- 06 May, 2014 40 commits
-
-
Aaron Sanders authored
commit b16c02fb upstream. Add device ids to pl2303 for the Hewlett-Packard HP POS pole displays: LD960: 03f0:0B39 LCM220: 03f0:3139 LCM960: 03f0:3239 [ Johan: fix indentation and sort PIDs numerically ] Signed-off-by:
Aaron Sanders <aaron.sanders@hp.com> Signed-off-by:
Johan Hovold <jhovold@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Theodore Ts'o authored
commit 6e6358fc upstream. We haven't taken i_mutex yet, so we need to use i_size_read(). Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
Jan Kara authored
commit ec4cb1aa upstream. When heavily exercising xattr code the assertion that jbd2_journal_dirty_metadata() shouldn't return error was triggered: WARNING: at /srv/autobuild-ceph/gitbuilder.git/build/fs/jbd2/transaction.c:1237 jbd2_journal_dirty_metadata+0x1ba/0x260() CPU: 0 PID: 8877 Comm: ceph-osd Tainted: G W 3.10.0-ceph-00049-g68d04c9 #1 Hardware name: Dell Inc. PowerEdge R410/01V648, BIOS 1.6.3 02/07/2011 ffffffff81a1d3c8 ffff880214469928 ffffffff816311b0 ffff880214469968 ffffffff8103fae0 ffff880214469958 ffff880170a9dc30 ffff8802240fbe80 0000000000000000 ffff88020b366000 ffff8802256e7510 ffff880214469978 Call Trace: [<ffffffff816311b0>] dump_stack+0x19/0x1b [<ffffffff8103fae0>] warn_slowpath_common+0x70/0xa0 [<ffffffff8103fb2a>] warn_slowpath_null+0x1a/0x20 [<ffffffff81267c2a>] jbd2_journal_dirty_metadata+0x1ba/0x260 [<ffffffff81245093>] __ext4_handle_dirty_metadata+0xa3/0x140 [<ffffffff812561f3>] ext4_xattr_release_block+0x103/0x1f0 [<ffffffff81256680>] ext4_xattr_block_set+0x1e0/0x910 [<ffffffff8125795b>] ext4_xattr_set_handle+0x38b/0x4a0 [<ffffffff810a319d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff81257b32>] ext4_xattr_set+0xc2/0x140 [<ffffffff81258547>] ext4_xattr_user_set+0x47/0x50 [<ffffffff811935ce>] generic_setxattr+0x6e/0x90 [<ffffffff81193ecb>] __vfs_setxattr_noperm+0x7b/0x1c0 [<ffffffff811940d4>] vfs_setxattr+0xc4/0xd0 [<ffffffff8119421e>] setxattr+0x13e/0x1e0 [<ffffffff811719c7>] ? __sb_start_write+0xe7/0x1b0 [<ffffffff8118f2e8>] ? mnt_want_write_file+0x28/0x60 [<ffffffff8118c65c>] ? fget_light+0x3c/0x130 [<ffffffff8118f2e8>] ? mnt_want_write_file+0x28/0x60 [<ffffffff8118f1f8>] ? __mnt_want_write+0x58/0x70 [<ffffffff811946be>] SyS_fsetxattr+0xbe/0x100 [<ffffffff816407c2>] system_call_fastpath+0x16/0x1b The reason for the warning is that buffer_head passed into jbd2_journal_dirty_metadata() didn't have journal_head attached. This is caused by the following race of two ext4_xattr_release_block() calls: CPU1 CPU2 ext4_xattr_release_block() ext4_xattr_release_block() lock_buffer(bh); /* False */ if (BHDR(bh)->h_refcount == cpu_to_le32(1)) } else { le32_add_cpu(&BHDR(bh)->h_refcount, -1); unlock_buffer(bh); lock_buffer(bh); /* True */ if (BHDR(bh)->h_refcount == cpu_to_le32(1)) get_bh(bh); ext4_free_blocks() ... jbd2_journal_forget() jbd2_journal_unfile_buffer() -> JH is gone error = ext4_handle_dirty_xattr_block(handle, inode, bh); -> triggers the warning We fix the problem by moving ext4_handle_dirty_xattr_block() under the buffer lock. Sadly this cannot be done in nojournal mode as that function can call sync_dirty_buffer() which would deadlock. Luckily in nojournal mode the race is harmless (we only dirty already freed buffer) and thus for nojournal mode we leave the dirtying outside of the buffer lock. Reported-by:
Sage Weil <sage@inktank.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
alex chen authored
commit f7cf4f5b upstream. Do not put bh when buffer_uptodate failed in ocfs2_write_block and ocfs2_write_super_or_backup, because it will put bh in b_end_io. Otherwise it will hit a warning "VFS: brelse: Trying to free free buffer". Signed-off-by:
Alex Chen <alex.chen@huawei.com> Reviewed-by:
Joseph Qi <joseph.qi@huawei.com> Reviewed-by:
Srinivas Eeda <srinivas.eeda@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Acked-by:
Joel Becker <jlbec@evilplan.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Junxiao Bi authored
commit ded2cf71 upstream. There is a race window in dlm_do_recovery() between dlm_remaster_locks() and dlm_reset_recovery() when the recovery master nearly finish the recovery process for a dead node. After the master sends FINALIZE_RECO message in dlm_remaster_locks(), another node may become the recovery master for another dead node, and then send the BEGIN_RECO message to all the nodes included the old master, in the handler of this message dlm_begin_reco_handler() of old master, dlm->reco.dead_node and dlm->reco.new_master will be set to the second dead node and the new master, then in dlm_reset_recovery(), these two variables will be reset to default value. This will cause new recovery master can not finish the recovery process and hung, at last the whole cluster will hung for recovery. old recovery master: new recovery master: dlm_remaster_locks() become recovery master for another dead node. dlm_send_begin_reco_message() dlm_begin_reco_handler() { if (dlm->reco.state & DLM_RECO_STATE_FINALIZE) { return -EAGAIN; } dlm_set_reco_master(dlm, br->node_idx); dlm_set_reco_dead_node(dlm, br->dead_node); } dlm_reset_recovery() { dlm_set_reco_dead_node(dlm, O2NM_INVALID_NODE_NUM); dlm_set_reco_master(dlm, O2NM_INVALID_NODE_NUM); } will hang in dlm_remaster_locks() for request dlm locks info Before send FINALIZE_RECO message, recovery master should set DLM_RECO_STATE_FINALIZE for itself and clear it after the recovery done, this can break the race windows as the BEGIN_RECO messages will not be handled before DLM_RECO_STATE_FINALIZE flag is cleared. A similar race may happen between new recovery master and normal node which is in dlm_finalize_reco_handler(), also fix it. Signed-off-by:
Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by:
Wengang Wang <wen.gang.wang@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by:
-
Junxiao Bi authored
commit 34aa8dac upstream. This issue was introduced by commit 800deef3 ("ocfs2: use list_for_each_entry where benefical") in 2007 where it replaced list_for_each with list_for_each_entry. The variable "lock" will point to invalid data if "tmpq" list is empty and a panic will be triggered due to this. Sunil advised reverting it back, but the old version was also not right. At the end of the outer for loop, that list_for_each_entry will also set "lock" to an invalid data, then in the next loop, if the "tmpq" list is empty, "lock" will be an stale invalid data and cause the panic. So reverting the list_for_each back and reset "lock" to NULL to fix this issue. Another concern is that this seemes can not happen because the "tmpq" list should not be empty. Let me describe how. old lock resource owner(node 1): migratation target(node 2): image there's lockres with a EX lock from node 2 in granted list, a NR lock from node x with convert_type EX in converting list. dlm_empty_lockres() { dlm_pick_migration_target() { pick node 2 as target as its lock is the first one in granted list. } dlm_migrate_lockres() { dlm_mark_lockres_migrating() { res->state |= DLM_LOCK_RES_BLOCK_DIRTY; wait_event(dlm->ast_wq, !dlm_lockres_is_dirty(dlm, res)); //after the above code, we can not dirty lockres any more, // so dlm_thread shuffle list will not run downconvert lock from EX to NR upconvert lock from NR to EX <<< migration may schedule out here, then <<< node 2 send down convert request to convert type from EX to <<< NR, then send up convert request to convert type from NR to <<< EX, at this time, lockres granted list is empty, and two locks <<< in the converting list, node x up convert lock followed by <<< node 2 up convert lock. // will set lockres RES_MIGRATING flag, the following // lock/unlock can not run dlm_lockres_release_ast(dlm, res); } dlm_send_one_lockres() dlm_process_recovery_data() for (i=0; i<mres->num_locks; i++) if (ml->node == dlm->node_num) for (j = DLM_GRANTED_LIST; j <= DLM_BLOCKED_LIST; j++) { list_for_each_entry(lock, tmpq, list) if (lock) break; <<< lock is invalid as grant list is empty. } if (lock->ml.node != ml->node) BUG() >>> crash here } I see the above locks status from a vmcore of our internal bug. Signed-off-by:
-
Liu Hua authored
commit 80df2847 upstream. As sysctl_hung_task_timeout_sec is unsigned long, when this value is larger then LONG_MAX/HZ, the function schedule_timeout_interruptible in watchdog will return immediately without sleep and with print : schedule_timeout: wrong timeout value ffffffffffffff83 and then the funtion watchdog will call schedule_timeout_interruptible again and again. The screen will be filled with "schedule_timeout: wrong timeout value ffffffffffffff83" This patch does some check and correction in sysctl, to let the function schedule_timeout_interruptible allways get the valid parameter. Signed-off-by:
Liu Hua <sdu.liu@huawei.com> Tested-by:
Satoru Takeuchi <satoru.takeuchi@gmail.com> Signed-off-by:
-
Mizuma, Masayoshi authored
commit 55f67141 upstream. When I decrease the value of nr_hugepage in procfs a lot, softlockup happens. It is because there is no chance of context switch during this process. On the other hand, when I allocate a large number of hugepages, there is some chance of context switch. Hence softlockup doesn't happen during this process. So it's necessary to add the context switch in the freeing process as same as allocating process to avoid softlockup. When I freed 12 TB hugapages with kernel-2.6.32-358.el6, the freeing process occupied a CPU over 150 seconds and following softlockup message appeared twice or more. $ echo 6000000 > /proc/sys/vm/nr_hugepages $ cat /proc/sys/vm/nr_hugepages 6000000 $ grep ^Huge /proc/meminfo HugePages_Total: 6000000 HugePages_Free: 6000000 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB $ echo 0 > /proc/sys/vm/nr_hugepages BUG: soft lockup - CPU#16 stuck for 67s! [sh:12883] ... Pid: 12883, comm: sh Not tainted 2.6.32-358.el6.x86_64 #1 Call Trace: free_pool_huge_page+0xb8/0xd0 set_max_huge_pages+0x128/0x190 hugetlb_sysctl_handler_common+0x113/0x140 hugetlb_sysctl_handler+0x1e/0x20 proc_sys_call_handler+0x97/0xd0 proc_sys_write+0x14/0x20 vfs_write+0xb8/0x1a0 sys_write+0x51/0x90 __audit_syscall_exit+0x265/0x290 system_call_fastpath+0x16/0x1b I have not confirmed this problem with upstream kernels because I am not able to prepare the machine equipped with 12TB memory now. However I confirmed that the amount of decreasing hugepages was directly proportional to the amount of required time. I measured required times on a smaller machine. It showed 130-145 hugepages decreased in a millisecond. Amount of decreasing Required time Decreasing rate hugepages (msec) (pages/msec) ------------------------------------------------------------ 10,000 pages == 20GB 70 - 74 135-142 30,000 pages == 60GB 208 - 229 131-144 It means decrement of 6TB hugepages will trigger softlockup with the default threshold 20sec, in this decreasing rate. Signed-off-by:
Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
-
Vlastimil Babka authored
commit 57e68e9c upstream. A BUG_ON(!PageLocked) was triggered in mlock_vma_page() by Sasha Levin fuzzing with trinity. The call site try_to_unmap_cluster() does not lock the pages other than its check_page parameter (which is already locked). The BUG_ON in mlock_vma_page() is not documented and its purpose is somewhat unclear, but apparently it serializes against page migration, which could otherwise fail to transfer the PG_mlocked flag. This would not be fatal, as the page would be eventually encountered again, but NR_MLOCK accounting would become distorted nevertheless. This patch adds a comment to the BUG_ON in mlock_vma_page() and munlock_vma_page() to that effect. The call site try_to_unmap_cluster() is fixed so that for page != check_page, trylock_page() is attempted (to avoid possible deadlocks as we already have check_page locked) and mlock_vma_page() is performed only upon success. If the page lock cannot be obtained, the page is left without PG_mlocked, which is again not a problem in the whole unevictable memory design. Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
Bob Liu <bob.liu@oracle.com> Reported-by:
Sasha Levin <sasha.levin@oracle.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Michel Lespinasse <walken@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by:
Rik van Riel <riel@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
-
Matt Fleming authored
commit a0c32761 upstream. Kees reported the following error: arch/sh/kernel/dumpstack.c: In function 'print_trace_address': arch/sh/kernel/dumpstack.c:118:2: error: format not a string literal and no format arguments [-Werror=format-security] Use the "%s" format so that it's impossible to interpret 'data' as a format string. Signed-off-by:
Matt Fleming <matt.fleming@intel.com> Reported-by:
Kees Cook <keescook@chromium.org> Acked-by:
-
Felipe Franciosi authored
commit 1044b1bb upstream. We need to set the queue bounce limit during the device initialization to prevent excessive bouncing on 32 bit architectures. Signed-off-by:
Felipe Franciosi <felipe@paradoxo.org> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Alan Stern authored
commit 6aec044c upstream. When a driver doesn't have pre_reset, post_reset, or reset_resume methods, the USB core unbinds that driver when its device undergoes a reset or a reset-resume, and then rebinds it afterward. The existing straightforward implementation can lead to problems, because each interface gets unbound and rebound before the next interface is handled. If a driver claims additional interfaces, the claim may fail because the old binding instance may still own the additional interface when the new instance tries to claim it. This patch fixes the problem by first unbinding all the interfaces that are marked (i.e., their needs_binding flag is set) and then rebinding all of them. The patch also makes the helper functions in driver.c a little more uniform and adjusts some out-of-date comments. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by:
"Poulain, Loic" <loic.poulain@intel.com> Signed-off-by:
-
Michal Simek authored
commit ead5178b upstream. Add new ulpi IDs which are available on Xilinx Zynq boards. Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Signed-off-by:
-
Paul Gortmaker authored
commit f76a1cbe upstream. Commit 3e6c6f63 ("Delay creation of khcvd thread") moved the call of hvc_init from being a device_initcall into hvc_alloc, and used a non-null hvc_driver as indication of whether hvc_init had already been called. The problem with this is that hvc_driver is only assigned a value at the bottom of hvc_init, and so there is a window where multiple hvc_alloc calls can be in progress at the same time and hence try and call hvc_init multiple times. Previously the use of device_init guaranteed that hvc_init was only called once. This manifests itself as sporadic instances of two hvc_init calls racing each other, and with the loser of the race getting -EBUSY from tty_register_driver() and hence that virtual console fails: Couldn't register hvc console driver virtio-ports vport0p1: error -16 allocating hvc for port Here we add an atomic_t to guarantee we'll never run hvc_init twice. Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Fixes: 3e6c6f63 ("Delay creation of khcvd thread") Reported-by:
Jim Somerville <Jim.Somerville@windriver.com> Tested-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
-
Huang Rui authored
commit 06f9b6e5 upstream. Around DWC USB3 2.30a release another bit has been added to the Device-Specific Event (DEVT) Event Information (EvtInfo) bitfield. Because of that, what used to be 8 bits long, has become 9 bits long. Per dwc3 2.30a+ spec in the Device-Specific Event (DEVT), the field of Event Information Bits(EvtInfo) uses [24:16] bits, and it has 9 bits not 8 bits. And the following reserved field uses [31:25] bits not [31:24] bits, and it has 7 bits. So in dwc3_event_devt, the bit mask should be: event_info [24:16] 9 bits reserved31_25 [31:25] 7 bits This patch makes sure that newer core releases will work fine with Linux and that we will decode the event information properly on new core releases. [ balbi@ti.com : improve commit log a bit ] Signed-off-by:
Huang Rui <ray.huang@amd.com> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Wolfram Sang authored
commit 61f03191 upstream. Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by:
-
Florian Vaussard authored
commit 8b57b966 upstream. Commit 3fdfedaa "[media] omap3isp: preview: Lower the crop margins" accidentally changed the previewer's cropping, causing the previewer to miss four pixels on each line, thus corrupting the final image. Restored the removed setting. Signed-off-by:
Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Hans Verkuil authored
commit 30d65282 upstream. Do not attempt to reload the tuner modules when resuming after a suspend. This triggers a WARN_ON in kernel/kmod.c:148 __request_module. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=69581. This has always been wrong, but it was never noticed until the WARN_ON was added in 3.9. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Antti Palosaari authored
commit 3ec40dcf upstream. Pointer to device state has been moved to different location during some change. PCTV 290e LNA function still uses old pointer, carried over FE priv, and it crash. Reported-by:
Janne Kujanpää <jikuja@iki.fi> Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Malcolm Priestley authored
commit 3c8023a7 upstream. The m88rs2000 frontend is always auto inversion. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Malcolm Priestley authored
commit 8272d0a0 upstream. Add m88rs2000_get_tune_settings, min delay of 2000 ms on symbol rate more than 3000000 and delay of 3000ms less than this. Adding min delay prevents crashing the frontend on continuous transponder scans. Other dvb_frontend_tune_settings remain as default. This makes very little time difference to good channel scans, but slows down the set frontend where lock can never be achieved i.e. DVB-S2. Signed-off-by:
-
Hans Verkuil authored
commit bc826d6e upstream. The wrong ioctl numbers were used due to a copy-and-paste error. Signed-off-by:
-
Oleksij Rempel authored
commit b1e43f23 upstream. The UVC specification uses alternate setting selection to notify devices of stream start/stop. This breaks when using bulk-based devices, as the video streaming interface has a single alternate setting in that case, making video stream start and video stream stop events to appear identical to the device. Bulk-based devices are thus not well supported by UVC. The webcam built in the Asus Zenbook UX302LA ignores the set interface request and will keep the video stream enabled when the driver tries to stop it. If USB autosuspend is enabled the device will then be suspended and will crash, requiring a cold reboot. USB trace capture showed that Windows sends a CLEAR_FEATURE(HALT) request to the bulk endpoint when stopping the stream instead of selecting alternate setting 0. The camera then behaves correctly, and thus seems to require that behaviour. Replace selection of alternate setting 0 with clearing of the endpoint halt feature at video stream stop for bulk-based devices. Let's refrain from blaming Microsoft this time, as it's not clear whether this Windows-specific but USB-compliant behaviour was specifically developed to handle bulkd-based UVC devices, or if the camera just took advantage of it. Signed-off-by:
Oleksij Rempel <linux@rempel-privat.de> Signed-off-by:
-
David Cohen authored
commit 01bb59eb upstream. When CONFIG_PCI and CONFIG_PM are not selected, xhci.c gets this warning: drivers/usb/host/xhci.c:409:13: warning: ‘xhci_msix_sync_irqs’ defined but not used [-Wunused-function] Instead of creating nested #ifdefs, this patch fixes it by defining the xHCI PCI stubs as inline. This warning has been in since 3.2 kernel and was caused by commit 421aa841 "usb/xhci: hide MSI code behind PCI bars", but wasn't noticed until 3.13 when a configuration with these options was tried Signed-off-by:
David Cohen <david.a.cohen@linux.intel.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Igor Gnatenko authored
commit 6db249eb upstream. After suspend another Renesas PCI-X USB 3.0 card doesn't work. [root@fedora-20 ~]# lspci -vmnnd 1912: Device: 03:00.0 Class: USB controller [0c03] Vendor: Renesas Technology Corp. [1912] Device: uPD720202 USB 3.0 Host Controller [0015] SVendor: Renesas Technology Corp. [1912] SDevice: uPD720202 USB 3.0 Host Controller [0015] Rev: 02 ProgIf: 30 This patch should be applied to stable kernel 3.14 that contain the commit 1aa9578c "xhci: Fix resume issues on Renesas chips in Samsung laptops" Reported-and-tested-by:
Anatoly Kharchenko <rfr-bugs@yandex.ru> Reference: http://redmine.russianfedora.pro/issues/1315Signed-off-by:
Igor Gnatenko <i.gnatenko.brain@gmail.com> Signed-off-by:
-
Mathias Nyman authored
commit bcffae77 upstream. xHCI driver has its own pci probe function that will call usb_hcd_pci_probe to register its usb-2 bus, and then continue to manually register the usb-3 bus. usb_hcd_pci_probe does a pm_runtime_put_noidle at the end and might thus trigger a runtime suspend before the usb-3 bus is ready. Prevent the runtime suspend by increasing the usage count in the beginning of xhci_pci_probe, and decrease it once the usb-3 bus is ready. xhci-platform driver is not using usb_hcd_pci_probe to set up busses and should not need to have it's usage count increased during probe. Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Acked-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by:
-
Roger Quadros authored
commit 9c1b7036 upstream. It was impossible to enumerate on a SuperSpeed (XHCI) host with alternate setting = 1 due to the wrongly set 'bMaxBurst' field in the SuperSpeed Endpoint Companion descriptor. Testcase: <host> modprobe -r usbtest; modprobe usbtest alt=1 <device> modprobe g_zero plug device to SuperSpeed port on the host. Without this patch the host always complains like so "usb 12-2: Not enough bandwidth for new device state. usb 12-2: Not enough bandwidth for altsetting 1" Bug was introduced by commit cf9a08ae in v3.9 Fixes: cf9a08ae (usb: gadget: convert source sink and loopback to new function interface) Reviewed-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
-
Kees Cook authored
commit aba37fd9 upstream. This makes sure that the name coming out of configfs cannot be used accidentally as a format string. Signed-off-by:
-
Jeff Mahoney authored
commit 01d88857 upstream. jdm-20004 reiserfs_delete_xattrs: Couldn't delete all xattrs (-2) The -ENOENT is due to readdir calling dir_emit on the same entry twice. If the dir_emit callback sleeps and the tree is changed underneath us, we won't be able to trust deh_offset(deh) anymore. We need to save next_pos before we might sleep so we can find the next entry. Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Signed-off-by:
-
Matt Fleming authored
commit 7e8213c1 upstream. code32_start should point at the start of the protected mode code, and *not* at the beginning of the bzImage. This is much easier to do in assembly so document that callers of make_boot_params() need to fill out code32_start. The fallout from this bug is that we would end up relocating the image but copying the image at some offset, resulting in what appeared to be memory corruption. Reported-by:
Thomas Bächler <thomas@archlinux.org> Signed-off-by:
-
Andy Grover authored
commit 2c42be2d upstream. ft_del_tpg checks tpg->tport is set before unlinking the tpg from the tport when the tpg is being removed. Set this pointer in ft_tport_create, or the unlinking won't happen in ft_del_tpg and tport->tpg will reference a deleted object. This patch sets tpg->tport in ft_tport_create, because that's what ft_del_tpg checks, and is the only way to get back to the tport to clear tport->tpg. The bug was occuring when: - lport created, tport (our per-lport, per-provider context) is allocated. tport->tpg = NULL - tpg created - a PRLI is received. ft_tport_create is called, tpg is found and tport->tpg is set - tpg removed. ft_tpg is freed in ft_del_tpg. Since tpg->tport was not set, tport->tpg is not cleared and points at freed memory - Future calls to ft_tport_create return tport via first conditional, instead of searching for new tpg by calling ft_lport_find_tpg. tport->tpg is still invalid, and will access freed memory. see https://bugzilla.redhat.com/show_bug.cgi?id=1071340Signed-off-by:
Andy Grover <agrover@redhat.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Nicholas Bellinger authored
commit d444edc6 upstream. This patch fixes a long-standing bug in iscsit_build_conn_drop_async_message() where during ERL=2 connection recovery, a bogus conn_p pointer could end up being used to send the ISCSI_OP_ASYNC_EVENT + DROPPING_CONNECTION notifying the initiator that cmd->logout_cid has failed. The bug was manifesting itself as an OOPs in iscsit_allocate_cmd() with a bogus conn_p pointer in iscsit_build_conn_drop_async_message(). Reported-by:
Arshad Hussain <arshad.hussain@calsoftinc.com> Reported-by:
santosh kulkarni <santosh.kulkarni@calsoftinc.com> Signed-off-by:
-
Dan Carpenter authored
commit e2c70425 upstream. The original code always set the upper 32 bits to zero because it was doing a shift of the wrong variable. Fixes: 1a4f550a ('[SCSI] arcmsr: 1.20.00.15: add SATA RAID plus other fixes') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com> Signed-off-by:
-
Dan Carpenter authored
commit b2a72ec3 upstream. qla2x00_mem_alloc() returns 1 on success and -ENOMEM on failure. On the one hand the caller assumes non-zero is success but on the other hand the caller also assumes that it returns an error code. I've fixed it to return zero on success and a negative error code on failure. This matches the documentation as well. [jejb: checkpatch fix] Fixes: e315cd28 ('[SCSI] qla2xxx: Code changes for qla data structure refactoring') Signed-off-by:
Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by:
-
Mike Marciniszyn authored
commit b0768080 upstream. The code was incorrectly using sg_dma_address() and sg_dma_len() instead of ib_sg_dma_address() and ib_sg_dma_len(). This prevents srpt from functioning with the Intel HCA and indeed will corrupt memory badly. Cc: Bart Van Assche <bvanassche@acm.org> Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Tested-by:
Vinod Kumar <vinod.kumar@intel.com> Signed-off-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
-
Yann Droneaud authored
commit 5bdb0f02 upstream. In case of error when writing to userspace, function ehca_create_cq() does not set an error code before following its error path. This patch sets the error code to -EFAULT when ib_copy_to_udata() fails. This was caught when using spatch (aka. coccinelle) to rewrite call to ib_copy_{from,to}_udata(). Link: https://www.gitorious.org/opteya/coccib/source/75ebf2c1033c64c1d81df13e4ae44ee99c989eba:ib_copy_udata.cocci Link: http://marc.info/?i=cover.1394485254.git.ydroneaud@opteya.comSigned-off-by:
Yann Droneaud <ydroneaud@opteya.com> Signed-off-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
-
Yann Droneaud authored
commit 08e74c4b upstream. In case of error when writing to userspace, the function mthca_create_cq() does not set an error code before following its error path. This patch sets the error code to -EFAULT when ib_copy_to_udata() fails. This was caught when using spatch (aka. coccinelle) to rewrite call to ib_copy_{from,to}_udata(). Link: https://www.gitorious.org/opteya/coccib/source/75ebf2c1033c64c1d81df13e4ae44ee99c989eba:ib_copy_udata.cocci Link: http://marc.info/?i=cover.1394485254.git.ydroneaud@opteya.comSigned-off-by:
-
Yann Droneaud authored
commit 9d194d10 upstream. In case of error while accessing to userspace memory, function nes_create_qp() returns NULL instead of an error code wrapped through ERR_PTR(). But NULL is not expected by ib_uverbs_create_qp(), as it check for error with IS_ERR(). As page 0 is likely not mapped, it is going to trigger an Oops when the kernel will try to dereference NULL pointer to access to struct ib_qp's fields. In some rare cases, page 0 could be mapped by userspace, which could turn this bug to a vulnerability that could be exploited: the function pointers in struct ib_device will be under userspace total control. This was caught when using spatch (aka. coccinelle) to rewrite calls to ib_copy_{from,to}_udata(). Link: https://www.gitorious.org/opteya/ib-hw-nes-create-qp-null Link: https://www.gitorious.org/opteya/coccib/source/75ebf2c1033c64c1d81df13e4ae44ee99c989eba:ib_copy_udata.cocci Link: http://marc.info/?i=cover.1394485254.git.ydroneaud@opteya.comSigned-off-by:
-
Dennis Dalessandro authored
commit a2cb0eb8 upstream. Guard against a potential buffer overrun. The size to read from the user is passed in, and due to the padding that needs to be taken into account, as well as the place holder for the ICRC it is possible to overflow the 32bit value which would cause more data to be copied from user space than is allocated in the buffer. Reported-by:
Nico Golde <nico@ngolde.de> Reported-by:
Fabian Yamaguchi <fabs@goesec.de> Reviewed-by:
-
Jeff Layton authored
commit 3758cf7e upstream. ...otherwise the logic in the timeout handling doesn't work correctly. Spotted-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
