- 04 Jul, 2018 1 commit
-
-
Sebastian Ott authored
Add support for format 3 function measurement blocks. Signed-off-by:
Sebastian Ott <sebott@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
- 02 Jul, 2018 26 commits
-
-
Vasily Gorbik authored
Since decompressor cflags and aflags are made from scratch add extra debug flags when CONFIG_DEBUG_INFO is enabled. Also adds support for CONFIG_DEBUG_INFO_DWARF4 option. Acked-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
-
Vasily Gorbik authored
Adding *.o.chkbss files to targets list makes sure that the kbuild is aware of them and removes them during make clean. Also remove *.o.chkbss file before an actual check, to avoid having stale *.o.chkbss file left even if the check is failed. Acked-by:
-
Vasily Gorbik authored
startup.a build rule packs a list of prerequisites into archive. That didn't take into account extra prerequisites added by chkbss, so that zero length *.o.chkbss files were also packed into the archive. To avoid that filter only real object from prerequisites list. Acked-by:
-
Vasily Gorbik authored
Correct merging error which replaced startup.a in targets list with non-existing setup.a. Due to missing startup.a in targets list if_changed triggered startup.a rebuild unconditionally. Fixes: 3e200c54438d ("s390/decompressor: avoid reusing uncompressed image objects") Acked-by: -
Heiko Carstens authored
Get rid of this compile warning for !PROC_FS: CC arch/s390/kernel/sysinfo.o arch/s390/kernel/sysinfo.c:275:12: warning: 'sysinfo_show' defined but not used [-Wunused-function] static int sysinfo_show(struct seq_file *m, void *v) Signed-off-by:
-
Vasily Gorbik authored
Replace strncpy which has been used to copy a substring into buf without NUL-termination with memcpy to avoid the following gcc 8 warnings: arch/s390/tools/gen_opcode_table.c: In function ‘add_to_group.isra.4’: arch/s390/tools/gen_opcode_table.c:260:2: warning: ‘strncpy’ output may be truncated copying 2 bytes from a string of length 19 [-Wstringop-truncation] strncpy(group->opcode, insn->opcode, 2); In function ‘print_opcode_table’, inlined from ‘main’ at arch/s390/tools/gen_opcode_table.c:333:2: arch/s390/tools/gen_opcode_table.c:286:4: warning: ‘strncpy’ output may be truncated copying 2 bytes from a string of length 19 [-Wstringop-truncation] strncpy(opcode, insn->opcode, 2); Reviewed-by: -
Vasily Gorbik authored
Since the plain vmlinux ELF file no longer carries all necessary parts for starting up (like the entry point and decompressor), add a check which would block boot process and encourage users to use bzImage or arch/s390/boot/compressed/vmlinux instead. The check relies on s390 linux entry point ABI definition, which is only present in bzImage and arch/s390/boot/compressed/vmlinux. Reported-by:
Guenter Roeck <linux@roeck-us.net> Tested-by:
Cornelia Huck <cohuck@redhat.com> Acked-by:
Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by:
-
Vasily Gorbik authored
The following gcc warning is issued for strncpy which is used to deliberately avoid string NUL-termination. Reuse memcpy to avoid the warning. inlined from 'monwrite_diag' at drivers/s390/char/monwriter.c:64:2: ./include/linux/string.h:246:9: warning: '__builtin_strncpy' output truncated before terminating nul copying 7 bytes from a string of the same length [-Wstringop-truncation] Reviewed-by:Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by:
-
Vasily Gorbik authored
Replace strncpy which is used to deliberately avoid string NUL-termination with memcpy. This allows to get rid of gcc 8 stringop-truncation warning: inlined from 'ext_to_int_kekl' at drivers/s390/char/tape_3590.c:123:2: ./include/linux/string.h:246:9: warning: '__builtin_strncpy' output may be truncated copying 64 bytes from a string of length 64 [-Wstringop-truncation] Also replaces "for" loop on memset. Reviewed-by: -
Vasily Gorbik authored
Use strlcpy to make sure strings are NUL-terminated. Fixes the following gcc 8 warning: inlined from 'register_tape_dev' at drivers/s390/char/tape_class.c:57:2: ./include/linux/string.h:246:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation] Acked-by:
-
Vasily Gorbik authored
Aligning struct lowcore to double page size allows to get rid of this gcc warning: In file included from ./arch/s390/include/asm/setup.h:56, from ./arch/s390/include/asm/page.h:36, from ./arch/s390/include/asm/user.h:11, from ./include/linux/user.h:1, from ./include/linux/elfcore.h:5, from ./include/linux/crash_core.h:6, from ./include/linux/kexec.h:18, from arch/s390/purgatory/purgatory.c:10: ./arch/s390/include/asm/lowcore.h:189:1: warning: alignment 1 of 'struct lowcore' is less than 8 [-Wpacked-not-aligned] } __packed; Acked-by: -
Vasily Gorbik authored
The following linker construct is problematic with linkers of binutils < 2.28: EXCLUDE_FILE (*piggy.o) *(.rodata.*) from 8f1732fc2a11dc of binutils: "though the linker accepts this without complaint the EXCLUDE_FILE part is silently ignored and has no effect." Silent ignoring of EXCLUDE_FILE construct made .rodata.compressed be part of .rodata, and in case of .rodata.compressed following some unaligned data, input_len would also become unaligned. from arch/s390/boot/compressed/vmlinux.map: .rodata.compressed 0x0000000000012fea 0x4d57e7 arch/s390/boot/compressed/piggy.o 0x0000000000012fea input_len 0x0000000000012fee input_data input_len is later used here: arch/s390/boot/compressed/misc.c:113 __decompress(input_data, input_len, NULL, NULL, output, 0, NULL, error); asm generated by gcc looks like: .loc 3 113 0 egfrl %r11,input_len from what assembler generates invalid (the second operand must be aligned on a doubleword boundary): 0x00000000000129b4 <+148>: c4 bc 00 00 03 1b lgfrl %r11,0x12fea hence specification exception is recognized. To avoid an issue use EXCLUDE_FILE construct which is recognized by older linkers (since at least binutils-2_11) *(EXCLUDE_FILE (*piggy.o) .rodata.compressed) Also ensure that .rodata.compressed is at least doubleword aligned. Fixes: 89b5202e ("s390/decompressor: support uncompressed kernel") Reported-by:Halil Pasic <pasic@linux.ibm.com> Acked-by:
-
Vasily Gorbik authored
Since the uncompressed image .text section starts at 0x100000 now there is no need to redefine _text to something else to make perf happy. Reviewed-by:
-
Vasily Gorbik authored
Avoid unnecessary rewrite of psw and merge _stext into startup_continue. This allows to move _stext definition to vmlinux.lds.S, where _etext is also defined and set _stext to the actual beginning of .text at 0x100000. This fixes the problem with setting the last .text page as not-executable due to vmem_map_init relying on page alinged _stext and _etext. Fixes: bd79d663 ("s390/decompressor: trim the kernel image up to 1M") Reported-by:
Nils Hoppmann <niho@de.ibm.com> Reviewed-by:
-
Vasily Gorbik authored
Instead of generating uncompressed kernel image starting at 0, filling first mb with zeros (with ".org 0x100000") and then trimming it off from vmlinux.bin before compression, simply generate a kernel image starting from 0x100000. Reviewed-by:
-
Vasily Gorbik authored
Since startup code now reserves memory ranges [0, PARMAREA_END] and [_stext, <end of kernel>] _ehead symbol is not used and could be cleaned up. Reviewed-by:
-
Vasily Gorbik authored
Currently none of the vmlinux linker script patterns in .text section match expoline execute-trampolines, and they end up as separate sections: .text.__s390_indirect_jump_r1, .text.__s390x_indirect_jump_r1use_r9, .text.__s390x_indirect_branch_4_1use_6, ... Add a pattern to match them all. Reviewed-by:
-
Vasily Gorbik authored
___kcrctab section is not used during the decompressor phase and could be discarded to save the memory. It is currently generated due to lib/mem.S usage, which exports few symbols. Acked-by:
-
Harald Freudenberger authored
There have been identified some places in the zcrypt device driver where copy_from_user() is called but the length value is not explicitly checked. So now some plausibility checks and comments have been introduced there. Signed-off-by:
Harald Freudenberger <freude@linux.ibm.com> Acked-by:
-
Vasily Gorbik authored
arch/s390/kernel/perf_regs.c:36:19: warning: array subscript 16 is above array bounds of 'long unsigned int[16]' [-Warray-bounds] return regs->gprs[idx]; gcc tries to be smart here and since there is a condition: if (idx >= PERF_REG_S390_R0 && idx <= PERF_REG_S390_R15) return regs->gprs[idx]; which covers all possible array subscripts, it gives the warning for the last function return statement: return regs->gprs[idx]; which in presence of that condition does not really make sense and should be replaced with "return 0;" Also move WARN_ON_ONCE((u32)idx >= PERF_REG_S390_MAX) to the end of the function. Reviewed-by:
Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by:
-
Vasily Gorbik authored
arch/s390/kernel/topology.c:591:3: warning: 'strncpy' output truncated before terminating nul copying 2 bytes from a string of the same length [-Wstringop-truncation] strncpy(buf, topology_is_enabled() ? "1\n" : "0\n", ARRAY_SIZE(buf)); arch/s390/appldata/appldata_base.c:326:3: warning: 'strncpy' output truncated before terminating nul copying 2 bytes from a string of the same length [-Wstringop-truncation] strncpy(buf, ops->active ? "1\n" : "0\n", ARRAY_SIZE(buf)); arch/s390/appldata/appldata_base.c:217:3: warning: 'strncpy' output truncated before terminating nul copying 2 bytes from a string of the same length [-Wstringop-truncation] strncpy(buf, appldata_timer_active ? "1\n" : "0\n", ARRAY_SIZE(buf)); To avoid the warning, just reuse memcpy. Reviewed-by:
-
Vasily Gorbik authored
drivers/s390/block/dasd_alias.c:711:2: warning: 'strncpy' output truncated before terminating nul copying 4 bytes from a string of the same length [-Wstringop-truncation] strncpy((char *) &cqr->magic, "ECKD", 4); Replace strncpy to int as a buffer with memcpy. Acked-by:
Stefan Haberland <sth@linux.ibm.com> Reviewed-by:
-
Vasily Gorbik authored
ccw "busid" should always be NUL-terminated, as evident from e.g. get_ccwdev_by_busid doing "return (strcmp(bus_id, dev_name(dev)) == 0)". Replace all strncpy initializing busid with strlcpy. This fixes the following gcc 8 warnings: drivers/s390/scsi/zfcp_aux.c:104:2: warning: 'strncpy' specified bound 20 equals destination size [-Wstringop-truncation] strncpy(busid, token, ZFCP_BUS_ID_SIZE); drivers/s390/block/dasd_eer.c:316:2: warning: 'strncpy' specified bound 10 equals destination size [-Wstringop-truncation] strncpy(header.busid, dev_name(&device->cdev->dev), DASD_EER_BUSID_SIZE); drivers/s390/block/dasd_eer.c:359:2: warning: 'strncpy' specified bound 10 equals destination size [-Wstringop-truncation] strncpy(header.busid, dev_name(&device->cdev->dev), DASD_EER_BUSID_SIZE); drivers/s390/block/dasd_devmap.c:429:3: warning: 'strncpy' specified bound 20 equals destination size [-Wstringop-truncation] strncpy(new->bus_id, bus_id, DASD_BUS_ID_SIZE); Acked-by:
Steffen Maier <maier@linux.ibm.com> Reviewed-by:
-
Vasily Gorbik authored
arch/s390/mm/extmem.c: In function '__segment_load': arch/s390/mm/extmem.c:436:2: warning: 'strncat' specified bound 7 equals source length [-Wstringop-overflow=] strncat(seg->res_name, " (DCSS)", 7); What gcc complains about here is the misuse of strncat function, which in this case does not limit a number of bytes taken from "src", so it is in the end the same as strcat(seg->res_name, " (DCSS)"); Keeping in mind that a res_name is 15 bytes, strncat in this case would overflow the buffer and write 0 into alignment byte between the fields in the struct. To avoid that increasing res_name size to 16, and reusing strlcat. Reviewed-by:
-
Vasily Gorbik authored
The numa_node field of the tag_set struct has to be explicitly initialized, otherwise it stays as 0, which is a valid numa node id and cause memory allocation failure if node 0 is offline. Acked-by:
-
Vasily Gorbik authored
The numa_node field of the tag_set struct has to be explicitly initialized, otherwise it stays as 0, which is a valid numa node id and cause memory allocation failure if node 0 is offline. Acked-by:
-
- 25 Jun, 2018 13 commits
-
-
Martin Schwidefsky authored
Add the zcrypt base patches into features using a tip branch for parallel merging via multiple tress.
-
Harald Freudenberger authored
Move all the inline functions from the ap bus header file ap_asm.h into the in-kernel api header file arch/s390/include/asm/ap.h so that KVM can make use of all the low level AP functions. Signed-off-by:
Harald Freudenberger <freude@de.ibm.com> Signed-off-by:
-
Harald Freudenberger authored
Show the current load value of cards and queues in sysfs. The load value for each card and queue is maintained by the zcrypt device driver for dispatching and load balancing requests over the available devices. This patch provides the load value to userspace via a new read only sysfs attribute 'load' per card and queue. Signed-off-by:
-
Harald Freudenberger authored
Reviewed and adapted the register use and asm constraints of the C inline assembler functions in accordance to the the AP instructions specifications. Signed-off-by:
-
Harald Freudenberger authored
Added new inline function ap_pqap_zapq() which is a C inline function wrapper for the AP PQAP(ZAPQ) instruction. Signed-off-by:
-
Vasily Gorbik authored
Introduce PARMAREA_END, and use it for memblock reserve of low memory, which is used for lowcore, kdump data mover code and page buffer, early stack and parmarea. There is no need to reserve an area between PARMAREA_END and the decompressor _ehead. Reviewed-by:
-
Arnd Bergmann authored
time_t and get_seconds() are deprecated because they will overflow on 32-bit architectures in the future. This is not a problem on 64-bit s390, but we should use proper interfaces anyway. Besides moving to the time64_t based interface, the CLOCK_MONOTONIC based ktime_get_seconds() is preferred for kernel internal timekeeping because it does not behave in unexpected ways during leap second changes or settimeofday() calls. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Vasily Gorbik authored
Implement uncompressed kernel support (when "None" is picked in kernel compression mode list). In that case an actual decompression code is skipped and control is passed from boot/head.S to startup_continue in kernel/head64.S. To achieve that uncompressed kernel payload is conditionally put at 0x100000 in bzImage. In reality this is very close to classic uncompressed kernel "image", but the decompressor has its own build and link process, kernel/head64.S lives at 0x100000 rather than at 0x11000, and .bss section is reused for both stages. Reviewed-by:
-
Vasily Gorbik authored
Add "None" as the kernel compression mode. This option is useful for debugging the kernel in slow simulation environments, where decompressing and moving the kernel is awfully slow. Uncompressed kernel implementation might allow early boot code to skip the decompressor and jump right at uncompressed kernel image entry point. Platforms implementing that should define HAVE_KERNEL_UNCOMPRESSED. Reviewed-by:
-
Vasily Gorbik authored
If none of compression methods defined, leave suffix-y empty, so that plain uncompressed vmlinux.bin could be reused instead. Reviewed-by:
-
Vasily Gorbik authored
Rename vmlinux.scr to vmlinux.scr.lds.S and add it to build rules to enable preprocessor for it. Also add vmlinux.scr.lds to local .gitignore Reviewed-by:
-
Vasily Gorbik authored
Cover the decompressor code with no .bss usage compile time check. Reviewed-by:
-
Vasily Gorbik authored
"chkbss-target" could be now used to override default target .bss check is bound to. Objects to be checked are only path extended when needed. Reviewed-by:
-
