- 02 Jan, 2018 28 commits
-
-
Kevin Cernekee authored
[ Upstream commit 93c64764 ] Currently, a nlmon link inside a child namespace can observe systemwide netlink activity. Filter the traffic so that nlmon can only sniff netlink messages from its own netns. Test case: vpnns -- bash -c "ip link add nlmon0 type nlmon; \ ip link set nlmon0 up; \ tcpdump -i nlmon0 -q -w /tmp/nlmon.pcap -U" & sudo ip xfrm state add src 10.1.1.1 dst 10.1.1.2 proto esp \ spi 0x1 mode transport \ auth sha1 0x6162633132330000000000000000000000000000 \ enc aes 0x00000000000000000000000000000000 grep --binary abc123 /tmp/nlmon.pcap Signed-off-by:
Kevin Cernekee <cernekee@chromium.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kevin Cernekee authored
[ Upstream commit a46182b0 ] Closing a multicast socket after the final IPv4 address is deleted from an interface can generate a membership report that uses the source IP from a different interface. The following test script, run from an isolated netns, reproduces the issue: #!/bin/bash ip link add dummy0 type dummy ip link add dummy1 type dummy ip link set dummy0 up ip link set dummy1 up ip addr add 10.1.1.1/24 dev dummy0 ip addr add 192.168.99.99/24 dev dummy1 tcpdump -U -i dummy0 & socat EXEC:"sleep 2" \ UDP4-DATAGRAM:239.101.1.68:8889,ip-add-membership=239.0.1.68:10.1.1.1 & sleep 1 ip addr del 10.1.1.1/24 dev dummy0 sleep 5 kill %tcpdump RFC 3376 specifies that the report must be sent with a valid IP source address from the destination subnet, or from address 0.0.0.0. Add an extra check to make sure this is the case. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Fugang Duan authored
[ Upstream commit 178e5f57 ] The enet IP only support 32 bit, it will use swiotlb buffer to do dma mapping when xmit buffer DMA memory address is bigger than 4G in i.MX platform. After stress suspend/resume test, it will print out: log: [12826.352864] fec 5b040000.ethernet: swiotlb buffer is full (sz: 191 bytes) [12826.359676] DMA: Out of SW-IOMMU space for 191 bytes at device 5b040000.ethernet [12826.367110] fec 5b040000.ethernet eth0: Tx DMA memory map failed The issue is that the ready xmit buffers that are dma mapped but DMA still don't copy them into fifo, once MAC restart, these DMA buffers are not unmapped. So it should check the dma mapping buffer and unmap them. Signed-off-by:
Fugang Duan <fugang.duan@nxp.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit b9b312a7 ] syzkaller reported crashes in IPv6 stack [1] Xin Long found that lo MTU was set to silly values. IPv6 stack reacts to changes to small MTU, by disabling itself under RTNL. But there is a window where threads not using RTNL can see a wrong device mtu. This can lead to surprises, in mld code where it is assumed the mtu is suitable. Fix this by reading device mtu once and checking IPv6 minimal MTU. [1] skbuff: skb_over_panic: text:0000000010b86b8d len:196 put:20 head:000000003b477e60 data:000000000e85441e tail:0xd4 end:0xc0 dev:lo ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:104! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc2-mm1+ #39 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:skb_panic+0x15c/0x1f0 net/core/skbuff.c:100 RSP: 0018:ffff8801db307508 EFLAGS: 00010286 RAX: 0000000000000082 RBX: ffff8801c517e840 RCX: 0000000000000000 RDX: 0000000000000082 RSI: 1ffff1003b660e61 RDI: ffffed003b660e95 RBP: ffff8801db307570 R08: 1ffff1003b660e23 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff85bd4020 R13: ffffffff84754ed2 R14: 0000000000000014 R15: ffff8801c4e26540 FS: 0000000000000000(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000463610 CR3: 00000001c6698000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> skb_over_panic net/core/skbuff.c:109 [inline] skb_put+0x181/0x1c0 net/core/skbuff.c:1694 add_grhead.isra.24+0x42/0x3b0 net/ipv6/mcast.c:1695 add_grec+0xa55/0x1060 net/ipv6/mcast.c:1817 mld_send_cr net/ipv6/mcast.c:1903 [inline] mld_ifc_timer_expire+0x4d2/0x770 net/ipv6/mcast.c:2448 call_timer_fn+0x23b/0x840 kernel/time/timer.c:1320 expire_timers kernel/time/timer.c:1357 [inline] __run_timers+0x7e1/0xb60 kernel/time/timer.c:1660 run_timer_softirq+0x4c/0xb0 kernel/time/timer.c:1686 __do_softirq+0x29d/0xbb2 kernel/softirq.c:285 invoke_softirq kernel/softirq.c:365 [inline] irq_exit+0x1d3/0x210 kernel/softirq.c:405 exiting_irq arch/x86/include/asm/apic.h:540 [inline] smp_apic_timer_interrupt+0x16b/0x700 arch/x86/kernel/apic/apic.c:1052 apic_timer_interrupt+0xa9/0xb0 arch/x86/entry/entry_64.S:920 Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Tested-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit b5476022 ] IPv4 stack reacts to changes to small MTU, by disabling itself under RTNL. But there is a window where threads not using RTNL can see a wrong device mtu. This can lead to surprises, in igmp code where it is assumed the mtu is suitable. Fix this by reading device mtu once and checking IPv4 minimal MTU. This patch adds missing IPV4_MIN_MTU define, to not abuse ETH_MIN_MTU anymore. Signed-off-by:
-
Linus Torvalds authored
commit 3ce120b1 upstream. It appears that hardened gentoo enables "-fstack-check" by default for gcc. That doesn't work _at_all_ for the kernel, because the kernel stack doesn't act like a user stack at all: it's much smaller, and it doesn't auto-expand on use. So the extra "probe one page below the stack" code generated by -fstack-check just breaks the kernel in horrible ways, causing infinite double faults etc. [ I have to say, that the particular code gcc generates looks very stupid even for user space where it works, but that's a separate issue. ] Reported-and-tested-by:
Alexander Tsoy <alexander@tsoy.me> Reported-and-tested-by:
Toralf Förster <toralf.foerster@gmx.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Andy Lutomirski authored
commit 924c6b90 upstream. Trying to reboot via real mode fails with PCID on: long mode cannot be exited while CR4.PCIDE is set. (No, I have no idea why, but the SDM and actual CPUs are in agreement here.) The result is a GPF and a hang instead of a reboot. I didn't catch this in testing because neither my computer nor my VM reboots this way. I can trigger it with reboot=bios, though. Fixes: 660da7c9 ("x86/mm: Enable CR4.PCIDE on supported systems") Reported-and-tested-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Link: https://lkml.kernel.org/r/f1e7d965998018450a7a70c2823873686a8b21c0.1507524746.git.luto@kernel.org Cc: Hugh Dickins <hughd@google.com> Signed-off-by:
-
Andy Lutomirski authored
commit 660da7c9 upstream. We can use PCID if the CPU has PCID and PGE and we're not on Xen. By itself, this has no effect. A followup patch will start using PCID. Signed-off-by:
Nadav Amit <nadav.amit@gmail.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by:
Ingo Molnar <mingo@kernel.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by:
-
Andy Lutomirski authored
commit 0790c9aa upstream. The parameter is only present on x86_64 systems to save a few bytes, as PCID is always disabled on x86_32. Signed-off-by:
Borislav Petkov <bp@suse.de> Reviewed-by:
-
Andy Lutomirski authored
commit cba4671a upstream. 32-bit kernels on new hardware will see PCID in CPUID, but PCID can only be used in 64-bit mode. Rather than making all PCID code conditional, just disable the feature on 32-bit builds. Signed-off-by:
-
Andy Lutomirski authored
commit ce4a4e56 upstream. The UP asm/tlbflush.h generates somewhat nicer code than the SMP version. Aside from that, it's fallen quite a bit behind the SMP code: - flush_tlb_mm_range() didn't flush individual pages if the range was small. - The lazy TLB code was much weaker. This usually wouldn't matter, but, if a kernel thread flushed its lazy "active_mm" more than once (due to reclaim or similar), it wouldn't be unlazied and would instead pointlessly flush repeatedly. - Tracepoints were missing. Aside from that, simply having the UP code around was a maintanence burden, since it means that any change to the TLB flush code had to make sure not to break it. Simplify everything by deleting the UP code. Signed-off-by:
-
Andy Lutomirski authored
commit ca6c99c0 upstream. flush_tlb_page() was very similar to flush_tlb_mm_range() except that it had a couple of issues: - It was missing an smp_mb() in the case where current->active_mm != mm. (This is a longstanding bug reported by Nadav Amit) - It was missing tracepoints and vm counter updates. The only reason that I can see for keeping it at as a separate function is that it could avoid a few branches that flush_tlb_mm_range() needs to decide to flush just one page. This hardly seems worthwhile. If we decide we want to get rid of those branches again, a better way would be to introduce an __flush_tlb_mm_range() helper and make both flush_tlb_page() and flush_tlb_mm_range() use it. Signed-off-by:
Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@suse.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Nadav Amit <namit@vmware.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/3cc3847cf888d8907577569b8bac3f01992ef8f9.1495492063.git.luto@kernel.orgSigned-off-by:
-
Andy Lutomirski authored
commit ce27374f upstream. I'm about to rewrite the function almost completely, but first I want to get a functional change out of the way. Currently, if flush_tlb_mm_range() does not flush the local TLB at all, it will never do individual page flushes on remote CPUs. This seems to be an accident, and preserving it will be awkward. Let's change it first so that any regressions in the rewrite will be easier to bisect and so that the rewrite can attempt to change no visible behavior at all. The fix is simple: we can simply avoid short-circuiting the calculation of base_pages_to_flush. As a side effect, this also eliminates a potential corner case: if tlb_single_page_flush_ceiling == TLB_FLUSH_ALL, flush_tlb_mm_range() could have ended up flushing the entire address space one page at a time. Signed-off-by:
Dave Hansen <dave.hansen@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Nadav Amit <namit@vmware.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/4b29b771d9975aad7154c314534fec235618175a.1492844372.git.luto@kernel.orgSigned-off-by:
-
Andy Lutomirski authored
commit 29961b59 upstream. I was trying to figure out what how flush_tlb_current_task() would possibly work correctly if current->mm != current->active_mm, but I realized I could spare myself the effort: it has no callers except the unused flush_tlb() macro. Signed-off-by:
-
Andy Lutomirski authored
commit 9ccee237 upstream. mark_screen_rdonly() is the last remaining caller of flush_tlb(). flush_tlb_mm_range() is potentially faster and isn't obsolete. Compile-tested only because I don't know whether software that uses this mechanism even exists. Signed-off-by:
-
Hui Wang authored
commit 285d5ddc upstream. It has the codec alc256, and add its pin definition to pin quirk table to let it apply ALC255_FIXUP_DELL1_MIC_NO_PRESENCE. Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit a36c2638 upstream. Since the commit 97cc2ed2 ("ALSA: hda - Fix yet another i915 pointer leftover in error path") cleared hdac_acomp pointer, the WARN_ON() non-NULL check in snd_hdac_i915_register_notifier() may give a false-positive warning, as the function gets called no matter whether the component is registered or not. For fixing it, let's get rid of the spurious WARN_ON(). Fixes: 97cc2ed2 ("ALSA: hda - Fix yet another i915 pointer leftover in error path") Reported-by:
Kouta Okamoto <kouta.okamoto@toshiba.co.jp> Signed-off-by:
-
Andrew F. Davis authored
commit 737e0b7b upstream. GPIO1 control register is number 51, fix this here. Fixes: bafcbfe4 ("ASoC: tlv320aic31xx: Make the register values human readable") Signed-off-by:
Andrew F. Davis <afd@ti.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Johan Hovold authored
commit 15f8c5f2 upstream. Fix child-node lookup during probe, which ended up searching the whole device tree depth-first starting at the parent rather than just matching on its children. To make things worse, the parent codec node was also prematurely freed, while the child node was leaked. Fixes: 2d6d649a ("ASoC: twl4030: Support for DT booted kernel") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Maciej S. Szmigiero authored
commit 695b78b5 upstream. AC'97 ops (register read / write) need SSI regmap and clock, so they have to be set after them. We also need to set these ops back to NULL if we fail the probe. Signed-off-by:
Maciej S. Szmigiero <mail@maciej.szmigiero.name> Acked-by:
Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by:
-
Johan Hovold authored
commit bc6476d6 upstream. Fix child-node lookup during probe, which ended up searching the whole device tree depth-first starting at the parent rather than just matching on its children. To make things worse, the parent codec node was also prematurely freed. Fixes: 4d50934a ("ASoC: da7218: Add da7218 codec driver") Signed-off-by:
Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by:
-
Ben Hutchings authored
commit 50dd2ea8 upstream. The checks for whether another region/block header could be present are subtracting the size from the current offset. Obviously we should instead subtract the offset from the size. The checks for whether the region/block data fit in the file are adding the data size to the current offset and header size, without checking for integer overflow. Rearrange these so that overflow is impossible. Signed-off-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Acked-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Tested-by:
-
Steve Wise authored
commit f55688c4 upstream. If the RECV CQE is in error, ignore the MSN check. This was causing recvs that were flushed into the sw cq to be completed with the wrong status (BAD_MSN instead of FLUSHED). Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Steven Rostedt (VMware) authored
commit 45d8b80c upstream. Two info bits were added to the "commit" part of the ring buffer data page when returned to be consumed. This was to inform the user space readers that events have been missed, and that the count may be stored at the end of the page. What wasn't handled, was the splice code that actually called a function to return the length of the data in order to zero out the rest of the page before sending it up to user space. These data bits were returned with the length making the value negative, and that negative value was not checked. It was compared to PAGE_SIZE, and only used if the size was less than PAGE_SIZE. Luckily PAGE_SIZE is unsigned long which made the compare an unsigned compare, meaning the negative size value did not end up causing a large portion of memory to be randomly zeroed out. Fixes: 66a8cb95 ("ring-buffer: Add place holder recording of dropped events") Signed-off-by:
-
Jing Xia authored
commit 24f2aaf9 upstream. Double free of the ring buffer happens when it fails to alloc new ring buffer instance for max_buffer if TRACER_MAX_TRACE is configured. The root cause is that the pointer is not set to NULL after the buffer is freed in allocate_trace_buffers(), and the freeing of the ring buffer is invoked again later if the pointer is not equal to Null, as: instance_mkdir() |-allocate_trace_buffers() |-allocate_trace_buffer(tr, &tr->trace_buffer...) |-allocate_trace_buffer(tr, &tr->max_buffer...) // allocate fail(-ENOMEM),first free // and the buffer pointer is not set to null |-ring_buffer_free(tr->trace_buffer.buffer) // out_free_tr |-free_trace_buffers() |-free_trace_buffer(&tr->trace_buffer); //if trace_buffer is not null, free again |-ring_buffer_free(buf->buffer) |-rb_free_cpu_buffer(buffer->buffers[cpu]) // ring_buffer_per_cpu is null, and // crash in ring_buffer_per_cpu->pages Link: http://lkml.kernel.org/r/20171226071253.8968-1-chunyan.zhang@spreadtrum.com Fixes: 737223fb ("tracing: Consolidate buffer allocation code") Signed-off-by:
Jing Xia <jing.xia@spreadtrum.com> Signed-off-by:
Chunyan Zhang <chunyan.zhang@spreadtrum.com> Signed-off-by:
-
Steven Rostedt (VMware) authored
commit 4397f045 upstream. Jing Xia and Chunyan Zhang reported that on failing to allocate part of the tracing buffer, memory is freed, but the pointers that point to them are not initialized back to NULL, and later paths may try to free the freed memory again. Jing and Chunyan fixed one of the locations that does this, but missed a spot. Link: http://lkml.kernel.org/r/20171226071253.8968-1-chunyan.zhang@spreadtrum.com Fixes: 737223fb ("tracing: Consolidate buffer allocation code") Reported-by:
-
Steven Rostedt (VMware) authored
commit 6b7e633f upstream. The ring_buffer_read_page() takes care of zeroing out any extra data in the page that it returns. There's no need to zero it out again from the consumer. It was removed from one consumer of this function, but read_buffers_splice_read() did not remove it, and worse, it contained a nasty bug because of it. Fixes: 2711ca23 ("ring-buffer: Move zeroing out excess in page to ring buffer code") Signed-off-by:
-
Greg Kroah-Hartman authored
When building objtool, we get the warning: warning: objtool: x86 instruction decoder differs from kernel That's due to commit 2816c045 which was commit 12a78d43 upstream that modified arch/x86/lib/x86-opcode-map.txt without also updating the objtool copy. The objtool copy was updated in a much larger patch upstream, but we don't need all of that here, so just update the single file. If this gets too annoying, I'll just end up doing what we did for 4.14 and backport the whole series to keep this from happening again, but as this seems to be rare in the 4.9-stable series, this single patch should be fine. Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
- 29 Dec, 2017 12 commits
-
-
Greg Kroah-Hartman authored
-
Ben Hutchings authored
An UNKNOWN_VALUE is not supposed to be derived from a pointer, unless pointer leaks are allowed. Therefore, states_equal() must not treat a state with a pointer in a register as "equal" to a state with an UNKNOWN_VALUE in that register. This was fixed differently upstream, but the code around here was largely rewritten in 4.14 by commit f1174f77 "bpf/verifier: rework value tracking". The bug can be detected by the bpf/verifier sub-test "pointer/scalar confusion in state equality check (way 1)". Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Cc: Edward Cree <ecree@solarflare.com> Cc: Jann Horn <jannh@google.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net>
-
Yelena Krivosheev authored
commit 2eecb2e0 upstream. There are few reasons in mvneta_rx_swbm() function when received packet is dropped. mvneta_rx_error() should be called only if error bit [16] is set in rx descriptor. [gregory.clement@free-electrons.com: add fixes tag] Fixes: dc35a10f ("net: mvneta: bm: add support for hardware buffer management") Signed-off-by:
Yelena Krivosheev <yelena@marvell.com> Tested-by:
Dmitri Epshtein <dima@marvell.com> Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
-
Yelena Krivosheev authored
commit ca5902a6 upstream. When adding the RX queue association with each CPU, a typo was made in the mvneta_cleanup_rxqs() function. This patch fixes it. [gregory.clement@free-electrons.com: add commit log and fixes tag] Fixes: 2dcf75e2 ("net: mvneta: Associate RX queues with each CPU") Signed-off-by:
-
Yelena Krivosheev authored
commit 4423c18e upstream. When port connect to PHY in polling mode (with poll interval 1 sec), port and phy link status must be synchronize in order don't loss link change event. [gregory.clement@free-electrons.com: add fixes tag] Fixes: c5aff182 ("net: mvneta: driver for Marvell Armada 370/XP network unit") Signed-off-by:
-
Dan Williams authored
commit 19deaa21 upstream. The alignment checks at pfn driver startup fail to properly account for the 'start_pad' in the case where the namespace is misaligned relative to its internal alignment. This is typically triggered in 1G aligned namespace, but could theoretically trigger with small namespace alignments. When this triggers the kernel reports messages of the form: dax2.1: bad offset: 0x3c000000 dax disabled align: 0x40000000 Fixes: 1ee6667c ("libnvdimm, pfn, dax: fix initialization vs autodetect...") Reported-by:
Jane Chu <jane.chu@oracle.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Ravi Bangoria authored
commit f41d84dd upstream. It's theoretically possible that branch instructions recorded in BHRB (Branch History Rolling Buffer) entries have already been unmapped before they are processed by the kernel. Hence, trying to dereference such memory location will result in a crash. eg: Unable to handle kernel paging request for data at address 0xd000000019c41764 Faulting instruction address: 0xc000000000084a14 NIP [c000000000084a14] branch_target+0x4/0x70 LR [c0000000000eb828] record_and_restart+0x568/0x5c0 Call Trace: [c0000000000eb3b4] record_and_restart+0xf4/0x5c0 (unreliable) [c0000000000ec378] perf_event_interrupt+0x298/0x460 [c000000000027964] performance_monitor_exception+0x54/0x70 [c000000000009ba4] performance_monitor_common+0x114/0x120 Fix it by deferefencing the addresses safely. Fixes: 69123184 ("powerpc/perf: Fix setting of "to" addresses for BHRB") Suggested-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by:
Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Reviewed-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Chen-Yu Tsai authored
commit 61d2f2a0 upstream. Our MMC host driver now issues a reset, instead of just deasserting the reset control, since commit c34eda69 ("mmc: sunxi: Reset the device at probe time"). The sun9i-mmc clock driver does not support this, and will fail, which results in MMC not probing. This patch implements the reset callback by asserting the reset control, then deasserting it after a small delay. Fixes: 7a6fca87 ("clk: sunxi: Add driver for A80 MMC config clocks/resets") Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Acked-by:
Philipp Zabel <p.zabel@pengutronix.de> Acked-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20171218035751.20661-1-wens@csie.org Signed-off-by:
-
Paolo Bonzini authored
commit fae1a3e7 upstream. rsm_load_state_64() and rsm_enter_protected_mode() load CR3, then CR4 & ~PCIDE, then CR0, then CR4. However, setting CR4.PCIDE fails if CR3[11:0] != 0. It's probably easier in the long run to replace rsm_enter_protected_mode() with an emulator callback that sets all the special registers (like KVM_SET_SREGS would do). For now, set the PCID field of CR3 only after CR4.PCIDE is 1. Reported-by:
Laszlo Ersek <lersek@redhat.com> Tested-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Wanpeng Li authored
commit d73235d1 upstream. *** Guest State *** CR0: actual=0x0000000000000030, shadow=0x0000000060000010, gh_mask=fffffffffffffff7 CR4: actual=0x0000000000002050, shadow=0x0000000000000000, gh_mask=ffffffffffffe871 CR3 = 0x00000000fffbc000 RSP = 0x0000000000000000 RIP = 0x0000000000000000 RFLAGS=0x00000000 DR7 = 0x0000000000000400 ^^^^^^^^^^ The failed vmentry is triggered by the following testcase when ept=Y: #include <unistd.h> #include <sys/syscall.h> #include <string.h> #include <stdint.h> #include <linux/kvm.h> #include <fcntl.h> #include <sys/ioctl.h> long r[5]; int main() { r[2] = open("/dev/kvm", O_RDONLY); r[3] = ioctl(r[2], KVM_CREATE_VM, 0); r[4] = ioctl(r[3], KVM_CREATE_VCPU, 7); struct kvm_regs regs = { .rflags = 0, }; ioctl(r[4], KVM_SET_REGS, ®s); ioctl(r[4], KVM_RUN, 0); } X86 RFLAGS bit 1 is fixed set, userspace can simply clearing bit 1 of RFLAGS with KVM_SET_REGS ioctl which results in vmentry fails. This patch fixes it by oring X86_EFLAGS_FIXED during ioctl. Suggested-by:
Jim Mattson <jmattson@google.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Reviewed-by:
Quan Xu <quan.xu0@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Jim Mattson <jmattson@google.com> Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by:
-
Mika Westerberg authored
commit d2b3c353 upstream. Guenter Roeck reported an interrupt storm on a prototype system which is based on Cyan Chromebook. The root cause turned out to be a incorrectly configured pin that triggers spurious interrupts. This will be fixed in coreboot but currently we need to prevent the interrupt storm from happening by masking all interrupts (but not GPEs) on those systems. Link: https://bugzilla.kernel.org/show_bug.cgi?id=197953 Fixes: bcb48cca ("pinctrl: cherryview: Do not mask all interrupts in probe") Reported-and-tested-by:
Guenter Roeck <linux@roeck-us.net> Reported-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Ricardo Ribalda Delgado authored
commit 5a1314fa upstream. When the core is configured in C_SPI_MODE > 0, it integrates a lookup table that automatically configures the core in dual or quad mode based on the command (first byte on the tx fifo). Unfortunately, that list mode_?_memoy_*.mif does not contain all the supported commands by the flash. Since 4.14 spi-nor automatically tries to probe the flash using SFDP (command 0x5a), and that command is not part of the list_mode table. Whit the right combination of C_SPI_MODE and C_SPI_MEMORY this leads into a stall that can only be recovered with a soft rest. This patch detects this kind of stall and returns -EIO to the caller on those commands. spi-nor can handle this error properly: m25p80 spi0.0: Detected stall. Check C_SPI_MODE and C_SPI_MEMORY. 0x21 0x2404 m25p80 spi0.0: SPI transfer failed: -5 spi_master spi0: failed to transfer one message from queue m25p80 spi0.0: s25sl064p (8192 Kbytes) Signed-off-by:
Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by:
-
