- 29 Dec, 2010 24 commits
-
-
Jean-François Moine authored
Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans de Goede authored
Generate a release button event when the button is still pressed when the stream stops. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans de Goede authored
gspca_xirlink_cit: Add support camera button Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans de Goede authored
At least on the ibm netcam pro frames have a 4 byte footer, take this into account when calculating sizeimage. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans de Goede authored
The following usb bandwidth allocation changes were made to the ibm netcam pro code: - Don't restart negotiation at max packet size on stop0, as that gets called by gspca_main during negotiation. Move this to sd_isoc_init. - Don't ask for full bandwidth when running at 160x120, that does not need full bandwidth - Make minimum acceptable bandwidth depend upon resolution [mchehab@redhat.com: Fix CodingStyle problems at switch statements] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans de Goede authored
Currently alloc_and_submit_int_urb() is setting gspca->int_urb as soon as the allocation has succeeded, but if the subsequent submit fails, the urb gets destroyed. And then later will get destroyed again in gspca_input_destroy_urb() because gspca->int_urb is set, leading to a double free. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans de Goede authored
Currently gspca supported usb-1.1 webcams for which we support the input button through an interrupt endpoint won't stream (not enough bandwidth error) when used through an USB-2.0 hub. After much debugging I've found out that the cause for this is that the ehci-sched.c schedeling code does not like it when there are already urb's scheduled when (large) isoc urbs are queued. By moving the submission of the interrupt urbs to after submitting the isoc urbs the camera starts working again through usb-2.0 hubs. Note that this does not fix isoc. streaming through a usb-hub while another 1.1 usb device (like the microphone of the same cam) is also active at the same time :( I've spend a long time analyzing the linux kernel ehci scheduler code, resulting in this (long) mail: http://www.spinics.net/lists/linux-usb/msg37982.html The conclusion of the following mail thread is that yes there are several issues when using usb-1.1 devices through a usb-2.0 hub, but these are not easily fixable in the current code. Fixing this in ehci-sched.c requires an almost full rewrite, which is not bound to happen anytime soon. So with this patch gspca driven usb-1.1 webcams will atleast work when connected through an usb-2.0 hub when the microphone is not used. As an added bonus this patch avoids extra destroy/create input urb cycles when we end up falling back to a lower speed alt setting because of bandwidth limitations. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Malcolm Priestley authored
DM04/QQBOX USB Timing change. Improved timing to avoid USB corruptions on some systems. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Malcolm Priestley authored
Corrected Firmware Information for LG on LME2510. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Malcolm Priestley authored
Improved frontend handling. Frontend now remains open at all times, with signal lock, snr & signal level polled from Interupt. Updated driver for DM04/QQBOX USB DVB-S BOXES to version 1.70. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Daniel Drake authored
If you suspend and resume during video capture, the video colours are corrupted on resume. This is because the sensor is being unconditionally powered off during the resume path. Only power down during resume if the camera is not in use, and correctly reconfigure the sensor during resume. Fixes http://dev.laptop.org/ticket/10190Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Joe Perches authored
Converted if (debug >= 2) printk(KERN_DEBUG... to if debug >= 2) dprintk(...) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Mauro Carvalho Chehab authored
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Mauro Carvalho Chehab authored
Although cx231xx has a very good IR support, already supported by mceusb driver, some designs decided to add a separate I2C microcontroller chip in order to handle IR. Due to that, add a glue to ir-kbd-i2c is needed, in order to support those devices. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Mauro Carvalho Chehab authored
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Mauro Carvalho Chehab authored
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Mauro Carvalho Chehab authored
By comparing the traffic between Pixelview (cx23102-based and Kworld (saa7134-based), the only difference is at register 0xd5. After some tests, It seems that it is used to change mode between serial and parallel. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Mauro Carvalho Chehab authored
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Mauro Carvalho Chehab authored
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Mauro Carvalho Chehab authored
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Mauro Carvalho Chehab authored
This adds the trivial bits to mb86a20s. As the driver won't touch at the channel/layer parameters, this may not be enough for receiving all channels, especially ISDB-Tsb, but the driver worked properly for receiving video channels on my tests. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Mauro Carvalho Chehab authored
This device uses an em2874B + Sharp 921 One Seg frontend. Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Mauro Carvalho Chehab authored
On our tests with Leadership ISDBT, the s921 frontend were not work. As its design contained some weird things, it ended to be easier to just re-write it, getting another frontend as an example (cx24123). As the old s921 driver weren't used, there's no regression. Some info from the old frontend were used as a way to double check the behavior that were noticed on the USB dumps retrieved from Leadership driver. Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Linus Torvalds authored
-
- 28 Dec, 2010 7 commits
-
-
Linus Torvalds authored
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: ring_buffer: Off-by-one and duplicate events in ring_buffer_read_page
-
Linus Torvalds authored
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86/microcode: Fix double vfree() and remove redundant pointer checks before vfree()
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI hotplug: Fix unexpected driver unregister in pciehp_acpi.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6Linus Torvalds authored
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: [media] v4l: soc-camera: fix multiple simultaneous user case
-
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmcLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: mmc: Fix re-probing with PM_POST_RESTORE notification mmc: atmel-mci: fix multiblock SDIO transfers mmc: at91_mci: fix multiblock SDIO transfers
-
Imre Kaloz authored
arm: export dma_set_coherent_mask While a regression was fixed with commit 710224fa (arm: fix "arm: fix pci_set_consistent_dma_mask for dmabounce devices"), a new one was introduced as dma_set_coherent_mask wasn't exported for modules. This patch takes care for this issue. Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Ahmed S. Darwish authored
The current code mis-calculates the ramoops header size, leading to an overflow over the next record at best, or over a non-allocated region at worst. Fix that calculation. Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com> Acked-by: Marco Stornelli <marco.stornelli@gmail.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 27 Dec, 2010 8 commits
-
-
Linus Torvalds authored
Merge branch 'nommu-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/nommu-2.6 * 'nommu-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/nommu-2.6: nommu: Provide stubbed alloc/free_vm_area() implementation. nommu: Fix up vmalloc_node() symbol export regression.
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds authored
* 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: intc: Initialize radix tree gfp mask explicitly. sh: Fix up SH7201 clkfwk build. sh: mach-se: Fix up SE7206 build. sh: Fix up SH4-202 clkfwk build.
-
Linus Torvalds authored
Merge branch 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6 * 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6: fbdev: sh_mobile_lcdc: increase maximum framebuffer size to support 1080p video: imxfb: Fix the maximum value for yres fb: fix overlapping test off-by-one. fbdev: sh-mobile: retrieve and propagate display sizes from EDID fbdev: sh-mobile: restore display size configuration
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-devLinus Torvalds authored
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: pata_cs5536: avoid implicit MSR API inclusion on x86-64
-
Guennadi Liakhovetski authored
LCDC hardware can support 1920x1080 formats, adjust the driver to cover them. Besides, instead of guessing some "reasonable" validity checks, only verify values in .fb_check_var(), that we are sure, we cannot support. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Fabio Estevam authored
MX27 and MX25 have 10 bits in the YMAX field of LCDC Size Register. Fix the maximum value for yres. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Jesper Juhl authored
In arch/x86/kernel/microcode_intel.c::generic_load_microcode() we have this: while (leftover) { ... if (get_ucode_data(mc, ucode_ptr, mc_size) || microcode_sanity_check(mc) < 0) { vfree(mc); break; } ... } if (mc) vfree(mc); This will cause a double free of 'mc'. This patch fixes that by just removing the vfree() call in the loop since 'mc' will be freed nicely just after we break out of the loop. There's also a second change in the patch. I noticed a lot of checks for pointers being NULL before passing them to vfree(). That's completely redundant since vfree() deals gracefully with being passed a NULL pointer. Removing the redundant checks yields a nice size decrease for the object file. Size before the patch: text data bss dec hex filename 4578 240 1032 5850 16da arch/x86/kernel/microcode_intel.o Size after the patch: text data bss dec hex filename 4489 240 984 5713 1651 arch/x86/kernel/microcode_intel.o Signed-off-by: Jesper Juhl <jj@chaosbits.net> Acked-by: Tigran Aivazian <tigran@aivazian.fsnet.co.uk> Cc: Shaohua Li <shaohua.li@intel.com> LKML-Reference: <alpine.LNX.2.00.1012251946100.10759@swampdragon.chaosbits.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Jeff Garzik authored
We don't need or want MSR usage here, on x86-64. x86-64 was disabled intentionally in Kconfig, but commit 9272dcc2 changed that. drivers/ata/pata_cs5536.c:47:1: warning: "rdmsr" redefined In file included from arch/x86/include/asm/irqflags.h:60, from include/linux/irqflags.h:15, from arch/x86/include/asm/system.h:11, from arch/x86/include/asm/processor.h:17, from include/linux/prefetch.h:14, from include/linux/list.h:7, from include/linux/module.h:9, from drivers/ata/pata_cs5536.c:33: arch/x86/include/asm/paravirt.h:146:1: warning: this is the location of the previous definition drivers/ata/pata_cs5536.c:48:1: warning: "wrmsr" redefined arch/x86/include/asm/paravirt.h:154:1: warning: this is the location of the previous definition Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
- 26 Dec, 2010 1 commit
-
-
Len Brown authored
-