- 13 Jan, 2021 8 commits
-
-
Jernej Skrabec authored
DE3 supports 10-bit formats, so it's only naturally to also support BT2020 encoding. Add support for it. Signed-off-by:
Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210110201947.3611649-4-jernej.skrabec@siol.net
-
Jernej Skrabec authored
YUV to RGB matrices are almost identical to YVU to RGB matrices. They only have second and third column reversed. Do that reversion in code in order to lower amount of static data and redundancy. Signed-off-by:
-
Jernej Skrabec authored
Rework DE3 CSC macros to take just one coordinate instead of two. This will make its usage easier in subsequent commit. Signed-off-by:
-
Sebastian Reichel authored
Standard DRM panel driver for DSI command mode panel used by omapfb2 is also available now. Just like the other panels its module name clashes with the module from drivers/video/fbdev/omap2/omapfb/displays, part of the deprecated omapfb2 fbdev driver. As omapfb2 can only be compiled when the omapdrm driver is disabled, and the DRM panel drivers are useless in that case, make the omapfb2 panel depend on the standard DRM panels being disabled to fix the name clash. Fixes: cf64148a ("drm/panel: Move OMAP's DSI command mode panel driver") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210108112441.14609-1-sebastian.reichel@collabora.com
-
Thomas Zimmermann authored
Using struct drm_device.pdev is deprecated. Convert nouveau to struct drm_device.dev. No functional changes. v3: * fix nv04_dfp_update_backlight() as well (Jeremy) Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Jeremy Cline <jcline@redhat.com> Cc: Ben Skeggs <bskeggs@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210107080748.4768-8-tzimmermann@suse.de
-
Thomas Zimmermann authored
Using struct drm_device.pdev is deprecated. Convert hibmc to struct drm_device.dev. No functional changes. v3: * rebased Signed-off-by:
Tian Tao <tiantao6@hisilicon.com> Acked-by:
-
Thomas Zimmermann authored
Using struct drm_device.pdev is deprecated. Convert amdgpu to struct drm_device.dev. No functional changes. v3: * rebased Signed-off-by:
Christian König <christian.koenig@amd.com> Acked-by:
Alex Deucher <alexander.deucher@amd.com> Acked-by:
-
Thomas Zimmermann authored
Adhere to kernel coding style. Signed-off-by:
-
- 12 Jan, 2021 10 commits
-
-
Sumera Priyadarsini authored
Update vkms documentation to contain usage of `modinfo` command and steps to load vkms with module options enabled. Signed-off-by:
Sumera Priyadarsini <sylphrenadin@gmail.com> Reviewed-by:
Melissa Wen <melissa.srw@gmail.com> Signed-off-by:
-
Sumera Priyadarsini authored
Add enable_writeback feature to vkms_config as a module. Signed-off-by:
-
Sumera Priyadarsini authored
Currently, data for the device instance is held by vkms_device. Add a separate type, vkms_config to contain configuration details for the device and various modes to be later used by configfs. This config data stays constant once the device is created. Accordingly, add vkms_create and vkms_destroy to initialize/destroy device through configfs. Currently, they are being called from vkms_init and vkms_exit, but will be evoked from configfs later on. When configfs is added, device configuration will be tracked by configfs and only vkms device lifetime will be handled by vkms_init and vkms_exit functions. Modify usage of enable_cursor feature to reflect the changes in relevant files. Co-developed-by:
Daniel Vetter <danvet.vetter@ffwl.ch> Signed-off-by:
-
Simon Ser authored
The comment says the layout and options use 8 bits, and the shift uses 8 bits. However the mask is 0xf, ie. 0b00001111 (4 bits). This could be surprising when introducing new layouts or options that take more than 4 bits, as this would silently drop the high bits. Make the masks consistent with the comment and the shift. Found when writing a drm_info patch [1]. [1]: https://github.com/ascent12/drm_info/pull/67Signed-off-by:
Simon Ser <contact@emersion.fr> Fixes: d6528ec8 ("drm/fourcc: Add modifier definitions for describing Amlogic Video Framebuffer Compression") Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by:
Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210110125103.15447-1-contact@emersion.fr
-
Xiaogang Chen authored
drm_dp_check_and_send_link_address discovers MST device topology. It can return both positive and negative values. When it returns positive values there is no error found. If it returns negative values there is error found, such as get NAK , timeout, etc. Following drm_kms_helper_hotplug_event should be called when drm_dp_check_and_send_link_address returns positive value. Signed-off-by:
Xiaogang Chen <xiaogang.chen@amd.com> Acked-by:
-
Zhaoge Zhang authored
Signed-off-by:
Zhaoge Zhang <zhangzhaoge@loongson.cn> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1610416479-32736-1-git-send-email-zhangzhaoge@loongson.cn
-
Zhaoge Zhang authored
Signed-off-by:
-
Linus Walleij authored
This fixes the following problems with the s6e63m0 display bindings: - When used on the DSI bus, the panel is listed directly as a subnode on the DSI host so the "port" node is not compulsory. Remove "port" from required properties. - The panel contains its own backlight control, so reference the backlight common properties and list default-brightness and max-brightness as supported but optional properties. Cc: devicetree@vger.kernel.org Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210101114522.1981838-1-linus.walleij@linaro.org
-
Tian Tao authored
Use drm_crtc_mask() where appropriate. Signed-off-by:
-
Rob Herring authored
Now that we have a graph schema, rework the display related schemas to use it. Mostly this is adding a reference to graph.yaml and dropping duplicate parts from schemas. In panel-common.yaml, 'ports' is dropped. Any binding using 'ports' should be one with more than 1 port node, and the binding must define what each port is. Note that ti,sn65dsi86.yaml, ti,tfp410,yaml and toshiba,tc358768.yaml will need further updates to use video-interfaces.yaml once that lands. Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210104180724.2275098-1-robh@kernel.org
-
- 14 Jan, 2021 4 commits
-
-
Nirmoy Das authored
This allows BAR0 resizing to be done for cards which don't advertise support for a size large enough to cover the VRAM but which do advertise at least one size larger than the default. For example, my RX 5600 XT, which advertises 256MB, 512MB and 1GB. Signed-off-by:
Darren Salt <devspam@moreofthesa.me.uk> Signed-off-by:
Nirmoy Das <nirmoy.das@amd.com> Reviewed-by:
-
Nirmoy Das authored
RX 5600 XT Pulse advertises support for BAR 0 being 256MB, 512MB, or 1GB, but it also supports 2GB, 4GB, and 8GB. Add a rebar size quirk so that the BAR 0 is big enough to cover complete VARM. Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Link: https://patchwork.kernel.org/project/dri-devel/patch/20210107175017.15893-5-nirmoy.das@amd.com
-
Nirmoy Das authored
Users of pci_resize_resource() need a way to calculate BAR size from desired bytes. Add a helper function and export it so that modular drivers can use it. Signed-off-by:
-
Darren Salt authored
Export pci_rebar_get_possible_sizes() for use by modular drivers. Signed-off-by:
-
- 11 Jan, 2021 3 commits
-
-
Chia-I Wu authored
commit 16845c5d ("drm/virtio: implement blob resources: implement vram object") and commit c6069a02 ("drm/virtgpu: Set PRIME export function in struct drm_gem_object_funcs") landed from different trees, resulting in prime export never working for vram objects. Cc: Gurchetan Singh <gurchetansingh@chromium.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
Chia-I Wu <olvaffe@gmail.com> Reviewed-by:
Gurchetan Singh <gurchetansingh@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20210107210743.269885-1-olvaffe@gmail.comSigned-off-by:
Gerd Hoffmann <kraxel@redhat.com>
-
Chia-I Wu authored
The context might still be missing when DRM_IOCTL_PRIME_FD_TO_HANDLE is the first ioctl on the drm_file. Fixes: 72b48ae8 ("drm/virtio: enqueue virtio_gpu_create_context after the first 3D ioctl") Cc: Gurchetan Singh <gurchetansingh@chromium.org> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
-
Tian Tao authored
Based on the drm_connector_mode_valid, if the hibmc implementation of mode_valid only returns MODE_OK, then we need not implement the mode_valid function. Signed-off-by:
-
- 08 Jan, 2021 2 commits
-
-
Jonathan Neuschäfer authored
The syntax without dots is available since commit 43756e34 ("scripts/kernel-doc: Add support for named variable macro arguments"). The same HTML output is produced with and without this patch. Signed-off-by:
Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by:
-
Tian Tao authored
The hibmc driver uses empty implementations for its encoders. Replace the code with the generic simple encoder. Signed-off-by:
-
- 07 Jan, 2021 7 commits
-
-
Maarten Lankhorst authored
Staying in sync to drm-next, and to be able to pull ttm fixes. Signed-off-by:Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-
git://anongit.freedesktop.org/drm/drm-miscDaniel Vetter authored
drm-misc-next for v5.12: Core Changes: - Lots of drm documentation updates by Simor Ser. - Require that each crtc has a unique primary plane. - Add fixme that fbdev_generic_setup is confusing. Driver Changes: - Update addresses for TI display drivers maintainers. - Make DRM_VIRTIO_GPU select VIRTIO. - Small fixes to qxl, virtio, hisilicon, tve200, panel/s6e63m0. Signed-off-by:
-
git://linuxtv.org/pinchartl/mediaDaniel Vetter authored
- Add default modes for connectors in unknown state - R-Car DU conversion to DRM-managed API - R-Car DU miscellaneous fixes - Miscellaneous bridge and bridge bindings fixes - Assorted misc driver cleanups - Constify drm_driver for PCI devices Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-intelDaniel Vetter authored
- Display hotplug fix for gen2/gen3 (Chris) - Remove trailing semicolon (Tom) - Suppress display warnings for old ifwi presend on our CI (Chris) - OA/Perf related workaround (Lionel) - Replace I915_READ/WRITE per new uncore and display read/write functions (Jani) - PSR improvements (Jose) - HDR and other color changes on LSPCON (Uma, Ville) - FBC fixes for TGL (Uma) - Record plane update times for debugging (Chris) - Refactor panel backlight control functions (Dave) - Display power improvements (Imre) - Add VRR register definition (Manasi) - Atomic modeset improvements for bigjoiner pipes (Ville) - Switch off the scanout during driver unregister (Chris) - Clean-up DP's FEW enable (Manasi) - Fix VDSCP slice count (Manasi) - Fix and clean up around rc_model_size for DSC (Jani) - Remove Type-C noisy debug warn message (Sean) - Display HPD code clean-up (Ville) - Refactor Intel Display (Dave) - Start adding support for Intel's eDP backlight controls (Lyude) Signed-off-by:
-
git://git.pengutronix.de/git/pza/linuxDaniel Vetter authored
drm/imx: fixes and drm managed resources - Reduce stack usage in ipu-di. - Fix imx-ldb for compile tests. - Make drm encoder control functions optional. - Add drm managed variants drmm_encoder_alloc(), drmm_simple_encoder_alloc(), drmm_universal_plane_alloc(), and drmm_crtc_alloc_with_planes() for drm_encoder_init(), drm_simple_encoder_init(), drm_universal_plane_init(), and drm_crtc_init_with_planes(), respectively. - Update imx-drm to use the new functions for drm managed resource allocation, moving initialization from bind to probe where possible. - Fix imx-tve clock provider leak. Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> [danvet: Fix conflict between doc changes by both Philipp and Simon Ser, see 9999587b ("drm: rework description of primary and cursor planes")] From: Philipp Zabel <p.zabel@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/c745fc1596898932c9454fd2979297b4242566a2.camel@pengutronix.de
-
Daniel Vetter authored
Merge tag 'topic/dp-hdmi-2.1-pcon-2020-12-23' of git://anongit.freedesktop.org/drm/drm-intel into drm-next Add support for DP-HDMI2.1 PCON From the series cover letter: This patch series attempts to add support for a DP-HDMI2.1 Protocol Convertor. The VESA spec for the HDMI2.1 PCON are proposed in Errata E5 to DisplayPort_v2.0: https://vesa.org/join-vesamemberships/member-downloads/?action=stamp&fileid=42299 The details are mentioned in: VESA DP-to-HDMI PCON Specification Standalone Document https://groups.vesa.org/wg/DP/document/15651 This series starts with adding support for FRL (Fixed Rate Link) Training between the PCON and HDMI2.1 sink. As per HDMI2.1 specification, a new data-channel or lane is added in FRL mode, by repurposing the TMDS clock Channel. Through FRL, higher bit-rate can be supported, ie. up to 12 Gbps/lane (48 Gbps over 4 lanes). With these patches, the HDMI2.1 PCON can be configured to achieve FRL training based on the maximum FRL rate supported by the panel, source and the PCON. The approach is to add the support for FRL training between PCON and HDMI2.1 sink and gradually add other blocks for supporting higher resolutions and other HDMI2.1 features, that can be supported by pcon for the sources that do not natively support HDMI2.1. This is done before the DP Link training between the source and PCON is started. In case of FRL training is not achieved, the PCON will work in the regular TMDS mode, without HDMI2.1 feature support. Any interruption in FRL training between the PCON and HDMI2.1 sink is notified through IRQ_HPD. On receiving the IRQ_HPD the concerned DPCD registers are read and FRL training is re-attempted. Currently, we have tested the FRL training and are able to enable 4K display with TGL Platform + Realtek PCON RTD2173 with HDMI2.1 supporting panel. Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-miscDaniel Vetter authored
drm-misc-next for v5.12: UAPI Changes: - Not necessarily one, but we document that userspace needs to force probe connectors. Cross-subsystem Changes: - Require FB_ATY_CT for aty on sparc64. - video: Fix documentation, and a few compiler warnings. - Add devicetree bindings for DP connectors. - dma-buf: Update kernel-doc, and add might_lock for resv objects in begin/end_cpu_access. Core Changes: - ttm: Warn when releasing a pinned bo. - ttm: Cleanup bo size handling. - cma-helper: Remove prime infix, and implement mmap as GEM CMA functions. - Split drm_prime_sg_to_page_addr_arrays into 2 functions. - Add a new api to install irq using devm. - Update panel kerneldoc to inline style. - Add DP support to drm/bridge. - Assorted small fixes to ttm, fb-helper, scheduler. - Add atomic_commit_setup function callback. - Automatically use the atomic gamma_set, instead of forcing drivers to declare the default atomic version. - Allow using degamma for legacy gamma if gamma is not available. - Clarify that primary/cursor planes are not tied to 1 crtc (depending on possible_crtcs). - ttm: Cleanup the lru handler. Driver Changes: - Add pm support to ingenic. - Assorted small fixes in radeon, via, rockchip, omap2fb, kmb, gma500, nouveau, virtio, hisilicon, ingenic, s6e63m0 panel, ast, udlfb. - Add BOE NV110WTM-N61, ys57pss36bh5gq, Khadas TS050 panels. - Stop using pages with drm_prime_sg_to_page_addr_arrays, and switch all callers to use ttm_sg_tt_init. - Cleanup compiler and docbook warnings in a lot of fbdev devices. - Use the drmm_vram_helper in hisilicon. - Add support for BCM2711 DSI1 in vc4. - Add support for 8-bit delta RGB panels to ingenic. - Add documentation on how to test vkms. - Convert vc4 to atomic helpers. - Use degamma instead of gamma table in omap, to add support for CTM and color encoding/range properties. - Rework omap DSI code, and merge all omapdrm modules now that the last omap panel is now a drm panel. - More refactoring of omap dsi code. - Enable 10/12 bpc outputs in vc4. Signed-off-by:
-
- 06 Jan, 2021 6 commits
-
-
Lyude Paul authored
Recently a regression was introduced which caused TTM's buffer eviction to attempt to evict already-pinned BOs, causing issues with buffer eviction under memory pressure along with suspend/resume: nouveau 0000:1f:00.0: DRM: evicting buffers... nouveau 0000:1f:00.0: DRM: Moving pinned object 00000000c428c3ff! nouveau 0000:1f:00.0: fifo: fault 00 [READ] at 0000000000200000 engine 04 [BAR1] client 07 [HUB/HOST_CPU] reason 02 [PTE] on channel -1 [00ffeaa000 unknown] nouveau 0000:1f:00.0: fifo: DROPPED_MMU_FAULT 00001000 nouveau 0000:1f:00.0: fifo: fault 01 [WRITE] at 0000000000020000 engine 0c [HOST6] client 07 [HUB/HOST_CPU] reason 02 [PTE] on channel 1 [00ffb28000 DRM] nouveau 0000:1f:00.0: fifo: channel 1: killed nouveau 0000:1f:00.0: fifo: runlist 0: scheduled for recovery [TTM] Buffer eviction failed nouveau 0000:1f:00.0: DRM: waiting for kernel channels to go idle... nouveau 0000:1f:00.0: DRM: failed to idle channel 1 [DRM] nouveau 0000:1f:00.0: DRM: resuming display... After some bisection and investigation, it appears this resulted from the recent changes to ttm_bo_move_to_lru_tail(). Previously when a buffer was pinned, the buffer would be removed from the LRU once ttm_bo_unreserve to maintain the LRU list when pinning or unpinning BOs. However, since: commit 3d1a88e1 ("drm/ttm: cleanup LRU handling further") We've been exiting from ttm_bo_move_to_lru_tail() at the very beginning of the function if the bo we're looking at is pinned, resulting in the pinned BO never getting removed from the lru and as a result - causing issues when it eventually becomes time for eviction. So, let's fix this by calling ttm_bo_del_from_lru() from ttm_bo_move_to_lru_tail() in the event that we're dealing with a pinned buffer. v2 (chk): reduce to only the fixing one liner since we always want to call the callback whenever we would move on the LRU. Fixes: 3d1a88e1 ("drm/ttm: cleanup LRU handling further") Cc: Dave Airlie <airlied@redhat.com> Reviewed-by:
Lyude Paul <lyude@redhat.com> Signed-off-by:
-
Phil Elwell authored
MMU exception conditions are reported in the V3D_MMU_CTRL register as write-1-to-clear (W1C) bits. The MMU interrupt handling code clears any exceptions, but does so by masking out any other bits and writing the result back. There are some important control bits in that register, including MMU_ENABLE, so a safer approach is to simply write back the value just read unaltered. Signed-off-by:
Phil Elwell <phil@raspberrypi.org> Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by:
Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by:
-
Phil Elwell authored
Both coherent_dma_mask and dma_mask act as constraints on allocations and bounce buffer usage, so be sure to set dma_mask to the appropriate value otherwise the effective mask could be incorrect. Signed-off-by:
-
Nicolas Saenz Julienne authored
Aside from being more correct, the non optional version of the function prints an error when failing to find the IRQ. Signed-off-by:
-
Thomas Zimmermann authored
Using struct drm_device.pdev is deprecated. Convert vmwgfx to struct drm_device.dev. No functional changes. Signed-off-by:
Zack Rusin <zackr@vmware.com> Acked-by:
-
Thomas Zimmermann authored
Using struct drm_device.pdev is deprecated. Convert virtgpu to struct drm_device.dev. No functional changes. Signed-off-by:
-
