Pull scheduler changes from Ingo Molnar:
 "Continued quest to clean up and enhance the cputime code by Frederic
  Weisbecker, in preparation for future tickless kernel features.

  Other than that, smallish changes."

Fix up trivial conflicts due to additions next to each other in arch/{x86/}Kconfig

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  cputime: Make finegrained irqtime accounting generally available
  cputime: Gather time/stats accounting config options into a single menu
  ia64: Reuse system and user vtime accounting functions on task switch
  ia64: Consolidate user vtime accounting
  vtime: Consolidate system/idle context detection
  cputime: Use a proper subsystem naming for vtime related APIs
  sched: cpu_power: enable ARCH_POWER
  sched/nohz: Clean up select_nohz_load_balancer()
  sched: Fix load avg vs. cpu-hotplug
  sched: Remove __ARCH_WANT_INTERRUPTS_ON_CTXSW
  sched: Fix nohz_idle_balance()
  sched: Remove useless code in yield_to()
  sched: Add time unit suffix to sched sysctl knobs
  sched/debug: Limit sd->*_idx range on sysctl
  sched: Remove AFFINE_WAKEUPS feature flag
  s390: Remove leftover account_tick_vtime() header
  cputime: Consolidate vtime handling on context switch
  sched: Move cputime code to its own file
  cputime: Generalize CONFIG_VIRT_CPU_ACCOUNTING
  tile: Remove SD_PREFER_LOCAL leftover
  ...

Pull perf fix from Ingo Molnar:
 "Leftover perf/urgent fix from the v3.6 cycle"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86: Fix typo in uncore_pmu_to_box

Pull perf update from Ingo Molnar:
 "Lots of changes in this cycle as well, with hundreds of commits from
  over 30 contributors.  Most of the activity was on the tooling side.

  Higher level changes:

   - New 'perf kvm' analysis tool, from Xiao Guangrong.

   - New 'perf trace' system-wide tracing tool

   - uprobes fixes + cleanups from Oleg Nesterov.

   - Lots of patches to make perf build on Android out of box, from
     Irina Tirdea

   - Extend ftrace function tracing utility to be more dynamic for its
     users.  It allows for data passing to the callback functions, as
     well as reading regs as if a breakpoint were to trigger at function
     entry.

     The main goal of this patch series was to allow kprobes to use
     ftrace as an optimized probe point when a probe is placed on an
     ftrace nop.  With lots of help from Masami Hiramatsu, and going
     through lots of iterations, we finally came up with a good
     solution.

   - Add cpumask for uncore pmu, use it in 'stat', from Yan, Zheng.

   - Various tracing updates from Steve Rostedt

   - Clean up and improve 'perf sched' performance by elliminating lots
     of needless calls to libtraceevent.

   - Event group parsing support, from Jiri Olsa

   - UI/gtk refactorings and improvements from Namhyung Kim

   - Add support for non-tracepoint events in perf script python, from
     Feng Tang

   - Add --symbols to 'script', similar to the one in 'report', from
     Feng Tang.

  Infrastructure enhancements and fixes:

   - Convert the trace builtins to use the growing evsel/evlist
     tracepoint infrastructure, removing several open coded constructs
     like switch like series of strcmp to dispatch events, etc.
     Basically what had already been showcased in 'perf sched'.

   - Add evsel constructor for tracepoints, that uses libtraceevent just
     to parse the /format events file, use it in a new 'perf test' to
     make sure the libtraceevent format parsing regressions can be more
     readily caught.

   - Some strange errors were happening in some builds, but not on the
     next, reported by several people, problem was some parser related
     files, generated during the build, didn't had proper make deps, fix
     from Eric Sandeen.

   - Introduce struct and cache information about the environment where
     a perf.data file was captured, from Namhyung Kim.

   - Fix handling of unresolved samples when --symbols is used in
     'report', from Feng Tang.

   - Add union member access support to 'probe', from Hyeoncheol Lee.

   - Fixups to die() removal, from Namhyung Kim.

   - Render fixes for the TUI, from Namhyung Kim.

   - Don't enable annotation in non symbolic view, from Namhyung Kim.

   - Fix pipe mode in 'report', from Namhyung Kim.

   - Move related stats code from stat to util/, will be used by the
     'stat' kvm tool, from Xiao Guangrong.

   - Remove die()/exit() calls from several tools.

   - Resolve vdso callchains, from Jiri Olsa

   - Don't pass const char pointers to basename, so that we can
     unconditionally use libgen.h and thus avoid ifdef BIONIC lines,
     from David Ahern

   - Refactor hist formatting so that it can be reused with the GTK
     browser, From Namhyung Kim

   - Fix build for another rbtree.c change, from Adrian Hunter.

   - Make 'perf diff' command work with evsel hists, from Jiri Olsa.

   - Use the only field_sep var that is set up: symbol_conf.field_sep,
     fix from Jiri Olsa.

   - .gitignore compiled python binaries, from Namhyung Kim.

   - Get rid of die() in more libtraceevent places, from Namhyung Kim.

   - Rename libtraceevent 'private' struct member to 'priv' so that it
     works in C++, from Steven Rostedt

   - Remove lots of exit()/die() calls from tools so that the main perf
     exit routine can take place, from David Ahern

   - Fix x86 build on x86-64, from David Ahern.

   - {int,str,rb}list fixes from Suzuki K Poulose

   - perf.data header fixes from Namhyung Kim

   - Allow user to indicate objdump path, needed in cross environments,
     from Maciek Borzecki

   - Fix hardware cache event name generation, fix from Jiri Olsa

   - Add round trip test for sw, hw and cache event names, catching the
     problem Jiri fixed, after Jiri's patch, the test passes
     successfully.

   - Clean target should do clean for lib/traceevent too, fix from David
     Ahern

   - Check the right variable for allocation failure, fix from Namhyung
     Kim

   - Set up evsel->tp_format regardless of evsel->name being set
     already, fix from Namhyung Kim

   - Oprofile fixes from Robert Richter.

   - Remove perf_event_attr needless version inflation, from Jiri Olsa

   - Introduce libtraceevent strerror like error reporting facility,
     from Namhyung Kim

   - Add pmu mappings to perf.data header and use event names from cmd
     line, from Robert Richter

   - Fix include order for bison/flex-generated C files, from Ben
     Hutchings

   - Build fixes and documentation corrections from David Ahern

   - Assorted cleanups from Robert Richter

   - Let O= makes handle relative paths, from Steven Rostedt

   - perf script python fixes, from Feng Tang.

   - Initial bash completion support, from Frederic Weisbecker

   - Allow building without libelf, from Namhyung Kim.

   - Support DWARF CFI based unwind to have callchains when %bp based
     unwinding is not possible, from Jiri Olsa.

   - Symbol resolution fixes, while fixing support PPC64 files with an
     .opt ELF section was the end goal, several fixes for code that
     handles all architectures and cleanups are included, from Cody
     Schafer.

   - Assorted fixes for Documentation and build in 32 bit, from Robert
     Richter

   - Cache the libtraceevent event_format associated to each evsel
     early, so that we avoid relookups, i.e.  calling pevent_find_event
     repeatedly when processing tracepoint events.

     [ This is to reduce the surface contact with libtraceevents and
        make clear what is that the perf tools needs from that lib: so
        far parsing the common and per event fields.  ]

   - Don't stop the build if the audit libraries are not installed, fix
     from Namhyung Kim.

   - Fix bfd.h/libbfd detection with recent binutils, from Markus
     Trippelsdorf.

   - Improve warning message when libunwind devel packages not present,
     from Jiri Olsa"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (282 commits)
  perf trace: Add aliases for some syscalls
  perf probe: Print an enum type variable in "enum variable-name" format when showing accessible variables
  perf tools: Check libaudit availability for perf-trace builtin
  perf hists: Add missing period_* fields when collapsing a hist entry
  perf trace: New tool
  perf evsel: Export the event_format constructor
  perf evsel: Introduce rawptr() method
  perf tools: Use perf_evsel__newtp in the event parser
  perf evsel: The tracepoint constructor should store sys:name
  perf evlist: Introduce set_filter() method
  perf evlist: Renane set_filters method to apply_filters
  perf test: Add test to check we correctly parse and match syscall open parms
  perf evsel: Handle endianity in intval method
  perf evsel: Know if byte swap is needed
  perf tools: Allow handling a NULL cpu_map as meaning "all cpus"
  perf evsel: Improve tracepoint constructor setup
  tools lib traceevent: Fix error path on pevent_parse_event
  perf test: Fix build failure
  trace: Move trace event enable from fs_initcall to core_initcall
  tracing: Add an option for disabling markers
  ...

Pull trivial irq core update from Ingo Molnar:
 "Two symbol exports for modular irq-chip drivers"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Export dummy_irq_chip
  genirq: Export irq_set_chip_and_handler_name()

Pull core locking changes from Ingo Molnar:
 "It includes a lockdep improvement plus a spinlock inlining Kconfig
  cleanup."

* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking: Adjust spin lock inlining Kconfig options
  lockdep: Check if nested lock is actually held

Pull core kernel fixes from Ingo Molnar:
 "This is a complex task_work series from Oleg that fixes the bug that
  this VFS commit tried to fix:

    d35abdb2 hold task_lock around checks in keyctl

  but solves the problem without the lockup regression that d35abdb2
  introduced in v3.6.

  This series came late in v3.6 and I did not feel confident about it so
  late in the cycle.  Might be worth backporting to -stable if it proves
  itself upstream."

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  task_work: Simplify the usage in ptrace_notify() and get_signal_to_deliver()
  task_work: Revert "hold task_lock around checks in keyctl"
  task_work: task_work_add() should not succeed after exit_task_work()
  task_work: Make task_work_add() lockless

Pull RCU changes from Ingo Molnar:

 0. 'idle RCU':

     Adds RCU APIs that allow non-idle tasks to enter RCU idle mode and
     provides x86 code to make use of them, allowing RCU to treat
     user-mode execution as an extended quiescent state when the new
     RCU_USER_QS kernel configuration parameter is specified.  (Work is
     in progress to port this to a few other architectures, but is not
     part of this series.)

 1.  A fix for a latent bug that has been in RCU ever since the addition
     of CPU stall warnings.  This bug results in false-positive stall
     warnings, but thus far only on embedded systems with severely
     cut-down userspace configurations.

 2.  Further reductions in latency spikes for huge systems, along with
     additional boot-time adaptation to the actual hardware.

     This is a large change, as it moves RCU grace-period initialization
     and cleanup, along with quiescent-state forcing, from softirq to a
     kthread.  However, it appears to be in quite good shape (famous
     last words).

 3.  Updates to documentation and rcutorture, the latter category
     including keeping statistics on CPU-hotplug latencies and fixing
     some initialization-time races.

 4.  CPU-hotplug fixes and improvements.

 5.  Idle-loop fixes that were omitted on an earlier submission.

 6.  Miscellaneous fixes and improvements

In certain RCU configurations new kernel threads will show up (rcu_bh,
rcu_sched), showing RCU processing overhead.

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (90 commits)
  rcu: Apply micro-optimization and int/bool fixes to RCU's idle handling
  rcu: Userspace RCU extended QS selftest
  x86: Exit RCU extended QS on notify resume
  x86: Use the new schedule_user API on userspace preemption
  rcu: Exit RCU extended QS on user preemption
  rcu: Exit RCU extended QS on kernel preemption after irq/exception
  x86: Exception hooks for userspace RCU extended QS
  x86: Unspaghettize do_general_protection()
  x86: Syscall hooks for userspace RCU extended QS
  rcu: Switch task's syscall hooks on context switch
  rcu: Ignore userspace extended quiescent state by default
  rcu: Allow rcu_user_enter()/exit() to nest
  rcu: Settle config for userspace extended quiescent state
  rcu: Make RCU_FAST_NO_HZ handle adaptive ticks
  rcu: New rcu_user_enter_after_irq() and rcu_user_exit_after_irq() APIs
  rcu: New rcu_user_enter() and rcu_user_exit() APIs
  ia64: Add missing RCU idle APIs on idle loop
  xtensa: Add missing RCU idle APIs on idle loop
  score: Add missing RCU idle APIs on idle loop
  parisc: Add missing RCU idle APIs on idle loop
  ...

Pull ktest fix from Steven Rostedt:
 "ktest has one fix needed for this merge window - fix parsing of ELSE
  IF in reading config file"

* tag 'ktest-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: Fix ELSE IF statements

Merge tag 'localmodconfig-v3.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-kconfig

Pull localmodconfig fixes from Steven Rostedt:
 "Bill Pemberton added some changes to make streamline-config.pl work
  again as a stand-alone tool (outside of make localmodconfig).

  Also, he added a couple of updates to make the code be more "Perl
  proper".

  Added last minute fix to localyesconfig, that was the same as
  localmodconfig since v3.2, due to a change in the makefiles."

* tag 'localmodconfig-v3.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-kconfig:
  localmodconfig: Fix localyesconfig to set to 'y' not 'm'
  localmodconfig: Use my variable for loop in streamline_config.pl
  localmodconfig: Use 3 parameter open in streamline_config.pl
  localmodconfig: Rework find_config in streamline_config.pl
  localmodconfig: Set default value for ksource in streamline_config.pl

The kbuild target 'localyesconfig' has been same as 'localmodconfig'
since the commit 50bce3e8 "kconfig/streamline_config.pl: merge
local{mod,yes}config". The commit expects this script generates
different configure depending on target, but it was not yet implemented.

So I added code that sets to 'yes' when target is 'localyesconfig'.

Link: http://lkml.kernel.org/r/1349101470-12243-1-git-send-email-yuta.and@gmail.com

Cc: stable@vger.kernel.org # v3.2
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Yuta Ando <yuta.and@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@rostedt.homelinux.com>

Pull HID updates from Jiri Kosina:

 1) Patchset from Henrik Rydberg which substantially reduces irqsoff
    latency for all input devices.  In addition to that, Henrik reworked
    multitouch handling in order to reduce runtime memory consumption.

    This patchset touches code in Input subsystem as well.  All the
    changes have been Acked by Dmitry, and we agreed to do it this way
    due to inter-dependencies between the patchset and subsequent
    changes in HID subsystem.

 2) Rework, clenaups and a lot of fixes to picolcd driver by Bruno
    Prémont.

 3) Core report descriptor handling fix which fixes resume issue on some
    devices, by Kevin Daughtridge

 4) hidraw fixes by Alexey Khoroshilov and Ratan Nalumasu

 5) wiimote driver now supports balance board, by David Herrmann.

 6) Other smaller fixes and new device id additions all over the place.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (79 commits)
  HID: hidraw: don't deallocate memory when it is in use
  HID: picoLCD: optimize for inactive debugfs
  HID: multitouch: add support for GeneralTouch multi-touchscreen
  HID: Add support for Sony PS3 BD Remote Control
  HID: keep dev_rdesc unmodified and use it for comparisons
  HID: lg4ff: Minor coding style fixes in lg4ff and hid-lg
  HID: hid-lg4ff: Set absolute axes parametes on DFP
  HID: hid-lg4ff: Adjust X axis input value accordingly to selected range.
  HID: hid-lg4ff: Minor code cleanup to improve readability
  HID: ntrig: change default value of logical/physical width/height to 1
  HID: picoLCD: bounds check in dump_buff_as_hex()
  Input: bcm5974 - Convert to MT-B
  Input: bcm5974 - Drop the logical dimensions
  Input: bcm5974 - Preparatory renames
  Input: bcm5974 - only setup button urb for TYPE1 devices
  HID: hid-multitouch: Add Flatfrog support
  HID: hid-multitouch: Fix contact count on 3M panels
  HID: hid-multitouch: Remove the redundant touch state
  HID: hid-multitouch: Simplify setup and frame synchronization
  HID: Allow more fields in the hid report
  ...

Pull the trivial tree from Jiri Kosina:
 "Tiny usual fixes all over the place"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits)
  doc: fix old config name of kprobetrace
  fs/fs-writeback.c: cleanup riteback_sb_inodes kerneldoc
  btrfs: fix the commment for the action flags in delayed-ref.h
  btrfs: fix trivial typo for the comment of BTRFS_FREE_INO_OBJECTID
  vfs: fix kerneldoc for generic_fh_to_parent()
  treewide: fix comment/printk/variable typos
  ipr: fix small coding style issues
  doc: fix broken utf8 encoding
  nfs: comment fix
  platform/x86: fix asus_laptop.wled_type module parameter
  mfd: printk/comment fixes
  doc: getdelays.c: remember to close() socket on error in create_nl_socket()
  doc: aliasing-test: close fd on write error
  mmc: fix comment typos
  dma: fix comments
  spi: fix comment/printk typos in spi
  Coccinelle: fix typo in memdup_user.cocci
  tmiofb: missing NULL pointer checks
  tools: perf: Fix typo in tools/perf
  tools/testing: fix comment / output typos
  ...

Pull regulator updates from Mark Brown:
 - Support for putting regulators into bypass mode where they simply
   switch their input to the output (mainly used for low power
   retention).
 - A new API for setting voltages based on a voltage plus tolerance
   rather than an explicit voltage range.
 - Lots of cleanups and API updates from Axel Lin.
 - New driver for MAX8907.

* tag 'regulator-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (71 commits)
  regulator: arizona-ldo: Remove top voltage
  regulator: tps6586x: remove regulator-compatible from DT docs
  regulator: tps65217.txt: remove regulator-compatible from DT docs
  regulator: deprecate regulator-compatible DT property
  regulator: fan53555: remove vsel_max not used
  regulator: aat2870: Don't explicitly initialise the first field
  extcon: arizona: Use bypass mode for MICVDD
  regulator: wm831x-ldo: Add bypass support
  regulator: arizona-micsupp: Support get/set bypass
  regulator: arizona-ldo: Support get/set bypass
  regulator: core: Provide regmap get/set bypass operations
  regulator: core: Support bypass mode
  regulator: Fairchild fan53555 support
  regulator: twl: Remove another unused variable warning
  regulator: core: Try using the parent device for the default regmap
  regulator: core: Fast path non-deferred disables
  regulator: core: Report microvolts in sysfs even with only list_voltage()
  regulator: tps6586x: add support for SYS rail
  regulator: lp872x: remove unnecessary function
  regulator: lp872x: fix NULL pointer access problem
  ...

Pull regmap updates from Mark Brown:
 "A quiet release for the regmap core, essentially all the activity is
  in the shared interrupt controller which is being more and more widely
  used and has been enhanced to support a wider range of masking types
  and wake handling methods, plus integration with runtime PM for
  devices making aggressive use of that."

* tag 'regmap-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: no need primary handler for nested irq
  regmap: irq: Add mask invert flag for enable register
  mfd: wm8994: Flag the interrupt block as requiring runtime PM be enabled
  regmap: irq: Enable devices for runtime PM while handling interrupts
  regmap: irq: initialize all irqs to wake disabled
  regmap: set MASK_ON_SUSPEND/SKIP_SET_WAKE if no wake_base
  regmap: name irq_chip based on regmap_irq_chip's name
  regmap: store irq_chip inside regmap_irq_chip_data
  regmap: irq: Only update mask bits when doing initial mask
  regmap: fix some error messages to take account of irq_reg_stride
  regmap: Don't lock in regmap_reinit_cache()

Pull GFS2 updates from Steven Whitehouse:
 "The major feature this time is the "rbm" conversion in the resource
  group code.  The new struct gfs2_rbm specifies the location of an
  allocatable block in (resource group, bitmap, offset) form.  There are
  a number of added helper functions, and later patches then rewrite
  some of the resource group code in terms of this new structure.  Not
  only does this give us a nice code clean up, but it also removes some
  of the previous restrictions where extents could not cross bitmap
  boundaries, for example.

  In addition to that, there are a few bug fixes and clean ups, but the
  rbm work is by far the majority of this patch set in terms of number
  of changed lines."

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw: (27 commits)
  GFS2: Write out dirty inode metadata in delayed deletes
  GFS2: fix s_writers.counter imbalance in gfs2_ail_empty_gl
  GFS2: Fix infinite loop in rbm_find
  GFS2: Consolidate free block searching functions
  GFS2: Get rid of I_MUTEX_QUOTA usage
  GFS2: Stop block extents at the end of bitmaps
  GFS2: Fix unclaimed_blocks() wrapping bug and clean up
  GFS2: Improve block reservation tracing
  GFS2: Fall back to ignoring reservations, if there are no other blocks left
  GFS2: Fix ->show_options() for statfs slow
  GFS2: Use rbm for gfs2_setbit()
  GFS2: Use rbm for gfs2_testbit()
  GFS2: Eliminate unnecessary check for state > 3 in bitfit
  GFS2: Eliminate redundant calls to may_grant
  GFS2: Combine functions gfs2_glock_dq_wait and wait_on_demote
  GFS2: Combine functions gfs2_glock_wait and wait_on_holder
  GFS2: inline __gfs2_glock_schedule_for_reclaim
  GFS2: change function gfs2_direct_IO to use a normal gfs2_glock_dq
  GFS2: rbm code cleanup
  GFS2: Fix case where reservation finished at end of rgrp
  ...

Conflicts:
	drivers/hid/hid-multitouch.c

Conflicts:
	drivers/hid/usbhid/hid-quirks.c

Merge branches 'from-henrik', 'hidraw', 'logitech', 'picolcd', 'ps3', 'uclogic', 'wacom' and 'wiimote' into for-linus

When a device is unplugged, wait for all processes that have opened the device
to close before deallocating the device.
Signed-off-by: Ratan Nalumasu <ratan@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Matthieu CASTET adjusted picolcd_debug_out_report() to only operate when
there is an active listener on debugfs for events.

His change got lost while splitting hid_picolcd.c, restore it.
Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Fix the touch-up no response problem on GeneralTouch twofingers touchscreen and
modify the driver for new GeneralTouch PWT touchscreen.
Signed-off-by: Xianhan Yu <aroundight77@gmail.com>
Reviewed-by Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The Sony PS3 Blue-ray Disc Remote Control used to be supported by the
BlueZ project's user space, but the code that handled it was recently
removed as its functionality conflicted with a real HSP implementation
and the mapping was thought to be better handled in the kernel. This is
a port of the mapping logic from the fakehid driver by Marcel Holtmann
to the in-kernel HID layer.

We also add support for the Logitech Harmony Adapter for PS3, which
emulates the BD Remote.
Signed-off-by: David Dillow <dave@thedillows.org>
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The dev_rdesc member of the hid_device structure is meant to store the original
report descriptor received from the device, but it is currently passed to any
report_fixup method before it is copied to the rdesc member. This patch uses a
temporary buffer to shield dev_rdesc from the side effects of many HID drivers'
report_fixup implementations.

usbhid's hid_post_reset checks the report descriptor currently returned by the
device against a descriptor that may have been modified by a driver's
report_fixup method. That leaves some devices nonfunctional after a resume, with
a "reset_resume error 1" reported. This patch checks the new descriptor against
the unmodified dev_rdesc instead and uses the original, instead of modified,
report size.

BugLink: http://bugs.launchpad.net/bugs/1049623Signed-off-by: Kevin Daughtridge <kevin@kdau.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

IBM reported a deadlock in select_parent().  This was found to be caused
by taking rename_lock when already locked when restarting the tree
traversal.

There are two cases when the traversal needs to be restarted:

 1) concurrent d_move(); this can only happen when not already locked,
    since taking rename_lock protects against concurrent d_move().

 2) racing with final d_put() on child just at the moment of ascending
    to parent; rename_lock doesn't protect against this rare race, so it
    can happen when already locked.

Because of case 2, we need to be able to handle restarting the traversal
when rename_lock is already held.  This patch fixes all three callers of
try_to_ascend().

IBM reported that the deadlock is gone with this patch.

[ I rewrote the patch to be smaller and just do the "goto again" if the
  lock was already held, but credit goes to Miklos for the real work.
   - Linus ]
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull IOMMU fixes from Joerg Roedel:
 "Two small patches:

	* One patch to fix the function declarations for
	  !CONFIG_IOMMU_API. This is causing build errors
	  in linux-next and should be fixed for v3.6.

	* Another patch to fix an IOMMU group related NULL pointer
	  dereference."

* tag 'iommu-fixes-v3.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/amd: Fix wrong assumption in iommu-group specific code
  iommu: static inline iommu group stub functions

Pull NVMe driver fixes from Matthew Wilcox:
 "Now that actual hardware has been released (don't have any yet
  myself), people are starting to want some of these fixes merged."

Willy doesn't have hardware? Guys...

* git://git.infradead.org/users/willy/linux-nvme:
  NVMe: Cancel outstanding IOs on queue deletion
  NVMe: Free admin queue memory on initialisation failure
  NVMe: Use ida for nvme device instance
  NVMe: Fix whitespace damage in nvme_init
  NVMe: handle allocation failure in nvme_map_user_pages()
  NVMe: Fix uninitialized iod compiler warning
  NVMe: Do not set IO queue depth beyond device max
  NVMe: Set block queue max sectors
  NVMe: use namespace id for nvme_get_features
  NVMe: replace nvme_ns with nvme_dev for user admin
  NVMe: Fix nvme module init when nvme_major is set
  NVMe: Set request queue logical block size

Sasha Levin has been running trinity in a KVM tools guest, and was able
to trigger the BUG_ON() at arch/x86/mm/pat.c:279 (verifying the range of
the memory type).  The call trace showed that it was mtdchar_mmap() that
created an invalid remap_pfn_range().

The problem is that mtdchar_mmap() does various really odd and subtle
things with the vma page offset etc, and uses the wrong types (and the
wrong overflow) detection for it.

For example, the page offset may well be 32-bit on a 32-bit
architecture, but after shifting it up by PAGE_SHIFT, we need to use a
potentially 64-bit resource_size_t to correctly hold the full value.

Also, we need to check that the vma length plus offset doesn't overflow
before we check that it is smaller than the length of the mtdmap region.

This fixes things up and tries to make the code a bit easier to read.
Reported-and-tested-by: Sasha Levin <levinsasha928@gmail.com>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Acked-by: Artem Bityutskiy <dedekind1@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull networking fixes from David S Miller:

 1) Netfilter xt_limit module can use uninitialized rules, from Jan
    Engelhardt.

 2) Wei Yongjun has found several more spots where error pointers were
    treated as NULL/non-NULL and vice versa.

 3) bnx2x was converted to pci_io{,un}map() but one remaining plain
    iounmap() got missed.  From Neil Horman.

 4) Due to a fence-post type error in initialization of inetpeer entries
    (which is where we store the ICMP rate limiting information), we can
    erroneously drop ICMPs if the inetpeer was created right around when
    jiffies wraps.

    Fix from Nicolas Dichtel.

 5) smsc75xx resume fix from Steve Glendinnig.

 6) LAN87xx smsc chips need an explicit hardware init, from Marek Vasut.

 7) qlcnic uses msleep() with locks held, fix from Narendra K.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  netdev: octeon: fix return value check in octeon_mgmt_init_phy()
  inetpeer: fix token initialization
  qlcnic: Fix scheduling while atomic bug
  bnx2: Clean up remaining iounmap
  net: phy: smsc: Implement PHY config_init for LAN87xx
  smsc75xx: fix resume after device reset
  netdev: pasemi: fix return value check in pasemi_mac_phy_init()
  team: fix return value check
  l2tp: fix return value check
  netfilter: xt_limit: have r->cost != 0 case work

Pull vfs fixes from Al Viro:
 "A couple of fixes; one for automount/lazy umount race, another a
  classic "we don't protect the refcount transition to zero with the
  lock that protects looking for object in hash" kind of crap in lockd."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  close the race in nlmsvc_free_block()
  do_add_mount()/umount -l races

Pull UML fixes from Richard Weinberger.

* 'for-linus-3.6-rc-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: Preinclude include/linux/kern_levels.h
  um: Fix IPC on um
  um: kill thread->forking
  um: let signal_delivered() do SIGTRAP on singlestepping into handler
  um: don't leak floating point state and segment registers on execve()
  um: take cleaning singlestep to start_thread()

Pull dm fixes from Alasdair G Kergon:
 "A few fixes for problems discovered during the 3.6 cycle.

  Of particular note, are fixes to the thin target's discard support,
  which I hope is finally working correctly; and fixes for multipath
  ioctls and device limits when there are no paths."

* tag 'dm-3.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm:
  dm verity: fix overflow check
  dm thin: fix discard support for data devices
  dm thin: tidy discard support
  dm: retain table limits when swapping to new table with no devices
  dm table: clear add_random unless all devices have it set
  dm: handle requests beyond end of device instead of using BUG_ON
  dm mpath: only retry ioctl when no paths if queue_if_no_path set
  dm thin: do not set discard_zeroes_data

Speculative cache pagecache lookups can elevate the refcount from
under us, so avoid the false positive. If the refcount is < 2 we'll be
notified by a VM_BUG_ON in put_page_testzero as there are two
put_page(src_page) in a row before returning from this function.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Petr Holasek <pholasek@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The new IOMMU groups code in the AMD IOMMU driver makes the
assumption that there is a pci_dev struct available for all
device-ids listed in the IVRS ACPI table. Unfortunatly this
assumption is not true and so this code causes a NULL
pointer dereference at boot on some systems.

Fix it by making sure the given pointer is never NULL when
passed to the group specific code. The real fix is larger
and will be queued for v3.7.
Reported-by: Florian Dazinger <florian@dazinger.net>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

Merge remote-tracking branches 'regulator/topic/core', 'regulator/topic/bypass', 'regulator/topic/tol', 'regulator/topic/drivers' and 'regulator/topic/tps6586x' into regulator-next

The highest voltage step is not supported.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

 * Improve listing of accessible enum perf probe variables, from Hyeoncheol Lee.

 * Don't stop the build if the audit libraries are not installed, fix from Namhyung Kim.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

In case of error, the function of_phy_connect() returns NULL
pointer not ERR_PTR(). The IS_ERR() test in the return value
check should be replaced with NULL test.

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull drm fixes from Dave Airlie:
 "The three nouveau fixes quiten unneeded dmesg spam that people are
   seeing and pondering,

  The udl fix stops it from trying to driver monitors that are too big,
  where we get a black screen.

  And a vmware memory alloc problem."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/nvc0/fifo: ignore bits in PFIFO_INTR that aren't set in PFIFO_INTR_EN
  drm/udl: limit modes to the sku pixel limits.
  vmwgfx: corruption in vmw_event_fence_action_create()
  drm/nvc0/ltcg: mask off intr 0x10
  drm/nouveau: silence a debug message triggered by newer userspace

Pull USB fixes from Greg Kroah-Hartman:
 "Here are two USB bugfixes for your 3.6-rc7 tree.

  The OHCI fix has been reported a number of times and is a regression
  from 3.5, and the patch that causes the regression was on the way to
  the -stable trees before I was reminded (again) that this fix needed
  to get to your tree soon.

  The host controller bugfix was reported in older kernels as being
  pretty easy to trigger, and has been tested by Red Hat and their
  customers.

  Both have been in the usb-next branch in the -next tree for a while
  now, I just cherry-picked them out to get to you in time for the 3.6
  release.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'usb-3.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: Fix race condition when removing host controllers
  USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irq