- 20 Apr, 2011 30 commits
-
-
Vlad Yasevich authored
SCTP does not SCTP_STATE_EMPTY and we can never be in that state. Remove useless code. Signed-off-by:
Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by:
Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Shan Wei authored
When pos.v <= (void *)chunk + end - ntohs(pos.p->length) and ntohs(pos.p->length) >= sizeof(sctp_paramhdr_t) these two expressions are all true, pos.v <= (void *)chunk + end - sizeof(sctp_paramhdr_t) *must* be true. This patch removes this kind of redundant check. It's same to _sctp_walk_errors macro. Signed-off-by:
Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by:
-
Shan Wei authored
RFC4960, section 3.3.7 said: If an endpoint receives an ABORT with a format error or no TCB is found, it MUST silently discard it. When an endpoint receives ABORT that parameter value is invalid, drop it. Signed-off-by:
-
Shan Wei authored
When an endpoint receives ERROR that parameter value is invalid, send an ABORT to peer with a Protocol Violation error code. Signed-off-by:
-
Michał Mirosław authored
This changes offload setting behaviour to what I think is correct: - offloads set via ethtool mean what admin wants to use (by default he wants 'em all) - offloads set via ioctl() mean what userspace is expecting to get (this limits which admin wishes are granted) - TUN_NOCHECKSUM is ignored, as it might cause broken packets when forwarded (ip_summed == CHECKSUM_UNNECESSARY means that checksum was verified, not that it can be ignored) If TUN_NOCHECKSUM is implemented, it should set skb->csum_* and skb->ip_summed (= CHECKSUM_PARTIAL) for known protocols and let others be verified by kernel when necessary. TUN_NOCHECKSUM handling was introduced by commit f43798c2: tun: Allow GSO using virtio_net_hdr Signed-off-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by:
-
Michał Mirosław authored
Signed-off-by:
Ian Campbell <ian.campbell@citrix.com> Signed-off-by:
-
Michał Mirosław authored
Bit more than minimal conversion. There might be some issues because of qlcnic_set_netdev_features() if it's called after netdev init. Signed-off-by:
-
Michał Mirosław authored
A minimal conversion. ibmveth_set_csum_offload() can be folded into ibmveth_set_features() and adapter->rx_csum removed - left for later cleanup. Signed-off-by:
-
Michał Mirosław authored
This also fixes bug in xmit path, where TX checksum offload state was used instead of skb->ip_summed to decide if the offload was needed. Signed-off-by:
-
Michał Mirosław authored
Signed-off-by:
-
Michał Mirosław authored
options.large_send was easy to get rid of. options.checksum_type has deeper roots so is left for later cleanup. Signed-off-by:
-
Michał Mirosław authored
Signed-off-by:
-
Michał Mirosław authored
Signed-off-by:
-
Michał Mirosław authored
Signed-off-by:
-
Michał Mirosław authored
Remove set_sg from DSA slave ethtool_ops. Features inheritance looks broken/not fully implemented anyway. Signed-off-by:
-
Vlad Yasevich authored
When processing an ACK for ADD_IP parameter, we only release the routes on non-active transports. This can cause a wrong source address to be used. We can release the routes and cause new route lookups and source address selection so that new addresses can be used as source. Additionally, we don't need to lookup routes for all transports at the same time. We can let the transmit code path update the cached route when the transport actually sends something. Signed-off-by:
-
Vlad Yasevich authored
We allow 0 port when adding new addresses. It only makes sence to allow 0 port when removing addresses. When removing the currently bound port will be used when the port in the address is set to 0. Signed-off-by:
-
Vlad Yasevich authored
When we have have to remove a transport due to ASCONF, we move the data to a new active path. This can trigger CACC algorithm to not mark that data as missing when SACKs arrive. This is because the transport passed to the CACC algorithm is the one this data is sitting on, not the one it was sent on (that one may be gone). So, by sending the original transport (even if it's NULL), we may start marking data as missing. Signed-off-by:
-
Shan Wei authored
Use common function to simply code. Signed-off-by:
-
Shan Wei authored
Remove SCTP_CMD_TRANSMIT command as it never be used. Signed-off-by:
-
Shan Wei authored
The 'p' member of struct sctp_paramhdr is common part for IPv4 addr parameter and IPv6 addr parameter in union sctp_addr_param. For addr-related code, use specified addr parameter. Otherwise, use common header to access type/length member. Signed-off-by:
-
Shan Wei authored
Update the comment about sctp_sf_violation_paramlen() to be more precise. Signed-off-by:
-
Shan Wei authored
The macro never be used. And if needed, can use !sctp_chunk_is_data instead of. Signed-off-by:
-
Ajit Khaparde authored
This change will allow the default value of tx rate to be displayed when ip link show is called on a PF interface. Signed-off-by:
Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by:
-
Ajit Khaparde authored
Signed-off-by:
-
Ajit Khaparde authored
eth_get_statistics and vlan_config command have same opcode. Use opcode subsystem id to differentiate one from other. Signed-off-by:
-
Ajit Khaparde authored
Signed-off-by:
-
Ajit Khaparde authored
Signed-off-by:
-
Shan Wei authored
Fix the below compile warning: drivers/net/bna/bfa_ioc.c:1922: warning: ‘bfa_ioc_smem_pgoff’ defined but not used Signed-off-by:
-
Shan Wei authored
Fix the below compile warning: drivers/net/forcedeth.c:4266: warning: ‘nv_set_tso’ defined but not used commit 569e1463 converts forcedeth driver to use hw_features. So, implement function of .set_tso is abandoned. Signed-off-by:
-
- 19 Apr, 2011 10 commits
-
-
-
David S. Miller authored
Conflicts: drivers/net/bnx2x/bnx2x_ethtool.c
-
Michał Mirosław authored
Another simple conversion. Signed-off-by:
-
Michał Mirosław authored
This also removes private feature flags that were always set to true. You may want to move vmxnet3_set_features() to vmxnet3_drv.c as a following cleanup. Signed-off-by:
-
Michał Mirosław authored
Side effect: ->gro_enable is removed as napi_gro_receive() does the fallback itself. Signed-off-by:
-
Michał Mirosław authored
Also remove flags that were not used or are now redundant to hw_features bits. No device had UDP_CSUM_CAPABLE set. Signed-off-by:
-
Michał Mirosław authored
This removes advertising HW_CSUM as driver does not support it. Note: driver advertises TSO6 but not IPV6_CSUM - bug maybe? Signed-off-by:
-
Michał Mirosław authored
Fix build warnings like the following: WARNING: drivers/net/built-in.o(.data+0x12434): Section mismatch in reference from the variable madgemc_driver to the variable .init.data:madgemc_adapter_ids And add some consts to EISA device ID tables along the way. Signed-off-by:
-
Francois Romieu authored
- the MSS value is actually contained in a 11 bits wide (0x7ff) field. The extra bit in the former MSSMask did encompass the TSO command bit ("LargeSend") as well (0xfff). Oops. - the Tx descriptor layout is not the same through the whole chipset family. The 8169 documentation, the 8168c documentation and Realtek's drivers (8.020.00, 1.019.00, 6.014.00) highlight two layouts: 1. 8169, 8168 up to 8168b (included) and 8101 2. {8102e, 8168c} and beyond - notwithstanding the "first descriptor" and "last descriptor" bits, the same Tx descriptor content is enforced when a packet consists of several descriptors. The chipsets are documented to require it. Credits go to David Dillow <dave@thedillows.org> for the original patch. Signed-off-by:Francois Romieu <romieu@fr.zoreil.com> Cc: Realtek <nic_swsd@realtek.com> Signed-off-by:
-
Michał Mirosław authored
Signed-off-by:
Jon Mason <jon.mason@myri.com> Signed-off-by:
-
