1. 20 May, 2011 4 commits
  2. 14 May, 2011 5 commits
    • Igor Plyatov's avatar
      pata_at91: SMC settings calculation bugfixes, support for t6z and IORDY · 0144261f
      Igor Plyatov authored
      * New code correctly calculates SMC registers values, adjusts calculated
        to admissible ranges, enlarges cycles when required and converts values
        into SMC's format.
      * Support for TDF cycles (ATA t6z) and IORDY line added.
      * Eliminate need in the initial_timing structure.
      * Code cleanup.
      Signed-off-by: default avatarIgor Plyatov <plyatov@gmail.com>
      Signed-off-by: default avatarJeff Garzik <jgarzik@pobox.com>
      0144261f
    • James Bottomley's avatar
      libata-sff: prevent irq descriptions for dummy ports · af649a1b
      James Bottomley authored
      This is a cosmetic change to prevent libata-sff adding irq
      descriptions to dummy ports, since the information, while largely
      unused, is erroneous.
      Signed-off-by: default avatarJames Bottomley <James.Bottomley@suse.de>
      Signed-off-by: default avatarJeff Garzik <jgarzik@pobox.com>
      af649a1b
    • James Bottomley's avatar
      pata_cm64x: fix boot crash on parisc · 9281b16c
      James Bottomley authored
      The old IDE cmd64x checks the status of the CNTRL register to see if
      the ports are enabled before probing them.  pata_cmd64x doesn't do
      this, which causes a HPMC on parisc when it tries to poke at the
      secondary port because apparently the BAR isn't wired up (and a
      non-responding piece of memory causes a HPMC).
      
      Fix this by porting the CNTRL register port detection logic from IDE
      cmd64x.  In addition, following converns from Alan Cox, add a check to
      see if a mobility electronics bridge is the immediate parent and forgo
      the check if it is (prevents problems on hotplug controllers).
      Signed-off-by: default avatarJames Bottomley <James.Bottomley@suse.de>
      Signed-off-by: default avatarJeff Garzik <jgarzik@pobox.com>
      9281b16c
    • Tejun Heo's avatar
      libata: fix oops when LPM is used with PMP · 5f6f12cc
      Tejun Heo authored
      ae01b249 (libata: Implement ATA_FLAG_NO_DIPM and apply it to mcp65)
      added ATA_FLAG_NO_DIPM and made ata_eh_set_lpm() check the flag.
      However, @ap is NULL if @link points to a PMP link and thus the
      unconditional @ap->flags dereference leads to the following oops.
      
        BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
        IP: [<ffffffff813f98e1>] ata_eh_recover+0x9a1/0x1510
        ...
        Pid: 295, comm: scsi_eh_4 Tainted: P            2.6.38.5-core2 #1 System76, Inc. Serval Professional/Serval Professional
        RIP: 0010:[<ffffffff813f98e1>]  [<ffffffff813f98e1>] ata_eh_recover+0x9a1/0x1510
        RSP: 0018:ffff880132defbf0  EFLAGS: 00010246
        RAX: 0000000000000000 RBX: ffff880132f40000 RCX: 0000000000000000
        RDX: ffff88013377c000 RSI: ffff880132f40000 RDI: 0000000000000000
        RBP: ffff880132defce0 R08: ffff88013377dc58 R09: ffff880132defd98
        R10: 0000000000000000 R11: 00000000ffffffff R12: 0000000000000000
        R13: 0000000000000000 R14: ffff88013377c000 R15: 0000000000000000
        FS:  0000000000000000(0000) GS:ffff8800bf700000(0000) knlGS:0000000000000000
        CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
        CR2: 0000000000000018 CR3: 0000000001a03000 CR4: 00000000000406e0
        DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
        DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
        Process scsi_eh_4 (pid: 295, threadinfo ffff880132dee000, task ffff880133b416c0)
        Stack:
         0000000000000000 ffff880132defcc0 0000000000000000 ffff880132f42738
         ffffffff813ee8f0 ffffffff813eefe0 ffff880132defd98 ffff88013377f190
         ffffffffa00b3e30 ffffffff813ef030 0000000032defc60 ffff880100000000
        Call Trace:
         [<ffffffff81400867>] sata_pmp_error_handler+0x607/0xc30
         [<ffffffffa00b273f>] ahci_error_handler+0x1f/0x70 [libahci]
         [<ffffffff813faade>] ata_scsi_error+0x5be/0x900
         [<ffffffff813cf724>] scsi_error_handler+0x124/0x650
         [<ffffffff810834b6>] kthread+0x96/0xa0
         [<ffffffff8100cd64>] kernel_thread_helper+0x4/0x10
        Code: 8b 95 70 ff ff ff b8 00 00 00 00 48 3b 9a 10 2e 00 00 48 0f 44 c2 48 89 85 70 ff ff ff 48 8b 8d 70 ff ff ff f6 83 69 02 00 00 01 <48> 8b 41 18 0f 85 48 01 00 00 48 85 c9 74 12 48 8b 51 08 48 83
        RIP  [<ffffffff813f98e1>] ata_eh_recover+0x9a1/0x1510
         RSP <ffff880132defbf0>
        CR2: 0000000000000018
      
      Fix it by testing @link->ap->flags instead.
      
      stable: ATA_FLAG_NO_DIPM was added during 2.6.39 cycle but was
              backported to 2.6.37 and 38.  This is a fix for that and thus
              also applicable to 2.6.37 and 38.
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Reported-by: default avatar"Nathan A. Mourey II" <nmoureyii@ne.rr.com>
      LKML-Reference: <1304555277.2059.2.camel@localhost.localdomain>
      Cc: Connor H <cmdkhh@gmail.com>
      Cc: stable@kernel.org
      Signed-off-by: default avatarJeff Garzik <jgarzik@pobox.com>
      5f6f12cc
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6 · ddb503b4
      Linus Torvalds authored
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6:
        alpha: Wire up syscalls new to 2.6.39
        alpha: convert to clocksource_register_hz
      ddb503b4
  3. 13 May, 2011 11 commits
  4. 12 May, 2011 20 commits