- 11 May, 2016 3 commits
-
-
Greg Kurz authored
The KVM_MAX_VCPUS define provides the maximum number of vCPUs per guest, and also the upper limit for vCPU ids. This is okay for all archs except PowerPC which can have higher ids, depending on the cpu/core/thread topology. In the worst case (single threaded guest, host with 8 threads per core), it limits the maximum number of vCPUS to KVM_MAX_VCPUS / 8. This patch separates the vCPU numbering from the total number of vCPUs, with the introduction of KVM_MAX_VCPU_ID, as the maximal valid value for vCPU ids plus one. The corresponding KVM_CAP_MAX_VCPU_ID allows userspace to validate vCPU ids before passing them to KVM_CREATE_VCPU. This patch only implements KVM_MAX_VCPU_ID with a specific value for PowerPC. Other archs continue to return KVM_MAX_VCPUS instead. Suggested-by:
Radim Krcmar <rkrcmar@redhat.com> Signed-off-by:
Greg Kurz <gkurz@linux.vnet.ibm.com> Reviewed-by:
Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Greg Kurz authored
Commit c896939f ("KVM: use heuristic for fast VCPU lookup by id") added a return path that prevents vcpu ids to exceed KVM_MAX_VCPUS. This is a problem for powerpc where vcpu ids can grow up to 8*KVM_MAX_VCPUS. This patch simply reverses the logic so that we only try fast path if the vcpu id can be tried as an index in kvm->vcpus[]. The slow path is not affected by the change. Reviewed-by:
David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by:
Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by:
Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
Merge tag 'kvm-arm-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/ARM Changes for Linux v4.7 Reworks our stage 2 page table handling to have page table manipulation macros separate from those of the host systems as the underlying hardware page tables can be configured to be noticably different in layout from the stage 1 page tables used by the host. Adds 16K page size support based on the above. Adds a generic firmware probing layer for the timer and GIC so that KVM initializes using the same logic based on both ACPI and FDT. Finally adds support for hardware updating of the access flag.
-
- 10 May, 2016 6 commits
-
-
Paolo Bonzini authored
Merge tag 'kvm-s390-next-4.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: features and fixes for 4.7 part2 - Use hardware provided information about facility bits that do not need any hypervisor activitiy - Add missing documentation for KVM_CAP_S390_RI - Some updates/fixes for handling cpu models and facilities
-
James Hogan authored
Add the necessary hazard barriers after disabling the FPU in kvm_lose_fpu(), just to be safe. Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim KrÄmáÅ
™ " <rkrcmar@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by:Paolo Bonzini <pbonzini@redhat.com>
-
James Hogan authored
Reading the KVM_CAP_MIPS_FPU capability returns cpu_has_fpu, however this uses smp_processor_id() to read the current CPU capabilities (since some old MIPS systems could have FPUs present on only a subset of CPUs). We don't support any such systems, so work around the warning by using raw_cpu_has_fpu instead. We should probably instead claim not to support FPU at all if any one CPU is lacking an FPU, but this should do for now. Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim KrÄmáÅ
™ " <rkrcmar@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by:Paolo Bonzini <pbonzini@redhat.com>
-
James Hogan authored
There are a couple of places in KVM fault handling code which implicitly use smp_processor_id() via kvm_mips_get_kernel_asid() and kvm_mips_get_user_asid() from preemptable context. This is unsafe as a preemption could cause the guest kernel ASID to be changed, resulting in a host TLB entry being written with the wrong ASID. Fix by disabling preemption around the kvm_mips_get_*_asid() call and the corresponding kvm_mips_host_tlb_write(). Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim KrÄmáÅ
™ " <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by:Paolo Bonzini <pbonzini@redhat.com>
-
James Hogan authored
Writing CP0_Compare clears the timer interrupt pending bit (CP0_Cause.TI), but this wasn't being done atomically. If a timer interrupt raced with the write of the guest CP0_Compare, the timer interrupt could end up being pending even though the new CP0_Compare is nowhere near CP0_Count. We were already updating the hrtimer expiry with kvm_mips_update_hrtimer(), which used both kvm_mips_freeze_hrtimer() and kvm_mips_resume_hrtimer(). Close the race window by expanding out kvm_mips_update_hrtimer(), and clearing CP0_Cause.TI and setting CP0_Compare between the freeze and resume. Since the pending timer interrupt should not be cleared when CP0_Compare is written via the KVM user API, an ack argument is added to distinguish the source of the write. Fixes: e30492bb ("MIPS: KVM: Rewrite count/compare timer emulation") Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim KrÄmáÅ
™ " <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Cc: <stable@vger.kernel.org> # 3.16.x- Signed-off-by:Paolo Bonzini <pbonzini@redhat.com>
-
James Hogan authored
There's a particularly narrow and subtle race condition when the software emulated guest timer is frozen which can allow a guest timer interrupt to be missed. This happens due to the hrtimer expiry being inexact, so very occasionally the freeze time will be after the moment when the emulated CP0_Count transitions to the same value as CP0_Compare (so an IRQ should be generated), but before the moment when the hrtimer is due to expire (so no IRQ is generated). The IRQ won't be generated when the timer is resumed either, since the resume CP0_Count will already match CP0_Compare. With VZ guests in particular this is far more likely to happen, since the soft timer may be frozen frequently in order to restore the timer state to the hardware guest timer. This happens after 5-10 hours of guest soak testing, resulting in an overflow in guest kernel timekeeping calculations, hanging the guest. A more focussed test case to intentionally hit the race (with the help of a new hypcall to cause the timer state to migrated between hardware & software) hits the condition fairly reliably within around 30 seconds. Instead of relying purely on the inexact hrtimer expiry to determine whether an IRQ should be generated, read the guest CP0_Compare and directly check whether the freeze time is before or after it. Only if CP0_Count is on or after CP0_Compare do we check the hrtimer expiry to determine whether the last IRQ has already been generated (which will have pushed back the expiry by one timer period). Fixes: e30492bb ("MIPS: KVM: Rewrite count/compare timer emulation") Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim KrÄmáÅ
™ " <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Cc: <stable@vger.kernel.org> # 3.16.x- Signed-off-by:Paolo Bonzini <pbonzini@redhat.com>
-
- 09 May, 2016 10 commits
-
-
Catalin Marinas authored
The ARMv8.1 architecture extensions introduce support for hardware updates of the access and dirty information in page table entries. With VTCR_EL2.HA enabled (bit 21), when the CPU accesses an IPA with the PTE_AF bit cleared in the stage 2 page table, instead of raising an Access Flag fault to EL2 the CPU sets the actual page table entry bit (10). To ensure that kernel modifications to the page table do not inadvertently revert a bit set by hardware updates, certain Stage 2 software pte/pmd operations must be performed atomically. The main user of the AF bit is the kvm_age_hva() mechanism. The kvm_age_hva_handler() function performs a "test and clear young" action on the pte/pmd. This needs to be atomic in respect of automatic hardware updates of the AF bit. Since the AF bit is in the same position for both Stage 1 and Stage 2, the patch reuses the existing ptep_test_and_clear_young() functionality if __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG is defined. Otherwise, the existing pte_young/pte_mkold mechanism is preserved. The kvm_set_s2pte_readonly() (and the corresponding pmd equivalent) have to perform atomic modifications in order to avoid a race with updates of the AF bit. The arm64 implementation has been re-written using exclusives. Currently, kvm_set_s2pte_writable() (and pmd equivalent) take a pointer argument and modify the pte/pmd in place. However, these functions are only used on local variables rather than actual page table entries, so it makes more sense to follow the pte_mkwrite() approach for stage 1 attributes. The change to kvm_s2pte_mkwrite() makes it clear that these functions do not modify the actual page table entries. The (pte|pmd)_mkyoung() uses on Stage 2 entries (setting the AF bit explicitly) do not need to be modified since hardware updates of the dirty status are not supported by KVM, so there is no possibility of losing such information. Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Reviewed-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org>
-
Borislav Petkov authored
Apparently, we're not exporting BIT() to userspace. Reported-by:
Brooks Moses <bmoses@google.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com>
-
Alexander Yarygin authored
When a guest is initializing, KVM provides facility bits that can be successfully used by the guest. It's done by applying kvm_s390_fac_list_mask mask on host facility bits stored by the STFLE instruction. Facility bits can be one of two kinds: it's either a hypervisor managed bit or non-hypervisor managed. The hardware provides information which bits need special handling. Let's automatically passthrough to guests new facility bits, that don't require hypervisor support. Signed-off-by:
Alexander Yarygin <yarygin@linux.vnet.ibm.com> Reviewed-by:
David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by:
Eric Farman <farman@linux.vnet.ibm.com> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com>
-
Alexander Yarygin authored
Let's add hypervisor-managed facility-apportionment indications field to SCLP structs. KVM will use it to reduce maintenance cost of Non-Hypervisor-Managed facility bits. Signed-off-by:
Alexander Yarygin <yarygin@linux.vnet.ibm.com> Reviewed-by:
David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by:
Eric Farman <farman@linux.vnet.ibm.com> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com>
-
Alexander Yarygin authored
Some facility bits are in a range that is defined to be "ok for guests without any necessary hypervisor changes". Enable those bits. Signed-off-by:
Alexander Yarygin <yarygin@linux.vnet.ibm.com> Reviewed-by:
David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com>
-
David Hildenbrand authored
We forgot to document that capability, let's add documentation. Reviewed-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com>
-
David Hildenbrand authored
Some hardware variants will round the ibc value up/down themselves, others will report a validity intercept. Let's always round it up/down. This patch will also make sure that the ibc is set to 0 in case we don't have ibc support (lowest_ibc == 0). Reviewed-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com>
-
David Hildenbrand authored
We only have one cpuid for all VCPUs, so let's directly use the one in the cpu model. Also always store it directly as u64, no need for struct cpuid. Reviewed-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com>
-
David Hildenbrand authored
If we don't have SIGP SENSE RUNNING STATUS enabled for the guest, let's not enable interpretation so we can correctly report an invalid order. Reviewed-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com>
-
David Hildenbrand authored
Only enable PFMF interpretation if the necessary facility (EDAT1) is available, otherwise the pfmf handler in priv.c will inject an exception Reviewed-by:
Dominik Dingel <dingel@linux.vnet.ibm.com> Reviewed-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com>
-
- 04 May, 2016 2 commits
-
-
David Hildenbrand authored
While we can not fully fence of the Nonquiescing Key-Setting facility, we should as try our best to hide it. Reviewed-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com>
-
David Hildenbrand authored
We should never inject an exception after we manually rewound the PSW (to retry the ESSA instruction in this case). This will mess up the PSW. So this never worked and therefore never really triggered. Looking at the details, we don't even have to perform any validity checks. 1. Bits 52-63 of an entry are stored as 0 by the hardware. 2. We are dealing with absolute addresses but only check for the prefix starting at address 0. This isn't correct and doesn't make much sense, cpus could still zap the prefix of other cpus. But as prefix pages cannot be swapped out without a notifier being called for the affected VCPU, a zap can never remove a protected prefix. Reviewed-by:
Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by:
David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com>
-
- 03 May, 2016 11 commits
-
-
Wanpeng Li authored
Guest should only trust data to be valid when version haven't changed before and after reads of steal time. Besides not changing, it has to be an even number. Hypervisor may write an odd number to version field to indicate that an update is in progress. kvm_steal_clock() in guest has already done the read side, make write side in hypervisor more robust by following the above rule. Reviewed-by:
Wincy Van <fanwenyi0529@gmail.com> Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com>
-
Julien Grall authored
The only call of arch_timer_get_timecounter (in KVM) has been removed. Signed-off-by:
Julien Grall <julien.grall@arm.com> Acked-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org>
-
Julien Grall authored
Currently, the firmware tables are parsed 2 times: once in the GIC drivers, the other time when initializing the vGIC. It means code duplication and make more tedious to add the support for another firmware table (like ACPI). Use the recently introduced helper gic_get_kvm_info() to get information about the virtual GIC. With this change, the virtual GIC becomes agnostic to the firmware table and KVM will be able to initialize the vGIC on ACPI. Signed-off-by:
Julien Grall <julien.grall@arm.com> Reviewed-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org>
-
Julien Grall authored
The firmware table is currently parsed by the virtual timer code in order to retrieve the virtual timer interrupt. However, this is already done by the arch timer driver. To avoid code duplication, use the newly function arch_timer_get_kvm_info() which return all the information required by the virtual timer code. Signed-off-by:
Julien Grall <julien.grall@arm.com> Acked-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org>
-
Julien Grall authored
Fill up the recently introduced gic_kvm_info with the hardware information used for virtualization. Signed-off-by:
Julien Grall <julien.grall@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org>
-
Julien Grall authored
The ACPI code requires to use global variables in order to collect information from the tables. To make clear those variables are ACPI specific, gather all of them in a single structure. Furthermore, even if some of the variables are not marked with __initdata, they are all only used during the initialization. Therefore, the new variable, which hold the structure, can be marked with __initdata. Signed-off-by:
Julien Grall <julien.grall@arm.com> Acked-by:
Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by:
Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org>
-
Julien Grall authored
Currently, most of the pr_* messages in the GICv3 driver don't have a prefix. Add one to make clear where the messages come from. Signed-off-by:
Julien Grall <julien.grall@arm.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org>
-
Julien Grall authored
For now, the firmware tables are parsed 2 times: once in the GIC drivers, the other timer when initializing the vGIC. It means code duplication and make more tedious to add the support for another firmware table (like ACPI). Introduce a new structure and set of helpers to get/set the virtual GIC information. Also fill up the structure for GICv2. Signed-off-by:
Julien Grall <julien.grall@arm.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org>
-
Julien Grall authored
The ACPI code requires to use global variables in order to collect information from the tables. For now, a single global variable is used, but more will be added in a subsequent patch. To make clear they are ACPI specific, gather all the information in a single structure. Signed-off-by:
Julien Grall <julien.grall@arm.com> Acked-by:
Christofer Dall <christoffer.dall@linaro.org> Acked-by:
Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org>
-
Julien Grall authored
Currently, the firmware table is parsed by the virtual timer code in order to retrieve the virtual timer interrupt. However, this is already done by the arch timer driver. To avoid code duplication, extend arch_timer_kvm_info to get the virtual IRQ. Note that the KVM code will be modified in a subsequent patch. Signed-off-by:
Julien Grall <julien.grall@arm.com> Acked-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org>
-
Julien Grall authored
Introduce a structure which are filled up by the arch timer driver and used by the virtual timer in KVM. The first member of this structure will be the timecounter. More members will be added later. A stub for the new helper isn't introduced because KVM requires the arch timer for both ARM64 and ARM32. The function arch_timer_get_timecounter is kept for the time being and will be dropped in a subsequent patch. Signed-off-by:
Julien Grall <julien.grall@arm.com> Acked-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org>
-
- 29 Apr, 2016 2 commits
-
-
Bruce Rogers authored
Commit d28bc9dd reversed the order of two lines which initialize cr0, allowing the current (old) cr0 value to mess up vcpu initialization. This was observed in the checks for cr0 X86_CR0_WP bit in the context of kvm_mmu_reset_context(). Besides, setting vcpu->arch.cr0 after vmx_set_cr0() is completely redundant. Change the order back to ensure proper vcpu initialization. The combination of booting with ovmf firmware when guest vcpus > 1 and kvm's ept=N option being set results in a VM-entry failure. This patch fixes that. Fixes: d28bc9dd ("KVM: x86: INIT and reset sequences are different") Cc: stable@vger.kernel.org Signed-off-by:
Bruce Rogers <brogers@suse.com> Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com>
-
Marc Zyngier authored
The ARM architecture mandates that when changing a page table entry from a valid entry to another valid entry, an invalid entry is first written, TLB invalidated, and only then the new entry being written. The current code doesn't respect this, directly writing the new entry and only then invalidating TLBs. Let's fix it up. Cc: <stable@vger.kernel.org> Reported-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org>
-
- 25 Apr, 2016 1 commit
-
-
Eric Engestrom authored
Signed-off-by:
Eric Engestrom <eric@engestrom.ch> Acked-by:
Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com>
-
- 21 Apr, 2016 5 commits
-
-
Suzuki K Poulose authored
Now that we can handle stage-2 page tables independent of the host page table levels, wire up the 16K page support. Cc: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Suzuki K Poulose <suzuki.poulose@arm.com>
-
Suzuki K Poulose authored
Now that we don't have any fake page table levels for arm64, cleanup the common code to get rid of the dead code. Cc: Marc Zyngier <marc.zyngier@arm.com> Acked-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Suzuki K Poulose <suzuki.poulose@arm.com>
-
Suzuki K Poulose authored
On arm64, the hardware supports concatenation of upto 16 tables, at entry level for stage2 translations and we make use that whenever possible. This could lead to reduced number of translation levels than the normal (stage1 table) table. Also, since the IPA(40bit) is smaller than the some of the supported VA_BITS (e.g, 48bit), there could be different number of levels in stage-1 vs stage-2 tables. To reuse the kernel host page table walker for stage2 we have been using a fake software page table level, not known to the hardware. But with 16K translations, there could be upto 2 fake software levels (with 48bit VA and 40bit IPA), which complicates the code. Hence, we want to get rid of the hack. Now that we have explicit accessors for hyp vs stage2 page tables, define the stage2 walker helpers accordingly based on the actual table used by the hardware. Once we know the number of translation levels used by the hardware, it is merely a job of defining the helpers based on whether a particular level is folded or not, looking at the number of levels. Some facts before we calculate the translation levels: 1) Smallest page size supported by arm64 is 4K. 2) The minimum number of bits resolved at any page table level is (PAGE_SHIFT - 3) at intermediate levels. Both of them implies, minimum number of bits required for a level change is 9. Since we can concatenate upto 16 tables at stage2 entry, the total number of page table levels used by the hardware for resolving N bits is same as that for (N - 4) bits (with concatenation), as there cannot be a level in between (N, N-4) as per the above rules. Hence, we have STAGE2_PGTABLE_LEVELS = PGTABLE_LEVELS(KVM_PHYS_SHIFT - 4) With the current IPA limit (40bit), for all supported translations and VA_BITS, we have the following condition (even for 36bit VA with 16K page size): CONFIG_PGTABLE_LEVELS >= STAGE2_PGTABLE_LEVELS. So, for e.g, if PUD is present in stage2, it is present in the hyp(host). Hence, we fall back to the host definition if we find that a level is not folded. Otherwise we redefine it accordingly. A build time check is added to make sure the above condition holds. If this condition breaks in future, we can rearrange the host level helpers and fix our code easily. Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Suzuki K Poulose <suzuki.poulose@arm.com>
-
Suzuki K Poulose authored
Now that we have switched to explicit page table routines, get rid of the obsolete kvm_* wrappers. Also, kvm_tlb_flush_vmid_by_ipa is now called only on stage2 page tables, hence get rid of the redundant check. Cc: Marc Zyngier <marc.zyngier@arm.com> Acked-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Suzuki K Poulose <suzuki.poulose@arm.com>
-
Suzuki K Poulose authored
Now that the hyp page table is handled by different set of routines, rename the original shared routines to stage2 handlers. Also make explicit use of the stage2 page table helpers. unmap_range has been merged to existing unmap_stage2_range. Cc: Marc Zyngier <marc.zyngier@arm.com> Acked-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Suzuki K Poulose <suzuki.poulose@arm.com>
-