- 30 Jun, 2017 1 commit
-
-
Laurent Pinchart authored
The old state is useful for drivers that need to perform operations at enable time that depend on the transition between the old and new states. While at it, rename the operation to .atomic_enable() to be consistent with .atomic_disable(), as the .enable() operation is used by atomic helpers only. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> # for sun4i Acked-by: Philipp Zabel <p.zabel@pengutronix.de> # for imx-drm and mediatek Acked-by: Alexey Brodkin <abrodkin@synopsys.com> # for arcpgu Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> # for atmel-hlcdc Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> # for hdlcd and mali-dp Acked-by: Stefan Agner <stefan@agner.ch> # for fsl-dcu Tested-by: Philippe Cornu <philippe.cornu@st.com> # for stm Acked-by: Philippe Cornu <philippe.cornu@st.com> # for stm Acked-by: Vincent Abriou <vincent.abriou@st.com> # for sti Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> # for vmwgfx Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170630093646.7928-2-laurent.pinchart+renesas@ideasonboard.com
-
- 29 Jun, 2017 7 commits
-
-
Chris Wilson authored
Reduce the list iteration when incrementing the timeline by storing the fences in increasing order. v2: Prevent spinlock recursion on free during create v3: Fixup rebase conflict inside comments that escaped the compiler. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Sean Paul <seanpaul@chromium.org> Cc: Gustavo Padovan <gustavo@padovan.org> Reviewed-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170629211253.22766-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
The sync_pt were not adding themselves atomically to the timeline lists, corruption imminent. Only a single list is required to track the unsignaled sync_pt, so reduce it and rename the lock more appropriately along with using idiomatic names to distinguish a list from links along it. v2: Prevent spinlock recursion on free during create (next patch) and fixup crossref in kerneldoc Signed-off-by:
-
Chris Wilson authored
Since sync_pt is only allocated from a single location and is no longer the base class for fences (that is struct dma_fence) it no longer needs a generic unsized allocator. Signed-off-by:
-
Chris Wilson authored
If we know the context under which we are called, then we can use the simpler form of spin_lock_irq (saving the save/restore). Signed-off-by:
-
Chris Wilson authored
The timeline is u32, which limits any single advance to INT_MAX so that we can detect all fences that need signaling. Signed-off-by:
-
Chris Wilson authored
Use the canonical __dma_fence_is_later() to compare the fence seqno against the timeline seqno to check if the fence is signaled. Signed-off-by:
-
Chris Wilson authored
Often we have the task of comparing two seqno known to be on the same context, so provide a common __dma_fence_is_later(). Signed-off-by:
-
- 28 Jun, 2017 10 commits
-
-
Dan Carpenter authored
"connector" is the list iterator and it can't be NULL. It causes a static checker warning because we dereference the iterator to get the next item in the list. Let's remove this check. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Laurent Pinchart authored
The CRTC helper .commit() operation is legacy code, the atomic helpers prefer the .enable() operation. Replace the .commit() helper operation with .enable() in the driver. Signed-off-by:
-
Laurent Pinchart authored
The CRTC .prepare() helper operation is part of the legacy helpers and is deprecated in favour of the .disable() helper operation. As the vmwgfx driver provides a .disable() helper operation, and as the .prepare() helper operation implementation is empty, we can remove it. Signed-off-by:
-
Laurent Pinchart authored
The CRTC helper .commit() operation is legacy code, the atomic helpers prefer the .enable() operation. Replace the .commit() helper operation with .enable() in the driver. Signed-off-by:
-
Laurent Pinchart authored
The CRTC .dpms() helper operation is called by the atomic helpers only when no .prepare(), .atomic_disable() or .disable() operation is provided. As the qxl driver provides a .disable() operation, the .dpms() operation is unused and can be removed. Signed-off-by:
-
Laurent Pinchart authored
The CRTC helper .prepare() operation is legacy code, the atomic helpers prefer the .disable() operation. As the arcpgu driver implements the .disable() and .prepare() operations identicallly, .prepare() can be removed. Signed-off-by:
-
Laurent Pinchart authored
The CRTC helper .commit() operation is legacy code, the atomic helpers prefer the .enable() operation. As the arcpgu driver implements the .enable() operation, .commit() is never used and can be removed. Signed-off-by:
-
Daniel Vetter authored
There's no reason for drivers to call this, and all the ones I've removed looked very fishy: - Proper quiescenting of the vblank machinery should be done by calling drm_crtc_vblank_off(), which is best done by shutting down the entire display engine with drm_atomic_helper_shutdown. - Releasing of allocated memory is done by the core already, it calls drm_vblank_cleanup as a fallback. - drm_vblank_cleanup also has checks for drivers which forget to clean up vblank interrupts. This essentially reverts commit e77cef9c Author: Jerome Glisse <jglisse@redhat.com> Date: Thu Jan 7 15:39:13 2010 +0100 drm: Avoid calling vblank function is vblank wasn't initialized which was done to fix a bug in radeon code with msi interrupts: commit 003e69f9 Author: Jerome Glisse <jglisse@redhat.com> Date: Thu Jan 7 15:39:14 2010 +0100 drm/radeon/kms: Don't try to enable IRQ if we have no handler installed Afaict from digging around in old code, this was needed to avoid blowing up in the ums fallback, and has stopped serving it's purpose long ago - if irq init fails, the driver fails to load, and there's really no way to blow up anymore. Long story short, this was most likely a small ums compat/fallback hack that became a thing of it's own and got cargo-cult duplicated all over the drm codebase for essentially no gain at all. v2: Mention that for drivers with a ->release callback cleanup is handled by drm_dev_fini() (Thierry). Cc: Thierry Reding <treding@nvidia.com> Acked-by:
Thierry Reding <treding@nvidia.com> Cc: Jerome Glisse <jglisse@redhat.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170626161949.25629-2-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
This was accidentally restored in commit de5cc815 Author: Liviu Dudau <Liviu.Dudau@arm.com> Date: Tue Jun 6 15:05:21 2017 +0100 drm/arm: hdlcd: Set the CRTC's port before binding the encoder Fixes: de5cc815 ("drm/arm: hdlcd: Set the CRTC's port before binding the encoder.") Cc: Liviu Dudau <Liviu.Dudau@arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Cc: Mali DP Maintainers <malidp@foss.arm.com> Acked-by:
Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by:
-
Andrey Grodzovsky authored
Problem : While running IGT kms_atomic_transition test suite i encountered a hang in drmHandleEvent immediately following an atomic_commit. After dumping the atomic state I relized that in this case there was not even one CRTC attached to the state and only disabled planes. This probably due to a commit which hadn't changed any property which would require attaching crtc state. This means drmHandleEvent will never wake up from read since without CRTC in atomic state the event fd will not be signaled. Fix: Protect against this issue by failing atomic_commit early in drm_mode_atomic_commit where such probelm can be identified. v2: Fix typos and extra newlines. Change-Id: I3ee28ffae35fd1e8bfe553146c44da53da02e6f8 Signed-off-by:
Andrey Grodzovsky <Andrey.Grodzovsky@amd.com> Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Acked-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
-
- 27 Jun, 2017 3 commits
-
-
Sean Paul authored
Required for Daniel's drm_vblank_cleanup cleanup
-
Daniel Vetter authored
The crtc->commit_lock only protects commit_list and commit_entry. If we chase the pointer from the drm_atomic_state update structure, then we don't need any locks (since we hold a reference already). Simplify the locking accordingly. Noticed while reviewing a patch from Boris. Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by:
-
Daniel Vetter authored
Again stopping the vblank before uninstalling the irq handler is kinda the wrong way round, but the fb_off stuff should take care of disabling the dsiplay at least in most cases. So drop the drm_vblank_cleanup code since it's not really doing anything, it looks all cargo-culted. v2: Appease gcc better. v3: Simplify code (Sean Paul) Cc: Sinclair Yeh <syeh@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
-
- 26 Jun, 2017 9 commits
-
-
Dave Airlie authored
Linux 4.12-rc7 Needed at least rc6 for drm-misc-next-fixes, may as well go to rc7
-
Daniel Vetter authored
udl doesn't shut down the display, so stopping the vblank isn't going to do much good either. Just drop it. Cc: Dave Airlie <airlied@redhat.com> Reviewed-by:
-
Daniel Vetter authored
Either not relevant (in the load error paths) or done better already (in the unload code, by calling drm_atomic_helper_shutdown). Drop it. Cc: Mark Yao <mark.yao@rock-chips.com> Reviewed-by:
-
Daniel Vetter authored
nouveau_display_vblank_fini is called in the load error path (where it doesn't matter) and module unload (where vblanks have been shut down correctly already through drm_vblank_off), we can drop it. Cc: Ben Skeggs <bskeggs@redhat.com> Cc: nouveau@lists.freedesktop.org Reviewed-by:
-
Daniel Vetter authored
Seems entirely cargo-culted. Cc: CK Hu <ck.hu@mediatek.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by:
-
Daniel Vetter authored
On the load error path we can't have pending vblank interrupts, and on unload we already call drm_atomic_helper_shutdown beforehand! So all good to nuke it. Reviewed-by:
-
Daniel Vetter authored
Again we probably want a drm_atomic_helper_shutdown somewhere, but that's a bit more analysis. Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com> Cc: Chen Feng <puck.chen@hisilicon.com> Reviewed-by:
-
Daniel Vetter authored
So this seems to be the first driver that does it the right way round, so fix it up by calling drm_atomic_helper_shutdown instead. We need to do that before the last kms user is gone (fbdev emulation), but before we start shutting down hw stuff like interrupts. Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com> Cc: Chen Feng <puck.chen@hisilicon.com> Reviewed-by:
-
Linus Torvalds authored
-
- 25 Jun, 2017 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fix from Thomas Gleixner: "A single fix to unbreak the vdso32 build for 64bit kernels caused by excess #includes in the mshyperv header" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mshyperv: Remove excess #includes from mshyperv.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: "A few fixes for timekeeping and timers: - Plug a subtle race due to a missing READ_ONCE() in the timekeeping code where reloading of a pointer results in an inconsistent callback argument being supplied to the clocksource->read function. - Correct the CLOCK_MONOTONIC_RAW sub-nanosecond accounting in the time keeping core code, to prevent a possible discontuity. - Apply a similar fix to the arm64 vdso clock_gettime() implementation - Add missing includes to clocksource drivers, which relied on indirect includes which fails in certain configs. - Use the proper iomem pointer for read/iounmap in a probe function" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: arm64/vdso: Fix nsec handling for CLOCK_MONOTONIC_RAW time: Fix CLOCK_MONOTONIC_RAW sub-nanosecond accounting time: Fix clock->read(clock) race around clocksource changes clocksource: Explicitly include linux/clocksource.h when needed clocksource/drivers/arm_arch_timer: Fix read and iounmap of incorrect variable -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Thomas Gleixner: "Three fixlets for perf: - Return the proper error code if aux buffers for a event are not supported. - Calculate the probe offset for inlined functions correctly - Update the Skylake DTLB load/store miss event so it can count 1G TLB entries as well" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf probe: Fix probe definition for inlined functions perf/x86/intel: Add 1G DTLB load/store miss support for SKL perf/aux: Correct return code of rb_alloc_aux() if !has_aux(ev) -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fix from Thomas Gleixner: "A single fix for the MIPS GIC to prevent ftrace recursion" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/mips-gic: Mark count and compare accessors notrace
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input fixes from Dmitry Torokhov: - a quirk to i8042 to ignore timeout bit on Lifebook AH544 - a fixup to Synaptics RMI function 54 that was breaking some Dells - a fix for memory leak in soc_button_array driver * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: synaptics-rmi4 - only read the F54 query registers which are used Input: i8042 - add Fujitsu Lifebook AH544 to notimeout list Input: soc_button_array - fix leaking the ACPI button descriptor buffer
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
Pull SCSI target fixes from Nicholas Bellinger: "Here are the target-pending fixes for v4.12-rc7 that have been queued up for the last 2 weeks. This includes: - Fix a TMR related kref underflow detected by the recent refcount_t conversion in upstream. - Fix a iscsi-target corner case during explicit connection logout timeout failure. - Address last fallout in iscsi-target immediate data handling from v4.4 target-core now allowing control CDB payload underflow" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: iscsi-target: Reject immediate data underflow larger than SCSI transfer length iscsi-target: Fix delayed logout processing greater than SECONDS_FOR_LOGOUT_COMP target: Fix kref->refcount underflow in transport_cmd_finish_abort
-
- 24 Jun, 2017 4 commits
-
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: "Nothing scary, just some random fixes: - fix warnings of host programs - fix "make tags" when COMPILED_SOURCE=1 is specified along with O= - clarify help message of C=1 option - fix dependency for ncurses compatibility check - fix "make headers_install" for fakechroot environment" * tag 'kbuild-fixes-v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: fix sparse warnings in nconfig kbuild: fix header installation under fakechroot environment kconfig: Check for libncurses before menuconfig Kbuild: tiny correction on `make help` tags: honor COMPILED_SOURCE with apart output directory genksyms: add printf format attribute to error_with_pos()
-
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespaceLinus Torvalds authored
Pull timer fix from Eric Biederman: "This fixes an issue of confusing injected signals with the signals from posix timers that has existed since posix timers have been in the kernel. This patch is slightly simpler than my earlier version of this patch as I discovered in testing that I had misspelled "#ifdef CONFIG_POSIX_TIMERS". So I deleted that unnecessary test and made setting of resched_timer uncondtional. I have tested this and verified that without this patch there is a nasty hang that is easy to trigger, and with this patch everything works properly" Thomas Gleixner dixit: "It fixes the problem at hand and covers the ptrace case as well, which I missed. Reviewed-and-tested-by: Thomas Gleixner <tglx@linutronix.de>" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: signal: Only reschedule timers on signals timers have sent
-
Thomas Gleixner authored
A recent commit included linux/slab.h in linux/irq.h. This breaks the build of vdso32 on a 64-bit kernel. The reason is that linux/irq.h gets included into the vdso code via linux/interrupt.h which is included from asm/mshyperv.h. That makes the 32-bit vdso compile fail, because slab.h includes the pgtable headers for 64-bit on a 64-bit build. Neither linux/clocksource.h nor linux/interrupt.h are needed in the mshyperv.h header file itself - it has a dependency on <linux/atomic.h>. Remove the includes and unbreak the build. Reported-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: devel@linuxdriverproject.org Fixes: dee863b5 ("hv: export current Hyper-V clocksource") Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1706231038460.2647@nanosSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: "Some more powerpc fixes for 4.12. Most of these actually came in last week but got held up for some more testing. - three fixes for kprobes/ftrace/livepatch interactions. - properly handle data breakpoints when using the Radix MMU. - fix for perf sampling of registers during call_usermodehelper(). - properly initialise the thread_info on our emergency stacks - add an explicit flush when doing TLB invalidations for a process using NPU2. Thanks to: Alistair Popple, Naveen N. Rao, Nicholas Piggin, Ravi Bangoria, Masami Hiramatsu" * tag 'powerpc-4.12-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64: Initialise thread_info for emergency stacks powerpc/powernv/npu-dma: Add explicit flush when sending an ATSD powerpc/perf: Fix oops when kthread execs user process powerpc/64s: Handle data breakpoints in Radix mode powerpc/kprobes: Skip livepatch_handler() for jprobes powerpc/ftrace: Pass the correct stack pointer for DYNAMIC_FTRACE_WITH_REGS powerpc/kprobes: Pause function_graph tracing during jprobes handling
-
