- 23 Jun, 2021 10 commits
-
-
Takashi Iwai authored
HP Dragonfly G1 (SSID 103c:861f) also requires the same quirk for the mute and mic-mute LED just as Dragonfly G2 model. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213329 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210623122022.26179-1-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
Takashi Sakamoto authored
After further investigation, I find out some mistakes for 896 about its register. This commit fixes it. Fixes: b431f16f ("ALSA: firewire-motu: add support for MOTU 896") Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210623075941.72562-10-o-takashi@sakamocchi.jpSigned-off-by:
-
Takashi Sakamoto authored
After further investigation, I find out some mistakes for 828 about its register. This commit fixes it. Fixes: d13d6b28 ("ALSA: firewire-motu: add support for MOTU 828") Signed-off-by:
-
Takashi Sakamoto authored
This commit adds a series of macro for source of sampling clock in version 3 protocol. Signed-off-by:
-
Takashi Sakamoto authored
Current implementation of driver has two similar helper functions for source detection of sampling clock. This commit merges them as a code refactoring. Signed-off-by:
-
Takashi Sakamoto authored
Current implementation of driver has several similar helper functions for packet format detection in protocol version 2. This commit merges them as code refactoring. Signed-off-by:
-
Takashi Sakamoto authored
This commit adds a series of macro for source of sampling clock in version 2 protocol. Signed-off-by:
-
Takashi Sakamoto authored
Although MOTU Traveler supports AES/EBU source for sampling clock, current implementation of driver doesn't code it. This commit adds support for AES/EBU source in protocol version 2. Signed-off-by:
-
Takashi Sakamoto authored
Current implementation of driver has two similar helper functions for source detection of sampling clock. This commit merges them as a code refactoring. Signed-off-by:
-
Takashi Sakamoto authored
The devices in protocol version 2 has a register with flag for IEC 60958 signal detection as source of sampling clock without discrimination between coaxial and optical interfaces. On the other hand, current implementation of driver manage to interpret type of signal on optical interface instead. This commit fixes the detection of optical/coaxial interface for S/PDIF signal. Signed-off-by:
-
- 22 Jun, 2021 30 commits
-
-
Geoffrey D. Bennett authored
Add Focusrite Scarlett Gen 2/3 Mixer Driver entry. Signed-off-by:
Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/20210622171724.GA15534@m.b4.vuSigned-off-by:
-
Geoffrey D. Bennett authored
Add support for the talkback feature of the 18i20 Gen 3. Co-developed-by:
Vladimir Sadovnikov <sadko4u@gmail.com> Signed-off-by:
-
Geoffrey D. Bennett authored
For configuration items with a size of 16, scarlett2_usb_get_config() was filling *buf with little-endian data. Update it to convert to CPU endian. This function is not currently used so affects nothing yet; will be used by the upcoming talkback feature. Signed-off-by:
-
Geoffrey D. Bennett authored
The 18i8 and 18i20 Gen 3 support "speaker switching". Add a Speaker Switch control which can be set to Off/Main/Alt. When speaker switching is enabled or disabled, the interface may change the state of the Analog Outputs 3 and 4 routing and the global mute button, so use a flag private->speaker_switching_switched to note that those should be checked when the next "monitor other" notification is received. Signed-off-by:
-
Geoffrey D. Bennett authored
Enabling/disabling speaker switching will update the mux configuration. To prepare for this, add a private->mux_updated flag and update the scarlett2_mux_src_enum_ctl_get() callback to check it. Signed-off-by:
-
Geoffrey D. Bennett authored
Save the struct snd_kcontrol pointers for the sw_hw and mux controls. This is in preparation for speaker switching support which needs to be able to update those controls. Signed-off-by:
-
Geoffrey D. Bennett authored
Split part of scarlett2_sw_hw_enum_ctl_put() out into scarlett2_sw_hw_change() so that the code which actually makes the change is available in its own function. This will be used by the speaker switching support which needs to set the SW/HW switch to HW when speaker switching is enabled. Signed-off-by:
-
Geoffrey D. Bennett authored
The 18i8 Gen 3 analogue 7/8 outputs are identified as line 3/4 on the rear of the unit. Add support for remapping the channel numbers to match the labelling. Signed-off-by:
-
Geoffrey D. Bennett authored
The Solo and 2i2 devices don't have a mixer but they do have a "direct monitor" switch. Add support for getting and setting the state of this switch. Co-developed-by:
-
Geoffrey D. Bennett authored
Some inputs on Gen 3 models support software-selectable phantom power. Add support for getting and setting the state of those switches and the "Phantom Power Persistence" switch. Co-developed-by:
-
Geoffrey D. Bennett authored
Some inputs on Gen 3 models have an "air" feature which can be enabled from the driver or (model-dependent) from the front panel. Add support for getting and setting the state of those switches. Signed-off-by:
-
Geoffrey D. Bennett authored
Add initial support for the Focusrite Scarlett Solo and 2i2 devices: - They have no mixer - They don't support reporting sync status or levels - The configuration space is laid out differently to the other models - There is no level (line/inst) switch on input 1 of the Solo Co-developed-by:
-
Geoffrey D. Bennett authored
Add support for accessing configuration values when multiple values are stored in one byte. Needed by the upcoming Solo and 2i2 Gen 3 support. Signed-off-by:
-
Geoffrey D. Bennett authored
Move scarlett2_usb_get() and scarlett2_usb_get_config() above the functions relating to updating the configuration so that scarlett2_usb_set_config() can call scarlett2_usb_get() in a subsequent patch. Signed-off-by:
-
Geoffrey D. Bennett authored
Add a control to disable the Gen 3 MSD mode so that the full functionality of the device is available. Don't create the other controls until MSD mode is disabled. Signed-off-by:
-
Geoffrey D. Bennett authored
Some models allow the level and pad settings to be controlled from the front-panel of the device. For these, the device will send an "input-other" notification to prompt the driver to re-read the status of those settings. Signed-off-by:
-
Geoffrey D. Bennett authored
Add mixer support for the Focusrite Scarlett 4i4, 8i6, 18i8, and 18i20 Gen 3 devices. Signed-off-by:
-
Takashi Iwai authored
The current way of the scarlett2 mixer code managing the usb_mixer_elem_info object is wrong in two ways: it passes its internal index to the head.id field, and the val_type field is uninitialized. This ended up with the wrong execution at the resume because a bogus unit id is passed wrongly. Also, in the later code extensions, we'll have more mixer elements, and passing the index will overflow the unit id size (of 256). This patch corrects those issues. It introduces a new value type, USB_MIXER_BESPOKEN, which indicates a non-standard mixer element, and use this type for all scarlett2 mixer elements, as well as initializing the fixed unit id 0 for avoiding the overflow. Tested-by:
-
Geoffrey D. Bennett authored
The Level Meter control had a fixed number of channels and therefore only worked with the 18i20 Gen 2. Fix the control to contain the correct number of channels. Signed-off-by:
-
Geoffrey D. Bennett authored
The scarlett2_ports struct contains both generic (hardware IDs and descriptions) and model-specific (port count) data. Remove the generic data from the scarlett2_device_info struct so it is not repeated for every model. Signed-off-by:
-
Geoffrey D. Bennett authored
Some Gen 3 devices do not put all of the mux entries for the same port types together in order in the "set mux" message data. To prepare for this, replace the struct scarlett2_ports num[] array and the assignment_order[] array with mux_assignment[], a list of port types and ranges that is defined in the struct scarlett2_device_info. Signed-off-by:
-
Geoffrey D. Bennett authored
For each analogue output, in addition to the output volume (gain) control, the hardware also has a mute control. Add ALSA mute controls for each analogue output. If the device has the line_out_hw_vol feature, then the mute control is disabled along with the output volume control when the switch is set to HW. Signed-off-by:
-
Geoffrey D. Bennett authored
Add helper function for setting the read/write status of a volume control. This will simplify the upcoming mute control support. Signed-off-by:
-
Geoffrey D. Bennett authored
Document the fields of struct scarlett2_device_info in the definition of the struct, not in each instantiation. Signed-off-by:
-
Geoffrey D. Bennett authored
The info variable is not used by snd_scarlett_gen2_init() except to pass it to snd_scarlett_gen2_controls_create(), so move the lookup into that function. Signed-off-by:
-
Geoffrey D. Bennett authored
Add the USB device ID to the scarlett2_device_info struct so that the switch statement which finds the appropriate struct can be replaced with a loop that looks through an array of pointers to those structs. Suggested-by:
-
Geoffrey D. Bennett authored
Use designated initializers and merge lines in preparation for more configuration items coming soon. Signed-off-by:
-
Geoffrey D. Bennett authored
Use a common sprintf() format for the mixer element names generated in scarlett2_add_line_in_ctls() in preparation for more of them. Signed-off-by:
-
Geoffrey D. Bennett authored
Add "Sync Status" control to display the sync locked/unlocked status. Signed-off-by:
-
Geoffrey D. Bennett authored
Always enable interrupt polling as every model has some sort of status to report. Signed-off-by:
-
