Merge tag 'scmi-fix-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes

Arm SCMI fix for v6.4

Single fix for incorrect invocation of alloc_workqueue() where WQ_SYSFS
flag is passed as @max_active parameter instead of OR'ing with the other
flags in the @flags parameter.

* tag 'scmi-fix-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  firmware: arm_scmi: Fix incorrect alloc_workqueue() invocation

Link: https://lore.kernel.org/r/20230509143529.1188812-1-sudeep.holla@arm.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'juno-fixes-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes

Arm FVP/Vexpress fixes for v6.4

Couple of fixes to address the missing required 'cache-unified' property
in the level 2 and 3 caches on some of the FVP/vexpress platforms.

* tag 'juno-fixes-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  arm64: dts: arm: add missing cache properties
  ARM: dts: vexpress: add missing cache properties

Link: https://lore.kernel.org/r/20230509143508.1188786-1-sudeep.holla@arm.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'optee-async-notif-fix-for-v6.3' of https://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes

Fixes an uninitialized variable in OP-TEE driver

* tag 'optee-async-notif-fix-for-v6.3' of https://git.linaro.org/people/jens.wiklander/linux-tee:
  optee: fix uninited async notif value

Link: https://lore.kernel.org/r/20230421075443.GA3136581@raydenSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Pull UML fix from Richard Weinberger:

 - Fix modular build for UML watchdog

* tag 'uml-for-linus-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
  um: harddog: fix modular build

Pull kvm fixes from Paolo Bonzini:
 "ARM:

   - Plug a race in the stage-2 mapping code where the IPA and the PA
     would end up being out of sync

   - Make better use of the bitmap API (bitmap_zero, bitmap_zalloc...)

   - FP/SVE/SME documentation update, in the hope that this field
     becomes clearer...

   - Add workaround for Apple SEIS brokenness to a new SoC

   - Random comment fixes

  x86:

   - add MSR_IA32_TSX_CTRL into msrs_to_save

   - fixes for XCR0 handling in SGX enclaves

  Generic:

   - Fix vcpu_array[0] races

   - Fix race between starting a VM and 'reboot -f'"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: VMX: add MSR_IA32_TSX_CTRL into msrs_to_save
  KVM: x86: Don't adjust guest's CPUID.0x12.1 (allowed SGX enclave XFRM)
  KVM: VMX: Don't rely _only_ on CPUID to enforce XCR0 restrictions for ECREATE
  KVM: Fix vcpu_array[0] races
  KVM: VMX: Fix header file dependency of asm/vmx.h
  KVM: Don't enable hardware after a restart/shutdown is initiated
  KVM: Use syscore_ops instead of reboot_notifier to hook restart/shutdown
  KVM: arm64: vgic: Add Apple M2 PRO/MAX cpus to the list of broken SEIS implementations
  KVM: arm64: Clarify host SME state management
  KVM: arm64: Restructure check for SVE support in FP trap handler
  KVM: arm64: Document check for TIF_FOREIGN_FPSTATE
  KVM: arm64: Fix repeated words in comments
  KVM: arm64: Constify start/end/phys fields of the pgtable walker data
  KVM: arm64: Infer PA offset from VA in hyp map walker
  KVM: arm64: Infer the PA offset from IPA in stage-2 map walker
  KVM: arm64: Use the bitmap API to allocate bitmaps
  KVM: arm64: Slightly optimize flush_context()

Merge tag 'perf-tools-fixes-for-v6.4-1-2023-05-20' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fail graciously if BUILD_BPF_SKEL=1 is specified and clang isn't
   available

 - Add empty 'struct rq' to 'perf lock contention' to satisfy libbpf
   'runqueue' type verification. This feature is built only with
   BUILD_BPF_SKEL=1

 - Make vmlinux.h use bpf.h and perf_event.h in source directory, not
   system ones that may be old and not have things like 'union
   perf_sample_weight'

 - Add system include paths to BPF builds to pick things missing in the
   headers included by clang -target bpf

 - Update various header copies with the kernel sources

 - Change divide by zero and not supported events behavior to show
   'nan'/'not counted' in 'perf stat' output.

   This happens when using things like 'perf stat -M TopdownL2 true',
   involving JSON metrics

 - Update no event/metric expectations affected by using JSON metrics in
   'perf stat -ddd' perf test

 - Avoid segv with 'perf stat --topdown' for metrics without a group

 - Do not assume which events may have a PMU name, allowing the logic to
   keep an AUX event group together. Makes this usecase work again:

     $ perf record --no-bpf-event -c 10 -e '{intel_pt//,tlb_flush.stlb_any/aux-sample-size=8192/pp}:u' -- sleep 0.1
     [ perf record: Woken up 1 times to write data ]
     [ perf record: Captured and wrote 0.078 MB perf.data ]
     $ perf script -F-dso,+addr | grep -C5 tlb_flush.stlb_any | head -11
     sleep 20444 [003]  7939.510243:  1  branches:uH:  7f5350cc82a2 dl_main+0x9a2 => 7f5350cb38f0 _dl_add_to_namespace_list+0x0
     sleep 20444 [003]  7939.510243:  1  branches:uH:  7f5350cb3908 _dl_add_to_namespace_list+0x18 => 7f5350cbb080 rtld_mutex_dummy+0x0
     sleep 20444 [003]  7939.510243:  1  branches:uH:  7f5350cc8350 dl_main+0xa50 => 0 [unknown]
     sleep 20444 [003]  7939.510244:  1  branches:uH:  7f5350cc83ca dl_main+0xaca => 7f5350caeb60 _dl_process_pt_gnu_property+0x0
     sleep 20444 [003]  7939.510245:  1  branches:uH:  7f5350caeb60 _dl_process_pt_gnu_property+0x0 => 0 [unknown]
     sleep 20444  7939.510245:       10 tlb_flush.stlb_any/aux-sample-size=8192/pp: 0 7f5350caeb60 _dl_process_pt_gnu_property+0x0
     sleep 20444 [003]  7939.510254:  1  branches:uH:  7f5350cc87fe dl_main+0xefe => 7f5350ccd240 strcmp+0x0
     sleep 20444 [003]  7939.510254:  1  branches:uH:  7f5350cc8862 dl_main+0xf62 => 0 [unknown]

 - Add a check for the above use case in 'perf test test_intel_pt'

 - Fix build with refcount checking on arm64, it was still accessing
   fields that need to be wrapped so that the refcounted struct gets
   checked

 - Fix contextid validation in ARM's CS-ETM, so that older kernels
   without that field can still be supported

 - Skip unsupported aggregation for stat events found in perf.data files
   in 'perf script'

 - Add stat test for record and script to check the previous problem

 - Remove needless debuginfod queries from 'perf test java symbol', this
   was just making the test take a long time to complete

 - Address python SafeConfigParser() deprecation warning in 'perf test
   attr'

 - Fix __NR_execve undeclared on i386 'perf bench syscall' build error

* tag 'perf-tools-fixes-for-v6.4-1-2023-05-20' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (33 commits)
  perf bench syscall: Fix __NR_execve undeclared build error
  perf test attr: Fix python SafeConfigParser() deprecation warning
  perf test attr: Update no event/metric expectations
  tools headers disabled-features: Sync with the kernel sources
  tools headers UAPI: Sync arch prctl headers with the kernel sources
  tools headers: Update the copy of x86's mem{cpy,set}_64.S used in 'perf bench'
  tools headers x86 cpufeatures: Sync with the kernel sources
  tools headers UAPI: Sync s390 syscall table file that wires up the memfd_secret syscall
  tools headers UAPI: Sync linux/prctl.h with the kernel sources
  perf metrics: Avoid segv with --topdown for metrics without a group
  perf lock contention: Add empty 'struct rq' to satisfy libbpf 'runqueue' type verification
  perf cs-etm: Fix contextid validation
  perf arm64: Fix build with refcount checking
  perf test: Add stat test for record and script
  perf script: Skip aggregation for stat events
  perf build: Add system include paths to BPF builds
  perf bpf skels: Make vmlinux.h use bpf.h and perf_event.h in source directory
  perf parse-events: Do not break up AUX event group
  perf test test_intel_pt.sh: Test sample mode with event with PMU name
  perf evsel: Modify group pmu name for software events
  ...

Pull powerpc fixes from Michael Ellerman:

 - Fix broken soft dirty tracking when using the Radix MMU (>= P9)

 - Fix ISA mapping when "ranges" property is not present, for PASemi
   Nemo boards

 - Fix a possible WARN_ON_ONCE hitting in BPF extable handling

 - Fix incorrect DMA address handling when using 2MB TCEs

 - Fix a bug in IOMMU table handling for SR-IOV devices

 - Fix the recent rework of IOMMU handling which left arch code calling
   clean up routines that are handled by the IOMMU core

 - A few assorted build fixes

Thanks to Christian Zigotzky, Dan Horák, Gaurav Batra, Hari Bathini,
Jason Gunthorpe, Nathan Chancellor, Naveen N. Rao, Nicholas Piggin, Pali
Rohár, Randy Dunlap, and Rob Herring.

* tag 'powerpc-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/iommu: Incorrect DDW Table is referenced for SR-IOV device
  powerpc/iommu: DMA address offset is incorrectly calculated with 2MB TCEs
  powerpc/iommu: Remove iommu_del_device()
  powerpc/crypto: Fix aes-gcm-p10 build when VSX=n
  powerpc/bpf: populate extable entries only during the last pass
  powerpc/boot: Disable power10 features after BOOTAFLAGS assignment
  powerpc/64s/radix: Fix soft dirty tracking
  powerpc/fsl_uli1575: fix kconfig warnings and build errors
  powerpc/isa-bridge: Fix ISA mapping when "ranges" is not present

Pull ata fix from Damien Le Moal:

 - Fix DT binding for the ahci-ceva driver to fully describe all iommus,
   from Michal

* tag 'ata-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  dt-bindings: ata: ahci-ceva: Cover all 4 iommus entries

Pull fbdev fixes from Helge Deller:
 "A few small unspectacular fbdev fixes:

   - Fix for USB endpoint check in udlfb (found by syzbot fuzzer)

   - Small fix in error code path in omapfb

   - compiler warning fixes in fbmem & i810

   - code removal and whitespace cleanups in stifb and atyfb"

* tag 'fbdev-for-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
  fbdev: stifb: Whitespace cleanups
  fbdev: udlfb: Use usb_control_msg_send()
  fbdev: udlfb: Fix endpoint check
  fbdev: atyfb: Remove unused clock determination
  fbdev: i810: include i810_main.h in i810_dvt.c
  fbdev: fbmem: mark get_fb_unmapped_area() static
  fbdev: omapfb: panel-tpo-td043mtea1: fix error code in probe()

Pull ksmbd server fixes from Steve French:

 - two fixes for incorrect SMB3 message validation (one for client which
   uses 8 byte padding, and one for empty bcc)

 - two fixes for out of bounds bugs: one for username offset checks (in
   session setup) and the other for create context name length checks in
   open requests

* tag '6.4-rc2-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
  ksmbd: smb2: Allow messages padded to 8byte boundary
  ksmbd: allocate one more byte for implied bcc[0]
  ksmbd: fix wrong UserName check in session_user
  ksmbd: fix global-out-of-bounds in smb2_find_context_vals

Pull cifs client fixes from Steve French:
 "Two smb3 client fixes, both related to deferred close, and also for
  stable:

   - send close for deferred handles before not after lease break
     response to avoid possible sharing violations

   - check all opens on an inode (looking for deferred handles) when
     lease break is returned not just the handle the lease break came in
     on"

* tag '6.4-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  SMB3: drop reference to cfile before sending oplock break
  SMB3: Close all deferred handles of inode in case of handle lease break

Add MSR_IA32_TSX_CTRL into msrs_to_save[] to explicitly tell userspace to
save/restore the register value during migration. Missing this may cause
userspace that relies on KVM ioctl(KVM_GET_MSR_INDEX_LIST) fail to port the
value to the target VM.

In addition, there is no need to add MSR_IA32_TSX_CTRL when
ARCH_CAP_TSX_CTRL_MSR is not supported in kvm_get_arch_capabilities(). So
add the checking in kvm_probe_msr_to_save().

Fixes: c11f83e0 ("KVM: vmx: implement MSR_IA32_TSX_CTRL disable RTM functionality")
Reported-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20230509032348.1153070-1-mizhang@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Drop KVM's manipulation of guest's CPUID.0x12.1 ECX and EDX, i.e. the
allowed XFRM of SGX enclaves, now that KVM explicitly checks the guest's
allowed XCR0 when emulating ECREATE.

Note, this could theoretically break a setup where userspace advertises
a "bad" XFRM and relies on KVM to provide a sane CPUID model, but QEMU
is the only known user of KVM SGX, and QEMU explicitly sets the SGX CPUID
XFRM subleaf based on the guest's XCR0.
Reviewed-by: Kai Huang <kai.huang@intel.com>
Tested-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230503160838.3412617-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Explicitly check the vCPU's supported XCR0 when determining whether or not
the XFRM for ECREATE is valid.  Checking CPUID works because KVM updates
guest CPUID.0x12.1 to restrict the leaf to a subset of the guest's allowed
XCR0, but that is rather subtle and KVM should not modify guest CPUID
except for modeling true runtime behavior (allowed XFRM is most definitely
not "runtime" behavior).
Reviewed-by: Kai Huang <kai.huang@intel.com>
Tested-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230503160838.3412617-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Missed whitespace cleanups in stifb.

Fixes: 80004257 ("fbdev: stifb: Remove trailing whitespaces")
Signed-off-by: Helge Deller <deller@gmx.de>

Use the newly introduced usb_control_msg_send() instead of usb_control_msg()
when selecting the channel.
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Helge Deller <deller@gmx.de>

Pull tty / serial fixes from Greg KH:
 "Here are some small tty and serial driver fixes for 6.4-rc3 to resolve
  some reported problems, and add some new device ids. These include:

   - termios documentation updates

   - vc_screen use-after-free fix

   - memory leak fix in arc_uart driver

   - new 8250 driver ids

   - other small serial driver fixes

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'tty-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  vc_screen: reload load of struct vc_data pointer in vcs_write() to avoid UAF
  serial: qcom-geni: fix enabling deactivated interrupt
  serial: 8250_bcm7271: fix leak in `brcmuart_probe`
  serial: 8250_bcm7271: balance clk_enable calls
  serial: arc_uart: fix of_iomap leak in `arc_serial_probe`
  serial: 8250: Document termios parameter of serial8250_em485_config()
  serial: Add support for Advantech PCI-1611U card
  serial: 8250_exar: Add support for USR298x PCI Modems

Pull USB / Thunderbolt fixes from Greg KH:
 "Here are some USB fixes for 6.4-rc3, as well as a driver core fix that
  resolves a memory leak that shows up in USB devices easier than other
  subsystems.

  Included in here are:

   - driver core memory leak as reported and tested by syzbot and
     developers

   - dwc3 driver fixes for reported problems

   - xhci driver fixes for reported problems

   - USB gadget driver reverts to resolve regressions

   - usbtmc driver fix for syzbot reported problem

   - thunderbolt driver fixes for reported issues

   - other small USB fixes

  All of these, except for the driver core fix, have been in linux-next
  with no reported problems. The driver core fix was tested and verified
  to solve the issue by syzbot and the original reporter"

* tag 'usb-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  driver core: class: properly reference count class_dev_iter()
  xhci: Fix incorrect tracking of free space on transfer rings
  xhci-pci: Only run d3cold avoidance quirk for s2idle
  usb-storage: fix deadlock when a scsi command timeouts more than once
  usb: dwc3: fix a test for error in dwc3_core_init()
  usb: typec: tps6598x: Fix fault at module removal
  usb: gadget: u_ether: Fix host MAC address case
  usb: typec: altmodes/displayport: fix pin_assignment_show
  Revert "usb: gadget: udc: core: Invoke usb_gadget_connect only when started"
  Revert "usb: gadget: udc: core: Prevent redundant calls to pullup"
  usb: gadget: drop superfluous ':' in doc string
  usb: dwc3: debugfs: Resume dwc3 before accessing registers
  USB: UHCI: adjust zhaoxin UHCI controllers OverCurrent bit value
  usb: dwc3: fix gadget mode suspend interrupt handler issue
  usb: dwc3: gadget: Improve dwc3_gadget_suspend() and dwc3_gadget_resume()
  USB: usbtmc: Fix direction for 0-length ioctl control messages
  thunderbolt: Clear registers properly when auto clear isn't in use

Pull block fixes from Jens Axboe:

 - NVMe pull request via Keith:
     - More device quirks (Sagi, Hristo, Adrian, Daniel)
     - Controller delete race (Maurizo)
     - Multipath cleanup fix (Christoph)

 - Deny writeable mmap mapping on a readonly block device (Loic)

 - Kill unused define that got introduced by accident (Christoph)

 - Error handling fix for s390 dasd (Stefan)

 - ublk locking fix (Ming)

* tag 'block-6.4-2023-05-20' of git://git.kernel.dk/linux:
  block: remove NFL4_UFLG_MASK
  block: Deny writable memory mapping if block is read-only
  s390/dasd: fix command reject error on ESE devices
  nvme-pci: Add quirk for Teamgroup MP33 SSD
  ublk: fix AB-BA lockdep warning
  nvme: do not let the user delete a ctrl before a complete initialization
  nvme-multipath: don't call blk_mark_disk_dead in nvme_mpath_remove_disk
  nvme-pci: clamp max_hw_sectors based on DMA optimized limitation
  nvme-pci: add quirk for missing secondary temperature thresholds
  nvme-pci: add NVME_QUIRK_BOGUS_NID for HS-SSD-FUTURE 2048G

The NFL4_UFLG_MASK define slipped in in commit 9208d414
("block: add a ->get_unique_id method") and should never have been
added, as NFSD as the only user of it already has it's copy.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230520090010.527046-1-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

The syzbot fuzzer detected a problem in the udlfb driver, caused by an
endpoint not having the expected type:

usb 1-1: Read EDID byte 0 failed: -71
usb 1-1: Unable to get valid EDID from device/display
------------[ cut here ]------------
usb 1-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 0 PID: 9 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880
drivers/usb/core/urb.c:504
Modules linked in:
CPU: 0 PID: 9 Comm: kworker/0:1 Not tainted
6.4.0-rc1-syzkaller-00016-ga4422ff2 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google
04/28/2023
Workqueue: usb_hub_wq hub_event
RIP: 0010:usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504
...
Call Trace:
 <TASK>
 dlfb_submit_urb+0x92/0x180 drivers/video/fbdev/udlfb.c:1980
 dlfb_set_video_mode+0x21f0/0x2950 drivers/video/fbdev/udlfb.c:315
 dlfb_ops_set_par+0x2a7/0x8d0 drivers/video/fbdev/udlfb.c:1111
 dlfb_usb_probe+0x149a/0x2710 drivers/video/fbdev/udlfb.c:1743

The current approach for this issue failed to catch the problem
because it only checks for the existence of a bulk-OUT endpoint; it
doesn't check whether this endpoint is the one that the driver will
actually use.

We can fix the problem by instead checking that the endpoint used by
the driver does exist and is bulk-OUT.

Reported-and-tested-by: syzbot+0e22d63dcebb802b9bc8@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Pavel Skripkin <paskripkin@gmail.com>
Fixes: aaf7dbe0 ("video: fbdev: udlfb: properly check endpoint type")
Signed-off-by: Helge Deller <deller@gmx.de>

Just below the removed lines par->clk_wr_offset is hard coded to 3 so
there is no use in determining a different clock just to then ignore it
anyway. This also removes the only I/O port use remaining in the driver
allowing it to be built without CONFIG_HAS_IOPORT.

Link: https://lore.kernel.org/all/ZBx5aLo5h546BzBt@intel.com/Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Helge Deller <deller@gmx.de>

Building with W=1 shows that a header needs to be included to
make the prototypes visible:

drivers/video/fbdev/i810/i810_dvt.c:194:6: error: no previous prototype for 'round_off_xres' [-Werror=missing-prototypes]
drivers/video/fbdev/i810/i810_dvt.c:233:6: error: no previous prototype for 'i810fb_encode_registers' [-Werror=missing-prototypes]
drivers/video/fbdev/i810/i810_dvt.c:245:6: error: no previous prototype for 'i810fb_fill_var_timings' [-Werror=missing-prototypes]
drivers/video/fbdev/i810/i810_dvt.c:279:5: error: no previous prototype for 'i810_get_watermark' [-Werror=missing-prototypes]

Adding the header leads to another warning from a mismatched
prototype, so fix this as well:

drivers/video/fbdev/i810/i810_dvt.c:280:5: error: conflicting types for 'i810_get_watermark'; have 'u32(struct fb_var_screeninfo *,
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Helge Deller <deller@gmx.de>

There is a global function with this name on sparc, but no
global declaration:

drivers/video/fbdev/core/fbmem.c:1469:15: error: no previous prototype for 'get_fb_unmapped_area'

Make the generic definition static to avoid this warning. On
sparc, this is never seen.

Edit by Helge:
Update Kconfig text as suggested by Geert Uytterhoeven.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Helge Deller <deller@gmx.de>

User should not be able to write block device if it is read-only at
block level (e.g force_ro attribute). This is ensured in the regular
fops write operation (blkdev_write_iter) but not when writing via
user mapping (mmap), allowing user to actually write a read-only
block device via a PROT_WRITE mapping.

Example: This can lead to integrity issue of eMMC boot partition
(e.g mmcblk0boot0) which is read-only by default.

To fix this issue, simply deny shared writable mapping if the block
is readonly.

Note: Block remains writable if switch to read-only is performed
after the initial mapping, but this is expected behavior according
to commit a32e236e ("Partially revert "block: fail op_is_write()
requests to read-only partitions"")'.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230510074223.991297-1-loic.poulain@linaro.orgSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pull drm fixes from Dave Airlie:
 "Regular fixes pull, amdgpu and msm make up most of these, nothing too
  serious, also one i915 and one exynos.

  I didn't get a misc fixes pull this week (one of the maintainers is
  off, so have to engage the backup) so I think there are a few
  outstanding patches that will show up next week,

  amdgpu:
   - update gfx11 clock counter logic
   - Fix a race when disabling gfxoff on gfx10/11 for profiling
   - Raven/Raven2/PCO clock counter fix
   - Add missing get_vbios_fb_size for GMC 11
   - Fix a spurious irq warning in the device remove case
   - Fix possible power mode mismatch between driver and PMFW
   - USB4 fix

  exynos:
   - fix build warning

  i915:
   - fix missing NULL check in HDCP code

  msm:
   - display:
      - msm8998: fix fetch and qos to align with downstream
      - msm8998: fix LM pairs to align with downstream
      - remove unused INTF0 interrupt mask on some chipsets
      - remove TE2 block from relevant chipsets
      - relocate non-MDP_TOP offset to different header
      - fix some indentation
      - fix register offets/masks for dither blocks
      - make ping-ping block length 0
      - remove duplicated defines
      - fix log mask for writeback block
      - unregister the hdmi codec for dp during unbind
      - fix yaml warnings
   - gpu:
      - fix submit error path leak
      - arm-smmu-qcom fix for regression that broke per-process page
        tables
      - fix no-iommu crash"

* tag 'drm-fixes-2023-05-20' of git://anongit.freedesktop.org/drm/drm: (29 commits)
  drm/amd/display: enable dpia validate
  drm/amd/pm: fix possible power mode mismatch between driver and PMFW
  drm/amdgpu: skip disabling fence driver src_irqs when device is unplugged
  drm/amdgpu/gmc11: implement get_vbios_fb_size()
  drm/amdgpu: Differentiate between Raven2 and Raven/Picasso according to revision id
  drm/amdgpu/gfx11: Adjust gfxoff before powergating on gfx11 as well
  drm/amdgpu/gfx10: Disable gfxoff before disabling powergating.
  drm/amdgpu/gfx11: update gpu_clock_counter logic
  drm/msm: Be more shouty if per-process pgtables aren't working
  iommu/arm-smmu-qcom: Fix missing adreno_smmu's
  drm/i915/hdcp: Check if media_gt exists
  drm/exynos: fix g2d_open/close helper function definitions
  drm/msm: Fix submit error-path leaks
  drm/msm/iommu: Fix null pointer dereference in no-IOMMU case
  dt-bindings: display/msm: dsi-controller-main: Document qcom, master-dsi and qcom, sync-dual-dsi
  drm/msm/dpu: Remove duplicate register defines from INTF
  drm/msm/dpu: Set PINGPONG block length to zero for DPU >= 7.0.0
  drm/msm/dpu: Use V2 DITHER PINGPONG sub-block in SM8[34]50/SC8280XP
  drm/msm/dpu: Fix PP_BLK_DIPHER -> DITHER typo
  drm/msm/dpu: Reindent REV_7xxx interrupt masks with tabs
  ...

Formatting a thin-provisioned (ESE) device that is part of a PPRC copy
relation might fail with the following error:

dasd-eckd 0.0.f500: An error occurred in the DASD device driver, reason=09
[...]
24 Byte: 0 MSG 4, no MSGb to SYSOP

During format of an ESE disk the Release Allocated Space command is used.
A bit in the payload of the command is set that is not allowed to be set
for devices in a copy relation. This bit is set to allow the partial
release of an extent.

Check for the existence of a copy relation before setting the respective
bit.

Fixes: 91dc4a19 ("s390/dasd: Add new ioctl to release space")
Cc: stable@kernel.org # 5.3+
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20230519102340.3854819-2-sth@linux.ibm.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pull SCSI fixes from James Bottomley:
 "Six small fixes.

  Four in drivers and the two core changes should be read together as a
  correction to a prior iorequest_cnt fix that exposed us to a potential
  use after free"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: core: Decrease scsi_device's iorequest_cnt if dispatch failed
  scsi: Revert "scsi: core: Do not increase scsi_device's iorequest_cnt if dispatch failed"
  scsi: storvsc: Don't pass unused PFNs to Hyper-V host
  scsi: ufs: core: Fix MCQ nr_hw_queues
  scsi: ufs: core: Rename symbol sizeof_utp_transfer_cmd_desc()
  scsi: ufs: core: Fix MCQ tag calculation

Pull ceph fixes from Ilya Dryomov:
 "A workaround for a just discovered bug in MClientSnap encoding which
  goes back to 2017 (marked for stable) and a fixup to quieten a static
  checker"

* tag 'ceph-for-6.4-rc3' of https://github.com/ceph/ceph-client:
  ceph: force updating the msg pointer in non-split case
  ceph: silence smatch warning in reconnect_caps_cb()

Pull power management fixes from Rafael Wysocki:
 "These fix two issues in the cpupower utility and get rid of a spurious
  warning message printed to the kernel log by the ACPI cpufreq driver
  after recent changes.

  Specifics:

   - Get rid of a warning message printed by the ACPI cpufreq driver
     after recent changes in it when anohter CPU performance scaling
     driver is registered already when it starts (Petr Pavlu)

   - Make cpupower read TSC on each CPU right before reading MPERF so as
     to reduce the potential time difference between the TSC and MPERF
     accesses and improve the C0 percentage calculation (Wyes Karny)

   - Fix a possible file handle leak and clean up the code in the
     sysfs_get_enabled() function in cpupower (Hao Zeng)"

* tag 'pm-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: ACPI: Prevent a warning when another frequency driver is loaded
  cpupower: Make TSC read per CPU for Mperf monitor
  cpupower:Fix resource leaks in sysfs_get_enabled()

Pull ACPI fix from Rafael Wysocki:
 "Add an ACPI IRQ override quirk for LG UltraPC 17U70P so as to make the
  internal keyboard work on that machine (Rubén Gómez)"

* tag 'acpi-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: resource: Add IRQ override quirk for LG UltraPC 17U70P

Pull documentation fixes from Jonathan Corbet:
 "Four straightforward documentation fixes"

* tag 'docs-6.4-fixes' of git://git.lwn.net/linux:
  Documentation/filesystems: ramfs-rootfs-initramfs: use :Author:
  Documentation/filesystems: sharedsubtree: add section headings
  docs: quickly-build-trimmed-linux: various small fixes and improvements
  Documentation: use capitalization for chapters and acronyms

Pull s390 fixes from Alexander Gordeev:

 - Add check whether the required facilities are installed before using
   the s390-specific ChaCha20 implementation

 - Key blobs for s390 protected key interface IOCTLs commands
   PKEY_VERIFYKEY2 and PKEY_VERIFYKEY3 may contain clear key material.
   Zeroize copies of these keys in kernel memory after creating
   protected keys

 - Set CONFIG_INIT_STACK_NONE=y in defconfigs to avoid extra overhead of
   initializing all stack variables by default

 - Make sure that when a new channel-path is enabled all subchannels are
   evaluated: with and without any devices connected on it

 - When SMT thread CPUs are added to CPU topology masks the nr_cpu_ids
   limit is not checked and could be exceeded. Respect the nr_cpu_ids
   limit and avoid a warning when CONFIG_DEBUG_PER_CPU_MAPS is set

 - The pointer to IPL Parameter Information Block is stored in the
   absolute lowcore as a virtual address. Save it as the physical
   address for later use by dump tools

 - Fix a Queued Direct I/O (QDIO) problem on z/VM guests using QIOASSIST
   with dedicated (pass through) QDIO-based devices such as FCP, real
   OSA or HiperSockets

 - s390's struct statfs and struct statfs64 contain padding, which
   field-by-field copying does not set. Initialize the respective
   structures with zeros before filling them and copying to userspace

 - Grow s390 compat_statfs64, statfs and statfs64 structures f_spare
   array member to cover padding and simplify things

 - Remove obsolete SCHED_BOOK and SCHED_DRAWER configs

 - Remove unneeded S390_CCW_IOMMU and S390_AP_IOM configs

* tag 's390-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/iommu: get rid of S390_CCW_IOMMU and S390_AP_IOMMU
  s390/Kconfig: remove obsolete configs SCHED_{BOOK,DRAWER}
  s390/uapi: cover statfs padding by growing f_spare
  statfs: enforce statfs[64] structure initialization
  s390/qdio: fix do_sqbs() inline assembly constraint
  s390/ipl: fix IPIB virtual vs physical address confusion
  s390/topology: honour nr_cpu_ids when adding CPUs
  s390/cio: include subchannels without devices also for evaluation
  s390/defconfigs: set CONFIG_INIT_STACK_NONE=y
  s390/pkey: zeroize key blobs
  s390/crypto: use vector instructions only if available for ChaCha20

Pull arm64 fixes from Will Deacon:
 "A mixture of compiler/static checker resolutions and a couple of MTE
  fixes:

   - Avoid erroneously marking untagged pages with PG_mte_tagged

   - Always reset KASAN tags for destination page in copy_page()

   - Mark PMU header functions 'static inline'

   - Fix some sparse warnings due to missing casts"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: mte: Do not set PG_mte_tagged if tags were not initialized
  arm64: Also reset KASAN tag if page is not PG_mte_tagged
  arm64: perf: Mark all accessor functions inline
  ARM: perf: Mark all accessor functions inline
  arm64: vdso: Pass (void *) to virt_to_page()
  arm64/mm: mark private VM_FAULT_X defines as vm_fault_t

In kvm_vm_ioctl_create_vcpu(), add vcpu to vcpu_array iff it's safe to
access vcpu via kvm_get_vcpu() and kvm_for_each_vcpu(), i.e. when there's
no failure path requiring vcpu removal and destruction. Such order is
important because vcpu_array accessors may end up referencing vcpu at
vcpu_array[0] even before online_vcpus is set to 1.

When online_vcpus=0, any call to kvm_get_vcpu() goes through
array_index_nospec() and ends with an attempt to xa_load(vcpu_array, 0):

	int num_vcpus = atomic_read(&kvm->online_vcpus);
	i = array_index_nospec(i, num_vcpus);
	return xa_load(&kvm->vcpu_array, i);

Similarly, when online_vcpus=0, a kvm_for_each_vcpu() does not iterate over
an "empty" range, but actually [0, ULONG_MAX]:

	xa_for_each_range(&kvm->vcpu_array, idx, vcpup, 0, \
			  (atomic_read(&kvm->online_vcpus) - 1))

In both cases, such online_vcpus=0 edge case, even if leading to
unnecessary calls to XArray API, should not be an issue; requesting
unpopulated indexes/ranges is handled by xa_load() and xa_for_each_range().

However, this means that when the first vCPU is created and inserted in
vcpu_array *and* before online_vcpus is incremented, code calling
kvm_get_vcpu()/kvm_for_each_vcpu() already has access to that first vCPU.

This should not pose a problem assuming that once a vcpu is stored in
vcpu_array, it will remain there, but that's not the case:
kvm_vm_ioctl_create_vcpu() first inserts to vcpu_array, then requests a
file descriptor. If create_vcpu_fd() fails, newly inserted vcpu is removed
from the vcpu_array, then destroyed:

	vcpu->vcpu_idx = atomic_read(&kvm->online_vcpus);
	r = xa_insert(&kvm->vcpu_array, vcpu->vcpu_idx, vcpu, GFP_KERNEL_ACCOUNT);
	kvm_get_kvm(kvm);
	r = create_vcpu_fd(vcpu);
	if (r < 0) {
		xa_erase(&kvm->vcpu_array, vcpu->vcpu_idx);
		kvm_put_kvm_no_destroy(kvm);
		goto unlock_vcpu_destroy;
	}
	atomic_inc(&kvm->online_vcpus);

This results in a possible race condition when a reference to a vcpu is
acquired (via kvm_get_vcpu() or kvm_for_each_vcpu()) moments before said
vcpu is destroyed.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Message-Id: <20230510140410.1093987-2-mhal@rbox.co>
Cc: stable@vger.kernel.org
Fixes: c5b07754 ("KVM: Convert the kvm->vcpus array to a xarray", 2021-12-08)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Include a definition of WARN_ON_ONCE() before using it.

Fixes: bb1fcc70 ("KVM: nVMX: Allow L1 to use 5-level page walks for nested EPT")
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: Jacob Xu <jacobhxu@google.com>
[reworded commit message; changed <asm/bug.h> to <linux/bug.h>]
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220225012959.1554168-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Reject hardware enabling, i.e. VM creation, if a restart/shutdown has
been initiated to avoid re-enabling hardware between kvm_reboot() and
machine_{halt,power_off,restart}().  The restart case is especially
problematic (for x86) as enabling VMX (or clearing GIF in KVM_RUN on
SVM) blocks INIT, which results in the restart/reboot hanging as BIOS
is unable to wake and rendezvous with APs.

Note, this bug, and the original issue that motivated the addition of
kvm_reboot(), is effectively limited to a forced reboot, e.g. `reboot -f`.
In a "normal" reboot, userspace will gracefully teardown userspace before
triggering the kernel reboot (modulo bugs, errors, etc), i.e. any process
that might do ioctl(KVM_CREATE_VM) is long gone.

Fixes: 8e1c1815 ("KVM: VMX: Disable VMX when system shutdown")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Message-Id: <20230512233127.804012-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Use syscore_ops.shutdown to disable hardware virtualization during a
reboot instead of using the dedicated reboot_notifier so that KVM disables
virtualization _after_ system_state has been updated.  This will allow
fixing a race in KVM's handling of a forced reboot where KVM can end up
enabling hardware virtualization between kernel_restart_prepare() and
machine_restart().

Rename KVM's hook to match the syscore op to avoid any possible confusion
from wiring up a "reboot" helper to a "shutdown" hook (neither "shutdown
nor "reboot" is completely accurate as the hook handles both).

Opportunistically rewrite kvm_shutdown()'s comment to make it less VMX
specific, and to explain why kvm_rebooting exists.

Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: James Morse <james.morse@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Zenghui Yu <yuzenghui@huawei.com>
Cc: kvmarm@lists.linux.dev
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Atish Patra <atishp@atishpatra.org>
Cc: kvm-riscv@lists.infradead.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Message-Id: <20230512233127.804012-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pull sound fixes from Takashi Iwai:
 "A collection of small fixes that have been gathered since rc1:

   - Lots of small ASoC SOF Intel fixes

   - A couple of UAF and NULL-dereference fixes

   - Quirks and updates for HD-audio, USB-audio and ASoC AMD

   - A few minor build / sparse warning fixes

   - MAINTAINERS and DT updates"

* tag 'sound-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (38 commits)
  ALSA: hda: Add NVIDIA codec IDs a3 through a7 to patch table
  ALSA: oss: avoid missing-prototype warnings
  ALSA: cs46xx: mark snd_cs46xx_download_image as static
  ALSA: hda: Fix Oops by 9.1 surround channel names
  ASoC: SOF: topology: Fix tuples array allocation
  ASoC: SOF: Separate the tokens for input and output pin index
  MAINTAINERS: Remove self from Cirrus Codec drivers
  ASoC: cs35l56: Prevent unbalanced pm_runtime in dsp_work() on SoundWire
  ASoC: SOF: topology: Fix logic for copying tuples
  ASoC: SOF: pm: save io region state in case of errors in resume
  ASoC: MAINTAINERS: drop Krzysztof Kozlowski from Samsung audio
  ASoC: mediatek: mt8186: Fix use-after-free in driver remove path
  ASoC: SOF: ipc3-topology: Make sure that only one cmd is sent in dai_config
  ASoC: SOF: sof-client-probes: fix pm_runtime imbalance in error handling
  ASoC: SOF: pcm: fix pm_runtime imbalance in error handling
  ASoC: SOF: debug: conditionally bump runtime_pm counter on exceptions
  ASoC: SOF: Intel: hda-mlink: add helper to program SoundWire PCMSyCM registers
  ASoC: SOF: Intel: hda-mlink: initialize instance_offset member
  ASoC: SOF: Intel: hda-mlink: use 'ml_addr' parameter consistently
  ASoC: SOF: Intel: hda-mlink: fix base_ptr computation
  ...