When the DSA_NOTIFIER_TAG_PROTO returns an error, the user space process
which initiated the protocol change exits the kernel processing while
still holding the rtnl_mutex. So any other process attempting to lock
the rtnl_mutex would deadlock after such event.

The error handling of DSA_NOTIFIER_TAG_PROTO was inadvertently changed
by the blamed commit, introducing this regression. We must still call
rtnl_unlock(), and we must still call DSA_NOTIFIER_TAG_PROTO for the old
protocol. The latter is due to the limiting design of notifier chains
for cross-chip operations, which don't have a built-in error recovery
mechanism - we should look into using notifier_call_chain_robust for that.

Fixes: dc452a47 ("net: dsa: introduce tagger-owned storage for private and shared data")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220228141715.146485-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Luiz Augusto von Dentz says:

====================
bluetooth pull request for net:

 - Fix regression with scanning not working in some systems.

* tag 'for-net-2022-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
  Bluetooth: Fix not checking MGMT cmd pending queue
====================

Link: https://lore.kernel.org/r/20220302004330.125536-1-luiz.dentz@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

A number of places in the MGMT handlers we examine the command queue for
other commands (in progress but not yet complete) that will interact
with the process being performed. However, not all commands go into the
queue if one of:

1. There is no negative side effect of consecutive or redundent commands
2. The command is entirely perform "inline".

This change examines each "pending command" check, and if it is not
needed, deletes the check. Of the remaining pending command checks, we
make sure that the command is in the pending queue by using the
mgmt_pending_add/mgmt_pending_remove pair rather than the
mgmt_pending_new/mgmt_pending_free pair.

Link: https://lore.kernel.org/linux-bluetooth/f648f2e11bb3c2974c32e605a85ac3a9fac944f1.camel@redhat.com/T/Tested-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Brian Gix <brian.gix@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

1) Use kfree_rcu(ptr, rcu) variant, using kfree_rcu(ptr) was not
   intentional. From Eric Dumazet.

2) Use-after-free in netfilter hook core, from Eric Dumazet.

3) Missing rcu read lock side for netfilter egress hook,
   from Florian Westphal.

4) nf_queue assume state->sk is full socket while it might not be.
   Invoke sock_gen_put(), from Florian Westphal.

5) Add selftest to exercise the reported KASAN splat in 4)

6) Fix possible use-after-free in nf_queue in case sk_refcnt is 0.
   Also from Florian.

7) Use input interface index only for hardware offload, not for
   the software plane. This breaks tc ct action. Patch from Paul Blakey.

* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  net/sched: act_ct: Fix flow table lookup failure with no originating ifindex
  netfilter: nf_queue: handle socket prefetch
  netfilter: nf_queue: fix possible use-after-free
  selftests: netfilter: add nfqueue TCP_NEW_SYN_RECV socket race test
  netfilter: nf_queue: don't assume sk is full socket
  netfilter: egress: silence egress hook lockdep splats
  netfilter: fix use-after-free in __nf_register_net_hook()
  netfilter: nf_tables: prefer kfree_rcu(ptr, rcu) variant
====================

Link: https://lore.kernel.org/r/20220301215337.378405-1-pablo@netfilter.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

After cited commit optimizted hw insertion, flow table entries are
populated with ifindex information which was intended to only be used
for HW offload. This tuple ifindex is hashed in the flow table key, so
it must be filled for lookup to be successful. But tuple ifindex is only
relevant for the netfilter flowtables (nft), so it's not filled in
act_ct flow table lookup, resulting in lookup failure, and no SW
offload and no offload teardown for TCP connection FIN/RST packets.

To fix this, add new tc ifindex field to tuple, which will
only be used for offloading, not for lookup, as it will not be
part of the tuple hash.

Fixes: 9795ded7 ("net/sched: act_ct: Fill offloading tuple iifidx")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Merge tag 'wireless-for-net-2022-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless

johannes Berg says:

====================

Some last-minute fixes:
 * rfkill
   - add missing rfill_soft_blocked() when disabled

 * cfg80211
   - handle a nla_memdup() failure correctly
   - fix CONFIG_CFG80211_EXTRA_REGDB_KEYDIR typo in
     Makefile

 * mac80211
   - fix EAPOL handling in 802.3 RX path
   - reject setting up aggregation sessions before
     connection is authorized to avoid timeouts or
     similar
   - handle some SAE authentication steps correctly
   - fix AC selection in mesh forwarding

 * iwlwifi
   - remove TWT support as it causes firmware crashes
     when the AP isn't behaving correctly
   - check debugfs pointer before dereferncing it
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The kbuild change here accidentally removed not only the
unquoting, but also the last character of the variable
name. Fix that.

Fixes: 129ab0d2 ("kbuild: do not quote string values in include/config/auto.conf")
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20220221155512.1d25895f7c5f.I50fa3d4189fcab90a2896fe8cae215035dae9508@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

In case someone combines bpf socket assign and nf_queue, then we will
queue an skb who references a struct sock that did not have its
reference count incremented.

As we leave rcu protection, there is no guarantee that skb->sk is still
valid.

For refcount-less skb->sk case, try to increment the reference count
and then override the destructor.

In case of failure we have two choices: orphan the skb and 'delete'
preselect or let nf_queue() drop the packet.

Do the latter, it should not happen during normal operation.

Fixes: cf7fbe66 ("bpf: Add socket assign support")
Acked-by: Joe Stringer <joe@cilium.io>
Signed-off-by: Florian Westphal <fw@strlen.de>

Eric Dumazet says:
  The sock_hold() side seems suspect, because there is no guarantee
  that sk_refcnt is not already 0.

On failure, we cannot queue the packet and need to indicate an
error.  The packet will be dropped by the caller.

v2: split skb prefetch hunk into separate change

Fixes: 271b72c7 ("udp: RCU handling for Unicast packets.")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>

causes:
BUG: KASAN: slab-out-of-bounds in sk_free+0x25/0x80
Write of size 4 at addr ffff888106df0284 by task nf-queue/1459
 sk_free+0x25/0x80
 nf_queue_entry_release_refs+0x143/0x1a0
 nf_reinject+0x233/0x770

... without 'netfilter: nf_queue: don't assume sk is full socket'.
Signed-off-by: Florian Westphal <fw@strlen.de>

There is no guarantee that state->sk refers to a full socket.

If refcount transitions to 0, sock_put calls sk_free which then ends up
with garbage fields.

I'd like to thank Oleksandr Natalenko and Jiri Benc for considerable
debug work and pointing out state->sk oddities.

Fixes: ca6fb065 ("tcp: attach SYNACK messages to request sockets instead of listener")
Tested-by: Oleksandr Natalenko <oleksandr@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>

When we get anti-clogging token required (added by the commit
mentioned below), or the other status codes added by the later
commit 4e56cde1 ("mac80211: Handle special status codes in
SAE commit") we currently just pretend (towards the internal
state machine of authentication) that we didn't receive anything.

This has the undesirable consequence of retransmitting the prior
frame, which is not expected, because the timer is still armed.

If we just disarm the timer at that point, it would result in
the undesirable side effect of being in this state indefinitely
if userspace crashes, or so.

So to fix this, reset the timer and set a new auth_data->waiting
in order to have no more retransmissions, but to have the data
destroyed when the timer actually fires, which will only happen
if userspace didn't continue (i.e. crashed or abandoned it.)

Fixes: a4055e74 ("mac80211: Don't destroy auth data in case of anti-clogging")
Reported-by: Jouni Malinen <j@w1.fi>
Link: https://lore.kernel.org/r/20220224103932.75964e1d7932.Ia487f91556f29daae734bf61f8181404642e1eec@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

As there's potential for failure of the nla_memdup(),
check the return value.

Fixes: a442b761 ("cfg80211: add add_nan_func / del_nan_func")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220301100020.3801187-1-jiasheng@iscas.ac.cnSigned-off-by: Johannes Berg <johannes.berg@intel.com>

When "debugfs=off" is used on the kernel command line, iwiwifi's
mvm module uses an invalid/unchecked debugfs_dir pointer and causes
a BUG:

 BUG: kernel NULL pointer dereference, address: 000000000000004f
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 0 P4D 0
 Oops: 0000 [#1] PREEMPT SMP
 CPU: 1 PID: 503 Comm: modprobe Tainted: G        W         5.17.0-rc5 #7
 Hardware name: Dell Inc. Inspiron 15 5510/076F7Y, BIOS 2.4.1 11/05/2021
 RIP: 0010:iwl_mvm_dbgfs_register+0x692/0x700 [iwlmvm]
 Code: 69 a0 be 80 01 00 00 48 c7 c7 50 73 6a a0 e8 95 cf ee e0 48 8b 83 b0 1e 00 00 48 c7 c2 54 73 6a a0 be 64 00 00 00 48 8d 7d 8c <48> 8b 48 50 e8 15 22 07 e1 48 8b 43 28 48 8d 55 8c 48 c7 c7 5f 73
 RSP: 0018:ffffc90000a0ba68 EFLAGS: 00010246
 RAX: ffffffffffffffff RBX: ffff88817d6e3328 RCX: ffff88817d6e3328
 RDX: ffffffffa06a7354 RSI: 0000000000000064 RDI: ffffc90000a0ba6c
 RBP: ffffc90000a0bae0 R08: ffffffff824e4880 R09: ffffffffa069d620
 R10: ffffc90000a0ba00 R11: ffffffffffffffff R12: 0000000000000000
 R13: ffffc90000a0bb28 R14: ffff88817d6e3328 R15: ffff88817d6e3320
 FS:  00007f64dd92d740(0000) GS:ffff88847f640000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 000000000000004f CR3: 000000016fc79001 CR4: 0000000000770ee0
 PKRU: 55555554
 Call Trace:
  <TASK>
  ? iwl_mvm_mac_setup_register+0xbdc/0xda0 [iwlmvm]
  iwl_mvm_start_post_nvm+0x71/0x100 [iwlmvm]
  iwl_op_mode_mvm_start+0xab8/0xb30 [iwlmvm]
  _iwl_op_mode_start+0x6f/0xd0 [iwlwifi]
  iwl_opmode_register+0x6a/0xe0 [iwlwifi]
  ? 0xffffffffa0231000
  iwl_mvm_init+0x35/0x1000 [iwlmvm]
  ? 0xffffffffa0231000
  do_one_initcall+0x5a/0x1b0
  ? kmem_cache_alloc+0x1e5/0x2f0
  ? do_init_module+0x1e/0x220
  do_init_module+0x48/0x220
  load_module+0x2602/0x2bc0
  ? __kernel_read+0x145/0x2e0
  ? kernel_read_file+0x229/0x290
  __do_sys_finit_module+0xc5/0x130
  ? __do_sys_finit_module+0xc5/0x130
  __x64_sys_finit_module+0x13/0x20
  do_syscall_64+0x38/0x90
  entry_SYSCALL_64_after_hwframe+0x44/0xae
 RIP: 0033:0x7f64dda564dd
 Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1b 29 0f 00 f7 d8 64 89 01 48
 RSP: 002b:00007ffdba393f88 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f64dda564dd
 RDX: 0000000000000000 RSI: 00005575399e2ab2 RDI: 0000000000000001
 RBP: 000055753a91c5e0 R08: 0000000000000000 R09: 0000000000000002
 R10: 0000000000000001 R11: 0000000000000246 R12: 00005575399e2ab2
 R13: 000055753a91ceb0 R14: 0000000000000000 R15: 000055753a923018
  </TASK>
 Modules linked in: btintel(+) btmtk bluetooth vfat snd_hda_codec_hdmi fat snd_hda_codec_realtek snd_hda_codec_generic iwlmvm(+) snd_sof_pci_intel_tgl mac80211 snd_sof_intel_hda_common soundwire_intel soundwire_generic_allocation soundwire_cadence soundwire_bus snd_sof_intel_hda snd_sof_pci snd_sof snd_sof_xtensa_dsp snd_soc_hdac_hda snd_hda_ext_core snd_soc_acpi_intel_match snd_soc_acpi snd_soc_core btrfs snd_compress snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec raid6_pq iwlwifi snd_hda_core snd_pcm snd_timer snd soundcore cfg80211 intel_ish_ipc(+) thunderbolt rfkill intel_ishtp ucsi_acpi wmi i2c_hid_acpi i2c_hid evdev
 CR2: 000000000000004f
 ---[ end trace 0000000000000000 ]---

Check the debugfs_dir pointer for an error before using it.

Fixes: 8c082a99 ("iwlwifi: mvm: simplify iwl_mvm_dbgfs_register")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: linux-wireless@vger.kernel.org
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220223030630.23241-1-rdunlap@infradead.org
[change to make both conditional]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Some APs misbehave when TWT is used and cause our firmware to crash.
We don't know a reasonable way to detect and work around this problem
in the FW yet.  To prevent these crashes, disable TWT in the driver by
stopping to advertise TWT support.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=215523Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com>
[reworded the commit message]
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20220301072926.153969-1-luca@coelho.fiSigned-off-by: Johannes Berg <johannes.berg@intel.com>

If CONFIG_RFKILL is not set, the Intel WiFi driver will not build
the iw_mvm driver part due to the missing rfill_soft_blocked()
call. Adding a inline declaration of rfill_soft_blocked() if
CONFIG_RFKILL=n fixes the following error:

drivers/net/wireless/intel/iwlwifi/mvm/mvm.h: In function 'iwl_mvm_mei_set_sw_rfkill_state':
drivers/net/wireless/intel/iwlwifi/mvm/mvm.h:2215:38: error: implicit declaration of function 'rfkill_soft_blocked'; did you mean 'rfkill_blocked'? [-Werror=implicit-function-declaration]
 2215 |                 mvm->hw_registered ? rfkill_soft_blocked(mvm->hw->wiphy->rfkill) : false;
      |                                      ^~~~~~~~~~~~~~~~~~~
      |                                      rfkill_blocked
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reported-by: Neill Whillans <neill.whillans@codethink.co.uk>
Fixes: 5bc9a9dd ("rfkill: allow to get the software rfkill state")
Link: https://lore.kernel.org/r/20220218093858.1245677-1-ben.dooks@codethink.co.ukSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2022-02-28

This series contains updates to igc and e1000e drivers.

Corinna Vinschen ensures release of hardware sempahore on failed
register read in igc_read_phy_reg_gpy().

Sasha does the same for the write variant, igc_write_phy_reg_gpy(). On
e1000e, he resolves an issue with hardware unit hang on s0ix exit
by disabling some bits and LAN connected device reset during power
management flows. Lastly, he allows for TGP platforms to correct its
NVM checksum.

v2: Fix Fixes tag on patch 3
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Update MAC type check e1000_pch_tgp because for e1000_pch_cnp,
NVM checksum update is still possible.
Emit a more detailed warning message.

Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=1191663
Fixes: 4051f683 ("e1000e: Do not take care about recovery NVM checksum")
Reported-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Disable the OEM bit/Gig Disable/restart AN impact and disable the PHY
LAN connected device (LCD) reset during power management flows. This
fixes possible HW unit hangs on the s0ix exit on some corporate ADL
platforms.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=214821
Fixes: 3e55d231 ("e1000e: Add handshake with the CSME to support S0ix")
Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Suggested-by: Nir Efrati <nir.efrati@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Netfilter assumes its called with rcu_read_lock held, but in egress
hook case it may be called with BH readlock.

This triggers lockdep splat.

In order to avoid to change all rcu_dereference() to
rcu_dereference_check(..., rcu_read_lock_bh_held()), wrap nf_hook_slow
with read lock/unlock pair.
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

We must not dereference @new_hooks after nf_hook_mutex has been released,
because other threads might have freed our allocated hooks already.

BUG: KASAN: use-after-free in nf_hook_entries_get_hook_ops include/linux/netfilter.h:130 [inline]
BUG: KASAN: use-after-free in hooks_validate net/netfilter/core.c:171 [inline]
BUG: KASAN: use-after-free in __nf_register_net_hook+0x77a/0x820 net/netfilter/core.c:438
Read of size 2 at addr ffff88801c1a8000 by task syz-executor237/4430

CPU: 1 PID: 4430 Comm: syz-executor237 Not tainted 5.17.0-rc5-syzkaller-00306-g2293be58 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
 print_address_description.constprop.0.cold+0x8d/0x336 mm/kasan/report.c:255
 __kasan_report mm/kasan/report.c:442 [inline]
 kasan_report.cold+0x83/0xdf mm/kasan/report.c:459
 nf_hook_entries_get_hook_ops include/linux/netfilter.h:130 [inline]
 hooks_validate net/netfilter/core.c:171 [inline]
 __nf_register_net_hook+0x77a/0x820 net/netfilter/core.c:438
 nf_register_net_hook+0x114/0x170 net/netfilter/core.c:571
 nf_register_net_hooks+0x59/0xc0 net/netfilter/core.c:587
 nf_synproxy_ipv6_init+0x85/0xe0 net/netfilter/nf_synproxy_core.c:1218
 synproxy_tg6_check+0x30d/0x560 net/ipv6/netfilter/ip6t_SYNPROXY.c:81
 xt_check_target+0x26c/0x9e0 net/netfilter/x_tables.c:1038
 check_target net/ipv6/netfilter/ip6_tables.c:530 [inline]
 find_check_entry.constprop.0+0x7f1/0x9e0 net/ipv6/netfilter/ip6_tables.c:573
 translate_table+0xc8b/0x1750 net/ipv6/netfilter/ip6_tables.c:735
 do_replace net/ipv6/netfilter/ip6_tables.c:1153 [inline]
 do_ip6t_set_ctl+0x56e/0xb90 net/ipv6/netfilter/ip6_tables.c:1639
 nf_setsockopt+0x83/0xe0 net/netfilter/nf_sockopt.c:101
 ipv6_setsockopt+0x122/0x180 net/ipv6/ipv6_sockglue.c:1024
 rawv6_setsockopt+0xd3/0x6a0 net/ipv6/raw.c:1084
 __sys_setsockopt+0x2db/0x610 net/socket.c:2180
 __do_sys_setsockopt net/socket.c:2191 [inline]
 __se_sys_setsockopt net/socket.c:2188 [inline]
 __x64_sys_setsockopt+0xba/0x150 net/socket.c:2188
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f65a1ace7d9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 71 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f65a1a7f308 EFLAGS: 00000246 ORIG_RAX: 0000000000000036
RAX: ffffffffffffffda RBX: 0000000000000006 RCX: 00007f65a1ace7d9
RDX: 0000000000000040 RSI: 0000000000000029 RDI: 0000000000000003
RBP: 00007f65a1b574c8 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000020000000 R11: 0000000000000246 R12: 00007f65a1b55130
R13: 00007f65a1b574c0 R14: 00007f65a1b24090 R15: 0000000000022000
 </TASK>

The buggy address belongs to the page:
page:ffffea0000706a00 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1c1a8
flags: 0xfff00000000000(node=0|zone=1|lastcpupid=0x7ff)
raw: 00fff00000000000 ffffea0001c1b108 ffffea000046dd08 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as freed
page last allocated via order 2, migratetype Unmovable, gfp_mask 0x52dc0(GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_ZERO), pid 4430, ts 1061781545818, free_ts 1061791488993
 prep_new_page mm/page_alloc.c:2434 [inline]
 get_page_from_freelist+0xa72/0x2f50 mm/page_alloc.c:4165
 __alloc_pages+0x1b2/0x500 mm/page_alloc.c:5389
 __alloc_pages_node include/linux/gfp.h:572 [inline]
 alloc_pages_node include/linux/gfp.h:595 [inline]
 kmalloc_large_node+0x62/0x130 mm/slub.c:4438
 __kmalloc_node+0x35a/0x4a0 mm/slub.c:4454
 kmalloc_node include/linux/slab.h:604 [inline]
 kvmalloc_node+0x97/0x100 mm/util.c:580
 kvmalloc include/linux/slab.h:731 [inline]
 kvzalloc include/linux/slab.h:739 [inline]
 allocate_hook_entries_size net/netfilter/core.c:61 [inline]
 nf_hook_entries_grow+0x140/0x780 net/netfilter/core.c:128
 __nf_register_net_hook+0x144/0x820 net/netfilter/core.c:429
 nf_register_net_hook+0x114/0x170 net/netfilter/core.c:571
 nf_register_net_hooks+0x59/0xc0 net/netfilter/core.c:587
 nf_synproxy_ipv6_init+0x85/0xe0 net/netfilter/nf_synproxy_core.c:1218
 synproxy_tg6_check+0x30d/0x560 net/ipv6/netfilter/ip6t_SYNPROXY.c:81
 xt_check_target+0x26c/0x9e0 net/netfilter/x_tables.c:1038
 check_target net/ipv6/netfilter/ip6_tables.c:530 [inline]
 find_check_entry.constprop.0+0x7f1/0x9e0 net/ipv6/netfilter/ip6_tables.c:573
 translate_table+0xc8b/0x1750 net/ipv6/netfilter/ip6_tables.c:735
 do_replace net/ipv6/netfilter/ip6_tables.c:1153 [inline]
 do_ip6t_set_ctl+0x56e/0xb90 net/ipv6/netfilter/ip6_tables.c:1639
 nf_setsockopt+0x83/0xe0 net/netfilter/nf_sockopt.c:101
page last free stack trace:
 reset_page_owner include/linux/page_owner.h:24 [inline]
 free_pages_prepare mm/page_alloc.c:1352 [inline]
 free_pcp_prepare+0x374/0x870 mm/page_alloc.c:1404
 free_unref_page_prepare mm/page_alloc.c:3325 [inline]
 free_unref_page+0x19/0x690 mm/page_alloc.c:3404
 kvfree+0x42/0x50 mm/util.c:613
 rcu_do_batch kernel/rcu/tree.c:2527 [inline]
 rcu_core+0x7b1/0x1820 kernel/rcu/tree.c:2778
 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558

Memory state around the buggy address:
 ffff88801c1a7f00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 ffff88801c1a7f80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>ffff88801c1a8000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
                   ^
 ffff88801c1a8080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 ffff88801c1a8100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

Fixes: 2420b79f ("netfilter: debug: check for sorted array")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Similar to "igc_read_phy_reg_gpy: drop premature return" patch.
igc_write_phy_reg_gpy checks the return value from igc_write_phy_reg_mdic
and if it's not 0, returns immediately. By doing this, it leaves the HW
semaphore in the acquired state.

Drop this premature return statement, the function returns after
releasing the semaphore immediately anyway.

Fixes: 5586838f ("igc: Add code for PHY support")
Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Reported-by: Corinna Vinschen <vinschen@redhat.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

igc_read_phy_reg_gpy checks the return value from igc_read_phy_reg_mdic
and if it's not 0, returns immediately. By doing this, it leaves the HW
semaphore in the acquired state.

Drop this premature return statement, the function returns after
releasing the semaphore immediately anyway.

Fixes: 5586838f ("igc: Add code for PHY support")
Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

An IPA build problem arose in the linux-next tree the other day.
The problem is that a recent commit adds a new dependency on some
code, and the Kconfig file for IPA doesn't reflect that dependency.
As a result, some configurations can fail to build (particularly
when COMPILE_TEST is enabled).

The recent patch adds calls to qmp_get(), qmp_put(), and qmp_send(),
and those are built based on the QCOM_AOSS_QMP config option.  If
that symbol is not defined, stubs are defined, so we just need to
ensure QCOM_AOSS_QMP is compatible with QCOM_IPA, or it's not
defined.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: 34a08176 ("net: ipa: request IPA register values be retained")
Signed-off-by: Alex Elder <elder@linaro.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The function ioremap() in fs_init() can fail, so its return value should
be checked.
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

main.h uses NUM_TARGETS from main_regs.h, but
the missing include never causes any errors
because everywhere main.h is (currently)
included, main_regs.h is included before.
But since it is dependent on main_regs.h
it should always be included.
Signed-off-by: Casper Andersson <casper.casan@gmail.com>
Reviewed-by: Joacim Zetterling <joacim.zetterling@westermo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch calls smc_ib_unregister_client() when tcp_register_ulp()
fails, and make sure to clean it up.

Fixes: d7cd421d ("net/smc: Introduce TCP ULP support")
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are two reasons for addrconf_notify() to be called with NETDEV_DOWN:
either the network device is actually going down, or IPv6 was disabled
on the interface.

If either of them stays down while the other is toggled, we repeatedly
call the code for NETDEV_DOWN, including ipv6_mc_down(), while never
calling the corresponding ipv6_mc_up() in between. This will cause a
new entry in idev->mc_tomb to be allocated for each multicast group
the interface is subscribed to, which in turn leaks one struct ifmcaddr6
per nontrivial multicast group the interface is subscribed to.

The following reproducer will leak at least $n objects:

ip addr add ff2e::4242/32 dev eth0 autojoin
sysctl -w net.ipv6.conf.eth0.disable_ipv6=1
for i in $(seq 1 $n); do
	ip link set up eth0; ip link set down eth0
done

Joining groups with IPV6_ADD_MEMBERSHIP (unprivileged) or setting the
sysctl net.ipv6.conf.eth0.forwarding to 1 (=> subscribing to ff02::2)
can also be used to create a nontrivial idev->mc_list, which will the
leak objects with the right up-down-sequence.

Based on both sources for NETDEV_DOWN events the interface IPv6 state
should be considered:

 - not ready if the network interface is not ready OR IPv6 is disabled
   for it
 - ready if the network interface is ready AND IPv6 is enabled for it

The functions ipv6_mc_up() and ipv6_down() should only be run when this
state changes.

Implement this by remembering when the IPv6 state is ready, and only
run ipv6_mc_down() if it actually changed from ready to not ready.

The other direction (not ready -> ready) already works correctly, as:

 - the interface notification triggered codepath for NETDEV_UP /
   NETDEV_CHANGE returns early if ipv6 is disabled, and
 - the disable_ipv6=0 triggered codepath skips fully initializing the
   interface as long as addrconf_link_ready(dev) returns false
 - calling ipv6_mc_up() repeatedly does not leak anything

Fixes: 3ce62a84 ("ipv6: exit early in addrconf_notify() if IPv6 is disabled")
Signed-off-by: Johannes Nixdorf <j.nixdorf@avm.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2022-02-25

This series contains updates to iavf driver only.

Slawomir fixes stability issues that can be seen when stressing the
driver using a large number of VFs with a multitude of operations.
Among the fixes are reworking mutexes to provide more effective locking,
ensuring initialization is complete before teardown, preventing
operations which could race while removing the driver, stopping certain
tasks from being queued when the device is down, and adding a missing
mutex unlock.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'linux-can-fixes-for-5.17-20220225' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2022-02-25

The first 2 patches are by Vincent Mailhol and fix the error handling
of the ndo_open callbacks of the etas_es58x and the gs_usb CAN USB
drivers.

The last patch is by Lad Prabhakar and fixes a small race condition in
the rcar_canfd's rcar_canfd_channel_probe() function.

* tag 'linux-can-fixes-for-5.17-20220225' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
  can: rcar_canfd: rcar_canfd_channel_probe(): register the CAN device when fully ready
  can: gs_usb: change active_channels's type from atomic_t to u8
  can: etas_es58x: change opened_channel_cnt's type from atomic_t to u8
====================

Link: https://lore.kernel.org/r/20220225165622.3231809-1-mkl@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The setup of __IAVF_RESETTING state in watchdog task had no
effect and could lead to slow resets in the driver as
the task for __IAVF_RESETTING state only requeues watchdog.
Till now the __IAVF_RESETTING was interpreted by reset task
as running state which could lead to errors with allocating
and resources disposal.

Make watchdog_task queue the reset task when it's necessary.
Do not update the state to __IAVF_RESETTING so the reset task
knows exactly what is the current state of the adapter.

Fixes: 898ef1cb ("iavf: Combine init and watchdog state machines")
Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com>
Signed-off-by: Phani Burra <phani.r.burra@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

The driver was queueing reset_task regardless of the netdev
state.

Do not queue the reset task in iavf_change_mtu if netdev
is not running.

Fixes: fdd4044f ("iavf: Remove timer for work triggering, use delaying work instead")
Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com>
Signed-off-by: Phani Burra <phani.r.burra@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

There exists a missing mutex_unlock call on crit_lock in
iavf_reset_task call path.

Unlock the crit_lock before returning from reset task.

Fixes: 5ac49f3c ("iavf: use mutexes for locking of critical sections")
Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com>
Signed-off-by: Phani Burra <phani.r.burra@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

When iavf_init_version_check sends VIRTCHNL_OP_GET_VF_RESOURCES
message, the driver will wait for the response after requeueing
the watchdog task in iavf_init_get_resources call stack. The
logic is implemented this way that iavf_init_get_resources has
to be called in order to allocate adapter->vf_res. It is polling
for the AQ response in iavf_get_vf_config function. Expect a
call trace from kernel when adminq_task worker handles this
message first. adapter->vf_res will be NULL in
iavf_virtchnl_completion.

Make the watchdog task not queue the adminq_task if the init
process is not finished yet.

Fixes: 898ef1cb ("iavf: Combine init and watchdog state machines")
Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com>
Signed-off-by: Phani Burra <phani.r.burra@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

iavf_virtchnl_completion is called under crit_lock but when
the code for VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS is called,
this lock is released in order to obtain rtnl_lock to avoid
ABBA deadlock with unregister_netdev.

Along with the new way iavf_remove behaves, there exist
many risks related to the lock release and attmepts to regrab
it. The driver faces crashes related to races between
unregister_netdev and netdev_update_features. Yet another
risk is that the driver could already obtain the crit_lock
in order to destroy it and iavf_virtchnl_completion could
crash or block forever.

Make iavf_virtchnl_completion never relock crit_lock in it's
call paths.

Extract rtnl_lock locking logic to the driver for
unregister_netdev in order to set the netdev_registered flag
inside the lock.

Introduce a new flag that will inform adminq_task to perform
the code from VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS right after
it finishes processing messages. Guard this code with remove
flags so it's never called when the driver is in remove state.

Fixes: 5951a2b9 ("iavf: Fix VLAN feature flags after VFR")
Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com>
Signed-off-by: Phani Burra <phani.r.burra@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

When init states of the adapter work, the errors like lack
of communication with the PF might hop in. If such events
occur the driver restores previous states in order to retry
initialization in a proper way. When remove task kicks in,
this situation could lead to races with unregistering the
netdevice as well as resources cleanup. With the commit
introducing the waiting in remove for init to complete,
this problem turns into an endless waiting if init never
recovers from errors.

Introduce __IAVF_IN_REMOVE_TASK bit to indicate that the
remove thread has started.

Make __IAVF_COMM_FAILED adapter state respect the
__IAVF_IN_REMOVE_TASK bit and set the __IAVF_INIT_FAILED
state and return without any action instead of trying to
recover.

Make __IAVF_INIT_FAILED adapter state respect the
__IAVF_IN_REMOVE_TASK bit and return without any further
actions.

Make the loop in the remove handler break when adapter has
__IAVF_INIT_FAILED state set.

Fixes: 898ef1cb ("iavf: Combine init and watchdog state machines")
Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com>
Signed-off-by: Phani Burra <phani.r.burra@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

There exist races when port is being configured and remove is
triggered.

unregister_netdev is not and can't be called under crit_lock
mutex since it is calling ndo_stop -> iavf_close which requires
this lock. Depending on init state the netdev could be still
unregistered so unregister_netdev never cleans up, when shortly
after that the device could become registered.

Make iavf_remove wait until port finishes initialization.
All critical state changes are atomic (under crit_lock).
Crashes that come from iavf_reset_interrupt_capability and
iavf_free_traffic_irqs should now be solved in a graceful
manner.

Fixes: 605ca7c5 ("iavf: Fix kernel BUG in free_msi_irqs")
Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com>
Signed-off-by: Phani Burra <phani.r.burra@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

The driver used to crash in multiple spots when put to stress testing
of the init, reset and remove paths.

The user would experience call traces or hangs when creating,
resetting, removing VFs. Depending on the machines, the call traces
are happening in random spots, like reset restoring resources racing
with driver remove.

Make adapter->crit_lock mutex a mandatory lock for guarding the
operations performed on all workqueues and functions dealing with
resource allocation and disposal.

Make __IAVF_REMOVE a final state of the driver respected by
workqueues that shall not requeue, when they fail to obtain the
crit_lock.

Make the IRQ handler not to queue the new work for adminq_task
when the __IAVF_REMOVE state is set.

Fixes: 5ac49f3c ("iavf: use mutexes for locking of critical sections")
Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com>
Signed-off-by: Phani Burra <phani.r.burra@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

__setup() handlers should return 1 on success, i.e., the parameter
has been handled. A return of 0 causes the "option=value" string to be
added to init's environment strings, polluting it.

Fixes: 47dd7a54 ("net: add support for STMicroelectronics Ethernet controllers.")
Fixes: f3240e28 ("stmmac: remove warning when compile as built-in (V2)")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Jose Abreu <joabreu@synopsys.com>
Link: https://lore.kernel.org/r/20220224033536.25056-1-rdunlap@infradead.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

__setup() handlers should return 1 on success, i.e., the parameter
has been handled. A return of 0 causes the "option=value" string to be
added to init's environment strings, polluting it.

Fixes: acc18c14 ("net: sxgbe: add EEE(Energy Efficient Ethernet) for Samsung sxgbe")
Fixes: 1edb9ca6 ("net: sxgbe: add basic framework for Samsung 10Gb ethernet driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Cc: Siva Reddy <siva.kallam@samsung.com>
Cc: Girish K S <ks.giri@samsung.com>
Cc: Byungho An <bh74.an@samsung.com>
Link: https://lore.kernel.org/r/20220224033528.24640-1-rdunlap@infradead.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>