- 12 Mar, 2020 40 commits
-
-
Michal Kubecek authored
Implement CHANNELS_GET request to get channel counts of a network device. These are traditionally available via ETHTOOL_GCHANNELS ioctl request. Omit attributes for channel types which are not supported by driver or device (zero reported for maximum). v2: (all suggested by Jakub Kicinski) - minor cleanup in channels_prepare_data() - more descriptive channels_reply_size() - omit attributes with zero max count Signed-off-by:
Michal Kubecek <mkubecek@suse.cz> Reviewed-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michal Kubecek authored
Send ETHTOOL_MSG_RINGS_NTF notification whenever ring sizes of a network device are modified using ETHTOOL_MSG_RINGS_SET netlink message or ETHTOOL_SRINGPARAM ioctl request. Signed-off-by:
-
Michal Kubecek authored
Implement RINGS_SET netlink request to set ring sizes of a network device. These are traditionally set with ETHTOOL_SRINGPARAM ioctl request. Like the ioctl implementation, the generic ethtool code checks if supplied values do not exceed driver defined limits; if they do, first offending attribute is reported using extack. v2: - fix netdev reference leak in error path (found by Jakub Kicinsky) Signed-off-by:
-
Michal Kubecek authored
Implement RINGS_GET request to get ring sizes of a network device. These are traditionally available via ETHTOOL_GRINGPARAM ioctl request. Omit attributes for ring types which are not supported by driver or device (zero reported for maximum). v2: (all suggested by Jakub Kicinski) - minor cleanup in rings_prepare_data() - more descriptive rings_reply_size() - omit attributes with zero max size Signed-off-by:
-
Michal Kubecek authored
Send ETHTOOL_MSG_PRIVFLAGS_NTF notification whenever private flags of a network device are modified using ETHTOOL_MSG_PRIVFLAGS_SET netlink message or ETHTOOL_SPFLAGS ioctl request. Signed-off-by:
-
Michal Kubecek authored
Implement PRIVFLAGS_SET netlink request to set private flags of a network device. These are traditionally set with ETHTOOL_SPFLAGS ioctl request. Signed-off-by:
-
Michal Kubecek authored
Implement PRIVFLAGS_GET request to get private flags for a network device. These are traditionally available via ETHTOOL_GPFLAGS ioctl request. Signed-off-by:
-
Michal Kubecek authored
Send ETHTOOL_MSG_FEATURES_NTF notification whenever network device features are modified using ETHTOOL_MSG_FEATURES_SET netlink message, ethtool ioctl request or any other way resulting in call to netdev_update_features() or netdev_change_features() Signed-off-by:
-
Michal Kubecek authored
Implement FEATURES_SET netlink request to set network device features. These are traditionally set using ETHTOOL_SFEATURES ioctl request. Actual change is subject to netdev_change_features() sanity checks so that it can differ from what was requested. Unlike with most other SET requests, in addition to error code and optional extack, kernel provides an optional reply message (ETHTOOL_MSG_FEATURES_SET_REPLY) in the same format but with different semantics: information about difference between user request and actual result and difference between old and new state of dev->features. This reply message can be suppressed by setting ETHTOOL_FLAG_OMIT_REPLY flag in request header. Signed-off-by:
-
Michal Kubecek authored
Unlike other SET type commands, modifying netdev features is required to provide a reply telling userspace what was actually changed, compared to what was requested. For that purpose, the "modified" flag provided by ethnl_update_bitset() is not sufficient, we need full information which bits were requested to change. Therefore provide ethnl_parse_bitset() returning effective value and mask bitmaps equivalent to the contents of a bitset nested attribute. v2: use non-atomic __set_bit() (suggested by David Miller) Signed-off-by:
-
Michal Kubecek authored
Implement FEATURES_GET request to get network device features. These are traditionally available via ETHTOOL_GFEATURES ioctl request. v2: - style cleanup suggested by Jakub Kicinski Signed-off-by:
-
Michal Kubecek authored
Legacy ioctl request like ETHTOOL_GTXCSUM are still used by ethtool utility to get values of legacy flags (which rather work as feature groups). These are calculated from values of actual features and request to set them is implemented as an attempt to set all features mapping to them but there are two inconsistencies: - tx-checksum-fcoe-crc is shown under tx-checksumming but NETIF_F_FCOE_CRC is not included in ETHTOOL_GTXCSUM/ETHTOOL_STXCSUM - tx-scatter-gather-fraglist is shown under scatter-gather but NETIF_F_FRAGLIST is not included in ETHTOOL_GSG/ETHTOOL_SSG As the mapping in ethtool output is more correct from logical point of view, fix ethtool_get_feature_mask() to match it. Signed-off-by:
-
Michal Kubecek authored
Andrew Lunn pointed out that even if it's documented that ethnl_parse_header() takes reference to network device if it fills it into the target structure, its name doesn't make it apparent so that corresponding dev_put() looks like mismatched. Rename the function ethnl_parse_header_dev_get() to indicate that it takes a reference. Suggested-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
David S. Miller authored
Paul Blakey says: ==================== Introduce connection tracking offload Background ---------- The connection tracking action provides the ability to associate connection state to a packet. The connection state may be used for stateful packet processing such as stateful firewalls and NAT operations. Connection tracking in TC SW ---------------------------- The CT state may be matched only after the CT action is performed. As such, CT use cases are commonly implemented using multiple chains. Consider the following TC filters, as an example: 1. tc filter add dev ens1f0_0 ingress prio 1 chain 0 proto ip flower \ src_mac 24:8a:07:a5:28:01 ct_state -trk \ action ct \ pipe action goto chain 2 2. tc filter add dev ens1f0_0 ingress prio 1 chain 2 proto ip flower \ ct_state +trk+new \ action ct commit \ pipe action tunnel_key set \ src_ip 0.0.0.0 \ dst_ip 7.7.7.8 \ id 98 \ dst_port 4789 \ action mirred egress redirect dev vxlan0 3. tc filter add dev ens1f0_0 ingress prio 1 chain 2 proto ip flower \ ct_state +trk+est \ action tunnel_key set \ src_ip 0.0.0.0 \ dst_ip 7.7.7.8 \ id 98 \ dst_port 4789 \ action mirred egress redirect dev vxlan0 Filter #1 (chain 0) decides, after initial packet classification, to send the packet to the connection tracking module (ct action). Once the ct_state is initialized by the CT action the packet processing continues on chain 2. Chain 2 classifies the packet based on the ct_state. Filter #2 matches on the +trk+new CT state while filter #3 matches on the +trk+est ct_state. MLX5 Connection tracking HW offload - MLX5 driver patches ------------------------------ The MLX5 hardware model aligns with the software model by realizing a multi-table architecture. In SW the TC CT action sets the CT state on the skb. Similarly, HW sets the CT state on a HW register. Driver gets this CT state while offloading a tuple with a new ct_metadata action that provides it. Matches on ct_state are translated to HW register matches. TC filter with CT action broken to two rules, a pre_ct rule, and a post_ct rule. pre_ct rule: Inserted on the corrosponding tc chain table, matches on original tc match, with actions: any pre ct actions, set fte_id, set zone, and goto the ct table. The fte_id is a register mapping uniquely identifying this filter. post_ct_rule: Inserted in a post_ct table, matches on the fte_id register mapping, with actions: counter + any post ct actions (this is usally 'goto chain X') post_ct table is a table that all the tuples inserted to the ct table goto, so if there is a tuple hit, packet will continue from ct table to post_ct table, after being marked with the CT state (mark/label..) This design ensures that the rule's actions and counters will be executed only after a CT hit. HW misses will continue processing in SW from the last chain ID that was processed in hardware. The following illustrates the HW model: +-------------------+ +--------------------+ +--------------+ + pre_ct (tc chain) +----->+ CT (nat or no nat) +--->+ post_ct +-----> + original match + | + tuple + zone match + | + fte_id match + | +-------------------+ | +--------------------+ | +--------------+ | v v v set chain miss mapping set mark original set fte_id set label filter set zone set established actions set tunnel_id do nat (if needed) do decap To fill CT table, driver registers a CB for flow offload events, for each new flow table that is passed to it from offloading ct actions. Once a flow offload event is triggered on this CB, offload this flow to the hardware CT table. Established events offload -------------------------- Currently, act_ct maintains an FT instance per ct zone. Flow table entries are created, per ct connection, when connections enter an established state and deleted otherwise. Once an entry is created, the FT assumes ownership of the entries, and manages their aging. FT is used for software offload of conntrack. FT entries associate 5-tuples with an action list. The act_ct changes in this patchset: Populate the action list with a (new) ct_metadata action, providing the connection's ct state (zone,mark and label), and mangle actions if NAT is configured. Pass the action's flow table instance as ct action entry parameter, so when the action is offloaded, the driver may register a callback on it's block to receive FT flow offload add/del/stats events. Netilter changes -------------------------- The netfilter changes export the relevant bits, and add the relevant CBs to support the above. Applying this patchset -------------------------- On top of current net-next ("r8169: simplify getting stats by using netdev_stats_to_stats64"), pull Saeed's ct-offload branch, from git git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux.git and fix the following non trivial conflict in fs_core.c as follows: Then apply this patchset. Changelog: v2->v3: Added the first two patches needed after rebasing on net-next: "net/mlx5: E-Switch, Enable reg c1 loopback when possible" "net/mlx5e: en_rep: Create uplink rep root table after eswitch offloads table" ==================== Signed-off-by: -
Paul Blakey authored
Clear action, as with software, removes all ct metadata from the packet. Signed-off-by:
Paul Blakey <paulb@mellanox.com> Reviewed-by:
Oz Shlomo <ozsh@mellanox.com> Signed-off-by:
-
Paul Blakey authored
Mark packets with a unique tupleid, and on miss use that id to get the act ct restore_cookie. Using that restore cookie, we ask CT to restore the relevant info on the SKB. Signed-off-by:
Roi Dayan <roid@mellanox.com> Signed-off-by:
-
Paul Blakey authored
Register driver callbacks with the nf flow table platform. FT add/delete events will create/delete FTE in the CT/CT_NAT tables. Restoring the CT state on miss will be added in the following patch. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Paul Blakey authored
Add support for offloading tc ct action and ct matches. We translate the tc filter with CT action the following HW model: +-------------------+ +--------------------+ +--------------+ + pre_ct (tc chain) +----->+ CT (nat or no nat) +--->+ post_ct +-----> + original match + | + tuple + zone match + | + fte_id match + | +-------------------+ | +--------------------+ | +--------------+ | v v v set chain miss mapping set mark original set fte_id set label filter set zone set established actions set tunnel_id do nat (if needed) do decap Signed-off-by: -
Paul Blakey authored
Add relevant getter for ct info dissector. Signed-off-by:
-
Paul Blakey authored
Currently, we write chain register mapping on miss from the the last prio of a chain. It is used to restore the chain in software. To support re-using the chain register mapping from global tables (such as CT tuple table) misses, export the chain mapping. Signed-off-by:
-
Paul Blakey authored
FTEs in global tables may match on packets from multiple in_ports. Provide the capability to omit the in_port match condition. Signed-off-by:
-
Paul Blakey authored
Currently, flow tables are automatically connected according to their <chain,prio,level> tuple. Introduce global tables which are flow tables that are detached from the eswitch chains processing, and will be connected by explicitly referencing them from multiple chains. Add this new table type, and allow connecting them by refenece. Signed-off-by:
-
Paul Blakey authored
Pass the zone's flow table instance on the flow action to the drivers. Thus, allowing drivers to register FT add/del/stats callbacks. Finally, enable hardware offload on the flow table instance. Signed-off-by:
-
Paul Blakey authored
If driver deleted an FT entry, a FT failed to offload, or registered to the flow table after flows were already added, we still get packets in software. For those packets, while restoring the ct state from the flow table entry, refresh it's hardware offload. Signed-off-by:
-
Paul Blakey authored
Provide an API to restore the ct state pointer. This may be used by drivers to restore the ct state if they miss in tc chain after they already did the hardware connection tracking action (ct_metadata action). For example, consider the following rule on chain 0 that is in_hw, however chain 1 is not_in_hw: $ tc filter add dev ... chain 0 ... \ flower ... action ct pipe action goto chain 1 Packets of a flow offloaded (via nf flow table offload) by the driver hit this rule in hardware, will be marked with the ct metadata action (mark, label, zone) that does the equivalent of the software ct action, and when the packet jumps to hardware chain 1, there would be a miss. CT was already processed in hardware. Therefore, the driver's miss handling should restore the ct state on the skb, using the provided API, and continue the packet processing in chain 1. Signed-off-by:
-
Paul Blakey authored
NF flow table API associate 5-tuple rule with an action list by calling the flow table type action() CB to fill the rule's actions. In action CB of act_ct, populate the ct offload entry actions with a new ct_metadata action. Initialize the ct_metadata with the ct mark, label and zone information. If ct nat was performed, then also append the relevant packet mangle actions (e.g. ipv4/ipv6/tcp/udp header rewrites). Drivers that offload the ft entries may match on the 5-tuple and perform the action list. Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
-
Paul Blakey authored
Let drivers to add their cb allowing them to receive flow offload events of type TC_SETUP_CLSFLOWER (REPLACE/DEL/STATS) for flows managed by the flow table. Signed-off-by:
-
Paul Blakey authored
The eswitch offloads table, which has the reps (vport) rx miss rules, was moved from OFFLOADS namespace [0,0] (prio, level), to [1,0], so the restore table (the new [0,0]) can come before it. The destinations of these miss rules is the rep root ft (ttc for non uplink reps). Uplink rep root ft is created as OFFLOADS namespace [0,1], and is used as a hook to next RX prio (either ethtool or ttc), but this fails to pass fs_core level's check. Move uplink rep root ft to OFFLOADS prio 1, level 1 ([1,1]), so it will keep the same relative position after the restore table change. Signed-off-by:
-
Paul Blakey authored
Enable reg c1 loopback if firmware reports it's supported, as this is needed for restoring packet metadata (e.g chain). Also define helper to query if it is enabled. Signed-off-by:
-
-
David S. Miller authored
Kuniyuki Iwashima says: ==================== Improve bind(addr, 0) behaviour. Currently we fail to bind sockets to ephemeral ports when all of the ports are exhausted even if all sockets have SO_REUSEADDR enabled. In this case, we still have a chance to connect to the different remote hosts. These patches add net.ipv4.ip_autobind_reuse option and fix the behaviour to fully utilize all space of the local (addr, port) tuples. Changes in v5: - Add more description to documents. - Fix sysctl option to use proc_dointvec_minmax. - Remove the Fixes: tag and squash two commits. Changes in v4: - Add net.ipv4.ip_autobind_reuse option to not change the current behaviour. - Modify .gitignore for test. https://lore.kernel.org/netdev/20200308181615.90135-1-kuniyu@amazon.co.jp/ Changes in v3: - Change the title and write more specific description of the 3rd patch. - Add a test in tools/testing/selftests/net/ as the 4th patch. https://lore.kernel.org/netdev/20200229113554.78338-1-kuniyu@amazon.co.jp/ Changes in v2: - Change the description of the 2nd patch ('localhost' -> 'address'). - Correct the description and the if statement of the 3rd patch. https://lore.kernel.org/netdev/20200226074631.67688-1-kuniyu@amazon.co.jp/ v1 with tests: https://lore.kernel.org/netdev/20200220152020.13056-1-kuniyu@amazon.co.jp/ ==================== Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Kuniyuki Iwashima authored
This commit adds a test to check if we can fully utilize 4-tuples for connect() when all ephemeral ports are exhausted. The test program changes the local port range to use only one port and binds two sockets with or without SO_REUSEADDR and SO_REUSEPORT, and with the same EUID or with different EUIDs, then do listen(). We should be able to bind only one socket having both SO_REUSEADDR and SO_REUSEPORT per EUID, which restriction is to prevent unintentional listen(). Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by:
-
Kuniyuki Iwashima authored
If there is no TCP_LISTEN socket on a ephemeral port, we can bind multiple sockets having SO_REUSEADDR to the same port. Then if all sockets bound to the port have also SO_REUSEPORT enabled and have the same EUID, all of them can be listened. This is not safe. Let's say, an application has root privilege and binds sockets to an ephemeral port with both of SO_REUSEADDR and SO_REUSEPORT. When none of sockets is not listened yet, a malicious user can use sudo, exhaust ephemeral ports, and bind sockets to the same ephemeral port, so he or she can call listen and steal the port. To prevent this issue, we must not bind more than one sockets that have the same EUID and both of SO_REUSEADDR and SO_REUSEPORT. On the other hand, if the sockets have different EUIDs, the issue above does not occur. After sockets with different EUIDs are bound to the same port and one of them is listened, no more socket can be listened. This is because the condition below is evaluated true and listen() for the second socket fails. } else if (!reuseport_ok || !reuseport || !sk2->sk_reuseport || rcu_access_pointer(sk->sk_reuseport_cb) || (sk2->sk_state != TCP_TIME_WAIT && !uid_eq(uid, sock_i_uid(sk2)))) { if (inet_rcv_saddr_equal(sk, sk2, true)) break; } Therefore, on the same port, we cannot do listen() for multiple sockets with different EUIDs and any other listen syscalls fail, so the problem does not happen. In this case, we can still call connect() for other sockets that cannot be listened, so we have to succeed to call bind() in order to fully utilize 4-tuples. Summarizing the above, we should be able to bind only one socket having SO_REUSEADDR and SO_REUSEPORT per EUID. Signed-off-by: -
Kuniyuki Iwashima authored
Commit aacd9289 ("tcp: bind() use stronger condition for bind_conflict") introduced a restriction to forbid to bind SO_REUSEADDR enabled sockets to the same (addr, port) tuple in order to assign ports dispersedly so that we can connect to the same remote host. The change results in accelerating port depletion so that we fail to bind sockets to the same local port even if we want to connect to the different remote hosts. You can reproduce this issue by following instructions below. 1. # sysctl -w net.ipv4.ip_local_port_range="32768 32768" 2. set SO_REUSEADDR to two sockets. 3. bind two sockets to (localhost, 0) and the latter fails. Therefore, when ephemeral ports are exhausted, bind(0) should fallback to the legacy behaviour to enable the SO_REUSEADDR option and make it possible to connect to different remote (addr, port) tuples. This patch allows us to bind SO_REUSEADDR enabled sockets to the same (addr, port) only when net.ipv4.ip_autobind_reuse is set 1 and all ephemeral ports are exhausted. This also allows connect() and listen() to share ports in the following way and may break some applications. So the ip_autobind_reuse is 0 by default and disables the feature. 1. setsockopt(sk1, SO_REUSEADDR) 2. setsockopt(sk2, SO_REUSEADDR) 3. bind(sk1, saddr, 0) 4. bind(sk2, saddr, 0) 5. connect(sk1, daddr) 6. listen(sk2) If it is set 1, we can fully utilize the 4-tuples, but we should use IP_BIND_ADDRESS_NO_PORT for bind()+connect() as possible. The notable thing is that if all sockets bound to the same port have both SO_REUSEADDR and SO_REUSEPORT enabled, we can bind sockets to an ephemeral port and also do listen(). Signed-off-by:
-
Kuniyuki Iwashima authored
When we get an ephemeral port, the relax is false, so the SO_REUSEADDR conditions may be evaluated twice. We do not need to check the conditions again. Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== ethtool: consolidate irq coalescing - part 4 Convert more drivers following the groundwork laid in a recent patch set [1] and continued in [2], [3]. The aim of the effort is to consolidate irq coalescing parameter validation in the core. This set converts 15 drivers in drivers/net/ethernet - remaining Intel drivers, Freescale/NXP, and others. 2 more conversion sets to come. [1] https://lore.kernel.org/netdev/20200305051542.991898-1-kuba@kernel.org/ [2] https://lore.kernel.org/netdev/20200306010602.1620354-1-kuba@kernel.org/ [3] https://lore.kernel.org/netdev/20200310021512.1861626-1-kuba@kernel.org/ ==================== Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver was rejecting almost all unsupported parameters already, it was only missing a check for tx_max_coalesced_frames_irq. As a side effect of these changes the error code for unsupported params changes from ENOTSUPP to EOPNOTSUPP. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
