- 25 Jun, 2019 7 commits
-
-
Chris Wilson authored
Switch from passing the i915 container to newly named struct intel_gt. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190625130128.11009-2-chris@chris-wilson.co.uk
-
Robert M. Fosha authored
Detect GuC firmware load failure due to an exception during execution in GuC firmware. Output the GuC EIP where exception occurred to dmesg for GuC debug information. v2: correct typos, change debug message and error code returned for GuC exception (Michal) Signed-off-by:
Robert M. Fosha <robert.m.fosha@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by:
-
Chris Wilson authored
As this engine owns the lock around rq->sched.link (for those waiters submitted to this engine), we can use that link as an element in a local list. We can thus replace the recursive algorithm with an iterative walk over the ordered list of waiters. Signed-off-by:
-
José Roberto de Souza authored
EHL can have up to one VECS(video enhancement) engine, so add it to the device_info. BSpec: 29152 Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Bob Paauwe <bob.j.paauwe@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Clint Taylor <Clinton.A.Taylor@intel.com> Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190614213749.15870-1-jose.souza@intel.com
-
Matt Roper authored
There's one additional ID that we should treat as Mule Creek Canyon. Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
-
Lionel Landwerlin authored
We got the wrong offsets (could they have changed?). New values were computed off an error state by looking up the register offset in the context image as written by the HW. Signed-off-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Fixes: 1de401c0 ("drm/i915/perf: enable perf support on ICL") Acked-by:
Kenneth Graunke <kenneth@whitecape.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190610081914.25428-1-lionel.g.landwerlin@intel.com
-
Kenneth Graunke authored
The Demand Prefetch workaround (binding table prefetching) only applies to Icelake A0/B0. But the Sampler Prefetch workaround needs to be applied to all Gen11 steppings, according to a programming note in the SARCHKMD documentation. Using the Intel Gallium driver, I have seen intermittent failures in the dEQP-GLES31.functional.copy_image.non_compressed.* tests. After applying this workaround, the tests reliably pass. v2: Remove the overlap with a pre-production w/a BSpec: 9663 Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190625090655.19220-1-chris@chris-wilson.co.uk
-
- 24 Jun, 2019 2 commits
-
-
Chris Wilson authored
Update the domains for the write via the GPU so that we do not shortcircuit any set-domain clflush afterwards. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110978 Fixes: b2dbf8d9 ("drm/i915/blt: Remove recursive vma->lock") Signed-off-by:
-
Chris Wilson authored
In the unlikely case (thank you CI!), we may find ourselves wanting to issue a preemption but having no runnable requests left. In this case, we set the semaphore before computing the preemption and so must unset it before forgetting (or else we leave the machine busywaiting until the next request comes along and so likely hang). v2: Replace readback with only a wmb after asserting the semaphore Signed-off-by:
-
- 21 Jun, 2019 31 commits
-
-
Chris Wilson authored
As we have already plugged the w->dma into the reservation_object, and have set ourselves up to automatically signal the request and w->dma on completion, we do not need to export the rq->fence directly and just use the w->dma fence. This avoids having to take the reservation_lock inside the worker which cross-release lockdep would complain about. :) Signed-off-by:
-
Chris Wilson authored
Avoid pulling in i915_gem.h just so that we can use a conditional BUG_ON for debugging. Signed-off-by:
-
Chris Wilson authored
If we introduce a callback for i915_active that is only called the first time we use the i915_active and is symmetrically paired with the i915_active.retire callback, we can replace the open-coded and non-atomic implementations -- which will be very fragile (i.e. broken) upon removing the struct_mutex serialisation. Signed-off-by:
-
Chris Wilson authored
Remove the accumulated optimisations that we have for i915_vma_retire and reduce it to the bare essential of tracking the active object reference. This allows us to only use atomic operations, and so will be able to avoid the struct_mutex requirement. The principal loss here is the shrinker MRU bumping, so now if we have to shrink, we will do so in much more random order and more likely to try and shrink recently used objects. That is a nuisance, but shrinking active objects is a second step we try to avoid and will always be a system-wide performance issue. The other loss is here is in the automatic pruning of the reservation_object when idling. This is not as large an issue as upon reservation_object introduction as now adding new fences into the object replaces already signaled fences, keeping the array compact. But we do lose the auto-expiration of stale fences and unused arrays. That may be a noticeable problem for which we need to re-implement autopruning. Signed-off-by:
-
Chris Wilson authored
Provide runtime asserts and tracking of i915_active via debugobjects. For example, this should allow us to check that the i915_active is only active when we expect it to be and is never freed too early. One consequence is that, for simplicity, we no longer allow i915_active to be on-stack which only affected the selftests. Signed-off-by:
-
Chris Wilson authored
i915_gem_wait_for_idle() and i915_retire_requests() introduce a dependency on the timeline->mutex. This is problematic as we want to later perform allocations underneath i915_active.mutex, forming a link between the shrinker, the timeline and active mutexes. Nip this cycle in the bud by removing the acquisition of the timeline mutex (i.e. retiring) from inside the shrinker. Signed-off-by:
-
Daniele Ceraolo Spurio authored
There is a very small chance of triggering a log flush event when enabling or disabling CT buffers. Events triggered while CT buffers are disabled are logged in the SCRATCH_15 register using the same bits used in the CT message payload. Since our communication channel with GuC is turned off, we can save the message and handle it after we turn it back on. GuC should be idle and not generate more events in the meantime because we're not talking to it. v2: clear the mmio register on stop_communication as well (Chris) Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Daniele Ceraolo Spurio authored
Make sure we always have CT buffers enabled when the interrupts are enabled, so we can always handle interrupts from GuC. Also move the setting of the guc->send and guc->handler functions to the GuC communication control functions for consistency. The reorder also fixes the onion unwinding of intel_uc_init_hw, because guc_enable_communication would've left interrupts enabled when failing to enable CTB. v2: always retunr the result of ctch_enable() in intel_guc_ct_enable() (Michal) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110943Signed-off-by:Matthew Brost <matthew.brost@intel.com> Reviewed-by:
-
Chris Wilson authored
drivers/gpu/drm/i915/gt/intel_mocs.c:513: warning: Function parameter or member 'gt' not described in 'intel_mocs_init_l3cc_table' drivers/gpu/drm/i915/gt/intel_mocs.c:513: warning: Excess function parameter 'dev_priv' description in 'intel_mocs_init_l3cc_table' intel_vgt_balloon/deballoon, i915_ggtt_probe_hw intel_wopcm_init_hw need similar treatment Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190621131640.28864-2-chris@chris-wilson.co.uk
-
Chris Wilson authored
Since the anonymous i915_gt became struct intel_gt and encloses struct i915_gt_timelines, rename i915_gt_timelines to intel_gt_timelines to match its parentage. Signed-off-by:
-
Chris Wilson authored
smatch caught, drivers/gpu/drm/i915/i915_gpu_error.c:1418 gem_record_rings() warn: variable dereferenced before check 'engine' (see line 1413) Signed-off-by:
-
Tvrtko Ursulin authored
Scratch vma lives under gt but the API used to work on i915. Make this consistent by renaming the function to intel_gt_scratch_offset and make it take struct intel_gt. v2: * Move to intel_gt. (Chris) Signed-off-by:
-
Tvrtko Ursulin authored
Move all timeline code under gt and rename to intel_gt prefix. Signed-off-by:
-
Tvrtko Ursulin authored
Our timelines are stored inside intel_gt so we can convert the interface to take exactly that and not i915. At the same time re-order the params to our more typical layout and replace the backpointer to the new containing structure. Signed-off-by:
-
Tvrtko Ursulin authored
For gt related operations it makes more logical sense to stay in the realm of gt instead of dereferencing via driver i915. This patch handles a few of the easy ones with work requiring more refactoring still outstanding. Signed-off-by:
-
Tvrtko Ursulin authored
Continuing on the theme of compartmentalizing the code better to make future split between gt and display in global i915 clearer. v2: * Pass in ggtt instead of gt. (Chris) Signed-off-by:
-
Tvrtko Ursulin authored
This will become useful in the following patch. v2: * Assign the pointer through a helper on the top level to work around the layering violation. (Chris) v3: * Handle selftests. v4: * Move call to intel_gt_init_hw into mock_init_ggtt. (Chris) Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
-
Tvrtko Ursulin authored
Continuing on the theme of better logical organization of our code, make the first step towards making the ggtt code better isolated from wider struct drm_i915_private. v2: * Bring the ickle onion unwind back. (Chris) * Rename to i915_init_ggtt. (Chris) Signed-off-by:
-
Tvrtko Ursulin authored
Continuing on the theme of better logical organization of our code, make the first step towards making the ggtt code better isolated from wider struct drm_i915_private. v2: * Cleanup of mm.wc_stash does not need struct_mutex. (Chris) Signed-off-by:
-
Tvrtko Ursulin authored
Continuing on the theme of better logical organization of our code, make the first step towards making the timeline code better isolated from wider struct drm_i915_private. Signed-off-by:
-
Tvrtko Ursulin authored
This aligns better with the rest of restructuring. v2: * Move call out of line. (Chris) Signed-off-by:
-
Tvrtko Ursulin authored
Having introduced struct intel_gt (named the anonymous structure in i915) we can start using it to compartmentalize our code better. It makes more sense logically to have the code internally like this and it will also help with future split between gt and display in i915. v2: * Keep ggtt flush before fb obj flush. (Chris) v3: * Fix refactoring fail. * Always flush ggtt writes. (Chris) Signed-off-by:
-
Tvrtko Ursulin authored
Having made start to better code compartmentalization by introducing struct intel_gt, continue the theme elsewhere in code by making functions take parameters take what logically makes most sense for them instead of the global struct drm_i915_private. Signed-off-by:
-
Tvrtko Ursulin authored
This will come useful in the following patch. v2: * Handle mock ggtt. Signed-off-by:
-
Tvrtko Ursulin authored
It is more logical for ggtt invalidation to take ggtt as input parameter. Signed-off-by:
-
Tvrtko Ursulin authored
Having made start to better code compartmentalization by introducing struct intel_gt, continue the theme elsewhere in code by making functions take parameters take what logically makes most sense for them instead of the global struct drm_i915_private. Signed-off-by:
-
Tvrtko Ursulin authored
Having made start to better code compartmentalization by introducing struct intel_gt, continue the theme elsewhere in code by making functions take parameters take what logically makes most sense for them instead of the global struct drm_i915_private. Signed-off-by:
-
Tvrtko Ursulin authored
More legacy mmio accessor removal. We pass in intel_gt explicitly allowing code to use new intel_uncore_read/write helpers. Signed-off-by:
-
Tvrtko Ursulin authored
Since this part still operates on i915 and not intel_gt, move it to the common (top-level) function. Signed-off-by:
-
Tvrtko Ursulin authored
More removal of implicit dev_priv from using old mmio accessors. Actually the top level function remains but is split into a part which writes to i915 and part which operates on intel_gt in order to initialize the hardware. GuC and engines are the only odd ones out remaining. Signed-off-by:
-
Tvrtko Ursulin authored
Replace some gen6/7 open coded rmw with intel_uncore_rmw. Signed-off-by:
-
