- 11 May, 2022 11 commits
-
-
Ping-Ke Shih authored
Dump new region 0x3000 to 0x33ff to help debug. Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220506120216.58567-5-pkshih@realtek.com
-
Ping-Ke Shih authored
EDCCA signal can block transmitting in certain situation, so ignore this signal and use others to decide transmitting time. Signed-off-by:
-
Ping-Ke Shih authored
Set proper setting according to RX quota, and then it doesn't break buffer due to size of received packet exceeding buffer size. Signed-off-by:
-
Hsuan Hung authored
Modify NBI and PD boost settings according to different primary channels. This setting can decrease the false alarm induced by DC. Signed-off-by:
Hsuan Hung <hsuan8331@realtek.com> Signed-off-by:
-
Jiapeng Chong authored
Clean up the following smatch warning: drivers/ssb/pci.c:917 ssb_pci_sprom_get() warn: ignoring unreachable code. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Acked-by:
Michael Büsch <m@bues.ch> Signed-off-by:
-
Pavel Löbl authored
This allows firmware to provide MAC address using device tree. Like in case there is no MAC burned in wlan NVRAM. Signed-off-by:
Pavel Löbl <pavel@loebl.cz> Signed-off-by:
-
Ajay Singh authored
'vmm_table' array contains the size of data buffer length including host header length. In 'vmm_table' array, the Zero value means the end of vmm_entries that needs to transfer to firmware which is calculated based on VMM free size in firmware. Use 'vmm_table' valid entry check before fetching the entry from TX queue to only copy valid number of entries to avoid possible NULL pointer exception observed sometimes during large file transfers. Signed-off-by:
Ajay Singh <ajay.kathat@microchip.com> Signed-off-by:
-
Ajay Singh authored
Use 'u64' instead of 'u32' for the cookie variable as expected by cfg80211 callback function argument. Signed-off-by:
-
Ajay Singh authored
Monitor(mon.) interface is used for handling the AP mode and 'ieee80211_ptr' reference is not getting set for it. Like earlier implementation, use register_netdevice() instead of cfg80211_register_netdevice() which expects valid 'ieee80211_ptr' reference to avoid the possible crash. Fixes: 2fe8ef10 ("cfg80211: change netdev registration/unregistration semantics") Signed-off-by:
-
Ajay Singh authored
The function number was not correct(reset to 0) when host resumes from suspend state. Use hardcoded value in function base information register(FBR base address) to re-initialize correctly on host resume. Signed-off-by:
-
Ajay Singh authored
Increase firmware version array size to hold complete version information. The firmware commit id(Build:) information is also part of the firmware version string. Firmware version format: WILC_WIFI_FW_REL_XX_XX Build: XXXXX e.g. WILC_WIFI_FW_REL_15_6 Build: 12804 Signed-off-by:
-
- 09 May, 2022 2 commits
-
-
Andy Shevchenko authored
GPIO library now accepts fwnode as a firmware node, so switch the driver to use it. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Chin-Yen Lee authored
Fine tune algorithm of adaptivity sensitivity to avoid disconnecting from AP suddenly in field. Signed-off-by:
Chin-Yen Lee <timlee@realtek.com> Signed-off-by:
-
- 06 May, 2022 4 commits
-
-
H. Nikolaus Schaller authored
With introduction of vmap'ed stacks, stack parameters can no longer be used for DMA and now leads to kernel panic. It happens at several places for the wl1251 (e.g. when accessed through SDIO) making it unuseable on e.g. the OpenPandora. We solve this by allocating temporary buffers or use wl1251_read32(). Tested on v5.18-rc5 with OpenPandora. Fixes: a1c510d0 ("ARM: implement support for vmap'ed stacks") Signed-off-by:
H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by:
-
Jakub Kicinski authored
qtnfmac chooses its own magic NAPI weight so switch to the new API created for those who don't use NAPI_POLL_WEIGHT. Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Jakub Kicinski authored
Switch to the new API not requiring passing in NAPI_POLL_WEIGHT. Signed-off-by:
-
Jakub Kicinski authored
Switch to the new API not requiring passing in NAPI_POLL_WEIGHT. Signed-off-by:
-
- 04 May, 2022 21 commits
-
-
Muna Sinada authored
Allow userspace to disable EHT mode. This forces EHT capable interfaces to disable during association. Signed-off-by:
Muna Sinada <quic_msinada@quicinc.com> Signed-off-by:
Aloka Dixit <quic_alokad@quicinc.com> Link: https://lore.kernel.org/r/20220323224636.20211-2-quic_alokad@quicinc.com [remove stray message change] Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Muna Sinada authored
Allow userspace to disable EHT mode during association. Signed-off-by:
-
Felix Fietkau authored
In client mode, we can't connect to hidden SSID APs or SSIDs not advertised in beacons on DFS channels, since we're forced to passive scan. Fix this by sending out a probe request immediately after the first beacon, if active scan was requested by the user. Cc: stable@vger.kernel.org Reported-by:
Catrinel Catrinescu <cc@80211.de> Signed-off-by:
Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20220420104907.36275-1-nbd@nbd.nameSigned-off-by:
-
Hangyu Hua authored
If statement is meaningless because the code will goto out regardless of whether fast_tx is NULL or not. Signed-off-by:
Hangyu Hua <hbh25y@gmail.com> Link: https://lore.kernel.org/r/20220413091902.27438-1-hbh25y@gmail.comSigned-off-by:
-
Ping-Ke Shih authored
Follow IEEE 802.11-21 that HTC subfield masked to 0 for all data frames containing a QoS Control field. It also defines the AAD length depends on QC and A4 fields, so change logic to determine length accordingly. Signed-off-by:
-
Dimitri John Ledkov authored
Add MODULE_FIRMWARE declarations for regulatory.db and regulatory.db.p7s such that userspace tooling can discover and include these files. Cc: stable@vger.kernel.org Signed-off-by:
Dimitri John Ledkov <dimitri.ledkov@canonical.com> Link: https://lore.kernel.org/r/20220414125004.267819-1-dimitri.ledkov@canonical.comSigned-off-by:
-
Johannes Berg authored
Since internal_flags is only 8 bits, we can only have one more internal flag. However, we can obviously never use all of possible the combinations, in fact, we only use 14 of them (including no flags). Since we want more flags for MLO (multi-link operation) in the future, refactor the code to use a flags selector, so wrap all of the .internal_flags assignments in a IFLAGS() macro which selects the combination according to the pre- defined list of combinations. When we need a new combination, we'll have to add it, but again we will never use all possible combinations. Signed-off-by:
-
Johannes Berg authored
It's not necessary to hold the RTNL across color change requests, since all the inner locking needs only the wiphy mutex which we already hold as well. Fixes: 0d2ab3ae ("nl80211: add support for BSS coloring") Link: https://lore.kernel.org/r/20220414140402.32e03e8c261b.I5e7dc6bc563a129b938c43298da6bb4e812400a5@changeidSigned-off-by:
-
Johannes Berg authored
We haven't used this function for years, since commit c781944b ("cfg80211: Remove unused cfg80211_can_use_iftype_chan()") which itself removed a function unused since commit 97dc94f1 ("cfg80211: remove channel_switch combination check"), almost eight years ago. Also remove the now unused enum cfg80211_chan_mode and some struct members that were only used for this function. Link: https://lore.kernel.org/r/20220412220958.1a191dca19d7.Ide4448f02d0e2f1ca2992971421ffc1933a5370a@changeidSigned-off-by:
-
Ping-Ke Shih authored
This initial vesion is usable now. It can support STA, AP and monitor modes, so we can add 8852ce to Kconfig and Makefile. We are still working on some features, such as deep power save, and BT coexistence. But, this version still can have a good WiFi-only performance already, and will continue to fine tune power consumption. Signed-off-by:
-
Ping-Ke Shih authored
To fix the compiler warning of clang with i386 config, but not complain by gcc: __write_ctrl(R_AX_PWR_RATE_CTRL, B_AX_FORCE_PWR_BY_RATE_VALUE_MASK, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/wireless/realtek/rtw89/rtw8852c.c:2621:13: note: expanded from macro '__write_ctrl' u32 _wrt = FIELD_PREP(__msk, _val); \ ^~~~~~~~~~~~~~~~~~~~~~~ include/linux/bitfield.h:114:3: note: expanded from macro 'FIELD_PREP' __BF_FIELD_CHECK(_mask, 0ULL, _val, "FIELD_PREP: "); \ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ include/linux/bitfield.h:71:53: note: expanded from macro '__BF_FIELD_CHECK' BUILD_BUG_ON_MSG(__bf_cast_unsigned(_mask, _mask) > \ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~ note: (skipping 1 expansions in backtrace; use -fmacro-backtrace-limit=0 to see all) include/linux/compiler_types.h:352:22: note: expanded from macro 'compiletime_assert' _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) ~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ include/linux/compiler_types.h:340:23: note: expanded from macro '_compiletime_assert' __compiletime_assert(condition, msg, prefix, suffix) ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ include/linux/compiler_types.h:332:9: note: expanded from macro '__compiletime_assert' if (!(condition)) \ ^~~~~~~~~ Reported-by:kernel test robot <lkp@intel.com> Signed-off-by:
-
Ping-Ke Shih authored
First one could affect SER because of false alarm event. Second one can affect spur elimination. Signed-off-by:
-
Ping-Ke Shih authored
Without this fix, it would cause IOT issue due to AID mismatch. Signed-off-by:
-
Ping-Ke Shih authored
By experiments, it spends ~45/1090~2480us to enter/leave low power mode, so the old polling interval 1000us can waste time. Use smaller polling interval depends on experimental results to reduce the time to transition state. Signed-off-by:
-
Ping-Ke Shih authored
The chip_info include BT coexistence tables, size and number of hardware components, and supported functions. Signed-off-by:
-
Ping-Ke Shih authored
Add to configure BT share RX path and related settings. Signed-off-by:
-
Ping-Ke Shih authored
The commit 16b44ed0 ("rtw89: add RF H2C to notify firmware") is to add firmware command, and this commit is to prepare the channels. Then, firmware can get proper channels. Signed-off-by:
-
Tetsuo Handa authored
Flushing system-wide workqueues is dangerous and will be forbidden. Replace system_highpri_wq with per "struct wfx_dev" bh_wq. Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by:
Jérôme Pouiller <jerome.pouiller@silabs.com> Signed-off-by:
-
Jakub Kicinski authored
Merge tag 'wireless-next-2022-05-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v5.19 First set of patches for v5.19 and this is a big one. We have two new drivers, a change in mac80211 STA API affecting most drivers and ath11k getting support for WCN6750. And as usual lots of fixes and cleanups all over. Major changes: new drivers - wfx: silicon labs devices - plfxlc: pureLiFi X, XL, XC devices mac80211 - host based BSS color collision detection - prepare sta handling for IEEE 802.11be Multi-Link Operation (MLO) support rtw88 - support TP-Link T2E devices rtw89 - support firmware crash simulation - preparation for 8852ce hardware support ath11k - Wake-on-WLAN support for QCA6390 and WCN6855 - device recovery (firmware restart) support for QCA6390 and WCN6855 - support setting Specific Absorption Rate (SAR) for WCN6855 - read country code from SMBIOS for WCN6855/QCA6390 - support for WCN6750 wcn36xx - support for transmit rate reporting to user space * tag 'wireless-next-2022-05-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (228 commits) rtw89: 8852c: rfk: add DPK rtw89: 8852c: rfk: add IQK rtw89: 8852c: rfk: add RX DCK rtw89: 8852c: rfk: add RCK rtw89: 8852c: rfk: add TSSI rtw89: 8852c: rfk: add LCK rtw89: 8852c: rfk: add DACK rtw89: 8852c: rfk: add RFK tables plfxlc: fix le16_to_cpu warning for beacon_interval rtw88: remove a copy of the NAPI_POLL_WEIGHT define carl9170: tx: fix an incorrect use of list iterator wil6210: use NAPI_POLL_WEIGHT for napi budget ath10k: remove a copy of the NAPI_POLL_WEIGHT define ath11k: Add support for WCN6750 device ath11k: Datapath changes to support WCN6750 ath11k: HAL changes to support WCN6750 ath11k: Add QMI changes for WCN6750 ath11k: Fetch device information via QMI for WCN6750 ath11k: Add register access logic for WCN6750 ath11k: Add HW params for WCN6750 ... ==================== Link: https://lore.kernel.org/r/20220503153622.C1671C385A4@smtp.kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Most drivers should not have to worry about selecting the right weight for their NAPI instances and pass NAPI_POLL_WEIGHT. It'd be best if we didn't require the argument at all and selected the default internally. This change prepares the ground for such reshuffling, allowing for a smooth transition. The following API should remain after the next release cycle: netif_napi_add() netif_napi_add_weight() netif_napi_add_tx() netif_napi_add_tx_weight() Where the _weight() variants take an explicit weight argument. I opted for a _weight() suffix rather than a __ prefix, because we use __ in places to mean that caller needs to also issue a synchronize_net() call. Signed-off-by:
-
Vladimir Oltean authored
Test basic (port-default, VLAN PCP and IP DSCP) QoS classification for Ocelot switches. Advanced QoS classification using tc filters is covered by tc_flower_chains.sh in the same directory. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20220502155424.4098917-1-vladimir.oltean@nxp.comSigned-off-by:
-
- 03 May, 2022 2 commits
-
-
Jakub Kicinski authored
Mat Martineau says: ==================== mptcp: Userspace path manager prerequisites This series builds upon the path manager mode selection changes merged in 4994d4fa ("Merge branch 'mptcp-path-manager-mode-selection'") to further modify the path manager code in preparation for adding the new netlink commands to announce/remove advertised addresses and create/destroy subflows of an MPTCP connection. The third and final patch series for the userspace path manager will implement those commands as discussed in https://lore.kernel.org/netdev/23ff3b49-2563-1874-fa35-3af55d3088e7@linux.intel.com/#r Patches 1, 5, and 7 remove some internal constraints on path managers (in general) without changing in-kernel PM behavior. Patch 2 adds a self test to validate MPTCP address advertisement ack behavior. Patches 3, 4, and 6 add new attributes to existing MPTCP netlink events and track internal state for populating those attributes. ==================== Link: https://lore.kernel.org/r/20220502205237.129297-1-mathew.j.martineau@linux.intel.comSigned-off-by:
-
Kishen Maloor authored
This change allows userspace PM implementations to reissue ADD_ADDR announcements (if necessary) based on their chosen policy. Acked-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Kishen Maloor <kishen.maloor@intel.com> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
