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'p3' not described in 'src_sync_cmd'
 drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'p4' not described in 'src_sync_cmd'
 drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'p5' not described in 'src_sync_cmd'
 drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'p6' not described in 'src_sync_cmd'
 drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'status' not described in 'src_sync_cmd'
 drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'r1' not described in 'src_sync_cmd'
 drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'r2' not described in 'src_sync_cmd'
 drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'r3' not described in 'src_sync_cmd'
 drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'r4' not described in 'src_sync_cmd'
 drivers/scsi/aacraid/src.c:203: warning: Excess function parameter 'ret' description in 'src_sync_cmd'
 drivers/scsi/aacraid/src.c:609: warning: Function parameter or member 'dev' not described in 'aac_src_ioremap'
 drivers/scsi/aacraid/src.c:639: warning: Function parameter or member 'dev' not described in 'aac_srcv_ioremap'

Link: https://lore.kernel.org/r/20200721164148.2617584-8-lee.jones@linaro.org
Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com>
Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Kerneldoc expects attributes/parameters to be in '@*.: ' format.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/aic94xx/aic94xx_dev.c:246: warning: Function parameter or member 'dev' not described in 'asd_init_sata_pm_port_ddb'
 drivers/scsi/aic94xx/aic94xx_dev.c:290: warning: Function parameter or member 'dev' not described in 'asd_init_sata_pm_ddb'

Link: https://lore.kernel.org/r/20200721164148.2617584-7-lee.jones@linaro.org
Cc: Luben Tuikov <luben_tuikov@adaptec.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/aacraid/nark.c:31: warning: Function parameter or member 'dev' not described in 'aac_nark_ioremap'

Link: https://lore.kernel.org/r/20200721164148.2617584-6-lee.jones@linaro.org
Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com>
Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

And clean-up a couple of whitespace issues while we're here.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/aacraid/rkt.c:64: warning: Function parameter or member 'dev' not described in 'aac_rkt_ioremap'

Link: https://lore.kernel.org/r/20200721164148.2617584-5-lee.jones@linaro.org
Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com>
Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>