- 28 Nov, 2015 5 commits
-
-
Wang Nan authored
Following patches are going to introduce BPF object level configuration to enable setting values into BPF maps. To avoid confusion, this patch renames existing 'config' in bpf-loader.c to 'program config'. Following patches would introduce 'object config'. Signed-off-by:
Wang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1448614067-197576-4-git-send-email-wangnan0@huawei.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Wang Nan authored
This patch collects name of maps in BPF object files and saves them into 'maps' field in 'struct bpf_object'. 'bpf_object__get_map_by_name' is introduced to retrive fd and definitions of a map through its name. Signed-off-by:
He Kuang <hekuang@huawei.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: He Kuang <hekuang@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1448614067-197576-3-git-send-email-wangnan0@huawei.comSigned-off-by:
-
Wang Nan authored
This patch collects more information from maps sections in BPF object files into 'struct bpf_object', enables later patches access those information (such as the type and size of the map). In this patch, a new handler 'struct bpf_map' is extracted in parallel with bpf_object and bpf_program. Its iterator and accessor is also created. Signed-off-by:
-
Namhyung Kim authored
When perf report on TUI was called with -S symbol filter, it should update nr entries even if min_pcnt is 0. IIRC the reason was to update nr entries after applying minimum percent threshold. But if symbol filter was given on command line (with -S option), it should use hists->nr_non_filtered_entries instead of hists->nr_entries. So this patch fixes a bug of navigating hists browser that the cursor goes beyond the number of entries when -S (or similar) option is used. Signed-off-by:
Namhyung Kim <namhyung@kernel.org> Tested-by:
-
Namhyung Kim authored
If user gives a filter, perf marks the corresponding column elided and omits the output. But it should process and aggregates samples using the field, otherwise samples will be aggregated as if the column was not there resulted in incorrect output. For example, I'd like to set a filter on native_write_msr_safe. The original overhead of the function is negligible. $ perf report | grep native_write_msr_safe 0.00% swapper [kernel.vmlinux] native_write_msr_safe 0.00% perf [kernel.vmlinux] native_write_msr_safe However adding -S option gives different output. $ perf report -S native_write_msr_safe --percentage absolute | \ > grep -e swapper -e perf 51.47% swapper [kernel.vmlinux] 4.14% perf [kernel.vmlinux] Since it aggregated samples using comm and dso only. In fact, the above values are same when it sorts with -s comm,dso. $ perf report -s comm,dso | grep -e swapper -e perf 51.47% swapper [kernel.vmlinux] 4.14% perf [kernel.vmlinux] This resulted in TUI failure with -ERANGE since it tries to increase sample hit count for annotation with wrong symbols due to incorrect aggregation. This patch fixes it not to skip elided fields when comparing samples in order to insert them to the hists. Commiter note: After the patch, with a different workloads: # perf report --show-total-period -S native_write_msr_safe --stdio # # symbol: native_write_msr_safe # # Samples: 455 of event 'cycles:pp' # Event count (approx.): 134787489 # # Overhead Period Command Shared Object # ........ ...... ............... ................ # 0.22% 293081 qemu-system-x86 [vmlinux] 0.19% 255914 swapper [vmlinux] 0.00% 2054 Timer [vmlinux] 0.00% 1021 firefox [vmlinux] 0.00% 2 perf [vmlinux] # perf report --show-total-period | grep native_write_msr_safe Failed to open /tmp/perf-14838.map, continuing without symbols 0.22% 293081 qemu-system-x86 [vmlinux] [k] native_write_msr_safe 0.19% 255914 swapper [vmlinux] [k] native_write_msr_safe 0.00% 2054 Timer [vmlinux] [k] native_write_msr_safe 0.00% 1021 firefox [vmlinux] [k] native_write_msr_safe 0.00% 2 perf [vmlinux] [k] native_write_msr_safe # Reported-by:Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
- 27 Nov, 2015 6 commits
-
-
Namhyung Kim authored
Currently when perf fails to process samples for some reason, it doesn't show any message about the failure. This is very inconvenient for users especially on TUI as screen is reset after the failure. Reported-by:
-
Arnaldo Carvalho de Melo authored
When a43eec30 ("bpf: introduce bpf_perf_event_output() helper") added PERF_COUNT_SW_BPF_OUTPUT we ended up with a new entry in the event_symbols_sw array that wasn't initialized, thus set to NULL, fix print_symbol_events() to check for that case so that we don't crash if this happens again. (gdb) bt #0 __match_glob (ignore_space=false, pat=<optimized out>, str=<optimized out>) at util/string.c:198 #1 strglobmatch (str=<optimized out>, pat=pat@entry=0x7fffffffe61d "stall") at util/string.c:252 #2 0x00000000004993a5 in print_symbol_events (type=1, syms=0x872880 <event_symbols_sw+160>, max=11, name_only=false, event_glob=0x7fffffffe61d "stall") at util/parse-events.c:1615 #3 print_events (event_glob=event_glob@entry=0x7fffffffe61d "stall", name_only=false) at util/parse-events.c:1675 #4 0x000000000042c79e in cmd_list (argc=1, argv=0x7fffffffe390, prefix=<optimized out>) at builtin-list.c:68 #5 0x00000000004788a5 in run_builtin (p=p@entry=0x871758 <commands+120>, argc=argc@entry=2, argv=argv@entry=0x7fffffffe390) at perf.c:370 #6 0x0000000000420ab0 in handle_internal_command (argv=0x7fffffffe390, argc=2) at perf.c:429 #7 run_argv (argv=0x7fffffffe110, argcp=0x7fffffffe11c) at perf.c:473 #8 main (argc=2, argv=0x7fffffffe390) at perf.c:588 (gdb) p event_symbols_sw[PERF_COUNT_SW_BPF_OUTPUT] $4 = {symbol = 0x0, alias = 0x0} (gdb) A patch to robustify perf to not segfault when the next counter gets added in the kernel will follow this one. Reported-by:
-
Arnaldo Carvalho de Melo authored
When PERF_COUNT_SW_BPF_OUTPUT was added to the kernel we should've added it to tools/perf, where it is used just to list events. This ended up causing a segfault in commands like "perf list stall". Fix it by adding that new software counter. A patch to robustify perf to not segfault when the next counter gets added in the kernel will follow this one. Reported-by:
-
Jiri Olsa authored
The 'perf test unwind' is failing because it forgot to create the kernel maps, fix it. After the patch: # perf test unwind 40: Test dwarf unwind : Ok Reported-and-Tested-by:
Jiri Olsa <jolsa@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20151127082121.GA24503@krava.brq.redhat.comSigned-off-by:
-
Michael Petlan authored
The --kernel option of perf buildid-list tool should show the running kernel buildid. The functionality has been lost during other changes of the related code. The build_id__sprintf() function should return length of the build-id string, but it was the length of the build-id raw data instead. Due to that, some return value checking caused that the final string was not printed out. With this patch the build_id__sprintf() returns the correct value, so the --kernel option works again. Before: # perf buildid-list --kernel # After: # perf buildid-list --kernel 972c1edab5bdc06cc224af45d510af662a3c6972 # Signed-off-by:
Michael Petlan <mpetlan@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> LPU-Reference: 1448632089.24573.114.camel@redhat.com Signed-off-by:
-
Ingo Molnar authored
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: User visible changes: - Add 'vmlinux.debug' to the vmlinux search path (Ekaterina Tumanova) - Do not show sample_(type|period) in the perf_event_attr dump when using -v with 'perf stat' (Jiri Olsa) - Display the WEIGHT sample bit, when set, in 'perf evlist -v' (Jiri Olsa) - Honour --hide-unresolved in 'report', will honour it as well in 'top' when --hide-unresolved gets supported in that tool (Namhyung Kim) - Fix freeze wit h--call-graph 'flat/folded' due to not properly reinitializing the callchain rb_tree (Namhyumg Kim) - Set dso->long_name when a module name is passed as a parameter to tools like 'perf probe' but the 'struct dso' associated to that module still doesn't have the full path for the module, just the '[name]' one obtained from /proc/modules (Wang Nan) - Fix anon_hugepage mmaps detection using scanf on /proc/PID/smaps (Yannick Brosseau) Infrastructure changes: - Add helper function for updating bpf maps elements (He Kuang) - Fix traceevents plugins build race (Jiri Olsa) - Add the $OUTPUT path prefix with 'fixdep' (Jiri Olsa) Signed-off-by:
-
- 26 Nov, 2015 14 commits
-
-
He Kuang authored
Add bpf_map_update_elem() helper function which calls the sys_bpf syscall to update elements in bpf maps. Upcoming patches will use it to adjust data in map through the perf command line. Signed-off-by:
-
Jiri Olsa authored
Adding WIEGHT bit_name call to display sample_type properly. $ perf evlist -v cpu/mem-loads/pp: ...SNIP... sample_type: IP|TID|TIME|ADDR|ID|CPU|DATA_SRC|WEIGHT ... Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Tested-by:
-
Jiri Olsa authored
Clear sample_(type|period) for counting, as it only confuses debug output with unwanted sampling details: Before: $ sudo perf stat -e 'raw_syscalls:sys_enter' -vv ls ------------------------------------------------------------ perf_event_attr: type 2 size 112 config 0x11 { sample_period, sample_freq } 1 sample_type TIME|CPU|PERIOD|RAW read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING disabled 1 inherit 1 enable_on_exec 1 exclude_guest 1 ... After: $ sudo perf stat -e 'raw_syscalls:sys_enter' -vv ls ------------------------------------------------------------ perf_event_attr: type 2 size 112 config 0x11 read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING disabled 1 inherit 1 enable_on_exec 1 exclude_guest 1 ... Signed-off-by: -
Ekaterina Tumanova authored
Currently when debuginfo is separated to vmlinux.debug, it's contents get ignored. Let's change that and add it to the vmlinux_path list. Signed-off-by:
Ekaterina Tumanova <tumanova@linux.vnet.ibm.com> Acked-by:
Alexander Yarygin <yarygin@linux.vnet.ibm.com> Acked-by:
-
Ekaterina Tumanova authored
Refactor vmlinux_path__init() to ease subsequent additions of new vmlinux locations. Signed-off-by:
-
Jiri Olsa authored
Adding OUTPUT path prefix for fixdep target so we use it properly in out of tree builds. If the fixdep already existed in the tree, the out of tree build would see it already exist and did not build the out of tree version, as reported by Arnaldo: [acme@zoo linux]$ make O=/tmp/build/perf -C tools/perf make: Entering directory '/home/git/linux/tools/perf' BUILD: Doing 'make -j4' parallel build make[2]: Nothing to be done for 'fixdep'. make: Leaving directory '/home/git/linux/tools/perf' Reported-and-Tested-by: -
Jiri Olsa authored
Passing perf_script struct into process_event function, so we could process configuration data for event printing. It will be used in following patch to get event name string width. Signed-off-by:
-
Yannick Brosseau authored
When parsing /proc/xxx/maps, the sscanf in perf_event__synthesize_mmap_events truncate the map name at the space in "/anon_hugepage (deleted)". is_anon_memory() then only receives the string "/anon_hugepage" and does not detect it. We change is_anon_memory() to only compare the first part of the string, effectively ignoring if " (deleted)" is there. Signed-off-by:
Yannick Brosseau <scientist@fb.com> Tested-by:
-
Wang Nan authored
Something unexpected may happen if copy statically linked perf to a production environment: # ./perf probe -m ./mymodule.ko my_func [mymodule] with build id 326ab42550ef3d24944f53c817533728367effeb not found, continuing without symbols Failed to find symbol my_func in /home/wangnan/kmodule/mymodule.ko Error: Failed to add events. # ./perf buildid-cache -a ./mymodule.ko # ./perf probe -m ./mymodule.ko my_func Added new event: probe:my_func (on my_func in /home/wangnan/kmodule/mymodule.ko) You can now use it in all perf tools, such as: perf record -e probe:my_func -aR sleep 1 Where: # ldd ./perf not a dynamic executable # strace -e open ./perf probe -m ./mymodule.ko my_func ... open("/home/wangnan/kmodule/mymodule.ko", O_RDONLY) = 3 open("/home/wangnan/kmodule/../lib64/elfutils/libebl_x86_64.so", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory) ... open("/lib64/tls/libebl_x86_64.so", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory) open("/lib64/libebl_x86_64.so", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory) open("/usr/lib64/tls/libebl_x86_64.so", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory) open("/usr/lib64/libebl_x86_64.so", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory) open("[mymodule]", O_RDONLY) = -1 ENOENT (No such file or directory) open("/home/wangnan/.debug/.build-id/32/6ab42550ef3d24944f53c817533728367effeb", O_RDONLY) = -1 ENOENT (No such file or directory) open("[mymodule]", O_RDONLY) = -1 ENOENT (No such file or directory) In the above example, probe fails before we put the module into buildid-cache. However, user would expect it success in both case because perf is able to find probe points actually. The reason is because perf won't utilize module's full path if it failed to open debuginfo. In: convert_to_probe_trace_events -> find_probe_trace_events_from_map -> get_target_map -> kernel_get_module_map -> machine__findnew_module_map -> map_groups__find_by_name map_groups__find_by_name() is able to find the map of that module, but this information is found from /proc/module before it knows the real path of the offline module. Therefore, the map->dso->long_name is set to something like '[mymodule]', which prevent dso__load() find the real path of the module file. In another aspect, if dso__load() can get the offline module through buildid cache, it can read symble table from that ko. Even if debuginfo is not available, 'perf probe' can success if the '.symtab' can be found. This patch improves machine__findnew_module_map(): when dso->long_name is leading with '[' (doesn't find path of module when parsing /proc/modules), fixes it by dso__set_long_name(), so following dso__load() is possible to find the symbol table. This patch won't interfere with buildid matching. Here is the test result: # ./perf probe -m ./mymodule.ko my_func Added new event: probe:my_func (on my_func in /home/wangnan/kmodule/mymodule.ko) You can now use it in all perf tools, such as: perf record -e probe:my_func -aR sleep 1 # ./perf probe -d '*' Removed event: probe:my_func # mv ./mymodule.{ko,.bak} # mv ./moduleb.ko mymodule.ko # ./perf probe -m ./mymodule.ko my_func /home/wangnan/kmodule/mymodule.ko with build id 326ab42550ef3d24944f53c817533728367effeb not found, continuing without symbols Failed to find symbol my_func in /home/wangnan/kmodule/mymodule.ko Error: Failed to add events. # ./perf probe -v -m ./mymodule.ko my_func probe-definition(0): my_func symbol:my_func file:(null) line:0 offset:0 return:0 lazy:(null) 0 arguments Could not open debuginfo. Try to use symbols. symsrc__init: build id mismatch for /home/wangnan/kmodule/mymodule.ko. /home/wangnan/kmodule/mymodule.ko with build id 326ab42550ef3d24944f53c817533728367effeb not found, continuing without symbols Failed to find symbol my_func in /home/wangnan/kmodule/mymodule.ko Error: Failed to add events. Reason: No such file or directory (Code: -2) Signed-off-by: -
Jiri Olsa authored
Ingo reported following build failure: $ make clean install ... CC plugin_kmem.o fixdep: error opening depfile: ./.plugin_hrtimer.o.d: No such file or directory /home/mingo/tip/tools/build/Makefile.build:77: recipe for target 'plugin_hrtimer.o' failed make[3]: *** [plugin_hrtimer.o] Error 2 Makefile:189: recipe for target 'plugin_hrtimer-in.o' failed make[2]: *** [plugin_hrtimer-in.o] Error 2 Makefile.perf:414: recipe for target 'libtraceevent_plugins' failed make[1]: *** [libtraceevent_plugins] Error 2 make[1]: *** Waiting for unfinished jobs.... Currently we have the install-traceevent-plugins target being dependent on $(LIBTRACEEVENT), which will actualy not build any plugin. So the install-traceevent-plugins target itself will try to build plugins, but.. Plugins built is also triggered by perf build itself via libtraceevent_plugins target. This might cause a race having one make thread removing temp files from another and result in above error. Fixing this by having proper plugins build dependency before installing plugins. Reported-and-Tested-by: -
Jiri Olsa authored
The default script handler (the one that displays samples on screen) is implemented scripting_ops instance with process_event callback. This way we can't pass any script config into display function, because we don't want perl or python handlers to be depended on perf script internals. Removing the default_scripting_ops and calling process event function directly. This way it's possible to pass perf_script struct and process configuration data in following commit. Signed-off-by:
David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1448546125-29245-1-git-send-email-jolsa@kernel.orgSigned-off-by:
-
Namhyung Kim authored
The callchain rbtree is rebuilt periodically, so it needs to reinitialize the root everytime. Otherwise it can be stuck in the rbtree insertion with stale pointers. Signed-off-by:
-
Namhyung Kim authored
If user requested to hide unresolved entries, skip unresolved callchains as well as hist entries. Signed-off-by:
-
Ingo Molnar authored
Merge tag 'perf-core-for-mingo-2' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: User visible changes: - Fix to free temporal Dwarf_Frame correctly in 'perf probe', fixing a regression introduced in perf/core that prevented, at least, adding an uprobe collecting function parameter values (Masami Hiramatsu) - Fix output of %llu for 64 bit values read on 32 bit machines in libtraceevent (Steven Rostedt) Developer visible: - Clean CFLAGS and LDFLAGS for fixdep in tools/build (Wang Nan) - Don't do a feature check when cleaning tools/lib/bpf (Wang Nan) Signed-off-by:
-
- 25 Nov, 2015 3 commits
-
-
Wang Nan authored
Before this patch libbpf always do feature check even when cleaning. For example: $ cd kernel/tools/lib/bpf $ make Auto-detecting system features: ... libelf: [ on ] ... bpf: [ on ] CC libbpf.o CC bpf.o LD libbpf-in.o LINK libbpf.a LINK libbpf.so $ make clean CLEAN libbpf CLEAN core-gen $ make clean Auto-detecting system features: ... libelf: [ on ] ... bpf: [ on ] CLEAN libbpf CLEAN core-gen $ Although the first 'make clean' doesn't show feature check result, it still does the check. No output because check result is similar to FEATURE-DUMP.libbpf. This patch uses same method as perf to turn off feature checking when 'make clean'. Reported-and-Tested-by: -
Wang Nan authored
Sometimes passing variables to tools/build is dangerous. For example, on my platform there is a gcc problem (gcc 4.8.1): It passes the stackprotector-all feature check: $ gcc -fstack-protector-all -c ./test.c $ echo $? 0 But requires LDFLAGS support if separate compiling and linking: $ gcc -fstack-protector-all -c ./test.c $ gcc ./test.o ./test.o: In function `main': test.c:(.text+0xb): undefined reference to `__stack_chk_guard' test.c:(.text+0x21): undefined reference to `__stack_chk_guard' collect2: error: ld returned 1 exit status $ gcc -fstack-protector-all ./test.o $ echo $? 0 $ gcc ./test.o -lssp $ echo $? 0 $ In this environment building perf throws an error: $ make BUILD: Doing 'make -j24' parallel build config/Makefile:344: No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR config/Makefile:403: No libaudit.h found, disables 'trace' tool, please install audit-libs-devel or libaudit-dev config/Makefile:418: slang not found, disables TUI support. Please install slang-devel or libslang-dev config/Makefile:432: GTK2 not found, disables GTK2 support. Please install gtk2-devel or libgtk2.0-dev config/Makefile:564: No bfd.h/libbfd found, please install binutils-dev[el]/zlib-static/libiberty-dev to gain symbol demangling config/Makefile:606: No numa.h found, disables 'perf bench numa mem' benchmark, please install numactl-devel/libnuma-devel/libnuma-dev CC fixdep.o LD fixdep-in.o LINK fixdep fixdep-in.o: In function `parse_dep_file': /kernel/tools/build/fixdep.c:47: undefined reference to `__stack_chk_guard' /kernel/tools/build/fixdep.c:117: undefined reference to `__stack_chk_guard' fixdep-in.o: In function `main': /kernel-hydrogen/tools/build/fixdep.c:156: undefined reference to `__stack_chk_guard' /kernel/tools/build/fixdep.c:168: undefined reference to `__stack_chk_guard' collect2: error: ld returned 1 exit status make[2]: *** [fixdep] Error 1 make[1]: *** [fixdep] Error 2 make: *** [all] Error 2 This is because the CFLAGS used in building perf pollutes the CFLAGS used for fixdep, passing -fstack-protector-all to buiold fixdep which is obviously not required. Since fixdep is a small host side tool, we should keep its CFLAGS/LDFLAGS simple and clean. This patch clears the CFLAGS and LDFLAGS passed when building fixdep, so such gcc problem won't block the perf build process. Signed-off-by: -
Masami Hiramatsu authored
The commit 05c8d802 ("perf probe: Fix to free temporal Dwarf_Frame") tried to fix the memory leak of Dwarf_Frame, but it released the frame at wrong point. Since the dwarf_frame_cfa(frame, &pf->fb_ops, &nops) can return an address inside the frame data structure to pf->fb_ops, we can not release the frame before using pf->fb_ops. This reverts the commit and releases the frame afterwards (right before returning from call_probe_finder) correctly. Reported-and-Tested-by:
Arnaldo Carvalho de Melo <acme@kernel.org> Reported-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Fixes: 05c8d802 ("perf probe: Fix to free temporal Dwarf_Frame") LPU-Reference: 20151125103432.1473.31009.stgit@localhost.localdomain Signed-off-by:
-
- 24 Nov, 2015 1 commit
-
-
Ingo Molnar authored
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: User visible changes: - Allow callchain order (caller, callee) to the libdw and libunwind based DWARF unwinders (Jiri Olsa) - Add missing parent_val initialization in the callchain code, fixing a SEGFAULT when using callchains with 'perf top' (Jiri Olsa) - Add initial 'perf config' command, for now just with a --list command to the contents of the configuration file in use and a basic man page describing its format, commands for doing edits and detailed documentation are being reviewed and proof-read. (Taeung Song) Signed-off-by:
-
- 23 Nov, 2015 11 commits
-
-
Steven Rostedt authored
When a long value is read on 32 bit machines for 64 bit output, the parsing needs to change "%lu" into "%llu", as the value is read natively. Unfortunately, if "%llu" is already there, the code will add another "l" to it and fail to parse it properly. Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Acked-by:
-
Jiri Olsa authored
Adding missing parent_val callchain_node initialization. It's causing segfault in perf top: $ sudo perf top -g perf: Segmentation fault -------- backtrace -------- free_callchain_node(+0x29) in perf [0x4a4b3e] free_callchain(+0x29) in perf [0x4a5a83] hist_entry__delete(+0x126) in perf [0x4c6649] hists__delete_entry(+0x6e) in perf [0x4c66dc] hists__decay_entries(+0x7d) in perf [0x4c6776] perf_top__sort_new_samples(+0x7c) in perf [0x436a78] hist_browser__run(+0xf2) in perf [0x507760] perf_evsel__hists_browse(+0x1da) in perf [0x507c8d] perf_evlist__tui_browse_hists(+0x3e) in perf [0x5088cf] display_thread_tui(+0x7f) in perf [0x437953] start_thread(+0xc5) in libpthread-2.21.so [0x7f7068fbb555] __clone(+0x6d) in libc-2.21.so [0x7f7066fc3b9d] [0x0] Reported-and-Tested-by:
-
Taeung Song authored
Add perf-config document to describe the perf configuration and a 'list’ subcommand. Signed-off-by:
Taeung Song <treeze.taeung@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/63AD9B57-7B8C-46F8-8F18-0FFEB9A6A1BC@gmail.comSigned-off-by:
-
Taeung Song authored
The perf configuration file contains many variables to change various aspects of each of its tools, including output, disk usage, etc. But looking at the state of configuration is difficult and there's no documentation about config variables except for the variables in perfconfig.example exist. So this patch adds a 'perf-config' command with a '--list' option. perf config [options] display current perf config variables. # perf config -l | --list Signed-off-by: -
Jiri Olsa authored
As reported by Milian, currently for DWARF unwind (both libdw and libunwind) we display callchain in callee order only. Adding the support to follow callchain order setup to libdw DWARF unwinder, so we could get following output for report: $ perf record --call-graph dwarf ls ... $ perf report --no-children --stdio 21.12% ls libc-2.21.so [.] __strcoll_l | ---__strcoll_l mpsort_with_tmp mpsort_with_tmp mpsort_with_tmp sort_files main __libc_start_main _start $ perf report --stdio --no-children -g caller 21.12% ls libc-2.21.so [.] __strcoll_l | ---_start __libc_start_main main sort_files mpsort_with_tmp mpsort_with_tmp mpsort_with_tmp __strcoll_l Reported-and-Tested-by:Milian Wolff <milian.wolff@kdab.com> Signed-off-by:
-
Jiri Olsa authored
Adding callchain order setup for DWARF unwinder test. The test now runs unwinder for both callee and caller orders. Signed-off-by:
-
Jiri Olsa authored
As reported by Milian, currently for DWARF unwind (both libdw and libunwind) we display callchain in callee order only. Adding the support to follow callchain order setup to libunwind DWARF unwinder, so we could get following output for report: $ perf record --call-graph dwarf ls ... $ perf report --no-children --stdio 39.26% ls libc-2.21.so [.] __strcoll_l | ---__strcoll_l mpsort_with_tmp mpsort_with_tmp sort_files main __libc_start_main _start 0 $ perf report -g caller --no-children --stdio ... 39.26% ls libc-2.21.so [.] __strcoll_l | ---0 _start __libc_start_main main sort_files mpsort_with_tmp mpsort_with_tmp __strcoll_l Based-on-patch-by: -
Jiri Olsa authored
Moving initial entry call into get_entries function so all entries processing is on one place. It will be useful for next change that adds ordering logic. Signed-off-by:
-
Andi Kleen authored
The earlier constraint fix for Broadwell CYCLE_ACTIVITY.* forced umask 8 to counter 2. For this it used UEVENT, to match the complete umask. The event list for Broadwell has an additional STALLS_L1D_PENDIND event that uses umask 8, but also sets other bits in the umask. The earlier strict umask match didn't handle this case. Add a new UBIT_EVENT constraint macro that only matches the specified bits in the umask. Then use that macro to handle CYCLE_ACTIVITY.* on Broadwell. The documented event also uses cmask, but there's no need to let the event scheduler know about the cmask, as the scheduling restriction is only tied to the umask. Reported-by:
Grant Ayers <ayers@cs.stanford.edu> Signed-off-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1447719667-9998-1-git-send-email-andi@firstfloor.org [ Filled in the missing email address of Grant Ayers - hopefully I got the right one. ] Signed-off-by:
-
Takao Indoh authored
This patch stops Intel PT logging and saves its registers in memory before kdump is started. This feature is needed to prevent Intel PT from overwriting its log buffer after panic, and saved registers are needed to find the last position where Intel PT wrote data. After the crash dump is captured by kdump, users can retrieve the log buffer from the vmcore and use it to investigate bad kernel behavior. Signed-off-by:
Takao Indoh <indou.takao@jp.fujitsu.com> Signed-off-by:
-
Takao Indoh authored
This patch add a function for external components to stop Intel PT. Basically this function is used when kernel panic occurs. When it is called, the intel_pt driver disables Intel PT and saves its registers using pt_event_stop(), which is also used by pmu.stop handler. This function stops Intel PT on the CPU where it is working, therefore users of it need to call it for each CPU to stop all logging. Signed-off-by:
-
