commit 2836766a upstream.

Sleep in atomic context happened on Trats2 board after inserting or
removing SD card because mmc_gpio_get_cd() was called under spin lock.

Fix this by moving card detection earlier, before acquiring spin lock.
The mmc_gpio_get_cd() call does not have to be protected by spin lock
because it does not access any sdhci internal data.
The sdhci_do_get_cd() call access host flags (SDHCI_DEVICE_DEAD). After
moving it out side of spin lock it could theoretically race with driver
removal but still there is no actual protection against manual card
eject.

Dmesg after inserting SD card:
[   41.663414] BUG: sleeping function called from invalid context at drivers/gpio/gpiolib.c:1511
[   41.670469] in_atomic(): 1, irqs_disabled(): 128, pid: 30, name: kworker/u8:1
[   41.677580] INFO: lockdep is turned off.
[   41.681486] irq event stamp: 61972
[   41.684872] hardirqs last  enabled at (61971): [<c0490ee0>] _raw_spin_unlock_irq+0x24/0x5c
[   41.693118] hardirqs last disabled at (61972): [<c04907ac>] _raw_spin_lock_irq+0x18/0x54
[   41.701190] softirqs last  enabled at (61648): [<c0026fd4>] __do_softirq+0x234/0x2c8
[   41.708914] softirqs last disabled at (61631): [<c00273a0>] irq_exit+0xd0/0x114
[   41.716206] Preemption disabled at:[<  (null)>]   (null)
[   41.721500]
[   41.722985] CPU: 3 PID: 30 Comm: kworker/u8:1 Tainted: G        W      3.18.0-rc5-next-20141121 #883
[   41.732111] Workqueue: kmmcd mmc_rescan
[   41.735945] [<c0014d2c>] (unwind_backtrace) from [<c0011c80>] (show_stack+0x10/0x14)
[   41.743661] [<c0011c80>] (show_stack) from [<c0489d14>] (dump_stack+0x70/0xbc)
[   41.750867] [<c0489d14>] (dump_stack) from [<c0228b74>] (gpiod_get_raw_value_cansleep+0x18/0x30)
[   41.759628] [<c0228b74>] (gpiod_get_raw_value_cansleep) from [<c03646e8>] (mmc_gpio_get_cd+0x38/0x58)
[   41.768821] [<c03646e8>] (mmc_gpio_get_cd) from [<c036d378>] (sdhci_request+0x50/0x1a4)
[   41.776808] [<c036d378>] (sdhci_request) from [<c0357934>] (mmc_start_request+0x138/0x268)
[   41.785051] [<c0357934>] (mmc_start_request) from [<c0357cc8>] (mmc_wait_for_req+0x58/0x1a0)
[   41.793469] [<c0357cc8>] (mmc_wait_for_req) from [<c0357e68>] (mmc_wait_for_cmd+0x58/0x78)
[   41.801714] [<c0357e68>] (mmc_wait_for_cmd) from [<c0361c00>] (mmc_io_rw_direct_host+0x98/0x124)
[   41.810480] [<c0361c00>] (mmc_io_rw_direct_host) from [<c03620f8>] (sdio_reset+0x2c/0x64)
[   41.818641] [<c03620f8>] (sdio_reset) from [<c035a3d8>] (mmc_rescan+0x254/0x2e4)
[   41.826028] [<c035a3d8>] (mmc_rescan) from [<c003a0e0>] (process_one_work+0x180/0x3f4)
[   41.833920] [<c003a0e0>] (process_one_work) from [<c003a3bc>] (worker_thread+0x34/0x4b0)
[   41.841991] [<c003a3bc>] (worker_thread) from [<c003fed8>] (kthread+0xe4/0x104)
[   41.849285] [<c003fed8>] (kthread) from [<c000f268>] (ret_from_fork+0x14/0x2c)
[   42.038276] mmc0: new high speed SDHC card at address 1234
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Fixes: 94144a46 ("mmc: sdhci: add get_cd() implementation")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 4302a596 upstream.

When used via spidev with more than one messages to tranfer via
SPI_IOC_MESSAGE the current implementation would return with
-EINVAL, since bits_per_word and speed_hz are set in all
transfer structs. And in the 2nd loop status will stay at
-EINVAL as its not overwritten again via fsl_spi_setup_transfer().

This patch changes this behavious by first checking if one of
the messages uses different settings. If this is the case
the function will return with -EINVAL. If not, the messages
are transferred correctly.
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Cc: Esben Haabendal <esbenhaabendal@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit f61ff6c0 upstream.

Linus reported perf report command being interrupted due to processing
of 'out of order' event, with following error:

  Timestamp below last timeslice flush
  0x5733a8 [0x28]: failed to process type: 3

I could reproduce the issue and in my case it was caused by one CPU
(mmap) being behind during record and userspace mmap reader seeing the
data after other CPUs data were already stored.

This is expected under some circumstances because we need to limit the
number of events that we queue for reordering when we receive a
PERF_RECORD_FINISHED_ROUND or when we force flush due to memory
pressure.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1417016371-30249-1-git-send-email-jolsa@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
[zhangzhiqiang: backport to 3.10:
 - adjust context
 - commit f61ff6c0 struct events_stats was defined in tools/perf/util/event.h
   while 3.10 stable defined in tools/perf/util/hist.h.
 - 3.10 stable there is no pr_oe_time() which used for debug.
 - After the above adjustments, becomes same to the original patch:
   https://github.com/torvalds/linux/commit/f61ff6c06dc8f32c7036013ad802c899ec590607
]
Signed-off-by: Zhiqiang Zhang <zhangzhiqiang.zhang@huawei.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 9fc81d87 upstream.

We allow PMU driver to change the cpu on which the event
should be installed to. This happened in patch:

  e2d37cd2 ("perf: Allow the PMU driver to choose the CPU on which to install events")

This patch also forces all the group members to follow
the currently opened events cpu if the group happened
to be moved.

This and the change of event->cpu in perf_install_in_context()
function introduced in:

  0cda4c02 ("perf: Introduce perf_pmu_migrate_context()")

forces group members to change their event->cpu,
if the currently-opened-event's PMU changed the cpu
and there is a group move.

Above behaviour causes problem for breakpoint events,
which uses event->cpu to touch cpu specific data for
breakpoints accounting. By changing event->cpu, some
breakpoints slots were wrongly accounted for given
cpu.

Vinces's perf fuzzer hit this issue and caused following
WARN on my setup:

   WARNING: CPU: 0 PID: 20214 at arch/x86/kernel/hw_breakpoint.c:119 arch_install_hw_breakpoint+0x142/0x150()
   Can't find any breakpoint slot
   [...]

This patch changes the group moving code to keep the event's
original cpu.
Reported-by: Vince Weaver <vince@deater.net>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vince@deater.net>
Cc: Yan, Zheng <zheng.z.yan@intel.com>
Link: http://lkml.kernel.org/r/1418243031-20367-3-git-send-email-jolsa@kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit af91568e upstream.

The uncore_collect_events functions assumes that event group
might contain only uncore events which is wrong, because it
might contain any type of events.

This bug leads to uncore framework touching 'not' uncore events,
which could end up all sorts of bugs.

One was triggered by Vince's perf fuzzer, when the uncore code
touched breakpoint event private event space as if it was uncore
event and caused BUG:

   BUG: unable to handle kernel paging request at ffffffff82822068
   IP: [<ffffffff81020338>] uncore_assign_events+0x188/0x250
   ...

The code in uncore_assign_events() function was looking for
event->hw.idx data while the event was initialized as a
breakpoint with different members in event->hw union.

This patch forces uncore_collect_events() to collect only uncore
events.
Reported-by: Vince Weaver <vince@deater.net>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yan, Zheng <zheng.z.yan@intel.com>
Link: http://lkml.kernel.org/r/1418243031-20367-2-git-send-email-jolsa@kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit e5535545 upstream.

Enabling the hardware I/O coherency on Armada 370, Armada 375, Armada
38x and Armada XP requires a certain number of conditions:

 - On Armada 370, the cache policy must be set to write-allocate.

 - On Armada 375, 38x and XP, the cache policy must be set to
   write-allocate, the pages must be mapped with the shareable
   attribute, and the SMP bit must be set

Currently, on Armada XP, when CONFIG_SMP is enabled, those conditions
are met. However, when Armada XP is used in a !CONFIG_SMP kernel, none
of these conditions are met. With Armada 370, the situation is worse:
since the processor is single core, regardless of whether CONFIG_SMP
or !CONFIG_SMP is used, the cache policy will be set to write-back by
the kernel and not write-allocate.

Since solving this problem turns out to be quite complicated, and we
don't want to let users with a mainline kernel known to have
infrequent but existing data corruptions, this commit proposes to
simply disable hardware I/O coherency in situations where it is known
not to work.

And basically, the is_smp() function of the kernel tells us whether it
is OK to enable hardware I/O coherency or not, so this commit slightly
refactors the coherency_type() function to return
COHERENCY_FABRIC_TYPE_NONE when is_smp() is false, or the appropriate
type of the coherency fabric in the other case.

Thanks to this, the I/O coherency fabric will no longer be used at all
in !CONFIG_SMP configurations. It will continue to be used in
CONFIG_SMP configurations on Armada XP, Armada 375 and Armada 38x
(which are multiple cores processors), but will no longer be used on
Armada 370 (which is a single core processor).

In the process, it simplifies the implementation of the
coherency_type() function, and adds a missing call to of_node_put().
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes: e60304f8 ("arm: mvebu: Add hardware I/O Coherency support")
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Link: https://lkml.kernel.org/r/1415871540-20302-3-git-send-email-thomas.petazzoni@free-electrons.comSigned-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 4bf9636c upstream.

Commit 9fc2105a ("ARM: 7830/1: delay: don't bother reporting
bogomips in /proc/cpuinfo") breaks audio in python, and probably
elsewhere, with message

  FATAL: cannot locate cpu MHz in /proc/cpuinfo

I'm not the first one to hit it, see for example

  https://theredblacktree.wordpress.com/2014/08/10/fatal-cannot-locate-cpu-mhz-in-proccpuinfo/
  https://devtalk.nvidia.com/default/topic/765800/workaround-for-fatal-cannot-locate-cpu-mhz-in-proc-cpuinf/?offset=1

Reading original changelog, I have to say "Stop breaking working setups.
You know who you are!".
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 9008d83f upstream.

Commit 705814b5 ("ARM: OMAP4+: PM: Consolidate OMAP4 PM code to
re-use it for OMAP5")

Moved logic generic for OMAP5+ as part of the init routine by
introducing omap4_pm_init. However, the patch left the powerdomain
initial setup, an unused omap4430 es1.0 check and a spurious log
"Power Management for TI OMAP4." in the original code.

Remove the duplicate code which is already present in omap4_pm_init from
omap4_init_static_deps.

As part of this change, also move the u-boot version print out of the
static dependency function to the omap4_pm_init function.

Fixes: 705814b5 ("ARM: OMAP4+: PM: Consolidate OMAP4 PM code to re-use it for OMAP5")
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 7b990789 upstream.

The change from \d+ to .+ inside __aligned() means that the following
structure:

  struct test {
        u8 a __aligned(2);
        u8 b __aligned(2);
  };

essentially gets modified to

  struct test {
        u8 a;
  };

for purposes of kernel-doc, thus dropping a struct member, which in
turns causes warnings and invalid kernel-doc generation.

Fix this by replacing the catch-all (".") with anything that's not a
semicolon ("[^;]").

Fixes: 9dc30918 ("scripts/kernel-doc: handle struct member __aligned without numbers")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 705304a8 upstream.

Same story as in commit 41080b5a ("nfsd race fixes: ext2") (similar
ext2 fix) except that nilfs2 needs to use insert_inode_locked4() instead
of insert_inode_locked() and a bug of a check for dead inodes needs to
be fixed.

If nilfs_iget() is called from nfsd after nilfs_new_inode() calls
insert_inode_locked4(), nilfs_iget() will wait for unlock_new_inode() at
the end of nilfs_mkdir()/nilfs_create()/etc to unlock the inode.

If nilfs_iget() is called before nilfs_new_inode() calls
insert_inode_locked4(), it will create an in-core inode and read its
data from the on-disk inode.  But, nilfs_iget() will find i_nlink equals
zero and fail at nilfs_read_inode_common(), which will lead it to call
iget_failed() and cleanly fail.

However, this sanity check doesn't work as expected for reused on-disk
inodes because they leave a non-zero value in i_mode field and it
hinders the test of i_nlink.  This patch also fixes the issue by
removing the test on i_mode that nilfs2 doesn't need.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 68f29815 upstream.

The torture test should quit once it actually induces an error in the
flash. This step was accidentally removed during refactoring.

Without this fix, the torturetest just continues infinitely, or until
the maximum cycle count is reached. e.g.:

   ...
   [ 7619.218171] mtd_test: error -5 while erasing EB 100
   [ 7619.297981] mtd_test: error -5 while erasing EB 100
   [ 7619.377953] mtd_test: error -5 while erasing EB 100
   [ 7619.457998] mtd_test: error -5 while erasing EB 100
   [ 7619.537990] mtd_test: error -5 while erasing EB 100
   ...

Fixes: 6cf78358 ("mtd: mtd_torturetest: use mtd_test helpers")
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 021b77be upstream.

Probably this code was syncing a lot more often then intended because
the do_sync variable wasn't set to zero.

Fixes: c62988ec ('ceph: avoid meaningless calling ceph_caps_revoking if sync_mode == WB_SYNC_ALL.')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 5a64e569 upstream.

Fix a bug where nfsd4_encode_components_esc() includes the esc_end char as
an additional string encoding.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Fixes: e7a0444a "nfsd: add IPv6 addr escaping to fs_location hosts"
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit ef17af2a upstream.

Bugs similar to the one in acbbe6fb (kcmp: fix standard comparison
bug) are in rich supply.

In this variant, the problem is that struct xdr_netobj::len has type
unsigned int, so the expression o1->len - o2->len _also_ has type
unsigned int; it has completely well-defined semantics, and the result
is some non-negative integer, which is always representable in a long
long. But this means that if the conditional triggers, we are
guaranteed to return a positive value from compare_blob.

In this case it could be fixed by

-       res = o1->len - o2->len;
+       res = (long long)o1->len - (long long)o2->len;

but I'd rather eliminate the usually broken 'return a - b;' idiom.
Reviewed-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 04a258c1 upstream.

When build with Debug the following crash is sometimes observed:
Call Trace:
 [<ffffffff812b9600>] string+0x40/0x100
 [<ffffffff812bb038>] vsnprintf+0x218/0x5e0
 [<ffffffff810baf7d>] ? trace_hardirqs_off+0xd/0x10
 [<ffffffff812bb4c1>] vscnprintf+0x11/0x30
 [<ffffffff8107a2f0>] vprintk+0xd0/0x5c0
 [<ffffffffa0051ea0>] ? vmbus_process_rescind_offer+0x0/0x110 [hv_vmbus]
 [<ffffffff8155c71c>] printk+0x41/0x45
 [<ffffffffa004ebac>] vmbus_device_unregister+0x2c/0x40 [hv_vmbus]
 [<ffffffffa0051ecb>] vmbus_process_rescind_offer+0x2b/0x110 [hv_vmbus]
...

This happens due to the following race: between 'if (channel->device_obj)' check
in vmbus_process_rescind_offer() and pr_debug() in vmbus_device_unregister() the
device can disappear. Fix the issue by taking an additional reference to the
device before proceeding to vmbus_device_unregister().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 8bfbe2de upstream.

Commit 19e2ad6a ("n_tty: Remove overflow
tests from receive_buf() path") moved the increment of read_head into
the arguments list of read_buf_addr(). Function calls represent a
sequence point in C. Therefore read_head is incremented before the
character c is placed in the buffer. Since the circular read buffer is
a lock-less design since commit 6d76bd26
("n_tty: Make N_TTY ldisc receive path lockless"), this creates a race
condition that leads to communication errors.

This patch modifies the code to increment read_head _after_ the data
is placed in the buffer and thus fixes the race for non-SMP machines.
To fix the problem for SMP machines, memory barriers must be added in
a separate patch.
Signed-off-by: Christian Riesch <christian.riesch@omicron.at>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 1ff383a4 upstream.

This patch adds waiting until transmit buffer and shifter will be empty
before clock disabling.

Without this fix it's possible to have clock disabled while data was
not transmited yet, which causes unproper state of TX line and problems
in following data transfers.
Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 9c6ac78e upstream.

After invoking ->dirty_inode(), __mark_inode_dirty() does smp_mb() and
tests inode->i_state locklessly to see whether it already has all the
necessary I_DIRTY bits set.  The comment above the barrier doesn't
contain any useful information - memory barriers can't ensure "changes
are seen by all cpus" by itself.

And it sure enough was broken.  Please consider the following
scenario.

 CPU 0					CPU 1
 -------------------------------------------------------------------------------

					enters __writeback_single_inode()
					grabs inode->i_lock
					tests PAGECACHE_TAG_DIRTY which is clear
 enters __set_page_dirty()
 grabs mapping->tree_lock
 sets PAGECACHE_TAG_DIRTY
 releases mapping->tree_lock
 leaves __set_page_dirty()

 enters __mark_inode_dirty()
 smp_mb()
 sees I_DIRTY_PAGES set
 leaves __mark_inode_dirty()
					clears I_DIRTY_PAGES
					releases inode->i_lock

Now @inode has dirty pages w/ I_DIRTY_PAGES clear.  This doesn't seem
to lead to an immediately critical problem because requeue_inode()
later checks PAGECACHE_TAG_DIRTY instead of I_DIRTY_PAGES when
deciding whether the inode needs to be requeued for IO and there are
enough unintentional memory barriers inbetween, so while the inode
ends up with inconsistent I_DIRTY_PAGES flag, it doesn't fall off the
IO list.

The lack of explicit barrier may also theoretically affect the other
I_DIRTY bits which deal with metadata dirtiness.  There is no
guarantee that a strong enough barrier exists between
I_DIRTY_[DATA]SYNC clearing and write_inode() writing out the dirtied
inode.  Filesystem inode writeout path likely has enough stuff which
can behave as full barrier but it's theoretically possible that the
writeout may not see all the updates from ->dirty_inode().

Fix it by adding an explicit smp_mb() after I_DIRTY clearing.  Note
that I_DIRTY_PAGES needs a special treatment as it always needs to be
cleared to be interlocked with the lockless test on
__mark_inode_dirty() side.  It's cleared unconditionally and
reinstated after smp_mb() if the mapping still has dirty pages.

Also add comments explaining how and why the barriers are paired.

Lightly tested.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit d908f847 upstream.

If probe() fails not only the attributes need to be removed
but also the memory freed.
Reported-by: Ahmed Tamrawi <ahmedtamrawi@gmail.com>
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 5fabcb4c upstream.

We can get here from blkdev_ioctl() -> blkpg_ioctl() -> add_partition()
with a user passed in partno value. If we pass in 0x7fffffff, the
new target in disk_expand_part_tbl() overflows the 'int' and we
access beyond the end of ptbl->part[] and even write to it when we
do the rcu_assign_pointer() to assign the new partition.
Reported-by: David Ramos <daramos@stanford.edu>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 007487f1 upstream.

Currently we enable Exynos devices in the multi v7 defconfig, however, when
testing on my ODROID-U3, I noticed that USB was not working.  Enabling this
option causes USB to work, which enables networking support as well since the
ODROID-U3 has networking on the USB bus.

[arnd] Support for odroid-u3 was added in 3.10, so it would be nice to
backport this fix at least that far.
Signed-off-by: Steev Klimaszewski <steev@gentoo.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 403dff4e upstream.

We need to check that we have both a valid data and control inteface for both
types of headers (union and not union.)

References: https://bugzilla.kernel.org/show_bug.cgi?id=83551Reported-by: Simon Schubert <2+kernel@0x2c.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit c507de88 upstream.

stac_store_hints() does utterly wrong for masking the values for
gpio_dir and gpio_data, likely due to copy&paste errors.  Fortunately,
this feature is used very rarely, so the impact must be really small.
Reported-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 69eba10e upstream.

In olden times the snd_hda_param_read() function always set "*start_id"
but in 2007 we introduced a new return and it causes uninitialized data
bugs in a couple of the callers: print_codec_info() and
hdmi_parse_codec().

Fixes: e8a7f136 ('[ALSA] hda-intel - Improve HD-audio codec probing robustness')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit d70a1b98 upstream.

The Arcam rPAC seems to have the same problem - whenever anything
(alsamixer, udevd, 3.9+ kernel from 60af3d03, ..) attempts to
access mixer / control interface of the card, the firmware "locks up"
the entire device, resulting in
  SNDRV_PCM_IOCTL_HW_PARAMS failed (-5): Input/output error
from alsa-lib.

Other operating systems can somehow read the mixer (there seems to be
playback volume/mute), but any manipulation is ignored by the device
(which has hardware volume controls).
Signed-off-by: Jiri Jaburek <jjaburek@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit bb34cb6b upstream.

bus_find_device_by_name() acquires a device reference which is never
released.  This results in an object leak, which on older kernels
results in failure to release all resources of PCI devices.  libvirt
uses drivers_probe to re-attach devices to the host after assignment
and is therefore a common trigger for this leak.

Example:

# cd /sys/bus/pci/
# dmesg -C
# echo 1 > devices/0000\:01\:00.0/sriov_numvfs
# echo 0 > devices/0000\:01\:00.0/sriov_numvfs
# dmesg | grep 01:10
 pci 0000:01:10.0: [8086:10ca] type 00 class 0x020000
 kobject: '0000:01:10.0' (ffff8801d79cd0a8): kobject_add_internal: parent: '0000:00:01.0', set: 'devices'
 kobject: '0000:01:10.0' (ffff8801d79cd0a8): kobject_uevent_env
 kobject: '0000:01:10.0' (ffff8801d79cd0a8): fill_kobj_path: path = '/devices/pci0000:00/0000:00:01.0/0000:01:10.0'
 kobject: '0000:01:10.0' (ffff8801d79cd0a8): kobject_uevent_env
 kobject: '0000:01:10.0' (ffff8801d79cd0a8): fill_kobj_path: path = '/devices/pci0000:00/0000:00:01.0/0000:01:10.0'
 kobject: '0000:01:10.0' (ffff8801d79cd0a8): kobject_uevent_env
 kobject: '0000:01:10.0' (ffff8801d79cd0a8): fill_kobj_path: path = '/devices/pci0000:00/0000:00:01.0/0000:01:10.0'
 kobject: '0000:01:10.0' (ffff8801d79cd0a8): kobject_cleanup, parent           (null)
 kobject: '0000:01:10.0' (ffff8801d79cd0a8): calling ktype release
 kobject: '0000:01:10.0': free name

[kobject freed as expected]

# dmesg -C
# echo 1 > devices/0000\:01\:00.0/sriov_numvfs
# echo 0000:01:10.0 > drivers_probe
# echo 0 > devices/0000\:01\:00.0/sriov_numvfs
# dmesg | grep 01:10
 pci 0000:01:10.0: [8086:10ca] type 00 class 0x020000
 kobject: '0000:01:10.0' (ffff8801d79ce0a8): kobject_add_internal: parent: '0000:00:01.0', set: 'devices'
 kobject: '0000:01:10.0' (ffff8801d79ce0a8): kobject_uevent_env
 kobject: '0000:01:10.0' (ffff8801d79ce0a8): fill_kobj_path: path = '/devices/pci0000:00/0000:00:01.0/0000:01:10.0'
 kobject: '0000:01:10.0' (ffff8801d79ce0a8): kobject_uevent_env
 kobject: '0000:01:10.0' (ffff8801d79ce0a8): fill_kobj_path: path = '/devices/pci0000:00/0000:00:01.0/0000:01:10.0'
 kobject: '0000:01:10.0' (ffff8801d79ce0a8): kobject_uevent_env
 kobject: '0000:01:10.0' (ffff8801d79ce0a8): fill_kobj_path: path = '/devices/pci0000:00/0000:00:01.0/0000:01:10.0'

[no free]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 1ddf0b1b upstream.

In Linux 3.18 and below, GCC hoists the lsl instructions in the
pvclock code all the way to the beginning of __vdso_clock_gettime,
slowing the non-paravirt case significantly.  For unknown reasons,
presumably related to the removal of a branch, the performance issue
is gone as of

e76b027e x86,vdso: Use LSL unconditionally for vgetcpu

but I don't trust GCC enough to expect the problem to stay fixed.

There should be no correctness issue, because the __getcpu calls in
__vdso_vlock_gettime were never necessary in the first place.

Note to stable maintainers: In 3.18 and below, depending on
configuration, gcc 4.9.2 generates code like this:

     9c3:       44 0f 03 e8             lsl    %ax,%r13d
     9c7:       45 89 eb                mov    %r13d,%r11d
     9ca:       0f 03 d8                lsl    %ax,%ebx

This patch won't apply as is to any released kernel, but I'll send a
trivial backported version if needed.

[
 Backported by Andy Lutomirski.  Should apply to all affected
 versions.  This fixes a functionality bug as well as a performance
 bug: buggy kernels can infinite loop in __vdso_clock_gettime on
 affected compilers.  See, for exammple:

 https://bugzilla.redhat.com/show_bug.cgi?id=1178975
]

Fixes: 51c19b4f x86: vdso: pvclock gettime support
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 394f56fe upstream.

The theory behind vdso randomization is that it's mapped at a random
offset above the top of the stack.  To avoid wasting a page of
memory for an extra page table, the vdso isn't supposed to extend
past the lowest PMD into which it can fit.  Other than that, the
address should be a uniformly distributed address that meets all of
the alignment requirements.

The current algorithm is buggy: the vdso has about a 50% probability
of being at the very end of a PMD.  The current algorithm also has a
decent chance of failing outright due to incorrect handling of the
case where the top of the stack is near the top of its PMD.

This fixes the implementation.  The paxtest estimate of vdso
"randomisation" improves from 11 bits to 18 bits.  (Disclaimer: I
don't know what the paxtest code is actually calculating.)

It's worth noting that this algorithm is inherently biased: the vdso
is more likely to end up near the end of its PMD than near the
beginning.  Ideally we would either nix the PMD sharing requirement
or jointly randomize the vdso and the stack to reduce the bias.

In the mean time, this is a considerable improvement with basically
no risk of compatibility issues, since the allowed outputs of the
algorithm are unchanged.

As an easy test, doing this:

for i in `seq 10000`
  do grep -P vdso /proc/self/maps |cut -d- -f1
done |sort |uniq -d

used to produce lots of output (1445 lines on my most recent run).
A tiny subset looks like this:

7fffdfffe000
7fffe01fe000
7fffe05fe000
7fffe07fe000
7fffe09fe000
7fffe0bfe000
7fffe0dfe000

Note the suspicious fe000 endings.  With the fix, I get a much more
palatable 76 repeated addresses.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit a629df7e upstream.

Since most virtual machines raise this message once, it is a bit annoying.
Make it KERN_DEBUG severity.

Fixes: 7a2e8aafSigned-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 2bacedad upstream.

New Genius MousePen i608X devices have a new id 0x501a instead of the
old 0x5011 so add a new #define with "_2" appended and change required
places.

The remaining two checkpatch warnings about line length
being over 80 characters are present in the original files too and this
patch was made in the same style (no line break).

Just adding a new id and changing the required places should make the
new device work without any issues according to the bug report in the
following url.

This patch was made according to and fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=67111Signed-off-by: Giedrius Statkevičius <giedrius.statkevicius@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit da940db4 upstream.

Apple bluetooth wireless keyboard (sold in UK) has always reported zero
for battery strength no matter what condition the batteries are actually
in. With this patch applied (applying same quirk as other Apple
keyboards), the battery strength is now correctly reported.
Signed-off-by: Karl Relton <karllinuxtest.relton@ntlworld.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 606185b2 upstream.

This is a static checker fix.  We write some binary settings to the
sysfs file.  One of the settings is the "->startup_profile".  There
isn't any checking to make sure it fits into the
pyra->profile_settings[] array in the profile_activated() function.

I added a check to pyra_sysfs_write_settings() in both places because
I wasn't positive that the other callers were correct.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit d1c7e29e upstream.

Before ->start() is called, bufsize size is set to HID_MIN_BUFFER_SIZE,
64 bytes. While processing the IRQ, we were asking to receive up to
wMaxInputLength bytes, which can be bigger than 64 bytes.

Later, when ->start is run, a proper bufsize will be calculated.

Given wMaxInputLength is said to be unreliable in other part of the
code, set to receive only what we can even if it results in truncated
reports.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 6296f4a8 upstream.

Current driver uses a common buffer for reading reports either
synchronously in i2c_hid_get_raw_report() and asynchronously in
the interrupt handler.
There is race condition if an interrupt arrives immediately after
the report is received in i2c_hid_get_raw_report(); the common
buffer is modified by the interrupt handler with the new report
and then i2c_hid_get_raw_report() proceed using wrong data.

Fix it by using a separate buffers for synchronous reports.
Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
[Antonio Borneo: cleanup, rebase to v3.17, submit mainline]
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit cc4f14aa upstream.

There's an off-by-one bug in function __domain_mapping(), which may
trigger the BUG_ON(nr_pages < lvl_pages) when
	(nr_pages + 1) & superpage_mask == 0

The issue was introduced by commit 9051aa02 "intel-iommu: Combine
domain_pfn_mapping() and domain_sg_mapping()", which sets sg_res to
"nr_pages + 1" to avoid some of the 'sg_res==0' code paths.

It's safe to remove extra "+1" because sg_res is only used to calculate
page size now.
Reported-And-Tested-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Acked-By: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit aa5ad3b6 upstream.

If the erase worker is unable to erase a PEB it will
free the ubi_wl_entry itself.
The failing ubi_wl_entry must not free()'d again after
do_sync_erase() returns.
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit f38aed97 upstream.

The logic of vfree()'ing vol->upd_buf is tied to vol->updating.
In ubi_start_update() vol->updating is set long before vmalloc()'ing
vol->upd_buf. If we encounter a write failure in ubi_start_update()
before vmalloc() the UBI device release function will try to vfree()
vol->upd_buf because vol->updating is set.
Fix this by allocating vol->upd_buf directly after setting vol->updating.

Fixes:
[   31.559338] UBI warning: vol_cdev_release: update of volume 2 not finished, volume is damaged
[   31.559340] ------------[ cut here ]------------
[   31.559343] WARNING: CPU: 1 PID: 2747 at mm/vmalloc.c:1446 __vunmap+0xe3/0x110()
[   31.559344] Trying to vfree() nonexistent vm area (ffffc90001f2b000)
[   31.559345] Modules linked in:
[   31.565620]  0000000000000bba ffff88002a0cbdb0 ffffffff818f0497 ffff88003b9ba148
[   31.566347]  ffff88002a0cbde0 ffffffff8156f515 ffff88003b9ba148 0000000000000bba
[   31.567073]  0000000000000000 0000000000000000 ffff88002a0cbe88 ffffffff8156c10a
[   31.567793] Call Trace:
[   31.568034]  [<ffffffff818f0497>] dump_stack+0x4e/0x7a
[   31.568510]  [<ffffffff8156f515>] ubi_io_write_vid_hdr+0x155/0x160
[   31.569084]  [<ffffffff8156c10a>] ubi_eba_write_leb+0x23a/0x870
[   31.569628]  [<ffffffff81569b36>] vol_cdev_write+0x226/0x380
[   31.570155]  [<ffffffff81179265>] vfs_write+0xb5/0x1f0
[   31.570627]  [<ffffffff81179f8a>] SyS_pwrite64+0x6a/0xa0
[   31.571123]  [<ffffffff818fde12>] system_call_fastpath+0x16/0x1b
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 027bc8b0 upstream.

On some ARMs the memory can be mapped pgprot_noncached() and still
be working for atomic operations. As pointed out by Colin Cross
<ccross@android.com>, in some cases you do want to use
pgprot_noncached() if the SoC supports it to see a debug printk
just before a write hanging the system.

On ARMs, the atomic operations on strongly ordered memory are
implementation defined. So let's provide an optional kernel parameter
for configuring pgprot_noncached(), and use pgprot_writecombine() by
default.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robherring2@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Russell King <linux@arm.linux.org.uk>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 7ae9cb81 upstream.

Currently trying to use pstore on at least ARMs can hang as we're
mapping the peristent RAM with pgprot_noncached().

On ARMs, pgprot_noncached() will actually make the memory strongly
ordered, and as the atomic operations pstore uses are implementation
defined for strongly ordered memory, they may not work. So basically
atomic operations have undefined behavior on ARM for device or strongly
ordered memory types.

Let's fix the issue by using write-combine variants for mappings. This
corresponds to normal, non-cacheable memory on ARM. For many other
architectures, this change does not change the mapping type as by
default we have:

#define pgprot_writecombine pgprot_noncached

The reason why pgprot_noncached() was originaly used for pstore
is because Colin Cross <ccross@android.com> had observed lost
debug prints right before a device hanging write operation on some
systems. For the platforms supporting pgprot_noncached(), we can
add a an optional configuration option to support that. But let's
get pstore working first before adding new features.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Anton Vorontsov <cbouatmailru@gmail.com>
Cc: Colin Cross <ccross@android.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: linux-kernel@vger.kernel.org
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
[tony@atomide.com: updated description]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 36e81648 upstream.

Commit 6ac665c6 ("PCI: rewrite PCI BAR reading code") masked off
low-order bits from 'l', but not from 'sz'.  Both are passed to pci_size(),
which compares 'base == maxbase' to check for read-only BARs.  The masking
of 'l' means that comparison will never be 'true', so the check for
read-only BARs no longer works.

Resolve this by also masking off the low-order bits of 'sz' before passing
it into pci_size() as 'maxbase'.  With this change, pci_size() will once
again catch the problems that have been encountered to date:

  - AGP aperture BAR of AMD-7xx host bridges: if the AGP window is
    disabled, this BAR is read-only and read as 0x00000008 [1]

  - BARs 0-4 of ALi IDE controllers can be non-zero and read-only [1]

  - Intel Sandy Bridge - Thermal Management Controller [8086:0103];
    BAR 0 returning 0xfed98004 [2]

  - Intel Xeon E5 v3/Core i7 Power Control Unit [8086:2fc0];
    Bar 0 returning 0x00001a [3]

Link: [1] https://git.kernel.org/cgit/linux/kernel/git/tglx/history.git/commit/drivers/pci/probe.c?id=1307ef6621991f1c4bc3cec1b5a4ebd6fd3d66b9 ("PCI: probing read-only BARs" (pre-git))
Link: [2] https://bugzilla.kernel.org/show_bug.cgi?id=43331
Link: [3] https://bugzilla.kernel.org/show_bug.cgi?id=85991Reported-by: William Unruh <unruh@physics.ubc.ca>
Reported-by: Martin Lucina <martin@lucina.net>
Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>